-*- mode: Pod; buffer-read-only: t -*- !!!!!!! DO NOT EDIT THIS FILE !!!!!!! This file is built by autodoc.pl extracting documentation from the C source files. Any changes made here will be lost! =head1 NAME perlintern - autogenerated documentation of purely B Perl functions =head1 DESCRIPTION X X This file is the autogenerated documentation of functions in the Perl interpreter that are documented using Perl's internal documentation format but are not marked as part of the Perl API. In other words, B! It has the same sections as L, though some may be empty. =head1 AV Handling =over 4 =item C X This is a cut-down version of av_fetch that assumes that the array is very straightforward - no magic, not readonly, and AvREAL - and that C is not negative. This function MUST NOT be used in situations where any of those assumptions may not hold. Returns the SV at the specified index in the array. The C is the index. If lval is true, you are guaranteed to get a real SV back (in case it wasn't real before), which you can then modify. Check that the return value is non-null before dereferencing it to a C. The rough perl equivalent is C<$myarray[$key]>. =over 3 SV ** av_fetch_simple(AV *av, SSize_t key, I32 lval) =back =back =for hackers Found in file inline.h =over 4 =item C X If the array C is empty, this returns -1; otherwise it returns the maximum value of the indices of all the array elements which are currently defined in C. It does not handle magic, hence the C

private indication in its name. =over 3 SSize_t AvFILLp(AV* av) =back =back =for hackers Found in file av.h =over 4 =item C X This implements L> and L>, which are the public API for this functionality. Creates a new AV and allocates its SV* array. This is similar to, but more efficient than doing: AV *av = newAV(); av_extend(av, key); The size parameter is used to pre-allocate a SV* array large enough to hold at least elements C<0..(size-1)>. C must be at least 1. The C parameter controls whether or not the array is NULL initialized. =over 3 AV * av_new_alloc(SSize_t size, bool zeroflag) =back =back =for hackers Found in file inline.h =over 4 =item C X This is a cut-down version of av_store that assumes that the array is very straightforward - no magic, not readonly, and AvREAL - and that C is not negative. This function MUST NOT be used in situations where any of those assumptions may not hold. Stores an SV in an array. The array index is specified as C. It can be dereferenced to get the C that was stored there (= C)). Note that the caller is responsible for suitably incrementing the reference count of C before the call. Approximate Perl equivalent: C. =over 3 SV ** av_store_simple(AV *av, SSize_t key, SV *val) =back =back =for hackers Found in file inline.h =head1 Callback Functions =over 4 =item C X C> It is planned to remove C from a future release of Perl. Do not use it for new code; remove it from existing code. Implements the deprecated L>. =over 3 U8 dowantarray() =back =back =for hackers Found in file pp_ctl.c =over 4 =item C X Implements C which you should use instead. =over 3 void leave_scope(I32 base) =back =back =for hackers Found in file scope.c =over 4 =item C X This function is called via magic to implement the C and C functions. It should not be called directly and has no user servicable parts. =over 3 int magic_freedestruct(SV *sv, MAGIC *mg) =back =back =for hackers Found in file scope.c =over 4 =item C X This function arranges for a C function reference to be called at the B with the arguments provided. It is a wrapper around C which ensures that the latter function is called appropriately. Be aware that there is a signficant difference in timing between the I and the I. If you are looking for a mechanism to trigger a function at the end of the B you should look at L> instead of this function. =over 3 void mortal_svfunc_x(SVFUNC_t f, SV *p) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements L> =over 3 void pop_scope() =back =back =for hackers Found in file scope.c =over 4 =item C X Implements L> =over 3 void push_scope() =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. =over 3 void save_adelete(AV *av, SSize_t key) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. Saves and frees a refcounted string. Calls rcpv_free() on the argument when the current pseudo block is finished. =over 3 void save_freercpv(char *rcpv) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. Like save_pptr(), but also Safefree()s the new value if it is different from the old one. Can be used to restore a global char* to its prior contents, freeing new value. =over 3 void save_generic_pvref(char **str) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. Like save_sptr(), but also SvREFCNT_dec()s the new value. Can be used to restore a global SV to its prior contents, freeing new value. =over 3 void save_generic_svref(SV **sptr) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. =over 3 void save_hdelete(HV *hv, SV *keysv) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. =over 3 void save_hints() =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. =over 3 void save_op() =back =back =for hackers Found in file scope.h =over 4 =item C X Implements C. =over 3 void save_padsv_and_mortalize(PADOFFSET off) =back =back =for hackers Found in file scope.c =over 4 =item C X The refcnt of object C will be decremented at the end of the current I. C gives the type of C, expressed as one of the constants in F whose name begins with C. This is the underlying implementation of several macros, like C. =over 3 void save_pushptr(void * const ptr, const int type) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. Saves and restores a refcounted string, similar to what save_generic_svref would do for a SV*. Can be used to restore a refcounted string to its previous state. Performs the appropriate refcount counting so that nothing should leak or be prematurely freed. =over 3 void save_rcpv(char **prcpv) =back =back =for hackers Found in file scope.c =over 4 =item C X A helper function for localizing the SV referenced by C<*sptr>. If C is set in in C, the function returns the input scalar untouched. Otherwise it replaces C<*sptr> with a new C scalar, and returns that. The new scalar will have the old one's magic (if any) copied to it. If there is such magic, and C is set in in C, 'set' magic will be processed on the new scalar. If unset, 'set' magic will be skipped. The latter typically means that assignment will soon follow (I, S>), and that will handle the magic. =over 3 SV * save_scalar_at(SV **sptr, const U32 flags) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. Set the SvFLAGS specified by mask to the values in val =over 3 void save_set_svflags(SV *sv, U32 mask, U32 val) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. Like save_generic_pvref(), but uses PerlMemShared_free() rather than Safefree(). Can be used to restore a shared global char* to its prior contents, freeing new value. =over 3 void save_shared_pvref(char **str) =back =back =for hackers Found in file scope.c =over 4 =item C X Implements C. =over 3 void save_vptr(void *ptr) =back =back =for hackers Found in file scope.c =head1 Casting X There are currently no internal API items in Casting =head1 Character case changing There are currently no internal API items in Character case changing =head1 Character classification There are currently no internal API items in Character classification =head1 Compiler and Preprocessor information There are currently no internal API items in Compiler and Preprocessor information =head1 Compiler directives There are currently no internal API items in Compiler directives =head1 Compile-time scope hooks =over 4 =item C X NOTE: C is B and may change or be removed without notice. Return an entry from the BHK structure. C is a preprocessor token indicating which entry to return. If the appropriate flag is not set this will return C. The type of the return value depends on which entry you ask for. =over 3 void * BhkENTRY(BHK *hk, token which) =back =back =for hackers Found in file op.h =over 4 =item C X NOTE: C is B and may change or be removed without notice. Return the BHK's flags. =over 3 U32 BhkFLAGS(BHK *hk) =back =back =for hackers Found in file op.h =over 4 =item C X NOTE: C is B and may change or be removed without notice. Call all the registered block hooks for type C. C is a preprocessing token; the type of C depends on C. =over 3 void CALL_BLOCK_HOOKS(token which, arg) =back =back =for hackers Found in file op.h =head1 Concurrency =over 4 =item C =item C =item C Described in L. =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =over 3 CX_CUR() =back =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =over 3 void CX_LEAVE_SCOPE(PERL_CONTEXT* cx) =back =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =over 3 void CX_POP(PERL_CONTEXT* cx) =back =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =back =for hackers Found in file pod/perlguts.pod =over 4 =item C =item C =item C =item C =item C =item C =item C =item C =item C =item C =item C =item C =item C Described in L. =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =over 3 void dounwind(I32 cxix) =back =back =for hackers Found in file pod/perlguts.pod =over 4 =item C X This is for the use of C as a wrapper for the C library L on some platforms to hide some platform quirks. It should not be used except through C. =over 3 Pid_t my_fork() =back =back =for hackers Found in file util.c =over 4 =item C Described in L. =back =for hackers Found in file pod/perlguts.pod =head1 COPs and Hint Hashes There are currently no internal API items in COPs and Hint Hashes =head1 Custom Operators =over 4 =item C X This function assigns the prototype of the named core function to C, or to a new mortal SV if C is C. It returns the modified C, or C if the core function has no prototype. C`is a code as returned by C. It must not be equal to 0. =over 3 SV * core_prototype(SV *sv, const char *name, const int code, int * const opnum) =back =back =for hackers Found in file op.c =head1 CV Handling =over 4 =item C X If true, indicates that the C member contains an SV pointer whose reference count should be decremented when the CV itself is freed. In addition, C will increment the reference count, and C will duplicate the entire pointed-to SV if this flag is set. Any CV that wraps an XSUB has an C union that the XSUB function is free to use for its own purposes. It may be the case that the code wishes to store an SV in the C member of this union. By setting this flag, this SV reference will be properly reclaimed or duplicated when the CV itself is. =over 3 bool CvREFCOUNTED_ANYSV(CV *cv) =back =back =for hackers Found in file cv.h =over 4 =item C X Helper macro to turn off the C flag. =over 3 void CvREFCOUNTED_ANYSV_off(CV *cv) =back =back =for hackers Found in file cv.h =over 4 =item C X Helper macro to turn on the C flag. =over 3 void CvREFCOUNTED_ANYSV_on(CV *cv) =back =back =for hackers Found in file cv.h =over 4 =item C X Each CV has a pointer, C, to its lexically enclosing CV (if any). Because pointers to anonymous sub prototypes are stored in C<&> pad slots, it is a possible to get a circular reference, with the parent pointing to the child and vice-versa. To avoid the ensuing memory leak, we do not increment the reference count of the CV pointed to by C in the I that the parent has a C<&> pad slot pointing back to us. In this case, we set the C flag in the child. This allows us to determine under what circumstances we should decrement the refcount of the parent when freeing the child. There is a further complication with non-closure anonymous subs (i.e. those that do not refer to any lexicals outside that sub). In this case, the anonymous prototype is shared rather than being cloned. This has the consequence that the parent may be freed while there are still active children, I, BEGIN { $a = sub { eval '$x' } } In this case, the BEGIN is freed immediately after execution since there are no active references to it: the anon sub prototype has C set since it's not a closure, and $a points to the same CV, so it doesn't contribute to BEGIN's refcount either. When $a is executed, the C causes the chain of Cs to be followed, and the freed BEGIN is accessed. To avoid this, whenever a CV and its associated pad is freed, any C<&> entries in the pad are explicitly removed from the pad, and if the refcount of the pointed-to anon sub is still positive, then that child's C is set to point to its grandparent. This will only occur in the single specific case of a non-closure anon prototype having one or more active references (such as C<$a> above). One other thing to consider is that a CV may be merely undefined rather than freed, eg C. In this case, its refcount may not have reached zero, but we still delete its pad and its C etc. Since various children may still have their C pointing at this undefined CV, we keep its own C for the time being, so that the chain of lexical scopes is unbroken. For example, the following should print 123: my $x = 123; sub tmp { sub { eval '$x' } } my $a = tmp(); undef &tmp; print $a->(); =over 3 bool CvWEAKOUTSIDE(CV *cv) =back =back =for hackers Found in file cv.h =over 4 =item C X Interpose, for the current op and RUNOPS loop, - a new JMPENV stack catch frame, and - an inner RUNOPS loop to run all the remaining ops following the current PL_op. Then handle any exceptions raised while in that loop. For a caught eval at this level, re-enter the loop with the specified restart op (i.e. the op following the OP_LEAVETRY etc); otherwise re-throw the exception. docatch() is intended to be used like this: PP(pp_entertry) { if (CATCH_GET) return docatch(Perl_pp_entertry); ... rest of function ... return PL_op->op_next; } If a new catch frame isn't needed, the op behaves normally. Otherwise it calls docatch(), which recursively calls pp_entertry(), this time with CATCH_GET() false, so the rest of the body of the entertry is run. Then docatch() calls CALLRUNOPS() which executes all the ops following the entertry. When the loop finally finishes, control returns to docatch(), which pops the JMPENV and returns to the parent pp_entertry(), which itself immediately returns. Note that *all* subsequent ops are run within the inner RUNOPS loop, not just the body of the eval. For example, in sub TIEARRAY { eval {1}; my $x } tie @a, "main"; at the point the 'my' is executed, the C stack will look something like: #10 main() #9 perl_run() # JMPENV_PUSH level 1 here #8 S_run_body() #7 Perl_runops_standard() # main RUNOPS loop #6 Perl_pp_tie() #5 Perl_call_sv() #4 Perl_runops_standard() # unguarded RUNOPS loop: no new JMPENV #3 Perl_pp_entertry() #2 S_docatch() # JMPENV_PUSH level 2 here #1 Perl_runops_standard() # docatch()'s RUNOPs loop #0 Perl_pp_padsv() Basically, any section of the perl core which starts a RUNOPS loop may make a promise that it will catch any exceptions and restart the loop if necessary. If it's not prepared to do that (like call_sv() isn't), then it sets CATCH_GET() to true, so that any later eval-like code knows to set up a new handler and loop (via docatch()). See L for further details. =over 3 OP * docatch(Perl_ppaddr_t firstpp) =back =back =for hackers Found in file pp_ctl.c =head1 Debugging =over 4 =item C X Some functions when compiled under DEBUGGING take an extra final argument named C, indicating the C stack depth. This argument is omitted otherwise. This macro expands to either S> under DEBUGGING, or to nothing at all when not under DEBUGGING, reducing the number of C<#ifdef>'s in the code. The program is responsible for maintaining the correct value for C. =over 3 comma_aDEPTH =back =back =for hackers Found in file perl.h =over 4 =item C X This is used in the prototype declarations for functions that take a L> final parameter, much like L|perlguts/Background and MULTIPLICITY> is used in functions that take a thread context initial parameter. =back =for hackers Found in file perl.h =over 4 =item C X Implements B<-Dt> perl command line option on OP C. =over 3 I32 debop(const OP *o) =back =back =for hackers Found in file dump.c =over 4 =item C X Called to indicate that C was executed, for profiling purposes under the C<-DP> command line option. =over 3 void debprof(const OP *o) =back =back =for hackers Found in file dump.c =over 4 =item C X Dumps the contents of the data collected by the C<-DP> perl command line option. =over 3 void debprofdump() =back =back =for hackers Found in file dump.c =over 4 =item C X Same as L> but with no leading argument. Intended for functions with no normal arguments, and used by L> itself. =over 3 debug_aDEPTH =back =back =for hackers Found in file perl.h =over 4 =item C X Same as L> but with no leading argument. Intended for functions with no normal arguments, and used by L> itself. =over 3 debug_pDEPTH =back =back =for hackers Found in file perl.h =over 4 =item C X Deallocates a backtrace received from get_c_backtrace. =over 3 void free_c_backtrace(Perl_c_backtrace *bt) =back =back =for hackers Found in file util.c =over 4 =item C X Collects the backtrace (aka "stacktrace") into a single linear malloced buffer, which the caller B C. Scans the frames back by S>, then drops the C innermost, returning at most C frames. =over 3 Perl_c_backtrace * get_c_backtrace(int max_depth, int skip) =back =back =for hackers Found in file util.c =over 4 =item C X When Perl is run in debugging mode, with the B<-d> switch, this SV is a boolean which indicates whether subs are being single-stepped. Single-stepping is automatically turned on after every step. This is the C variable which corresponds to Perl's $DB::single variable. See C>. On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy. =over 3 SV * PL_DBsingle =back =back =for hackers Found in file intrpvar.h =over 4 =item C X When Perl is run in debugging mode, with the B<-d> switch, this GV contains the SV which holds the name of the sub being debugged. This is the C variable which corresponds to Perl's $DB::sub variable. See C>. On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy. =over 3 GV * PL_DBsub =back =back =for hackers Found in file intrpvar.h =over 4 =item C X Trace variable used when Perl is run in debugging mode, with the B<-d> switch. This is the C variable which corresponds to Perl's $DB::trace variable. See C>. On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy. =over 3 SV * PL_DBtrace =back =back =for hackers Found in file intrpvar.h =over 4 =item C Described in L. =over 3 int runops_debug() =back =back =for hackers Found in file pod/perlguts.pod =over 4 =item C Described in L. =over 3 int runops_standard() =back =back =for hackers Found in file pod/perlguts.pod =head1 Display functions XXX =over 4 =item C X Implements C =over 3 char * sv_peek(SV *sv) =back =back =for hackers Found in file dump.c =head1 Embedding, Threads, and Interpreter Cloning =over 4 =item C X dump the contents of a CV =over 3 void cv_dump(const CV *cv, const char *title) =back =back =for hackers Found in file pad.c =over 4 =item C X When a CV has a reference count on its slab (C), it is responsible for making sure it is freed. (Hence, no two CVs should ever have a reference count on the same slab.) The CV only needs to reference the slab during compilation. Once it is compiled and C attached, it has finished its job, so it can forget the slab. =over 3 void cv_forget_slab(CV *cv) =back =back =for hackers Found in file pad.c =over 4 =item C X Dump the contents of a padlist =over 3 void do_dump_pad(I32 level, PerlIO *file, PADLIST *padlist, int full) =back =back =for hackers Found in file pad.c =over 4 =item C X Implements L>, which you should use instead. =over 3 void * get_context() =back =back =for hackers Found in file inline.h =over 4 =item C X Allocates a place in the currently-compiling pad (via L) and then stores a name for that entry. C is adopted and becomes the name entry; it must already contain the name string. C and C and the C flag gets added to C. None of the other processing of L is done. Returns the offset of the allocated pad slot. =over 3 PADOFFSET pad_alloc_name(PADNAME *name, U32 flags, HV *typestash, HV *ourstash) =back =back =for hackers Found in file pad.c =over 4 =item C X Update the pad compilation state variables on entry to a new block. =over 3 void pad_block_start(int full) =back =back =for hackers Found in file pad.c =over 4 =item C X Check for duplicate declarations: report any of: * a 'my' in the current scope with the same name; * an 'our' (anywhere in the pad) with the same name and the same stash as 'ourstash' C indicates that the name to check is an C<"our"> declaration. =over 3 void pad_check_dup(PADNAME *name, U32 flags, const HV *ourstash) =back =back =for hackers Found in file pad.c =over 4 =item C X Find a named lexical anywhere in a chain of nested pads. Add fake entries in the inner pads if it's found in an outer one. Returns the offset in the bottom pad of the lex or the fake lex. C is the CV in which to start the search, and seq is the current C to match against. If C is true, print appropriate warnings. The C* vars return values, and so are pointers to where the returned values should be stored. C, if non-null, requests that the innermost instance of the lexical is captured; C is set to the innermost matched pad name or fake pad name; C returns the flags normally associated with the C field of a fake pad name. Note that C is recursive; it recurses up the chain of CVs, then comes back down, adding fake entries as it goes. It has to be this way because fake names in anon prototypes have to store in C the index into the parent pad. =over 3 PADOFFSET pad_findlex(const char *namepv, STRLEN namelen, U32 flags, const CV *cv, U32 seq, int warn, SV **out_capture, PADNAME **out_name, int *out_flags) =back =back =for hackers Found in file pad.c =over 4 =item C X For any anon CVs in the pad, change C of that CV from C to C if necessary. Needed when a newly-compiled CV has to be moved to a pre-existing CV struct. =over 3 void pad_fixup_inner_anons(PADLIST *padlist, CV *old_cv, CV *new_cv) =back =back =for hackers Found in file pad.c =over 4 =item C X Free the SV at offset po in the current pad. =over 3 void pad_free(PADOFFSET po) =back =back =for hackers Found in file pad.c =over 4 =item C X Cleanup at end of scope during compilation: set the max seq number for lexicals in this scope and warn of any lexicals that never got introduced. =over 3 OP * pad_leavemy() =back =back =for hackers Found in file pad.c =over 4 =item C X Duplicates a pad. =over 3 PADLIST * padlist_dup(PADLIST *srcpad, CLONE_PARAMS *param) =back =back =for hackers Found in file pad.c =over 4 =item C X Duplicates a pad name. =over 3 PADNAME * padname_dup(PADNAME *src, CLONE_PARAMS *param) =back =back =for hackers Found in file pad.c =over 4 =item C X Duplicates a pad name list. =over 3 PADNAMELIST * padnamelist_dup(PADNAMELIST *srcpad, CLONE_PARAMS *param) =back =back =for hackers Found in file pad.c =over 4 =item C X Push a new pad frame onto the padlist, unless there's already a pad at this depth, in which case don't bother creating a new one. Then give the new pad an C<@_> in slot zero. =over 3 void pad_push(PADLIST *padlist, int depth) =back =back =for hackers Found in file pad.c =over 4 =item C X Mark all the current temporaries for reuse =over 3 void pad_reset() =back =back =for hackers Found in file pad.c =over 4 =item C X Set the value at offset C in the current (compiling or executing) pad. Use the macro C rather than calling this function directly. =over 3 void pad_setsv(PADOFFSET po, SV *sv) =back =back =for hackers Found in file pad.c =over 4 =item C X Get the value at offset C in the current (compiling or executing) pad. Use macro C instead of calling this function directly. =over 3 SV * pad_sv(PADOFFSET po) =back =back =for hackers Found in file pad.c =over 4 =item C X Abandon the tmp in the current pad at offset C and replace with a new one. =over 3 void pad_swipe(PADOFFSET po, bool refadjust) =back =back =for hackers Found in file pad.c =over 4 =item C X Implements L>, which you should use instead. =over 3 void set_context(void *t) =back =back =for hackers Found in file util.c =over 4 =item C X Duplicate a stack info structure, returning a pointer to the cloned object. =over 3 PERL_SI * si_dup(PERL_SI *si, CLONE_PARAMS *param) =back =back =for hackers Found in file sv.c =over 4 =item C X Duplicate the save stack, returning a pointer to the cloned object. =over 3 ANY * ss_dup(PerlInterpreter *proto_perl, CLONE_PARAMS *param) =back =back =for hackers Found in file sv.c =head1 Errno =over 4 =item C X Declare variables needed to save C and any operating system specific error number. =over 3 void dSAVEDERRNO =back =back =for hackers Found in file perl.h =over 4 =item C X Declare variables needed to save C and any operating system specific error number, and save them for optional later restoration by C. =over 3 void dSAVE_ERRNO =back =back =for hackers Found in file perl.h =over 4 =item C X Restore C and any operating system specific error number that was saved by C or C. =over 3 void RESTORE_ERRNO =back =back =for hackers Found in file perl.h =over 4 =item C X Save C and any operating system specific error number for optional later restoration by C. Requires C or C in scope. =over 3 void SAVE_ERRNO =back =back =for hackers Found in file perl.h =over 4 =item C X Set C, and on VMS set C. =over 3 void SETERRNO(int errcode, int vmserrcode) =back =back =for hackers Found in file perl.h =head1 Exception Handling (simple) Macros There are currently no internal API items in Exception Handling (simple) Macros =head1 Filesystem configuration values There are currently no internal API items in Filesystem configuration values =head1 Floating point There are currently no internal API items in Floating point =head1 General Configuration There are currently no internal API items in General Configuration =head1 Global Variables There are currently no internal API items in Global Variables =head1 GV Handling and Stashes X =over 4 =item C X Check C to see if the overloaded (active magic) operation C applies to it. If the sv is not SvROK or it is not an object then returns false, otherwise checks if the object is blessed into a class supporting overloaded operations, and returns true if a call to amagic_call() with this SV and the given method would trigger an amagic operation, including via the overload fallback rules or via nomethod. Thus a call like: amagic_applies(sv, string_amg, AMG_unary) would return true for an object with overloading set up in any of the following ways: use overload q("") => sub { ... }; use overload q(0+) => sub { ... }, fallback => 1; and could be used to tell if a given object would stringify to something other than the normal default ref stringification. Note that the fact that this function returns TRUE does not mean you can succesfully perform the operation with amagic_call(), for instance any overloaded method might throw a fatal exception, however if this function returns FALSE you can be confident that it will NOT perform the given overload operation. C is an integer enum, one of the values found in F, for instance C. C should be set to AMG_unary for unary operations. =over 3 bool amagic_applies(SV *sv, int method, int flags) =back =back =for hackers Found in file gv.c =over 4 =item C X Duplicate a typeglob, returning a pointer to the cloned object. =over 3 GP * gp_dup(GP * const gp, CLONE_PARAMS * const param) =back =back =for hackers Found in file sv.c =over 4 =item C X Implements C, which you should use instead =over 3 CV * gv_handler(HV *stash, I32 id) =back =back =for hackers Found in file gv.c =over 4 =item C X Returns a pointer to the stash for a specified package, possibly cached. Implements both L> and L>. Requires one of either C or C to be non-null. If the flag C is set, return the stash only if found in the cache; see L> for details on the other C. Note it is strongly preferred for C to be non-null, for performance reasons. =over 3 HV * gv_stashsvpvn_cached(SV *namesv, const char *name, U32 namelen, I32 flags) =back =back =for hackers Found in file gv.c =over 4 =item C X NOTE: C is B and may change or be removed without notice. If the typeglob C can be expressed more succinctly, by having something other than a real GV in its place in the stash, replace it with the optimised form. Basic requirements for this are that C is a real typeglob, is sufficiently ordinary, and is only referenced from its package. This function is meant to be used when a GV has been looked up in part to see what was there, causing upgrading, but based on what was found it turns out that the real GV isn't required after all. If C is a completely empty typeglob, it is deleted from the stash. If C is a typeglob containing only a sufficiently-ordinary constant sub, the typeglob is replaced with a scalar-reference placeholder that more compactly represents the same thing. =over 3 void gv_try_downgrade(GV *gv) =back =back =for hackers Found in file gv.c =head1 Hook manipulation There are currently no internal API items in Hook manipulation =head1 HV Handling X =over 4 =item C X Implements C which you should use instead. NOTE: C must be explicitly called as C with an C parameter. =over 3 HE ** Perl_hv_eiter_p(pTHX_ HV *hv) =back =back =for hackers Found in file hv.c =over 4 =item C X Implements C which you should use instead. NOTE: C must be explicitly called as C with an C parameter. =over 3 void Perl_hv_eiter_set(pTHX_ HV *hv, HE *eiter) =back =back =for hackers Found in file hv.c =over 4 =item C X Adds a name to a stash's internal list of effective names. See C>. This is called when a stash is assigned to a new location in the symbol table. =over 3 void hv_ename_add(HV *hv, const char *name, U32 len, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Removes a name from a stash's internal list of effective names. If this is the name returned by C, then another name in the list will take its place (C will use it). This is called when a stash is deleted from the symbol table. =over 3 void hv_ename_delete(HV *hv, const char *name, U32 len, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Returns the number of hash buckets that happen to be in use. This function implements the L macro|perlapi/HvFILL> which you should use instead. As of perl 5.25 this function is used only for debugging purposes, and the number of used hash buckets is not in any way cached, thus this function can be costly to execute as it must iterate over all the buckets in the hash. NOTE: C must be explicitly called as C with an C parameter. =over 3 STRLEN Perl_hv_fill(pTHX_ HV * const hv) =back =back =for hackers Found in file hv.c =over 4 =item C X Implements C, which you should use instead. NOTE: C must be explicitly called as C with an C parameter. =over 3 I32 Perl_hv_placeholders_get(pTHX_ const HV *hv) =back =back =for hackers Found in file hv.c =over 4 =item C X Implements C, which you should use instead. NOTE: C must be explicitly called as C with an C parameter. =over 3 void Perl_hv_placeholders_set(pTHX_ HV *hv, I32 ph) =back =back =for hackers Found in file hv.c =over 4 =item C X Implements C which you should use instead. NOTE: C must be explicitly called as C with an C parameter. =over 3 I32 * Perl_hv_riter_p(pTHX_ HV *hv) =back =back =for hackers Found in file hv.c =over 4 =item C X Implements C which you should use instead. NOTE: C must be explicitly called as C with an C parameter. =over 3 void Perl_hv_riter_set(pTHX_ HV *hv, I32 riter) =back =back =for hackers Found in file hv.c =over 4 =item C X Generates and returns a C representing the content of a C chain. C is currently unused and must be zero. =over 3 HV * refcounted_he_chain_2hv(const struct refcounted_he *c, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Like L, but takes a nul-terminated string instead of a string/length pair. =over 3 SV * refcounted_he_fetch_pv(const struct refcounted_he *chain, const char *key, U32 hash, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Search along a C chain for an entry with the key specified by C and C. If C has the C bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C is a precomputed hash of the key string, or zero if it has not been precomputed. Returns a mortal scalar representing the value associated with the key, or C<&PL_sv_placeholder> if there is no value associated with the key. =over 3 SV * refcounted_he_fetch_pvn(const struct refcounted_he *chain, const char *keypv, STRLEN keylen, U32 hash, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Like L, but takes a literal string instead of a string/length pair, and no precomputed hash. =over 3 SV * refcounted_he_fetch_pvs(const struct refcounted_he *chain, "key", U32 flags) =back =back =for hackers Found in file hv.h =over 4 =item C X Like L, but takes a Perl scalar instead of a string/length pair. =over 3 SV * refcounted_he_fetch_sv(const struct refcounted_he *chain, SV *key, U32 hash, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Decrements the reference count of a C by one. If the reference count reaches zero the structure's memory is freed, which (recursively) causes a reduction of its parent C's reference count. It is safe to pass a null pointer to this function: no action occurs in this case. =over 3 void refcounted_he_free(struct refcounted_he *he) =back =back =for hackers Found in file hv.c =over 4 =item C X Increment the reference count of a C. The pointer to the C is also returned. It is safe to pass a null pointer to this function: no action occurs and a null pointer is returned. =over 3 struct refcounted_he * refcounted_he_inc( struct refcounted_he *he) =back =back =for hackers Found in file hv.c =over 4 =item C X Like L, but takes a nul-terminated string instead of a string/length pair. =over 3 struct refcounted_he * refcounted_he_new_pv( struct refcounted_he *parent, const char *key, U32 hash, SV *value, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Creates a new C. This consists of a single key/value pair and a reference to an existing C chain (which may be empty), and thus forms a longer chain. When using the longer chain, the new key/value pair takes precedence over any entry for the same key further along the chain. The new key is specified by C and C. If C has the C bit set, the key octets are interpreted as UTF-8, otherwise they are interpreted as Latin-1. C is a precomputed hash of the key string, or zero if it has not been precomputed. C is the scalar value to store for this key. C is copied by this function, which thus does not take ownership of any reference to it, and later changes to the scalar will not be reflected in the value visible in the C. Complex types of scalar will not be stored with referential integrity, but will be coerced to strings. C may be either null or C<&PL_sv_placeholder> to indicate that no value is to be associated with the key; this, as with any non-null value, takes precedence over the existence of a value for the key further along the chain. C points to the rest of the C chain to be attached to the new C. This function takes ownership of one reference to C, and returns one reference to the new C. =over 3 struct refcounted_he * refcounted_he_new_pvn( struct refcounted_he *parent, const char *keypv, STRLEN keylen, U32 hash, SV *value, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X Like L, but takes a literal string instead of a string/length pair, and no precomputed hash. =over 3 struct refcounted_he * refcounted_he_new_pvs( struct refcounted_he *parent, "key", SV *value, U32 flags) =back =back =for hackers Found in file hv.h =over 4 =item C X Like L, but takes a Perl scalar instead of a string/length pair. =over 3 struct refcounted_he * refcounted_he_new_sv( struct refcounted_he *parent, SV *key, U32 hash, SV *value, U32 flags) =back =back =for hackers Found in file hv.c =over 4 =item C X If no one has access to shared string C with length C, free it. C and C must both be valid for C. =over 3 void unsharepvn(const char *sv, I32 len, U32 hash) =back =back =for hackers Found in file hv.c =head1 Input/Output =over 4 =item C X Duplicate a directory handle, returning a pointer to the cloned object. =over 3 DIR * dirp_dup(DIR * const dp, CLONE_PARAMS * const param) =back =back =for hackers Found in file sv.c =over 4 =item C X Duplicate a file handle, returning a pointer to the cloned object. =over 3 PerlIO * fp_dup(PerlIO * const fp, const char type, CLONE_PARAMS * const param) =back =back =for hackers Found in file sv.c =over 4 =item C X Implements C on some platforms. =over 3 I32 my_fflush_all() =back =back =for hackers Found in file util.c =over 4 =item C X The C library C> if available, or a Perl implementation of it. NOTE: C must be explicitly called as C . =over 3 int Perl_my_mkostemp(char *templte, int flags) =back =back =for hackers Found in file util.c =over 4 =item C X The C library C> if available, or a Perl implementation of it. NOTE: C must be explicitly called as C . =over 3 int Perl_my_mkstemp(char *templte) =back =back =for hackers Found in file util.c =over 4 =item C X The GV which was last used for a filehandle input operation. (C<< >>) On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy. =over 3 GV* PL_last_in_gv =back =back =for hackers Found in file intrpvar.h =over 4 =item C X The glob containing the output field separator - C<*,> in Perl space. On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy. =over 3 GV* PL_ofsgv =back =back =for hackers Found in file intrpvar.h =over 4 =item C X The input record separator - C<$/> in Perl space. On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy. =over 3 SV* PL_rs =back =back =for hackers Found in file intrpvar.h =over 4 =item C X NOTE: C is B and may change or be removed without notice. Function called by C to spawn a glob (or do the glob inside perl on VMS). This code used to be inline, but now perl uses C this glob starter is only used by miniperl during the build process, or when PERL_EXTERNAL_GLOB is defined. Moving it away shrinks F; shrinking F helps speed perl up. NOTE: C must be explicitly called as C with an C parameter. =over 3 PerlIO * Perl_start_glob(pTHX_ SV *tmpglob, IO *io) =back =back =for hackers Found in file doio.c =head1 Integer There are currently no internal API items in Integer =head1 I/O Formats There are currently no internal API items in I/O Formats =head1 Lexer interface =over 4 =item C X Resumes a buffer previously suspended by the C function, in a way that will be re-suspended at the end of the scope so it can be used again later. This should be used within an C/C scoped pair. =over 3 void resume_compcv_and_save(struct suspended_compcv *buffer) =back =back =for hackers Found in file pad.c =over 4 =item C X Resumes the parser state previously saved using the C function for a final time before being compiled into a full CV. This should be used within an C/C scoped pair. =over 3 void resume_compcv_final(struct suspended_compcv *buffer) =back =back =for hackers Found in file pad.c =over 4 =item C X NOTE: C is B and may change or be removed without notice. This function performs syntax checking on a prototype, C. If C is true, any illegal characters or mismatched brackets will trigger illegalproto warnings, declaring that they were detected in the prototype for C. The return value is C if this is a valid prototype, and C if it is not, regardless of whether C was C or C. Note that C is a valid C and will always return C. =over 3 bool validate_proto(SV *name, SV *proto, bool warn, bool curstash) =back =back =for hackers Found in file toke.c =head1 Locales There are currently no internal API items in Locales =head1 Magic =over 4 =item C X Triggered by a delete from C<%^H>, records the key to C. =over 3 int magic_clearhint(SV *sv, MAGIC *mg) =back =back =for hackers Found in file mg.c =over 4 =item C X Triggered by clearing C<%^H>, resets C. =over 3 int magic_clearhints(SV *sv, MAGIC *mg) =back =back =for hackers Found in file mg.c =over 4 =item C X Invoke a magic method (like FETCH). C and C are the tied thingy and the tie magic. C is the name of the method to call. C is the number of args (in addition to $self) to pass to the method. The C can be: G_DISCARD invoke method with G_DISCARD flag and don't return a value G_UNDEF_FILL fill the stack with argc pointers to PL_sv_undef The arguments themselves are any values following the C argument. Returns the SV (if any) returned by the method, or C on failure. NOTE: C must be explicitly called as C with an C parameter. =over 3 SV * Perl_magic_methcall(pTHX_ SV *sv, const MAGIC *mg, SV *meth, U32 flags, U32 argc, ...) =back =back =for hackers Found in file mg.c =over 4 =item C X Triggered by a store to C<%^H>, records the key/value pair to C. It is assumed that hints aren't storing anything that would need a deep copy. Maybe we should warn if we find a reference. =over 3 int magic_sethint(SV *sv, MAGIC *mg) =back =back =for hackers Found in file mg.c =over 4 =item C X Duplicate a chain of magic, returning a pointer to the cloned object. =over 3 MAGIC * mg_dup(MAGIC *mg, CLONE_PARAMS * const param) =back =back =for hackers Found in file sv.c =over 4 =item C X Copy some of the magic from an existing SV to new localized version of that SV. Container magic (I, C<%ENV>, C<$1>, C) gets copied, value magic doesn't (I, C, C). If C is false then no set magic will be called on the new (empty) SV. This typically means that assignment will soon follow (e.g. S>), and that will handle the magic. =over 3 void mg_localize(SV *sv, SV *nsv, bool setmagic) =back =back =for hackers Found in file mg.c =head1 Memory Management =over 4 =item C X Implements L> which you should use instead. NOTE: C must be explicitly called as C . =over 3 Malloc_t Perl_calloc(MEM_SIZE elements, MEM_SIZE size) =back =back =for hackers Found in file malloc.c =over 4 =item C X Implements L> which you should use instead. NOTE: C must be explicitly called as C . =over 3 Malloc_t Perl_malloc(MEM_SIZE nbytes) =back =back =for hackers Found in file malloc.c =over 4 =item C X Implements L> which you should use instead. NOTE: C must be explicitly called as C . =over 3 Free_t Perl_mfree(Malloc_t where) =back =back =for hackers Found in file malloc.c =over 4 =item C X Implements L> which you should use instead. NOTE: C must be explicitly called as C . =over 3 Malloc_t Perl_realloc(Malloc_t where, MEM_SIZE nbytes) =back =back =for hackers Found in file malloc.c =head1 MRO =over 4 =item C X Returns the Depth-First Search linearization of C<@ISA> the given stash. The return value is a read-only AV* whose elements are string SVs giving class names. C should be 0 (it is used internally in this function's recursion). You are responsible for C on the return value if you plan to store it anywhere semi-permanently (otherwise it might be deleted out from under you the next time the cache is invalidated). =over 3 AV * mro_get_linear_isa_dfs(HV *stash, U32 level) =back =back =for hackers Found in file mro_core.c =over 4 =item C X Takes the necessary steps (cache invalidations, mostly) when the C<@ISA> of the given package has changed. Invoked by the C magic, should not need to invoke directly. =over 3 void mro_isa_changed_in(HV *stash) =back =back =for hackers Found in file mro_core.c =over 4 =item C X Call this function to signal to a stash that it has been assigned to another spot in the stash hierarchy. C is the stash that has been assigned. C is the stash it replaces, if any. C is the glob that is actually being assigned to. This can also be called with a null first argument to indicate that C has been deleted. This function invalidates isa caches on the old stash, on all subpackages nested inside it, and on the subclasses of all those, including non-existent packages that have corresponding entries in C. It also sets the effective names (C) on all the stashes as appropriate. If the C is present and is not in the symbol table, then this function simply returns. This checked will be skipped if C. =over 3 void mro_package_moved(HV * const stash, HV * const oldstash, const GV * const gv, U32 flags) =back =back =for hackers Found in file mro_core.c =head1 Multicall Functions There are currently no internal API items in Multicall Functions =head1 Numeric Functions =over 4 =item C X Checks whether the argument would be either an infinity or C when used as a number, but is careful not to trigger non-numeric or uninitialized warnings. it assumes the caller has done C already. Note that this always accepts trailing garbage (similar to C with C), so C<"inferior"> and C<"NAND gates"> will return true. =over 3 bool isinfnansv(SV *sv) =back =back =for hackers Found in file numeric.c =head1 Optrees =over 4 =item C X Construct a Perl subroutine, also performing some surrounding jobs. This function is expected to be called in a Perl compilation context, and some aspects of the subroutine are taken from global variables associated with compilation. In particular, C represents the subroutine that is currently being compiled. It must be non-null when this function is called, and some aspects of the subroutine being constructed are taken from it. The constructed subroutine may actually be a reuse of the C object, but will not necessarily be so. If C is null then the subroutine will have no body, and for the time being it will be an error to call it. This represents a forward subroutine declaration such as S>. If C is non-null then it provides the Perl code of the subroutine body, which will be executed when the subroutine is called. This body includes any argument unwrapping code resulting from a subroutine signature or similar. The pad use of the code must correspond to the pad attached to C. The code is not expected to include a C or C op; this function will add such an op. C is consumed by this function and will become part of the constructed subroutine. C specifies the subroutine's prototype, unless one is supplied as an attribute (see below). If C is null, then the subroutine will not have a prototype. If C is non-null, it must point to a C op whose value is a string, and the subroutine will have that string as its prototype. If a prototype is supplied as an attribute, the attribute takes precedence over C, but in that case C should preferably be null. In any case, C is consumed by this function. C supplies attributes to be applied the subroutine. A handful of attributes take effect by built-in means, being applied to C immediately when seen. Other attributes are collected up and attached to the subroutine by this route. C may be null to supply no attributes, or point to a C op for a single attribute, or point to a C op whose children apart from the C are C ops for one or more attributes. Each C op must be a string, giving the attribute name optionally followed by parenthesised arguments, in the manner in which attributes appear in Perl source. The attributes will be applied to the sub by this function. C is consumed by this function. If C is false and C is null, then the subroutine will be anonymous. If C is false and C is non-null, then C must point to a C OP, which will be consumed by this function, and its string value supplies a name for the subroutine. The name may be qualified or unqualified, and if it is unqualified then a default stash will be selected in some manner. If C is true, then C doesn't point to an C at all, but is instead a cast pointer to a C by which the subroutine will be named. If there is already a subroutine of the specified name, then the new sub will either replace the existing one in the glob or be merged with the existing one. A warning may be generated about redefinition. If the subroutine has one of a few special names, such as C or C, then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. In the case of C, the subroutine will be executed and the reference to it disposed of before this function returns. The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. But a C subroutine, having already been executed, will quite likely have been destroyed already by the time this function returns, making it erroneous for the caller to make any use of the returned pointer. It is the caller's responsibility to ensure that it knows which of these situations applies. =over 3 CV * newATTRSUB_x(I32 floor, OP *o, OP *proto, OP *attrs, OP *block, bool o_is_gv) =back =back =for hackers Found in file op.c =over 4 =item C X Construct a Perl lexical subroutine, also performing some surrounding jobs, and returning a pointer to the constructed subroutine. Similar in action to L>. =over 3 CV * newMYSUB(I32 floor, OP *o, OP *proto, OP *attrs, OP *block) =back =back =for hackers Found in file op.c =over 4 =item C X Construct an XS subroutine, also performing some surrounding jobs. The subroutine will have the entry point C. It will have the prototype specified by the nul-terminated string C, or no prototype if C is null. The prototype string is copied; the caller can mutate the supplied string afterwards. If C is non-null, it must be a nul-terminated filename, and the subroutine will have its C set accordingly. By default C is set to point directly to the supplied string, which must be static. If C has the C bit set, then a copy of the string will be taken instead. Other aspects of the subroutine will be left in their default state. If anything else needs to be done to the subroutine for it to function correctly, it is the caller's responsibility to do that after this function has constructed it. However, beware of the subroutine potentially being destroyed before this function returns, as described below. If C is null then the subroutine will be anonymous, with its C referring to an C<__ANON__> glob. If C is non-null then the subroutine will be named accordingly, referenced by the appropriate glob. C is a string of length C bytes giving a sigilless symbol name, in UTF-8 if C has the C bit set and in Latin-1 otherwise. The name may be either qualified or unqualified, with the stash defaulting in the same manner as for C. C may contain flag bits understood by C with the same meaning as they have there, such as C. The symbol is always added to the stash if necessary, with C semantics. If there is already a subroutine of the specified name, then the new sub will replace the existing one in the glob. A warning may be generated about the redefinition. If the old subroutine was C then the decision about whether to warn is influenced by an expectation about whether the new subroutine will become a constant of similar value. That expectation is determined by C. (Note that the call to this function doesn't make the new subroutine C in any case; that is left to the caller.) If C is null then it indicates that the new subroutine will not become a constant. If C is non-null then it indicates that the new subroutine will become a constant, and it points to an C that provides the constant value that the subroutine will have. If the subroutine has one of a few special names, such as C or C, then it will be claimed by the appropriate queue for automatic running of phase-related subroutines. In this case the relevant glob will be left not containing any subroutine, even if it did contain one before. In the case of C, the subroutine will be executed and the reference to it disposed of before this function returns, and also before its prototype is set. If a C subroutine would not be sufficiently constructed by this function to be ready for execution then the caller must prevent this happening by giving the subroutine a different name. The function returns a pointer to the constructed subroutine. If the sub is anonymous then ownership of one counted reference to the subroutine is transferred to the caller. If the sub is named then the caller does not get ownership of a reference. In most such cases, where the sub has a non-phase name, the sub will be alive at the point it is returned by virtue of being contained in the glob that names it. A phase-named subroutine will usually be alive by virtue of the reference owned by the phase's automatic run queue. But a C subroutine, having already been executed, will quite likely have been destroyed already by the time this function returns, making it erroneous for the caller to make any use of the returned pointer. It is the caller's responsibility to ensure that it knows which of these situations applies. =over 3 CV * newXS_len_flags(const char *name, STRLEN len, XSUBADDR_t subaddr, const char * const filename, const char * const proto, SV ** const_svp, U32 flags) =back =back =for hackers Found in file op.c =over 4 =item C X Implements the C macro which you should use instead. =over 3 void op_refcnt_lock() =back =back =for hackers Found in file op.c =over 4 =item C X Implements the C macro which you should use instead. =over 3 void op_refcnt_unlock() =back =back =for hackers Found in file op.c =over 4 =item C X Return the next op in a depth-first traversal of the op tree, returning NULL when the traversal is complete. The initial call must supply the root of the tree as both top and o. For now it's static, but it may be exposed to the API in the future. =over 3 OP * traverse_op_tree(OP *top, OP *o) =back =back =for hackers Found in file peep.c =head1 Pack and Unpack There are currently no internal API items in Pack and Unpack =head1 Pad Data Structures =over 4 =item C X Save the current pad in the given context block structure. =over 3 void CX_CURPAD_SAVE(struct context) =back =back =for hackers Found in file pad.h =over 4 =item C X Access the SV at offset C in the saved current pad in the given context block structure (can be used as an lvalue). =over 3 SV * CX_CURPAD_SV(struct context, PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Get the value from slot C in the base (DEPTH=1) pad of a padlist =over 3 SV * PAD_BASE_SV(PADLIST padlist, PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Clone the state variables associated with running and compiling pads. =over 3 void PAD_CLONE_VARS(PerlInterpreter *proto_perl, CLONE_PARAMS* param) =back =back =for hackers Found in file pad.h =over 4 =item C X Return the flags for the current compiling pad name at offset C. Assumes a valid slot entry. =over 3 U32 PAD_COMPNAME_FLAGS(PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X The generation number of the name at offset C in the current compiling pad (lvalue). =over 3 STRLEN PAD_COMPNAME_GEN(PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Sets the generation number of the name at offset C in the current ling pad (lvalue) to C. =over 3 STRLEN PAD_COMPNAME_GEN_set(PADOFFSET po, int gen) =back =back =for hackers Found in file pad.h =over 4 =item C X Return the stash associated with an C variable. Assumes the slot entry is a valid C lexical. =over 3 HV * PAD_COMPNAME_OURSTASH(PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Return the name of the current compiling pad name at offset C. Assumes a valid slot entry. =over 3 char * PAD_COMPNAME_PV(PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Return the type (stash) of the current compiling pad name at offset C. Must be a valid name. Returns null if not typed. =over 3 HV * PAD_COMPNAME_TYPE(PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Whether this is a "field" variable. PADNAMEs where this is true will have additional information available via C. =over 3 bool PadnameIsFIELD(PADNAME * pn) =back =back =for hackers Found in file pad.h =over 4 =item C X Whether this is an "our" variable. =over 3 bool PadnameIsOUR(PADNAME * pn) =back =back =for hackers Found in file pad.h =over 4 =item C X Whether this is a "state" variable. =over 3 bool PadnameIsSTATE(PADNAME * pn) =back =back =for hackers Found in file pad.h =over 4 =item C X The stash in which this "our" variable was declared. =over 3 HV * PadnameOURSTASH(PADNAME * pn) =back =back =for hackers Found in file pad.h =over 4 =item C X Whether this entry belongs to an outer pad. Entries for which this is true are often referred to as 'fake'. =over 3 bool PadnameOUTER(PADNAME * pn) =back =back =for hackers Found in file pad.h =over 4 =item C X The stash associated with a typed lexical. This returns the C<%Foo::> hash for C. =over 3 HV * PadnameTYPE(PADNAME * pn) =back =back =for hackers Found in file pad.h =over 4 =item C X Restore the old pad saved into the local variable C by C =over 3 void PAD_RESTORE_LOCAL(PAD *opad) =back =back =for hackers Found in file pad.h =over 4 =item C X Save the current pad to the local variable C, then make the current pad equal to C =over 3 void PAD_SAVE_LOCAL(PAD *opad, PAD *npad) =back =back =for hackers Found in file pad.h =over 4 =item C X Save the current pad then set it to null. =over 3 void PAD_SAVE_SETNULLPAD() =back =back =for hackers Found in file pad.h =over 4 =item C X Set the current pad to be pad C in the padlist, saving the previous current pad. NB currently this macro expands to a string too long for some compilers, so it's best to replace it with SAVECOMPPAD(); PAD_SET_CUR_NOSAVE(padlist,n); =over 3 void PAD_SET_CUR(PADLIST padlist, I32 n) =back =back =for hackers Found in file pad.h =over 4 =item C X like PAD_SET_CUR, but without the save =over 3 void PAD_SET_CUR_NOSAVE(PADLIST padlist, I32 n) =back =back =for hackers Found in file pad.h =over 4 =item C X Set the slot at offset C in the current pad to C =over 3 SV * PAD_SETSV(PADOFFSET po, SV* sv) =back =back =for hackers Found in file pad.h =over 4 =item C X Get the value at offset C in the current pad =over 3 SV * PAD_SV(PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Lightweight and lvalue version of C. Get or set the value at offset C in the current pad. Unlike C, does not print diagnostics with -DX. For internal use only. =over 3 SV * PAD_SVl(PADOFFSET po) =back =back =for hackers Found in file pad.h =over 4 =item C X Clear the pointed to pad value on scope exit. (i.e. the runtime action of C) =over 3 void SAVECLEARSV(SV **svp) =back =back =for hackers Found in file pad.h =over 4 =item C X save C and C =over 3 void SAVECOMPPAD() =back =back =for hackers Found in file pad.h =over 4 =item C X Save a pad slot (used to restore after an iteration) =over 3 void SAVEPADSV(PADOFFSET po) =back =back =for hackers Found in file pad.h =head1 Password and Group access There are currently no internal API items in Password and Group access =head1 Paths to system commands There are currently no internal API items in Paths to system commands =head1 Prototype information There are currently no internal API items in Prototype information =head1 Reference-counted stack manipulation There are currently no internal API items in Reference-counted stack manipulation =head1 REGEXP Functions X =over 4 =item C Described in L. =back =for hackers Found in file pod/perlreguts.pod =head1 Reports and Formats There are currently no internal API items in Reports and Formats =head1 Signals There are currently no internal API items in Signals =head1 Site configuration There are currently no internal API items in Site configuration =head1 Sockets configuration values There are currently no internal API items in Sockets configuration values =head1 Source Filters There are currently no internal API items in Source Filters =head1 Stack Manipulation Macros =over 4 =item C X Declare Just C. This is actually identical to C, and declares a local copy of perl's stack pointer, available via the C macro. See C>. (Available for backward source code compatibility with the old (Perl 5.005) thread model.) =over 3 djSP(); =back =back =for hackers Found in file pp.h =over 4 =item C X True if this op will be the return value of an lvalue subroutine =back =for hackers Found in file pp.h =over 4 =item C X Implements L> and kin, which should be used instead of this function. =over 3 SSize_t save_alloc(SSize_t size, I32 pad) =back =back =for hackers Found in file scope.c =head1 String Handling =over 4 =item C X Copy a source buffer to a destination buffer, stopping at (but not including) the first occurrence in the source of the delimiter byte, C. The source is the bytes between S and C - 1>. Similarly, the dest is C up to C. The number of bytes copied is written to C<*retlen>. Returns the position of C in the C buffer, but if there is no such occurrence before C, then C is returned, and the entire buffer S .. C - 1> is copied. If there is room in the destination available after the copy, an extra terminating safety C byte is appended (not included in the returned length). The error case is if the destination buffer is not large enough to accommodate everything that should be copied. In this situation, a value larger than S - C> is written to C<*retlen>, and as much of the source as fits will be written to the destination. Not having room for the safety C is not considered an error. =over 3 char * delimcpy_no_escape(char *to, const char *to_end, const char *from, const char *from_end, const int delim, I32 *retlen) =back =back =for hackers Found in file util.c =over 4 =item C X Implements the L> macro, which you should use instead. The first time a module is loaded, the global C is incremented, and that value is assigned to that module's static C (whose address is passed as an arg). Then, for each interpreter this function is called for, it makes sure a C slot is available to hang the static data off, by allocating or extending the interpreter's C array NOTE: C must be explicitly called as C with an C parameter. =over 3 void * Perl_my_cxt_init(pTHX_ int *indexp, size_t size) =back =back =for hackers Found in file util.c =over 4 =item C X C returns true if the C string seems to contain at least one non-Q-prefixed C<%[efgaEFGA]> format specifier, or returns false otherwise. The format specifier detection is not complete printf-syntax detection, but it should catch most common cases. If true is returned, those arguments B in theory be processed with C, but in case there is more than one such format specifier (see L), and if there is anything else beyond that one (even just a single byte), they B be processed because C is very strict, accepting only one format spec, and nothing else. In this case, the code should probably fail. =over 3 bool quadmath_format_needed(const char *format) =back =back =for hackers Found in file util.c =over 4 =item C X C is very strict about its C string and will fail, returning -1, if the format is invalid. It accepts exactly one format spec. C checks that the intended single spec looks sane: begins with C<%>, has only one C<%>, ends with C<[efgaEFGA]>, and has C before it. This is not a full "printf syntax check", just the basics. Returns true if it is valid, false if not. See also L. =over 3 bool quadmath_format_valid(const char *format) =back =back =for hackers Found in file util.c =head1 SV Flags =over 4 =item C X Type flag for scalars. See L. =back =for hackers Found in file sv.h =head1 SV Handling =over 4 =item C X A scratch pad SV for whatever temporary use you need. Chiefly used as a fallback by macros on platforms where L> is unavailable, and which would otherwise evaluate their SV parameter more than once. B, if this is used in a situation where something that is using it is in a call stack with something else that is using it, this variable would get zapped, leading to hard-to-diagnose errors. =over 3 PL_Sv =back =back =for hackers Found in file intrpvar.h =over 4 =item C X Given a chunk of memory, link it to the head of the list of arenas, and split it into a list of free SVs. =over 3 void sv_add_arena(char * const ptr, const U32 size, const U32 flags) =back =back =for hackers Found in file sv.c =over 4 =item C X This macro is only used by C or its macro equivalent, and only if the latter's argument is neither C, C nor C. It calls C with the C flag. =over 3 bool sv_2bool(SV * const sv) =back =back =for hackers Found in file sv.c =over 4 =item C X This function is only used by C and friends, and only if the latter's argument is neither C, C nor C. If the flags contain C, then it does an C first. =over 3 bool sv_2bool_flags(SV *sv, I32 flags) =back =back =for hackers Found in file sv.c =over 4 =item C X Decrement the refcnt of each remaining SV, possibly triggering a cleanup. This function may have to be called multiple times to free SVs which are in complex self-referential hierarchies. =over 3 SSize_t sv_clean_all() =back =back =for hackers Found in file sv.c =over 4 =item C X Attempt to destroy all objects not yet freed. =over 3 void sv_clean_objs() =back =back =for hackers Found in file sv.c =over 4 =item C X Deallocate the memory used by all arenas. Note that all the individual SV heads and bodies within the arenas must already have been freed. =over 3 void sv_free_arenas() =back =back =for hackers Found in file sv.c =over 4 =item C X Expands the character buffer in the SV. If necessary, uses C and upgrades the SV to C. Returns a pointer to the character buffer. Use the C wrapper instead. =over 3 char * sv_grow(SV * const sv, STRLEN newlen) =back =back =for hackers Found in file sv.c =over 4 =item C X A cut-down version of sv_grow intended only for when sv is a freshly-minted SVt_PV, SVt_PVIV, SVt_PVNV, or SVt_PVMG. i.e. sv has the default flags, has never been any other type, and does not have an existing string. Basically, just assigns a char buffer and returns a pointer to it. =over 3 char * sv_grow_fresh(SV * const sv, STRLEN newlen) =back =back =for hackers Found in file sv.c =over 4 =item C X Increment an SV's reference count. Use the C wrapper instead. =over 3 SV * sv_newref(SV * const sv) =back =back =for hackers Found in file sv.c =over 4 =item C X NOTE: C is B and may change or be removed without notice. Return an SV with the numeric value of the source SV, doing any necessary reference or overload conversion. The caller is expected to have handled get-magic already. =over 3 SV * sv_2num(SV * const sv) =back =back =for hackers Found in file sv.c =over 4 =item C X Use the C macro instead =over 3 char * sv_pv(SV *sv) =back =back =for hackers Found in file mathoms.c =over 4 =item C X Use C instead. =over 3 char * sv_pvbyte(SV *sv) =back =back =for hackers Found in file mathoms.c =over 4 =item C X The backend for the C macro. Always use the macro instead. If the SV cannot be downgraded from UTF-8, this croaks. =over 3 char * sv_pvbyten_force(SV * const sv, STRLEN * const lp) =back =back =for hackers Found in file sv.c =over 4 =item C X Return a pointer to the byte-encoded representation of the SV. May cause the SV to be downgraded from UTF-8 as a side-effect. Usually accessed via the C macro. =over 3 char * sv_2pvbyte_nolen(SV *sv) =back =back =for hackers Found in file mathoms.c =over 4 =item C X Get a sensible string out of the SV somehow. A private implementation of the C macro for compilers which can't cope with complex macro expressions. Always use the macro instead. =over 3 char * sv_pvn_force(SV *sv, STRLEN *lp) =back =back =for hackers Found in file sv.c =over 4 =item C X Like C, but doesn't return the length too. You should usually use the macro wrapper C instead. =over 3 char * sv_2pv_nolen(SV *sv) =back =back =for hackers Found in file mathoms.c =over 4 =item C X The backend for the C macro. Always use the macro instead. =over 3 char * sv_pvutf8n_force(SV * const sv, STRLEN * const lp) =back =back =for hackers Found in file sv.c =over 4 =item C X Return a pointer to the UTF-8-encoded representation of the SV. May cause the SV to be upgraded to UTF-8 as a side-effect. Usually accessed via the C macro. =over 3 char * sv_2pvutf8_nolen(SV *sv) =back =back =for hackers Found in file mathoms.c =over 4 =item C X Use the C macro instead =over 3 char * sv_pvutf8(SV *sv) =back =back =for hackers Found in file mathoms.c =over 4 =item C X Test an SV for taintedness. Use C instead. =over 3 bool sv_tainted(SV * const sv) =back =back =for hackers Found in file sv.c =over 4 =item C X A quick flag check to see whether an C should be passed to C to be "downgraded" before C or C can be modified directly. For example, if your scalar is a reference and you want to modify the C slot, you can't just do C, as that will leak the referent. This is used internally by various sv-modifying functions, such as C, C and C. One case that this does not handle is a gv without SvFAKE set. After if (SvTHINKFIRST(gv)) sv_force_normal(gv); it will still be a gv. C sometimes produces false positives. In those cases C does nothing. =over 3 U32 SvTHINKFIRST(SV *sv) =back =back =for hackers Found in file sv.h =over 4 =item C X Returns true if the SV has a true value by Perl's rules. Use the C macro instead, which may call C or may instead use an in-line version. =over 3 I32 sv_true(SV * const sv) =back =back =for hackers Found in file sv.c =over 4 =item C X Untaint an SV. Use C instead. =over 3 void sv_untaint(SV * const sv) =back =back =for hackers Found in file sv.c =head1 Tainting =over 4 =item C X Taint an SV. Use C instead. =over 3 void sv_taint(SV *sv) =back =back =for hackers Found in file mathoms.c =over 4 =item C X If we aren't in taint checking mode, do nothing; otherwise indicate to L> and L> that some unspecified element is tainted. =over 3 void TAINT() =back =back =for hackers Found in file perl.h =over 4 =item C X Looks at several components of L|perlvar/%ENV> for taintedness, and calls L> if any are tainted. The components it searches are things like C<$PATH>. =over 3 void TAINT_ENV =back =back =for hackers Found in file perl.h =over 4 =item C X Implements the L macro, which you should generally use instead. =over 3 void taint_env() =back =back =for hackers Found in file taint.c =over 4 =item C X Returns a boolean as to whether some element is tainted or not. =over 3 bool TAINT_get() =back =back =for hackers Found in file perl.h =over 4 =item C X If C evaluates to true, call L> to indicate that something is tainted; otherwise do nothing. =over 3 void TAINT_IF(bool c) =back =back =for hackers Found in file perl.h =over 4 =item C X Returns a boolean as to whether taint checking is enabled or not. =over 3 bool TAINTING_get() =back =back =for hackers Found in file perl.h =over 4 =item C X Turn taint checking mode off/on =over 3 void TAINTING_set(bool s) =back =back =for hackers Found in file perl.h =over 4 =item C X Remove any taintedness previously set by, I, C. =over 3 void TAINT_NOT() =back =back =for hackers Found in file perl.h =over 4 =item C X If no element is tainted, do nothing; otherwise output a message (containing C) that indicates there is a tainting violation. If such violations are fatal, it croaks. =over 3 void TAINT_PROPER(const char * s) =back =back =for hackers Found in file perl.h =over 4 =item C X Implements the L macro, which you should generally use instead. =over 3 void taint_proper(const char *f, const char * const s) =back =back =for hackers Found in file taint.c =over 4 =item C X If C is true, L> returns true; If C is false, L> returns false; =over 3 void TAINT_set(bool s) =back =back =for hackers Found in file perl.h =over 4 =item C X Returns false if tainting violations are fatal; Returns true if they're just warnings =over 3 bool TAINT_WARN_get() =back =back =for hackers Found in file perl.h =over 4 =item C X C being true indicates L> should return that tainting violations are just warnings C being false indicates L> should return that tainting violations are fatal. =over 3 void TAINT_WARN_set(bool s) =back =back =for hackers Found in file perl.h =head1 Time There are currently no internal API items in Time =head1 Typedef names There are currently no internal API items in Typedef names =head1 Unicode Support XXXXXX =over 4 =item C X NOTE: C is B and may change or be removed without notice. Like C()>, but takes an extra parameter, a pointer to where to store the location of the first character in C<"s"> that cannot be converted to non-UTF8. If that parameter is C, this function behaves identically to C. Otherwise if C<*is_utf8p> is 0 on input, the function behaves identically to C, except it also sets C<*first_non_downgradable> to C. Otherwise, the function returns a newly created C-terminated string containing the non-UTF8 equivalent of the convertible first portion of C<"s">. C<*lenp> is set to its length, not including the terminating C. If the entire input string was converted, C<*is_utf8p> is set to a FALSE value, and C<*first_non_downgradable> is set to C. Otherwise, C<*first_non_downgradable> is set to point to the first byte of the first character in the original string that wasn't converted. C<*is_utf8p> is unchanged. Note that the new string may have length 0. Another way to look at it is, if C<*first_non_downgradable> is non-C and C<*is_utf8p> is TRUE, this function starts at the beginning of C<"s"> and converts as many characters in it as possible stopping at the first one it finds that can't be converted to non-UTF-8. C<*first_non_downgradable> is set to point to that. The function returns the portion that could be converted in a newly created C-terminated string, and C<*lenp> is set to its length, not including the terminating C. If the very first character in the original could not be converted, C<*lenp> will be 0, and the new string will contain just a single C. If the entire input string was converted, C<*is_utf8p> is set to FALSE and C<*first_non_downgradable> is set to C. Upon successful return, the number of variants in the converted portion of the string can be computed by having saved the value of C<*lenp> before the call, and subtracting the after-call value of C<*lenp> from it. =over 3 U8 * bytes_from_utf8_loc(const U8 *s, STRLEN *lenp, bool *is_utf8p, const U8 **first_unconverted) =back =back =for hackers Found in file utf8.c =over 4 =item C X NOTE: C is B and may change or be removed without notice. Find the name of the undefined variable (if any) that caused the operator to issue a "Use of uninitialized value" warning. If match is true, only return a name if its value matches C. So roughly speaking, if a unary operator (such as C) generates a warning, then following the direct child of the op may yield an C or C that gives the name of the undefined variable. On the other hand, with C there are two branches to follow, so we only print the variable name if we get an exact match. C points to a string pointer holding the description of the op. This may be updated if needed. The name is returned as a mortal SV. Assumes that C is the OP that originally triggered the error, and that C/C points to the currently executing pad. =over 3 SV * find_uninit_var(const OP * const obase, const SV * const uninit_sv, bool match, const char **desc_p) =back =back =for hackers Found in file sv.c =over 4 =item C X Returns a bool as to whether or not the sequence of bytes from C up to but not including C form a "script run". C is TRUE iff the sequence starting at C is to be treated as UTF-8. To be precise, except for two degenerate cases given below, this function returns TRUE iff all code points in it come from any combination of three "scripts" given by the Unicode "Script Extensions" property: Common, Inherited, and possibly one other. Additionally all decimal digits must come from the same consecutive sequence of 10. For example, if all the characters in the sequence are Greek, or Common, or Inherited, this function will return TRUE, provided any decimal digits in it are from the same block of digits in Common. (These are the ASCII digits "0".."9" and additionally a block for full width forms of these, and several others used in mathematical notation.) For scripts (unlike Greek) that have their own digits defined this will accept either digits from that set or from one of the Common digit sets, but not a combination of the two. Some scripts, such as Arabic, have more than one set of digits. All digits must come from the same set for this function to return TRUE. C<*ret_script>, if C is not NULL, will on return of TRUE contain the script found, using the C typedef. Its value will be C if the function returns FALSE. If the sequence is empty, TRUE is returned, but C<*ret_script> (if asked for) will be C. If the sequence contains a single code point which is unassigned to a character in the version of Unicode being used, the function will return TRUE, and the script will be C. Any other combination of unassigned code points in the input sequence will result in the function treating the input as not being a script run. The returned script will be C iff all the code points in it are from the Inherited script. Otherwise, the returned script will be C iff all the code points in it are from the Inherited or Common scripts. =over 3 bool isSCRIPT_RUN(const U8 *s, const U8 *send, const bool utf8_target) =back =back =for hackers Found in file regexec.c =over 4 =item C X Returns TRUE if L returns FALSE for the first C bytes of the string C, but they are, nonetheless, legal Perl-extended UTF-8; otherwise returns FALSE. A TRUE return means that at least one code point represented by the sequence either is a wide character not representable as a single byte, or the representation differs depending on whether the sequence is encoded in UTF-8 or not. See also C>, C> =over 3 bool is_utf8_non_invariant_string(const U8 * const s, STRLEN len) =back =back =for hackers Found in file inline.h =over 4 =item C X C> It is planned to remove C from a future release of Perl. Do not use it for new code; remove it from existing code. Instead use L, or rarely, L. This function was useful for code that wanted to handle both EBCDIC and ASCII platforms with Unicode properties, but starting in Perl v5.20, the distinctions between the platforms have mostly been made invisible to most code, so this function is quite unlikely to be what you want. If you do need this precise functionality, use instead C> or C>. =over 3 UV utf8n_to_uvuni(const U8 *s, STRLEN curlen, STRLEN *retlen, U32 flags) =back =back =for hackers Found in file mathoms.c =over 4 =item C X C> It is planned to remove C from a future release of Perl. Do not use it for new code; remove it from existing code. Returns the Unicode code point of the first character in the string C which is assumed to be in UTF-8 encoding; C will be set to the length, in bytes, of that character. Some, but not all, UTF-8 malformations are detected, and in fact, some malformed input could cause reading beyond the end of the input buffer, which is one reason why this function is deprecated. The other is that only in extremely limited circumstances should the Unicode versus native code point be of any interest to you. If C points to one of the detected malformations, and UTF8 warnings are enabled, zero is returned and C<*retlen> is set (if C doesn't point to NULL) to -1. If those warnings are off, the computed value if well-defined (or the Unicode REPLACEMENT CHARACTER, if not) is silently returned, and C<*retlen> is set (if C isn't NULL) so that (S + C<*retlen>>) is the next possible position in C that could begin a non-malformed character. See L for details on when the REPLACEMENT CHARACTER is returned. =over 3 UV utf8_to_uvuni(const U8 *s, STRLEN *retlen) =back =back =for hackers Found in file mathoms.c =over 4 =item C X THIS FUNCTION SHOULD BE USED IN ONLY VERY SPECIALIZED CIRCUMSTANCES. Instead, B or L>. This function is like them, but the input is a strict Unicode (as opposed to native) code point. Only in very rare circumstances should code not be using the native code point. For details, see the description for L. =over 3 U8 * uvoffuni_to_utf8_flags(U8 *d, UV uv, UV flags) =back =back =for hackers Found in file utf8.c =over 4 =item C X Like C>, but should only be called when it is known that the next character in the input UTF-8 string C is well-formed (I, it passes C>. Surrogates, non-character code points, and non-Unicode code points are allowed. =over 3 UV valid_utf8_to_uvchr(const U8 *s, STRLEN *retlen) =back =back =for hackers Found in file inline.h =over 4 =item C X This function looks at the sequence of bytes between C and C, which are assumed to be encoded in ASCII/Latin1, and returns how many of them would change should the string be translated into UTF-8. Due to the nature of UTF-8, each of these would occupy two bytes instead of the single one in the input string. Thus, this function returns the precise number of bytes the string would expand by when translated to UTF-8. Unlike most of the other functions that have C in their name, the input to this function is NOT a UTF-8-encoded string. The function name is slightly I to emphasize this. This function is internal to Perl because khw thinks that any XS code that would want this is probably operating too close to the internals. Presenting a valid use case could change that. See also C> and C>, =over 3 Size_t variant_under_utf8_count(const U8 * const s, const U8 * const e) =back =back =for hackers Found in file inline.h =head1 Utility Functions =over 4 =item C X Implementing function on some systems for PerlProc_popen_list() =over 3 PerlIO * my_popen_list(const char *mode, int n, SV **args) =back =back =for hackers Found in file util.c =over 4 =item C X Emulates L on systems that don't have it, but which do have enough functionality for the emulation. =over 3 int my_socketpair(int family, int type, int protocol, int fd[2]) =back =back =for hackers Found in file util.c =head1 Versioning There are currently no internal API items in Versioning =head1 Warning and Dieing =over 4 =item C X Wrapper around Perl_ck_warner_d() to produce a deprecated warning in the given category with an appropriate message. The C argument must be a C string. The string " is deprecated" will automatically be added to the end of the C. =over 3 deprecate(U32 category, "message") =back =back =for hackers Found in file handy.h =over 4 =item C X Wrapper around Perl_ck_warner_d() to produce a deprecated warning in the given category with an appropriate message that the construct referred to by the message will disappear in a specific release. The C and C arguments must be a C string. The C string is expected to be of the form "5.40", with no minor element in the version. The actual message output will be the result of the following expression C which is why C and C must be literal C strings. =over 3 deprecate_disappears_in(U32 category, "when", "message") =back =back =for hackers Found in file handy.h =over 4 =item C X Wrapper around Perl_ck_warner_d() to produce a deprecated warning in the given category with an appropriate message that the construct referred to by the message will become fatal in a specific release. The C and C arguments must be a C string. The C string is expected to be of the form "5.40", with no minor element in the version. The actual message output will be the result of the following expression C which is why C and C must be literal C strings. =over 3 deprecate_fatal_in(U32 category, "when", "message") =back =back =for hackers Found in file handy.h =over 4 =item C X The C variable that roughly corresponds to Perl's C<$^W> warning variable. However, C<$^W> is treated as a boolean, whereas C is a collection of flag bits. On threaded perls, each thread has an independent copy of this variable; each initialized at creation time with the current value of the creating thread's copy. =over 3 U8 PL_dowarn =back =back =for hackers Found in file intrpvar.h =over 4 =item C X Print appropriate "Use of uninitialized variable" warning. =over 3 void report_uninit(const SV *uninit_sv) =back =back =for hackers Found in file sv.c =head1 XS There are currently no internal API items in XS =head1 Undocumented elements This section lists the elements that are otherwise undocumented. If you use any of them, please consider creating and submitting documentation for it. Experimental and deprecated undocumented elements are listed separately at the end. XXX X<_add_range_to_invlist>XXX XXX XXXX XXXX XXXXX XXXXX XXX X<_byte_dump_string>XXXX XXXX XXXX XXXXXX XXXXX XXXXXX XXXXXX XXXXXX XXXXX XXXXX XXXXXX XXXXXX XXX XX XXX XXX XXXX XXX XXX XXXX XXXX XXXX XXXX XXXXX XXXX XXXX XXXXX XXXXXX XXXXX XXXXX XXXXXX XXXXX XXXXX XXXX XXXX XXXXX XXX XXX XXX X<_force_out_malformed_utf8_message>X XXX XX XXX XXX XXX XXX XXX XXXX XXXX XXXX XXXX XXXX XXXX XXX XXXX XXXXX X<_inverse_folds>XXX<_invlist_array_init> XXX<_invlist_contains_cp>X X<_invlist_dump>X<_invlistEQ>XX X<_invlist_intersection>X<_invlist_intersection_maybe_complement_2nd> X<_invlist_invert>XX XXX<_invlist_len>X XX<_invlist_search>X XX<_invlist_subtract>X X<_invlist_union>X<_invlist_union_maybe_complement_2nd>X XXXX X<_is_in_locale_category>XX X<_is_uni_FOO>X<_is_uni_perl_idcont>X<_is_uni_perl_idstart> XXX X<_is_utf8_FOO>XX<_is_utf8_perl_idcont> X<_is_utf8_perl_idstart>XXX XXXX XXXX XXX XXXX XXX XXX XXXX XXXX XXXX XXXX XXX XXXX XXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXX XXXXX XXX XXXX XXXX XXXXX XXXX XXXXX<_new_invlist> X<_new_invlist_C_array>XXX XXXX XXXX XXXX XXXX XXXX XXXXX XXXX XXX XXXX XXX XXX XXX XX XX XXX XX XXXX XXXXX XXXX XXXXX XXXX XXX XXX XXX XX XXX XXXX XXXX XXXX XXXXX XXXX XXXXX XXXXXX XXXX XXXXX XXXXX XXX XX XXX XX<_setup_canned_invlist>XX XXXX XXXX XXXXX XXXXX XXXX XXXXX XXX XXX XXXXX XXXX XXXXX X<_to_fold_latin1>XXX<_to_uni_fold_flags> XXXX<_to_upper_title_latin1> X<_to_utf8_fold_flags>X<_to_utf8_lower_flags>X<_to_utf8_title_flags> X<_to_utf8_upper_flags>XX XXXXX X<_utf8n_to_uvchr_msgs_helper>X XXX XXXX XXXX XXX XXX XXXXXX XX abort_execution add_above_Latin1_folds add_cp_to_invlist _add_range_to_invlist allocmy amagic_cmp amagic_cmp_desc amagic_cmp_locale amagic_cmp_locale_desc amagic_i_ncmp amagic_i_ncmp_desc amagic_is_enabled amagic_ncmp amagic_ncmp_desc any_dup append_utf8_from_native_byte apply atfork_lock atfork_unlock av_arylen_p av_extend_guts av_iter_p av_nonelem av_reify bind_match block_gimme boot_core_builtin boot_core_mro boot_core_PerlIO boot_core_UNIVERSAL build_infix_plugin _byte_dump_string call_list cando capture_clear cast_iv cast_i32 cast_ulong cast_uv check_hash_fields_and_hekify check_regnode_after check_utf8_print ck_anoncode ck_backtick ck_bitop ck_classname ck_cmp ck_concat ck_defined ck_delete ck_each ck_entersub_args_core ck_eof ck_eval ck_exec ck_exists ck_ftst ck_fun ck_glob ck_grep ck_helemexistsor ck_index ck_isa ck_join ck_length ck_lfun ck_listiob ck_match ck_method ck_null ck_open ck_prototype ck_readline ck_refassign ck_repeat ck_require ck_return ck_rfun ck_rvconst ck_sassign ck_select ck_shift ck_smartmatch ck_sort ck_spair ck_split ck_stringify ck_subr ck_substr ck_svconst ck_tell ck_trunc ck_trycatch ckwarn ckwarn_d class_add_ADJUST class_add_field class_apply_attributes class_apply_field_attributes class_prepare_initfield_parse class_prepare_method_parse class_seal_stash class_set_field_defop class_setup_stash class_wrap_method_body clear_defarray closest_cop cmpchain_extend cmpchain_finish cmpchain_start cmp_desc cmp_locale_desc cntrl_to_mnemonic construct_ahocorasick_from_trie cop_file_avn coresub_op croak_caller croak_kw_unless_class croak_memory_wrap croak_no_mem croak_no_mem_ext croak_popstack csighandler csighandler1 csighandler3 current_re_engine custom_op_get_field cv_clone_into cv_const_sv_or_av cvgv_from_hek cvgv_set cvstash_set cv_undef_flags cx_dump cx_dup cxinc deb_stack_all debstackptrs debug_hash_seed debug_peep debug_show_study_flags debug_studydata defelem_target despatch_signals die_unwind do_aexec do_aexec5 do_aspawn do_eof does_utf8_overflow do_exec do_exec3 dofile do_gv_dump do_gvgv_dump do_hv_dump doing_taint do_ipcctl do_ipcget do_magic_dump do_msgrcv do_msgsnd do_ncmp do_op_dump do_pmop_dump do_print do_readline doref do_seek do_semop do_shmio do_spawn do_spawn_nowait do_sv_dump do_sysseek do_tell do_trans do_uniprop_match do_vecget do_vecset do_vop drand48_init_r drand48_r dtrace_probe_call dtrace_probe_load dtrace_probe_op dtrace_probe_phase dump_all_perl dump_indent dump_packsubs_perl dump_sub_perl dump_sv_child dumpuntil dump_vindent dup_warnings find_first_differing_byte_pos find_lexical_cv find_runcv_where find_script finish_export_lexical foldEQ_latin1_s2_folded foldEQ_latin1 foldEQ_utf8_flags force_locale_unlock _force_out_malformed_utf8_message form_alien_digit_msg form_cp_too_large_msg free_tied_hv_pool free_tmps get_and_check_backslash_N_name get_ANYOFHbbm_contents get_ANYOFM_contents get_db_sub get_debug_opts get_deprecated_property_msg getenv_len get_extended_os_errno get_hash_seed get_invlist_iter_addr get_invlist_offset_addr get_invlist_previous_index_addr get_mstats get_prop_definition get_prop_values get_regclass_aux_data get_re_gclass_aux_data get_regex_charset_name get_win32_message_utf8ness gp_free gp_ref grok_bin_oct_hex grok_bslash_c grok_bslash_o grok_bslash_x gv_check gv_fetchmeth_internal gv_override gv_setref gv_stashpvn_internal he_dup hek_dup hfree_next_entry hv_auxalloc hv_common hv_common_key_len hv_delayfree_ent hv_free_ent hv_placeholders_p hv_pushkv hv_rand_set hv_undef_flags import_builtin_bundle infix_plugin_standard init_argv_symbols init_constants init_dbargs init_debugger init_i18nl10n init_named_cv init_stacks init_tm init_uniprops _inverse_folds invert invlist_array _invlist_array_init invlist_clear invlist_clone _invlist_contains_cp invlist_contents _invlist_dump _invlistEQ invlist_extend invlist_highest _invlist_intersection _invlist_intersection_maybe_complement_2nd _invlist_invert invlist_is_iterating invlist_iterfinish invlist_iterinit invlist_iternext _invlist_len invlist_max invlist_previous_index _invlist_search invlist_set_len invlist_set_previous_index _invlist_subtract invlist_trim _invlist_union _invlist_union_maybe_complement_2nd invmap_dump invoke_exception_hook io_close isFF_overlong is_grapheme _is_in_locale_category is_invlist is_standard_filehandle_name _is_uni_FOO _is_uni_perl_idcont _is_uni_perl_idstart is_utf8_char_helper_ is_utf8_common is_utf8_FF_helper_ _is_utf8_FOO is_utf8_overlong _is_utf8_perl_idcont _is_utf8_perl_idstart jmaybe join_exact keyword keyword_plugin_standard list load_charnames locale_panic localize lossless_NV_to_IV lsbit_pos32 lsbit_pos64 magic_clear_all_env magic_cleararylen_p magic_clearenv magic_clearhook magic_clearhookall magic_clearisa magic_clearpack magic_clearsig magic_copycallchecker magic_existspack magic_freearylen_p magic_freecollxfrm magic_freemglob magic_freeovrld magic_freeutf8 magic_get magic_getarylen magic_getdebugvar magic_getdefelem magic_getnkeys magic_getpack magic_getpos magic_getsig magic_getsubstr magic_gettaint magic_getuvar magic_getvec magic_killbackrefs magic_nextpack magic_regdata_cnt magic_regdatum_get magic_regdatum_set magic_scalarpack magic_set magic_set_all_env magic_setarylen magic_setcollxfrm magic_setdbline magic_setdebugvar magic_setdefelem magic_setenv magic_sethook magic_sethookall magic_setisa magic_setlvref magic_setmglob magic_setnkeys magic_setnonelem magic_setpack magic_setpos magic_setregexp magic_setsig magic_setsigall magic_setsubstr magic_settaint magic_setutf8 magic_setuvar magic_setvec magic_sizepack magic_wipepack make_trie malloced_size malloc_good_size markstack_grow mbtowc_ mem_collxfrm_ mem_log_alloc mem_log_del_sv mem_log_free mem_log_new_sv mem_log_realloc mg_find_mglob mg_size mode_from_discipline more_bodies more_sv moreswitches mortal_getenv mortalized_pv_copy mro_get_private_data mro_meta_dup mro_meta_init msbit_pos32 msbit_pos64 multiconcat_stringify multideref_stringify my_atof2 my_atof3 my_attrs my_clearenv my_lstat my_lstat_flags my_memrchr my_mkostemp_cloexec my_mkstemp_cloexec my_stat my_stat_flags my_strerror my_unexec newFORM _new_invlist _new_invlist_C_array newMETHOP_internal newPROG new_stackinfo new_stackinfo_flags newSTUB newSVavdefelem newXS_deffile nextargv no_bareword_allowed no_bareword_filehandle noperl_die notify_parser_that_changed_to_utf8 oopsAV oopsHV op_clear op_integerize op_lvalue_flags opmethod_stash op_prune_chain_head op_relocate_sv opslab_force_free opslab_free opslab_free_nopad op_std_init op_varname package package_version pad_add_weakref padlist_store padname_free PadnameIN_SCOPE padnamelist_free parser_dup parser_free parser_free_nexttoke_ops parse_unicode_opts path_is_searchable peep perl_alloc_using perl_clone_using PerlEnv_putenv PerlIO_context_layers PerlIO_restore_errno PerlIO_save_errno PerlLIO_dup_cloexec PerlLIO_dup2_cloexec PerlLIO_open_cloexec PerlLIO_open3_cloexec PerlProc_pipe_cloexec PerlSock_accept_cloexec PerlSock_socket_cloexec PerlSock_socketpair_cloexec perly_sighandler pmruntime POPMARK populate_anyof_bitmap_from_invlist populate_bitmap_from_invlist populate_invlist_from_bitmap populate_isa pregfree pregfree2 prepare_export_lexical ptr_hash qerror ReANY reentrant_free reentrant_init reentrant_retry reentrant_size re_exec_indentf ref reg_add_data regcurly regdump regdupe_internal regexec_flags regfree_internal reginitcolors reg_named_buff reg_named_buff_all reg_named_buff_exists reg_named_buff_fetch reg_named_buff_firstkey reg_named_buff_iter reg_named_buff_nextkey reg_named_buff_scalar regnext regnode_after reg_numbered_buff_fetch reg_numbered_buff_fetch_flags reg_numbered_buff_length reg_numbered_buff_store regprop reg_qr_package reg_skipcomment reg_temp_copy re_indentf re_intuit_start re_intuit_string re_op_compile report_evil_fh report_redefined_cv report_wrongway_fh re_printf rpeep rsignal_restore rsignal_save rvpv_dup rxres_save same_dirent save_bool save_clearsv save_delete save_destructor save_destructor_x save_freeop save_freepv save_freesv save_int save_iv save_I8 save_I16 save_I32 save_mortalizesv save_pptr save_pushi32ptr save_pushptrptr save_re_context save_sptr savestack_grow savestack_grow_cnt save_strlen sawparens scalar scalarvoid scan_commit scan_num seed set_ANYOF_arg set_caret_X setfd_cloexec setfd_cloexec_for_nonsysfd setfd_cloexec_or_inhexec_by_sysfdness setfd_inhexec setfd_inhexec_for_sysfd set_numeric_standard set_numeric_underlying set_padlist _setup_canned_invlist share_hek should_warn_nl should_we_output_Debug_r sighandler sighandler1 sighandler3 single_1bit_pos32 single_1bit_pos64 Slab_Alloc Slab_Free Slab_to_ro Slab_to_rw softref2xv sortsv_flags_impl ssc_init stack_grow str_to_version strxfrm study_chunk sub_crush_depth sv_add_backref sv_buf_to_ro sv_del_backref sv_i_ncmp sv_i_ncmp_desc sv_2iv sv_magicext_mglob sv_mark_arenas sv_ncmp sv_ncmp_desc sv_only_taint_gmagic sv_or_pv_pos_u2b sv_pvbyten_force_wrapper sv_pvutf8n_force_wrapper sv_resetpvn sv_sethek sv_sweep_arenas SvTRUE_common sv_unglob sv_2uv switch_locale_context sys_init sys_init3 sys_intern_clear sys_intern_dup sys_intern_init sys_term tied_method tmps_grow_p _to_fold_latin1 TOPMARK to_uni_fold _to_uni_fold_flags to_uni_lower to_uni_title to_uni_upper _to_upper_title_latin1 _to_utf8_fold_flags _to_utf8_lower_flags _to_utf8_title_flags _to_utf8_upper_flags translate_substr_offsets try_amagic_bin try_amagic_un uiv_2buf unlnk unshare_hek unwind_paren _utf8n_to_uvchr_msgs_helper utf16_to_utf8_base utf16_to_utf8_reversed utf16_to_utf8 utf8_to_uvchr_buf_helper utilize uvoffuni_to_utf8_flags_msgs variant_byte_number varname vivify_defelem vivify_ref wait4pid warn_elem_scalar_context warn_problematic_locale was_lvalue_sub watch win32_croak_not_implemented write_to_stderr xs_boot_epilog xs_handshake yyerror yyerror_pv yyerror_pvn yylex yyparse yyquit yyunlex Next are the experimental undocumented elements XXX XXXX XXXXX XXXX XXXX XXXXX XXXXX XXX XXX XXXX XXXX XXX XXXXX XXXX XXX alloc_LOGOP gimme_V av_remove_offset hv_backreferences_p clear_defarray_simple hv_kill_backrefs create_eval_scope invlist_highest_range_start cv_ckproto_len_flags invlist_lowest cx_popblock newGP cx_popeval new_warnings_bitfield cx_popformat op_refcnt_dec cx_popgiven op_refcnt_inc cx_poploop op_unscope cx_popsub pop_stackinfo cx_popsub_args pp_wrap cx_popsub_common push_stackinfo cx_popwhen rpp_free_2_ cx_pushblock rpp_obliterate_stack_to cx_pusheval rpp_replace_2_1_COMMON cx_pushformat runops_wrap cx_pushgiven scan_str cx_pushloop_for scan_word cx_pushloop_plain scan_word6 cx_pushsub skipspace_flags cx_pushtry sv_free2 cx_pushwhen sv_kill_backrefs cx_topblock sv_setpv_freshbuf delete_eval_scope sv_setsv_cow do_open_raw sv_strftime_ints do_open6 switch_argstack emulate_cop_io utf8_to_utf16_base get_re_arg xs_wrap get_vtbl Finally are the deprecated undocumented elements. Do not use any for new code; remove all occurrences of all of these from existing code. XXXX get_no_modify get_opargs get_ppaddr uvuni_to_utf8 =head1 AUTHORS The autodocumentation system was originally added to the Perl core by Benjamin Stuhl. Documentation is by whoever was kind enough to document their functions. =head1 SEE ALSO F, L, L, L, L, L, L, L, L, L, L, L, L, L, L =cut ex: set ro ft=pod:`