use std::{convert::TryInto, ops::Deref};

use static_assertions::assert_impl_all;
use zvariant::ObjectPath;

use crate::{
    utils::block_on, Error, Interface, InterfaceDeref, InterfaceDerefMut, Result, SignalContext,
};

/// Wrapper over an interface, along with its corresponding `SignalContext`
/// instance. A reference to the underlying interface may be obtained via
/// [`InterfaceRef::get`] and [`InterfaceRef::get_mut`].
pub struct InterfaceRef<I> {
    azync: crate::InterfaceRef<I>,
}

impl<I> InterfaceRef<I>
where
    I: 'static,
{
    /// Get a reference to the underlying interface.
    pub fn get(&self) -> InterfaceDeref<'_, I> {
        block_on(self.azync.get())
    }

    /// Get a reference to the underlying interface.
    ///
    /// **WARNINGS:** Since the `ObjectServer` will not be able to access the interface in question
    /// until the return value of this method is dropped, it is highly recommended that the scope
    /// of the interface returned is restricted.
    ///
    /// # Errors
    ///
    /// If the interface at this instance's path is not valid, `Error::InterfaceNotFound` error is
    /// returned.
    ///
    /// # Examples
    ///
    /// ```no_run
    /// # use std::error::Error;
    /// # use async_io::block_on;
    /// # use zbus::{blocking::Connection, dbus_interface};
    ///
    /// struct MyIface(u32);
    ///
    /// #[dbus_interface(name = "org.myiface.MyIface")]
    /// impl MyIface {
    ///    #[dbus_interface(property)]
    ///    fn count(&self) -> u32 {
    ///        self.0
    ///    }
    /// }
    /// // Setup connection and object_server etc here and then in another part of the code:
    /// #
    /// # let connection = Connection::session()?;
    /// #
    /// # let path = "/org/zbus/path";
    /// # connection.object_server().at(path, MyIface(22))?;
    /// let object_server = connection.object_server();
    /// let iface_ref = object_server.interface::<_, MyIface>(path)?;
    /// let mut iface = iface_ref.get_mut();
    /// iface.0 = 42;
    /// block_on(iface.count_changed(iface_ref.signal_context()))?;
    /// #
    /// # Ok::<_, Box<dyn Error + Send + Sync>>(())
    /// ```
    pub fn get_mut(&self) -> InterfaceDerefMut<'_, I> {
        block_on(self.azync.get_mut())
    }

    pub fn signal_context(&self) -> &SignalContext<'static> {
        self.azync.signal_context()
    }
}

/// A blocking wrapper of [`crate::ObjectServer`].
///
/// # Example
///
/// This example exposes the `org.myiface.Example.Quit` method on the `/org/zbus/path`
/// path.
///
/// ```no_run
/// # use std::error::Error;
/// use zbus::{blocking::Connection, dbus_interface};
/// use event_listener::Event;
///
/// struct Example {
///     // Interfaces are owned by the ObjectServer. They can have
///     // `&mut self` methods.
///     quit_event: Event,
/// }
///
/// impl Example {
///     fn new(quit_event: Event) -> Self {
///         Self { quit_event }
///     }
/// }
///
/// #[dbus_interface(name = "org.myiface.Example")]
/// impl Example {
///     // This will be the "Quit" D-Bus method.
///     fn quit(&mut self) {
///         self.quit_event.notify(1);
///     }
///
///     // See `dbus_interface` documentation to learn
///     // how to expose properties & signals as well.
/// }
///
/// let connection = Connection::session()?;
///
/// let quit_event = Event::new();
/// let quit_listener = quit_event.listen();
/// let interface = Example::new(quit_event);
/// connection
///     .object_server()
///     .at("/org/zbus/path", interface)?;
///
/// quit_listener.wait();
/// # Ok::<_, Box<dyn Error + Send + Sync>>(())
/// ```
#[derive(Debug)]
pub struct ObjectServer {
    azync: crate::ObjectServer,
}

assert_impl_all!(ObjectServer: Send, Sync, Unpin);

impl ObjectServer {
    /// Creates a new D-Bus `ObjectServer`.
    pub(crate) fn new(conn: &crate::Connection) -> Self {
        Self {
            azync: crate::ObjectServer::new(conn),
        }
    }

    /// Register a D-Bus [`Interface`] at a given path. (see the example above)
    ///
    /// Typically you'd want your interfaces to be registered immediately after the associated
    /// connection is established and therefore use [`zbus::blocking::ConnectionBuilder::serve_at`]
    /// instead. However, there are situations where you'd need to register interfaces dynamically
    /// and that's where this method becomes useful.
    ///
    /// If the interface already exists at this path, returns false.
    ///
    /// [`Interface`]: trait.Interface.html
    pub fn at<'p, P, I>(&self, path: P, iface: I) -> Result<bool>
    where
        I: Interface,
        P: TryInto<ObjectPath<'p>>,
        P::Error: Into<Error>,
    {
        block_on(self.azync.at(path, iface))
    }

    /// Unregister a D-Bus [`Interface`] at a given path.
    ///
    /// If there are no more interfaces left at that path, destroys the object as well.
    /// Returns whether the object was destroyed.
    ///
    /// [`Interface`]: trait.Interface.html
    pub fn remove<'p, I, P>(&self, path: P) -> Result<bool>
    where
        I: Interface,
        P: TryInto<ObjectPath<'p>>,
        P::Error: Into<Error>,
    {
        block_on(self.azync.remove::<I, P>(path))
    }

    /// Get the interface at the given path.
    ///
    /// # Errors
    ///
    /// If the interface is not registered at the given path, `Error::InterfaceNotFound` error is
    /// returned.
    ///
    /// # Examples
    ///
    /// The typical use of this is to emit signals outside of a dispatched handler:
    ///
    /// ```no_run
    /// # use std::error::Error;
    /// # use zbus::block_on;
    /// # use zbus::{
    /// #    SignalContext,
    /// #    blocking::Connection,
    /// #    dbus_interface,
    /// # };
    /// #
    /// struct MyIface;
    /// #[dbus_interface(name = "org.myiface.MyIface")]
    /// impl MyIface {
    ///     #[dbus_interface(signal)]
    ///     async fn emit_signal(ctxt: &SignalContext<'_>) -> zbus::Result<()>;
    /// }
    ///
    /// # let connection = Connection::session()?;
    /// #
    /// # let path = "/org/zbus/path";
    /// # connection.object_server().at(path, MyIface)?;
    /// let iface_ref = connection
    ///     .object_server()
    ///     .interface::<_, MyIface>(path)?;
    /// block_on(MyIface::emit_signal(iface_ref.signal_context()))?;
    /// #
    /// #
    /// # Ok::<_, Box<dyn Error + Send + Sync>>(())
    /// ```
    pub fn interface<'p, P, I>(&self, path: P) -> Result<InterfaceRef<I>>
    where
        I: Interface,
        P: TryInto<ObjectPath<'p>>,
        P::Error: Into<Error>,
    {
        Ok(InterfaceRef {
            azync: block_on(self.azync.interface(path))?,
        })
    }

    /// Get a reference to the underlying async ObjectServer.
    pub fn inner(&self) -> &crate::ObjectServer {
        &self.azync
    }

    /// Get the underlying async ObjectServer, consuming `self`.
    pub fn into_inner(self) -> crate::ObjectServer {
        self.azync
    }
}

impl Deref for ObjectServer {
    type Target = crate::ObjectServer;

    fn deref(&self) -> &Self::Target {
        self.inner()
    }
}

impl From<crate::ObjectServer> for ObjectServer {
    fn from(azync: crate::ObjectServer) -> Self {
        Self { azync }
    }
}