ions raised in review, below a more elaborate analysis of
the bug at hand:

Sdvo seems to have two timings, one is the output timing which will be
sent over whatever is connected on the other side of the sdvo chip (panel,
hdmi screen, tv), the other is the input timing which will be generated by
the gmch pipe. It looks like sdvo is expected to scale between the two.

To make things slightly more complicated, we have a bunch of special
cases:
- For lvds panel we always use a fixed output timing, namely
  intel_sdvo->sdvo_lvds_fixed_mode, hence that special case.
- Sdvo has an interface to generate a preferred input timing for a given
  output timing. This is the confusing thing that I've tried to clear up
  with the follow-on patches.
- A special requirement is that the input pixel clock needs to be between
  100MHz and 200MHz (likely to keep it within the electromechanical design
  range of PCIe), 270MHz on later gen4+. Lower pixel clocks are
  doubled/quadrupled.

The thing this patch tries to fix is that the pipe needs to be
explicitly instructed to double/quadruple the pixels and needs the
correspondingly higher pixel clock, whereas the sdvo adaptor seems to
do that itself and needs the unadjusted pixel clock. For the sdvo
encode side we already set the pixel mutliplier with a different
command (0x21).

This patch tries to fix this mess by:
- Keeping the output mode timing in the unadjusted plain mode, safe
  for the lvds case.
- Storing the input timing in the adjusted_mode with the adjusted
  pixel clock. This way we don't need to frob around with the core
  crtc mode set code.
- Fixing up the pixelclock when constructing the sdvo dtd timing
  struct. This is why the first hunk of the patch is an integral part
  of the series.
- Dropping the is_tv special case because input_dtd is equivalent to
  adjusted_mode after these changes. Follow-up patches clear this up
  further (by simply ripping out intel_sdvo->input_dtd because it's
  not needed).

v2: Extend commit message with an in-depth bug analysis.

Reported-and-Tested-by: Bernard Blackham <b-linuxgit@largestprime.net>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=48157
Reviewed-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Cc: stable@kernel.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
X