%d\n", h);
}

static void
mcpcia_pci_clr_err(int mid)
{
	*(vuip)MCPCIA_CAP_ERR(mid);
	*(vuip)MCPCIA_CAP_ERR(mid) = 0xffffffff;   /* Clear them all.  */
	mb();
	*(vuip)MCPCIA_CAP_ERR(mid);  /* Re-read for force write.  */
}

static void __init
mcpcia_startup_hose(struct pci_controller *hose)
{
	int mid = MCPCIA_HOSE2MID(hose->index);
	unsigned int tmp;

	mcpcia_pci_clr_err(mid);

	/* 
	 * Set up error reporting.
	 */
	tmp = *(vuip)MCPCIA_CAP_ERR(mid);
	tmp |= 0x0006;		/* master/target abort */
	*(vuip)MCPCIA_CAP_ERR(mid) = tmp;
	mb();
	tmp = *(vuip)MCPCIA_CAP_ERR(mid);

	/*
	 * Set up the PCI->physical memory translation windows.
	 *
	 * Window 0 is scatter-gather 8MB at 8MB (for isa)
	 * Window 1 is scatter-gather (up to) 1GB at 1GB (for pci)
	 * Window 2 is direct access 2GB at 2GB
	 */
	hose->sg_isa = iommu_arena_new(hose, 0x00800000, 0x00800000,
				       SMP_CACHE_BYTES);
	hose->sg_pci = iommu_arena_new(hose, 0x40000000,
				       size_for_memory(0x40000000),
				       SMP_CACHE_BYTES);

	__direct_map_base = 0x80000000;
	__direct_map_size = 0x80000000;

	*(vuip)MCPCIA_W0_BASE(mid) = hose->sg_isa->dma_base | 3;
	*(vuip)MCPCIA_W0_MASK(mid) = (hose->sg_isa->size - 1) & 0xfff00000;
	*(vuip)MCPCIA_T0_BASE(mid) = virt_to_phys(hose->sg_isa->ptes) >> 8;

	*(vuip)MCPCIA_W1_BASE(mid) = hose->sg_pci->dma_base | 3;
	*(vuip)MCPCIA_W1_MASK(mid) = (hose->sg_pci->size - 1) & 0xfff00000;
	*(vuip)MCPCIA_T1_BASE(mid) = virt_to_phys(hose->sg_pci->ptes) >> 8;

	*(vuip)MCPCIA_W2_BASE(mid) = __direct_map_base | 1;
	*(vuip)MCPCIA_W2_MASK(mid) = (__direct_map_size - 1) & 0xfff00000;
	*(vuip)MCPCIA_T2_BASE(mid) = 0;

	*(vuip)MCPCIA_W3_BASE(mid) = 0x0;

	mcpcia_pci_tbi(hose, 0, -1);

	*(vuip)MCPCIA_HBASE(mid) = 0x0;
	mb();

	*(vuip)MCPCIA_HAE_MEM(mid) = 0U;
	mb();
	*(vuip)MCPCIA_HAE_MEM(mid); /* read it back. */
	*(vuip)MCPCIA_HAE_IO(mid) = 0;
	mb();
	*(vuip)MCPCIA_HAE_IO(mid);  /* read it back. */
}

void __init
mcpcia_init_arch(void)
{
	/* With multiple PCI busses, we play with I/O as physical addrs.  */
	ioport_resource.end = ~0UL;

	/* Allocate hose 0.  That's the one that all the ISA junk hangs
	   off of, from which we'll be registering stuff here in a bit.
	   Other hose detection is done in mcpcia_init_hoses, which is
	   called from init_IRQ.  */

	mcpcia_new_hose(0);
}

/* This is called from init_IRQ, since we cannot take interrupts
   before then.  Which means we cannot do this in init_arch.  */

void __init
mcpcia_init_hoses(void)
{
	struct pci_controller *hose;
	int hose_count;
	int h;

	/* First, find how many hoses we have.  */
	hose_count = 0;
	for (h = 0; h < MCPCIA_MAX_HOSES; ++h) {
		if (mcpcia_probe_hose(h)) {
			if (h != 0)
				mcpcia_new_hose(h);
			hose_count++;
		}
	}

	printk("mcpcia_init_hoses: found %d hoses\n", hose_count);

	/* Now do init for each hose.  */
	for (hose = hose_head; hose; hose = hose->next)
		mcpcia_startup_hose(hose);
}

static void
mcpcia_print_uncorrectable(struct el_MCPCIA_uncorrected_frame_mcheck *logout)
{
	struct el_common_EV5_uncorrectable_mcheck *frame;
	int i;

	frame = &logout->procdata;

	/* Print PAL fields */
	for (i = 0; i < 24; i += 2) {
		printk("  paltmp[%d-%d] = %16lx %16lx\n",
		       i, i+1, frame->paltemp[i], frame->paltemp[i+1]);
	}
	for (i = 0; i < 8; i += 2) {
		printk("  shadow[%d-%d] = %16lx %16lx\n",
		       i, i+1, frame->shadow[i], 
		       frame->shadow[i+1]);
	}
	printk("  Addr of excepting instruction  = %16lx\n",
	       frame->exc_addr);
	printk("  Summary of arithmetic traps    = %16lx\n",
	       frame->exc_sum);
	printk("  Exception mask                 = %16lx\n",
	       frame->exc_mask);
	printk("  Base address for PALcode       = %16lx\n",
	       frame->pal_base);
	printk("  Interrupt Status Reg           = %16lx\n",
	       frame->isr);
	printk("  CURRENT SETUP OF EV5 IBOX      = %16lx\n",
	       frame->icsr);
	printk("  I-CACHE Reg %s parity error   = %16lx\n",
	       (frame->ic_perr_stat & 0x800L) ? 
	       "Data" : "Tag", 
	       frame->ic_perr_stat); 
	printk("  D-CACHE error Reg              = %16lx\n",
	       frame->dc_perr_stat);
	if (frame->dc_perr_stat & 0x2) {
		switch (frame->dc_perr_stat & 0x03c) {
		case 8:
			printk("    Data error in bank 1\n");
			break;
		case 4:
			printk("    Data error in bank 0\n");
			break;
		case 20:
			printk("    Tag error in bank 1\n");
			break;
		case 10:
			printk("    Tag error in bank 0\n");
			break;
		}
	}
	printk("  Effective VA                   = %16lx\n",
	       frame->va);
	printk("  Reason for D-stream            = %16lx\n",
	       frame->mm_stat);
	printk("  EV5 SCache address             = %16lx\n",
	       frame->sc_addr);
	printk("  EV5 SCache TAG/Data parity     = %16lx\n",
	       frame->sc_stat);
	printk("  EV5 BC_TAG_ADDR                = %16lx\n",
	       frame->bc_tag_addr);
	printk("  EV5 EI_ADDR: Phys addr of Xfer = %16lx\n",
	       frame->ei_addr);
	printk("  Fill Syndrome                  = %16lx\n",
	       frame->fill_syndrome);
	printk("  EI_STAT reg                    = %16lx\n",
	       frame->ei_stat);
	printk("  LD_LOCK                        = %16lx\n",
	       frame->ld_lock);
}

static void
mcpcia_print_system_area(unsigned long la_ptr)
{
	struct el_common *frame;
	struct pci_controller *hose;

	struct IOD_subpacket {
	  unsigned long base;
	  unsigned int whoami;
	  unsigned int rsvd1;
	  unsigned int pci_rev;
	  unsigned int cap_ctrl;
	  unsigned int hae_mem;
	  unsigned int hae_io;
	  unsigned int int_ctl;
	  unsigned int int_reg;
	  unsigned int int_mask0;
	  unsigned int int_mask1;
	  unsigned int mc_err0;
	  unsigned int mc_err1;
	  unsigned int cap_err;
	  unsigned int rsvd2;
	  unsigned int pci_err1;
	  unsigned int mdpa_stat;
	  unsigned int mdpa_syn;
	  unsigned int mdpb_stat;
	  unsigned int mdpb_syn;
	  unsigned int rsvd3;
	  unsigned int rsvd4;
	  unsigned int rsvd5;
	} *iodpp;

	frame = (struct el_common *)la_ptr;
	iodpp = (struct IOD_subpacket *) (la_ptr + frame->sys_offset);

	for (hose = hose_head; hose; hose = hose->next, iodpp++) {

	  printk("IOD %d Register Subpacket - Bridge Base Address %16lx\n",
		 hose->index, iodpp->base);
	  printk("  WHOAMI      = %8x\n", iodpp->whoami);
	  printk("  PCI_REV     = %8x\n", iodpp->pci_rev);
	  printk("  CAP_CTRL    = %8x\n", iodpp->cap_ctrl);
	  printk("  HAE_MEM     = %8x\n", iodpp->hae_mem);
	  printk("  HAE_IO      = %8x\n", iodpp->hae_io);
	  printk("  INT_CTL     = %8x\n", iodpp->int_ctl);
	  printk("  INT_REG     = %8x\n", iodpp->int_reg);
	  printk("  INT_MASK0   = %8x\n", iodpp->int_mask0);
	  printk("  INT_MASK1   = %8x\n", iodpp->int_mask1);
	  printk("  MC_ERR0     = %8x\n", iodpp->mc_err0);
	  printk("  MC_ERR1     = %8x\n", iodpp->mc_err1);
	  printk("  CAP_ERR     = %8x\n", iodpp->cap_err);
	  printk("  PCI_ERR1    = %8x\n", iodpp->pci_err1);
	  printk("  MDPA_STAT   = %8x\n", iodpp->mdpa_stat);
	  printk("  MDPA_SYN    = %8x\n", iodpp->mdpa_syn);
	  printk("  MDPB_STAT   = %8x\n", iodpp->mdpb_stat);
	  printk("  MDPB_SYN    = %8x\n", iodpp->mdpb_syn);
	}
}

void
mcpcia_machine_check(unsigned long vector, unsigned long la_ptr)
{
	struct el_MCPCIA_uncorrected_frame_mcheck *mchk_logout;
	unsigned int cpu = smp_processor_id();
	int expected;

	mchk_logout = (struct el_MCPCIA_uncorrected_frame_mcheck *)la_ptr;
	expected = mcheck_expected(cpu);

	mb();
	mb();  /* magic */
	draina();

	switch (expected) {
	case 0:
	    {
		/* FIXME: how do we figure out which hose the
		   error was on?  */	
		struct pci_controller *hose;
		for (hose = hose_head; hose; hose = hose->next)
			mcpcia_pci_clr_err(MCPCIA_HOSE2MID(hose->index));
		break;
	    }
	case 1:
		mcpcia_pci_clr_err(mcheck_extra(cpu));
		break;
	default:
		/* Otherwise, we're being called from mcpcia_probe_hose
		   and there's no hose clear an error from.  */
		break;
	}

	wrmces(0x7);
	mb();

	process_mcheck_info(vector, la_ptr, "MCPCIA", expected != 0);
	if (!expected && vector != 0x620 && vector != 0x630) {
		mcpcia_print_uncorrectable(mchk_logout);
		mcpcia_print_system_area(la_ptr);
	}
}