ring}}'.", "translation": "'{{.InvalidALBID}}' is not a valid ALB ID. A valid ALB ID contains the string '{{.RequiredString}}'." }, { "id": "'{{.InvalidIP}}' is not a valid IP. A valid IP must be in IPv4 format.", "translation": "'{{.InvalidIP}}' is not a valid IP. A valid IP must be in IPv4 format." }, { "id": "'{{.InvalidVLANID}}' is not a valid VLAN ID.", "translation": "'{{.InvalidVLANID}}' is not a valid VLAN ID." }, { "id": "'{{.InvalidVLANID}}' is not a valid VLAN ID. A valid VLAN ID is a 7 digit integer.", "translation": "'{{.InvalidVLANID}}' is not a valid VLAN ID. A valid VLAN ID is a 7 digit integer." }, { "id": "'{{.SourceOrg}}' and '{{.SourceBranch}}' are not supported parameters.", "translation": "'{{.SourceOrg}}' and '{{.SourceBranch}}' are not supported parameters." }, { "id": "'{{.SourceOrg}}' is not a supported parameter.", "translation": "'{{.SourceOrg}}' is not a supported parameter." }, { "id": "=[,=,...]", "translation": "=[,=,...]" }, { "id": "[,,...]", "translation": "[,,...]" }, { "id": "A capability of the Satellite location.", "translation": "A capability of the Satellite location." }, { "id": "A case-insensitive sub-string that the health check looks for in the response body. If this string is not found, the IP is considered unhealthy. This flag is valid only for type 'HTTP' or 'HTTPS'.", "translation": "A case-insensitive sub-string that the health check looks for in the response body. If this string is not found, the IP is considered unhealthy. This flag is valid only for type 'HTTP' or 'HTTPS'." }, { "id": "A comma separated list of your logging configuration IDs. If not provided, the filter is applied to all the cluster logging configurations that are passed to the filter. You can view log configurations that match the filter by using the --show-matching-configs flag with the command.", "translation": "A comma separated list of your logging configuration IDs. If not provided, the filter is applied to all the cluster logging configurations that are passed to the filter. You can view log configurations that match the filter by using the --show-matching-configs flag with the command." }, { "id": "A location to filter for. To list available locations, run 'ibmcloud ks locations'.", "translation": "A location to filter for. To list available locations, run 'ibmcloud ks locations'." }, { "id": "A logging configuration ID. If not provided, the filter is applied to all the cluster logging configurations that are passed to the filter. You can view log configurations that match the filter by using the --show-matching-configs flag with the command.", "translation": "A logging configuration ID. If not provided, the filter is applied to all the cluster logging configurations that are passed to the filter. You can view log configurations that match the filter by using the --show-matching-configs flag with the command." }, { "id": "A name for the Ingress secret that is created in the cluster.", "translation": "A name for the Ingress secret that is created in the cluster." }, { "id": "A name or ID of an endpoint to disable for this ACL.", "translation": "A name or ID of an endpoint to disable for this ACL." }, { "id": "A name or ID of an endpoint to enable for this ACL.", "translation": "A name or ID of an endpoint to enable for this ACL." }, { "id": "A patch upgrade is available for the current version. To upgrade now, run '{{.Command}}'.", "translation": "A patch upgrade is available for the current version. To upgrade now, run '{{.Command}}'." }, { "id": "A private VLAN must be specified if a public VLAN is specified.", "translation": "A private VLAN must be specified if a public VLAN is specified." }, { "id": "A resource group must be targeted to create a Satellite connector. Execute '{{.Command}}' to continue.", "translation": "A resource group must be targeted to create a Satellite connector. Execute '{{.Command}}' to continue." }, { "id": "A root key ID in your KMS instance. To list available root keys, run 'ibmcloud ks kms crk ls --instance-id '.", "translation": "A root key ID in your KMS instance. To list available root keys, run 'ibmcloud ks kms crk ls --instance-id '." }, { "id": "A zone to filter for. To list available zones, run 'ibmcloud ks locations'.", "translation": "A zone to filter for. To list available zones, run 'ibmcloud ks locations'." }, { "id": "ACL created with ID {{.ID}}", "translation": "ACL created with ID {{.ID}}" }, { "id": "ACL deleted.", "translation": "ACL deleted." }, { "id": "ACL endpoints added.", "translation": "ACL endpoints added." }, { "id": "ACL endpoints removed.", "translation": "ACL endpoints removed." }, { "id": "ACL subnets added.", "translation": "ACL subnets added." }, { "id": "ACL subnets removed.", "translation": "ACL subnets removed." }, { "id": "ACL updated.", "translation": "ACL updated." }, { "id": "ALB", "translation": "ALB" }, { "id": "ALB ID", "translation": "ALB ID" }, { "id": "ALB IP", "translation": "ALB IP" }, { "id": "ALB VLAN ID", "translation": "ALB VLAN ID" }, { "id": "ALB created with ID {{.Alb}}", "translation": "ALB created with ID {{.Alb}}" }, { "id": "ALBs", "translation": "ALBs" }, { "id": "ALBs are at the latest version in cluster {{.Cluster}}", "translation": "ALBs are at the latest version in cluster {{.Cluster}}" }, { "id": "ALBs are not at the latest version in cluster {{.Cluster}}. To view the current version, run '{{.Command}}'.", "translation": "ALBs are not at the latest version in cluster {{.Cluster}}. To view the current version, run '{{.Command}}'." }, { "id": "ALBs that run Kubernetes Ingress image only: The timeout value, in seconds, for the load balancer to receive the PROXY protocol headers.", "translation": "ALBs that run Kubernetes Ingress image only: The timeout value, in seconds, for the load balancer to receive the PROXY protocol headers." }, { "id": "API Endpoint:", "translation": "API Endpoint:" }, { "id": "API Version:", "translation": "API Version:" }, { "id": "API version", "translation": "API version" }, { "id": "Account", "translation": "Account" }, { "id": "Account ID", "translation": "Account ID" }, { "id": "Account Management Commands", "translation": "Account Management Commands" }, { "id": "Action Completed", "translation": "Action Completed" }, { "id": "Action Started", "translation": "Action Started" }, { "id": "Activity Tracker Key Set", "translation": "Activity Tracker Key Set" }, { "id": "Add a cluster to your cluster group. The cluster can run in your Satellite location or in IBM Cloud. To add a cluster that runs in IBM Cloud, you must first register the cluster with Satellite Config.", "translation": "Add a cluster to your cluster group. The cluster can run in your Satellite location or in IBM Cloud. To add a cluster that runs in IBM Cloud, you must first register the cluster with Satellite Config." }, { "id": "Add a description for the Satellite configuration version.", "translation": "Add a description for the Satellite configuration version." }, { "id": "Add a worker node to a cluster. The IBM Cloud account will be charged. Several flags can be omitted if all of the workers in the cluster are uniform.", "translation": "Add a worker node to a cluster. The IBM Cloud account will be charged. Several flags can be omitted if all of the workers in the cluster are uniform." }, { "id": "Add a worker pool to a VPC Gen 1 cluster. No worker nodes are created until zones are added to the worker pool.", "translation": "Add a worker pool to a VPC Gen 1 cluster. No worker nodes are created until zones are added to the worker pool." }, { "id": "Add a worker pool to a VPC Gen 2 cluster. No worker nodes are created until zones are added to the worker pool.", "translation": "Add a worker pool to a VPC Gen 2 cluster. No worker nodes are created until zones are added to the worker pool." }, { "id": "Add a worker pool to a classic cluster. No worker nodes are created until zones are added to the worker pool.", "translation": "Add a worker pool to a classic cluster. No worker nodes are created until zones are added to the worker pool." }, { "id": "Add a worker pool to a cluster. No worker nodes are created until zones are added to the worker pool.", "translation": "Add a worker pool to a cluster. No worker nodes are created until zones are added to the worker pool." }, { "id": "Add a worker pool to an IBM Cloud Satellite cluster. No worker nodes are created until zones are added to the worker pool.", "translation": "Add a worker pool to an IBM Cloud Satellite cluster. No worker nodes are created until zones are added to the worker pool." }, { "id": "Add a zone to one or more worker pools in a Satellite cluster.", "translation": "Add a zone to one or more worker pools in a Satellite cluster." }, { "id": "Add a zone to one or more worker pools in a VPC Gen 1 cluster.", "translation": "Add a zone to one or more worker pools in a VPC Gen 1 cluster." }, { "id": "Add a zone to one or more worker pools in a VPC Gen 2 cluster.", "translation": "Add a zone to one or more worker pools in a VPC Gen 2 cluster." }, { "id": "Add a zone to one or more worker pools in a classic cluster.", "translation": "Add a zone to one or more worker pools in a classic cluster." }, { "id": "Add a zone to one or more worker pools in a cluster.", "translation": "Add a zone to one or more worker pools in a cluster." }, { "id": "Add an IBM Cloud service to a cluster by binding the service instance to a Kubernetes namespace.", "translation": "Add an IBM Cloud service to a cluster by binding the service instance to a Kubernetes namespace." }, { "id": "Add an NLB IP to an existing host name that you created with '{{.Command}}'.", "translation": "Add an NLB IP to an existing host name that you created with '{{.Command}}'." }, { "id": "Add an external domain provider credential for the cluster.", "translation": "Add an external domain provider credential for the cluster." }, { "id": "Add and create portable subnets for a classic cluster.", "translation": "Add and create portable subnets for a classic cluster." }, { "id": "Add and remove user-managed portable subnets for a classic cluster.", "translation": "Add and remove user-managed portable subnets for a classic cluster." }, { "id": "Add fields to an existing Ingress secret.", "translation": "Add fields to an existing Ingress secret." }, { "id": "Add one or more enabled endpoints to an ACL.", "translation": "Add one or more enabled endpoints to an ACL." }, { "id": "Add one or more subnets to an ACL.", "translation": "Add one or more subnets to an ACL." }, { "id": "Add portable private IPs by making your own portable subnet on a private VLAN available to a classic cluster.", "translation": "Add portable private IPs by making your own portable subnet on a private VLAN available to a classic cluster." }, { "id": "Add subnets to a Satellite cluster's service endpoint allowlist.", "translation": "Add subnets to a Satellite cluster's service endpoint allowlist." }, { "id": "Add subnets to a cluster's private service endpoint allowlist.", "translation": "Add subnets to a cluster's private service endpoint allowlist." }, { "id": "Add warnings to be ignored by Ingress status for a cluster.", "translation": "Add warnings to be ignored by Ingress status for a cluster." }, { "id": "Add-on Options", "translation": "Add-on Options" }, { "id": "Added context for {{.Cluster}} to the current kubeconfig file.", "translation": "Added context for {{.Cluster}} to the current kubeconfig file." }, { "id": "Adding IP(s) {{.IPs}} to NLB host name {{.Host}} in cluster {{.Cluster}} ...", "translation": "Adding IP(s) {{.IPs}} to NLB host name {{.Host}} in cluster {{.Cluster}} ..." }, { "id": "Additional Storage", "translation": "Additional Storage" }, { "id": "Addons", "translation": "Addons" }, { "id": "Address", "translation": "Address" }, { "id": "After the errors are resolved, run `ibmcloud ks ingress instance register` to register the instance to your cluster.", "translation": "After the errors are resolved, run `ibmcloud ks ingress instance register` to register the instance to your cluster." }, { "id": "After you run this command, existing load balancers are deleted and recreated, which can cause service disruptions. Two unused IP addresses for each new load balancer must be available in each subnet during the load balancer recreation. Modify the PROXY protocol configuration?", "translation": "After you run this command, existing load balancers are deleted and recreated, which can cause service disruptions. Two unused IP addresses for each new load balancer must be available in each subnet during the load balancer recreation. Modify the PROXY protocol configuration?" }, { "id": "After you run this command, the cluster cannot be restored. Remove the cluster {{.Cluster}}?", "translation": "After you run this command, the cluster cannot be restored. Remove the cluster {{.Cluster}}?" }, { "id": "After you run this command, the domain cannot be recovered. If you need a new domain, you must generate one by running 'ibmcloud ks ingress domain create'. Are you sure you want to remove the domain {{.Domain}}?", "translation": "After you run this command, the domain cannot be recovered. If you need a new domain, you must generate one by running 'ibmcloud ks ingress domain create'. Are you sure you want to remove the domain {{.Domain}}?" }, { "id": "After you run this command, the location cannot be restored. Remove the location {{.Controller}}?", "translation": "After you run this command, the location cannot be restored. Remove the location {{.Controller}}?" }, { "id": "After you run this command, the secret cannot be recovered. If you need a new secret, you must generate one by running 'ibmcloud ks ingress domain secret regenerate'. Are you sure you want to remove the secret for domain {{.Domain}}?", "translation": "After you run this command, the secret cannot be recovered. If you need a new secret, you must generate one by running 'ibmcloud ks ingress domain secret regenerate'. Are you sure you want to remove the secret for domain {{.Domain}}?" }, { "id": "After you run this command, the secret cannot be recovered. If you need a new secret, you must generate one by running 'ibmcloud ks nlb-dns secret regenerate'. Remove the secret for NLB subdomain {{.Subdomain}}?", "translation": "After you run this command, the secret cannot be recovered. If you need a new secret, you must generate one by running 'ibmcloud ks nlb-dns secret regenerate'. Remove the secret for NLB subdomain {{.Subdomain}}?" }, { "id": "All outbound traffic from your cluster will be permitted. Do you want to continue?", "translation": "All outbound traffic from your cluster will be permitted. Do you want to continue?" }, { "id": "All outbound traffic is blocked unless it is allowed by a security group. Do you want to continue?", "translation": "All outbound traffic is blocked unless it is allowed by a security group. Do you want to continue?" }, { "id": "Allow Insecure", "translation": "Allow Insecure" }, { "id": "Allow an insecure HTTP connection.", "translation": "Allow an insecure HTTP connection." }, { "id": "Allow insecure SSL certificates.", "translation": "Allow insecure SSL certificates." }, { "id": "Ambigous usage of '{{.HeaderFlag}}' flag. To delete all existing headers specify the flag once with empty value: '{{.HeaderFlag}} \"\"'. To replace existing headers specify the flag once or multiple times with the new header definitions: '{{.HeaderFlag}} Header-Name=value'.", "translation": "Ambigous usage of '{{.HeaderFlag}}' flag. To delete all existing headers specify the flag once with empty value: '{{.HeaderFlag}} \"\"'. To replace existing headers specify the flag once or multiple times with the new header definitions: '{{.HeaderFlag}} Header-Name=value'." }, { "id": "An IP or CIDR block allowed by this ACL. Value must be fully contained in the follwowing CIDRs: 10.0.0.0/8, 161.26.0.0/16, 166.8.0.0/14, 172.16.0.0/12.", "translation": "An IP or CIDR block allowed by this ACL. Value must be fully contained in the follwowing CIDRs: 10.0.0.0/8, 161.26.0.0/16, 166.8.0.0/14, 172.16.0.0/12." }, { "id": "An argument was used without a flag: '{{.Argument}}'. Each argument requires a flag. To see available flags, run '{{.Command}}'.", "translation": "An argument was used without a flag: '{{.Argument}}'. Each argument requires a flag. To see available flags, run '{{.Command}}'." }, { "id": "An error occurred while waiting for RBAC to synchronize. '{{.Kubectl}}' commands might fail.", "translation": "An error occurred while waiting for RBAC to synchronize. '{{.Kubectl}}' commands might fail." }, { "id": "An error was hit adding the zone to {{.FailedPool}}.", "translation": "An error was hit adding the zone to {{.FailedPool}}." }, { "id": "An invalid value was specified for --{{.FlagName}}: {{.InvalidValue}}", "translation": "An invalid value was specified for --{{.FlagName}}: {{.InvalidValue}}" }, { "id": "An update is available for the ALB pods. Review any potentially disruptive changes for the latest version before you update: {{.ReleaseNotesURL}}", "translation": "An update is available for the ALB pods. Review any potentially disruptive changes for the latest version before you update: {{.ReleaseNotesURL}}" }, { "id": "An update is available for the cluster. To view the update version, run '{{.Command}}'. Review and make any required version changes before you update: {{.ReleaseNotesURL}}", "translation": "An update is available for the cluster. To view the update version, run '{{.Command}}'. Review and make any required version changes before you update: {{.ReleaseNotesURL}}" }, { "id": "An upgrade is available for the Satellite Mesh instance. To view the upgrade, run '{{.Command}}'.", "translation": "An upgrade is available for the Satellite Mesh instance. To view the upgrade, run '{{.Command}}'." }, { "id": "An upgrade is available for these versions", "translation": "An upgrade is available for these versions" }, { "id": "Analyzing the infrastructure permissions for resource group {{.ResourceGroup}}...", "translation": "Analyzing the infrastructure permissions for resource group {{.ResourceGroup}}..." }, { "id": "Application Containers", "translation": "Application Containers" }, { "id": "Apply storage configuration changes to the associated assignments.", "translation": "Apply storage configuration changes to the associated assignments." }, { "id": "Apply the latest Satellite storage configuration version to all assignments of a configuration. To list a configuration's assignments, run 'ibmcloud sat storage assignment ls --config CONFIG'.", "translation": "Apply the latest Satellite storage configuration version to all assignments of a configuration. To list a configuration's assignments, run 'ibmcloud sat storage assignment ls --config CONFIG'." }, { "id": "Apply the latest patch updates to a Satellite storage configuration. Patch updates contain vulnerability remediations and bug fixes within the same major version.", "translation": "Apply the latest patch updates to a Satellite storage configuration. Patch updates contain vulnerability remediations and bug fixes within the same major version." }, { "id": "Architecture", "translation": "Architecture" }, { "id": "Are you sure you want to create new primary key {{.OrgKey}}?", "translation": "Are you sure you want to create new primary key {{.OrgKey}}?" }, { "id": "Are you sure you want to delete Satellite connector {{.ID}} / {{.Name}}?", "translation": "Are you sure you want to delete Satellite connector {{.ID}} / {{.Name}}?" }, { "id": "Are you sure you want to delete Subscription {{.Subscription}}?", "translation": "Are you sure you want to delete Subscription {{.Subscription}}?" }, { "id": "Are you sure you want to delete assignment {{.Assignment}}?", "translation": "Are you sure you want to delete assignment {{.Assignment}}?" }, { "id": "Are you sure you want to delete key {{.OrgKey}}?", "translation": "Are you sure you want to delete key {{.OrgKey}}?" }, { "id": "Are you sure you want to delete this storage configuration {{.Configuration}} and its assignments?", "translation": "Are you sure you want to delete this storage configuration {{.Configuration}} and its assignments?" }, { "id": "Are you sure you want to delete this storage configuration {{.Configuration}}?", "translation": "Are you sure you want to delete this storage configuration {{.Configuration}}?" }, { "id": "Are you sure you want to disable automatic updates for {{.Cluster}}?", "translation": "Are you sure you want to disable automatic updates for {{.Cluster}}?" }, { "id": "Are you sure you want to enable automatic updates for {{.Cluster}}?", "translation": "Are you sure you want to enable automatic updates for {{.Cluster}}?" }, { "id": "Are you sure you want to remove cluster group '{{.ClusterGroup}}'?", "translation": "Are you sure you want to remove cluster group '{{.ClusterGroup}}'?" }, { "id": "Are you sure you want to remove clusters '{{.Clusters}}' from cluster group '{{.ClusterGroup}}'?", "translation": "Are you sure you want to remove clusters '{{.Clusters}}' from cluster group '{{.ClusterGroup}}'?" }, { "id": "Are you sure you want to set params for storage configuration {{.Config}} and apply the latest configuration version to all assignments of the configuration?", "translation": "Are you sure you want to set params for storage configuration {{.Config}} and apply the latest configuration version to all assignments of the configuration?" }, { "id": "Are you sure you want to set params for storage configuration {{.Config}}?", "translation": "Are you sure you want to set params for storage configuration {{.Config}}?" }, { "id": "Are you sure you want to unregister cluster '{{.Cluster}}' from Satellite configuration?", "translation": "Are you sure you want to unregister cluster '{{.Cluster}}' from Satellite configuration?" }, { "id": "Are you sure you want to update the assignment {{.Assignment}}?", "translation": "Are you sure you want to update the assignment {{.Assignment}}?" }, { "id": "Are you sure you want to update the identity used by subscription {{.subscriptionUUID}}?", "translation": "Are you sure you want to update the identity used by subscription {{.subscriptionUUID}}?" }, { "id": "Are you sure you want to update the subscription {{.Subscription}}?", "translation": "Are you sure you want to update the subscription {{.Subscription}}?" }, { "id": "Are you sure you want to update your worker node {{.WorkerIDs}} to {{.TargetVersion}}?", "translation": "Are you sure you want to update your worker node {{.WorkerIDs}} to {{.TargetVersion}}?" }, { "id": "Are you sure you want to update your worker pools {{.Pools}} in zone {{.Zone}} to use private VLAN {{.PrivateVlan}} and no public VLAN?", "translation": "Are you sure you want to update your worker pools {{.Pools}} in zone {{.Zone}} to use private VLAN {{.PrivateVlan}} and no public VLAN?" }, { "id": "Are you sure you want to update your worker pools {{.Pools}} in zone {{.Zone}} to use private VLAN {{.PrivateVlan}} and public VLAN {{.PublicVlan}}?", "translation": "Are you sure you want to update your worker pools {{.Pools}} in zone {{.Zone}} to use private VLAN {{.PrivateVlan}} and public VLAN {{.PublicVlan}}?" }, { "id": "Are you sure you want to update your worker pools {{.Pools}} in zone {{.Zone}} to use private VLAN {{.PrivateVlan}}?", "translation": "Are you sure you want to update your worker pools {{.Pools}} in zone {{.Zone}} to use private VLAN {{.PrivateVlan}}?" }, { "id": "Are you sure you want to upgrade the assignment {{.Assignment}} to the latest storage configuration version?", "translation": "Are you sure you want to upgrade the assignment {{.Assignment}} to the latest storage configuration version?" }, { "id": "Are you sure you want to upgrade your storage configuration {{.Configuration}} to use the latest storage template revision? Template revisions, if available, include the latest storage driver patch updates.", "translation": "Are you sure you want to upgrade your storage configuration {{.Configuration}} to use the latest storage template revision? Template revisions, if available, include the latest storage driver patch updates." }, { "id": "Assign a host to a Satellite location control plane or cluster.", "translation": "Assign a host to a Satellite location control plane or cluster." }, { "id": "Assigned the host {{.ID}} to cluster {{.Cluster}}.", "translation": "Assigned the host {{.ID}} to cluster {{.Cluster}}." }, { "id": "Assigning host...", "translation": "Assigning host..." }, { "id": "Assignment", "translation": "Assignment" }, { "id": "Assignment Type", "translation": "Assignment Type" }, { "id": "Assignment Upgrade Available", "translation": "Assignment Upgrade Available" }, { "id": "Assignment upgrade is available.", "translation": "Assignment upgrade is available." }, { "id": "Assignment {{.Assignment}} could not be updated.", "translation": "Assignment {{.Assignment}} could not be updated." }, { "id": "Assignment {{.Assignment}} could not be upgraded.", "translation": "Assignment {{.Assignment}} could not be upgraded." }, { "id": "Assignment {{.Assignment}} was successfully created with ID {{.ID}}.", "translation": "Assignment {{.Assignment}} was successfully created with ID {{.ID}}." }, { "id": "Assignment {{.Assignment}} was successfully removed.", "translation": "Assignment {{.Assignment}} was successfully removed." }, { "id": "Assignment {{.Assignment}} was successfully updated.", "translation": "Assignment {{.Assignment}} was successfully updated." }, { "id": "Assignment {{.Assignment}} was successfully upgraded.", "translation": "Assignment {{.Assignment}} was successfully upgraded." }, { "id": "Attach a storage volume to a worker node.", "translation": "Attach a storage volume to a worker node." }, { "id": "Attach hosts to the location with labels that match the pending host requests of the service. To check the details of the needed hosts, run this command again with the '--output json' flag and review the 'unsatistfiedLabels' array.", "translation": "Attach hosts to the location with labels that match the pending host requests of the service. To check the details of the needed hosts, run this command again with the '--output json' flag and review the 'unsatistfiedLabels' array." }, { "id": "Attached To", "translation": "Attached To" }, { "id": "Attaching clusters to group...", "translation": "Attaching clusters to group..." }, { "id": "Attempt the update even if the change is greater than two minor versions from the worker node's current version.", "translation": "Attempt the update even if the change is greater than two minor versions from the worker node's current version." }, { "id": "Automatic updates of the ALB pods are {{.Status}} in cluster {{.Cluster}}", "translation": "Automatic updates of the ALB pods are {{.Status}} in cluster {{.Cluster}}" }, { "id": "Automatic updates of the Fluentd pods are {{.Status}} in cluster {{.Cluster}}", "translation": "Automatic updates of the Fluentd pods are {{.Status}} in cluster {{.Cluster}}" }, { "id": "Automatic updates of the master to the latest patch version are disabled for cluster {{.Cluster}}.", "translation": "Automatic updates of the master to the latest patch version are disabled for cluster {{.Cluster}}." }, { "id": "Automatic updates of the master to the latest patch version are enabled for cluster {{.Cluster}}.", "translation": "Automatic updates of the master to the latest patch version are enabled for cluster {{.Cluster}}." }, { "id": "Available IPv4 Addresses", "translation": "Available IPv4 Addresses" }, { "id": "Available options: {{.Options}}", "translation": "Available options: {{.Options}}" }, { "id": "Available zones retrieved. Retrieving flavors for each zone...", "translation": "Available zones retrieved. Retrieving flavors for each zone..." }, { "id": "Average CPU utilization threshold. Used to dynamically calculate the number of replicas.", "translation": "Average CPU utilization threshold. Used to dynamically calculate the number of replicas." }, { "id": "Beta", "translation": "Beta" }, { "id": "Binding service instance to namespace...", "translation": "Binding service instance to namespace..." }, { "id": "Both versions of the same flag, {{.OriginalFlag}} and {{.DuplicateFlag}}, were specified. Specify one version of the flag and try again.", "translation": "Both versions of the same flag, {{.OriginalFlag}} and {{.DuplicateFlag}}, were specified. Specify one version of the flag and try again." }, { "id": "Bound Cluster", "translation": "Bound Cluster" }, { "id": "Build", "translation": "Build" }, { "id": "CA Cert", "translation": "CA Cert" }, { "id": "CA certificate creation complete. Ensure that your worker nodes are reloaded before you start a CA certificate rotation.", "translation": "CA certificate creation complete. Ensure that your worker nodes are reloaded before you start a CA certificate rotation." }, { "id": "CA certificate creation in progress.", "translation": "CA certificate creation in progress." }, { "id": "CA certificate rotation complete.", "translation": "CA certificate rotation complete." }, { "id": "CA certificate rotation in progress.", "translation": "CA certificate rotation in progress." }, { "id": "CIDR", "translation": "CIDR" }, { "id": "COMMANDS:", "translation": "COMMANDS:" }, { "id": "CPU Allocation", "translation": "CPU Allocation" }, { "id": "CPU Average Utilization", "translation": "CPU Average Utilization" }, { "id": "CPU Capacity", "translation": "CPU Capacity" }, { "id": "CRK", "translation": "CRK" }, { "id": "CRN", "translation": "CRN" }, { "id": "CRN of the IBM Cloud Secret Manager instance.", "translation": "CRN of the IBM Cloud Secret Manager instance." }, { "id": "Callback Channel", "translation": "Callback Channel" }, { "id": "Cannot find configuration version:", "translation": "Cannot find configuration version:" }, { "id": "Cannot find configuration:", "translation": "Cannot find configuration:" }, { "id": "Cannot have a Secret Group ID for non-default instances.", "translation": "Cannot have a Secret Group ID for non-default instances." }, { "id": "Capabilities", "translation": "Capabilities" }, { "id": "Capacity GB", "translation": "Capacity GB" }, { "id": "Cert Provider", "translation": "Cert Provider" }, { "id": "Certificate CRN", "translation": "Certificate CRN" }, { "id": "Change a cluster's default Ingress domain.", "translation": "Change a cluster's default Ingress domain." }, { "id": "Change the outbound traffic protection for a Secure By Default VPC cluster.", "translation": "Change the outbound traffic protection for a Secure By Default VPC cluster." }, { "id": "Changing {{.Feature}} requires the cluster's API server to automatically refresh. Do you want to continue?", "translation": "Changing {{.Feature}} requires the cluster's API server to automatically refresh. Do you want to continue?" }, { "id": "Check whether the credentials that allow access to the IBM Cloud classic infrastructure portfolio for the targeted resource group are missing suggested or required infrastructure permissions.", "translation": "Check whether the credentials that allow access to the IBM Cloud classic infrastructure portfolio for the targeted resource group are missing suggested or required infrastructure permissions." }, { "id": "Checking for the default Kubernetes version...", "translation": "Checking for the default Kubernetes version..." }, { "id": "Classic", "translation": "Classic" }, { "id": "Classic Infrastructure Zones", "translation": "Classic Infrastructure Zones" }, { "id": "Clean up any resources and ConfigMaps that you no longer need, such as after an Ingress migration.", "translation": "Clean up any resources and ConfigMaps that you no longer need, such as after an Ingress migration." }, { "id": "Clearing existing certs returned an error: '{{.DeleteErr}}'.", "translation": "Clearing existing certs returned an error: '{{.DeleteErr}}'." }, { "id": "Cluster", "translation": "Cluster" }, { "id": "Cluster Components Commands", "translation": "Cluster Components Commands" }, { "id": "Cluster Count", "translation": "Cluster Count" }, { "id": "Cluster Group", "translation": "Cluster Group" }, { "id": "Cluster Group {{.ClusterGroup}} successfully attached {{.Modified}} clusters.", "translation": "Cluster Group {{.ClusterGroup}} successfully attached {{.Modified}} clusters." }, { "id": "Cluster Group {{.ClusterGroup}} successfully detached {{.Modified}} clusters.", "translation": "Cluster Group {{.ClusterGroup}} successfully detached {{.Modified}} clusters." }, { "id": "Cluster Groups", "translation": "Cluster Groups" }, { "id": "Cluster ID", "translation": "Cluster ID" }, { "id": "Cluster Management Commands", "translation": "Cluster Management Commands" }, { "id": "Cluster Name", "translation": "Cluster Name" }, { "id": "Cluster Status", "translation": "Cluster Status" }, { "id": "Cluster created with ID {{.Cluster}}", "translation": "Cluster created with ID {{.Cluster}}" }, { "id": "Cluster {{.Cluster}} was successfully unregistered.", "translation": "Cluster {{.Cluster}} was successfully unregistered." }, { "id": "Cluster {{.clusterNameOrID}} was not found under this account.", "translation": "Cluster {{.clusterNameOrID}} was not found under this account." }, { "id": "Clusters", "translation": "Clusters" }, { "id": "Code of the warning to be ignored.", "translation": "Code of the warning to be ignored." }, { "id": "Code of the warning to be removed.", "translation": "Code of the warning to be removed." }, { "id": "Command not found", "translation": "Command not found" }, { "id": "Conditional", "translation": "Conditional" }, { "id": "Conditions", "translation": "Conditions" }, { "id": "Configuration", "translation": "Configuration" }, { "id": "Configuration Commands", "translation": "Configuration Commands" }, { "id": "Configuration ID", "translation": "Configuration ID" }, { "id": "Configuration Name", "translation": "Configuration Name" }, { "id": "Configuration Parameters", "translation": "Configuration Parameters" }, { "id": "Configuration Version", "translation": "Configuration Version" }, { "id": "Configuration Version {{.ConfigurationVersion}} was successfully created with ID {{.ID}}.", "translation": "Configuration Version {{.ConfigurationVersion}} was successfully created with ID {{.ID}}." }, { "id": "Configuration saved:", "translation": "Configuration saved:" }, { "id": "Configuration version {{.Configuration}} was successfully removed.", "translation": "Configuration version {{.Configuration}} was successfully removed." }, { "id": "Configuration versions", "translation": "Configuration versions" }, { "id": "Configuration {{.Configuration}} was successfully created with ID {{.ID}}.", "translation": "Configuration {{.Configuration}} was successfully created with ID {{.ID}}." }, { "id": "Configuration {{.Configuration}} was successfully removed.", "translation": "Configuration {{.Configuration}} was successfully removed." }, { "id": "Configuration {{.Configuration}} was successfully renamed to {{.Name}}.", "translation": "Configuration {{.Configuration}} was successfully renamed to {{.Name}}." }, { "id": "Configure a health check monitor for an existing NLB host name in a cluster. To enable the monitor, include the '--enable' flag. To update an existing monitor, include only the flags for the settings that you want to change.", "translation": "Configure a health check monitor for an existing NLB host name in a cluster. To enable the monitor, include the '--enable' flag. To update an existing monitor, include only the flags for the settings that you want to change." }, { "id": "Configure authentication settings for an endpoint.", "translation": "Configure authentication settings for an endpoint." }, { "id": "Configure autoscaling for Ingress ALBs.", "translation": "Configure autoscaling for Ingress ALBs." }, { "id": "Configure endpoints for an ACL.", "translation": "Configure endpoints for an ACL." }, { "id": "Configure subnets for an ACL.", "translation": "Configure subnets for an ACL." }, { "id": "Configured custom metrics", "translation": "Configured custom metrics" }, { "id": "Configured metrics", "translation": "Configured metrics" }, { "id": "Configuring ALB...", "translation": "Configuring ALB..." }, { "id": "Configuring the health check monitor for NLB pods...", "translation": "Configuring the health check monitor for NLB pods..." }, { "id": "Consecutive commas are not supported in a key value pair list. Remove the extra comma and try again.", "translation": "Consecutive commas are not supported in a key value pair list. Remove the extra comma and try again." }, { "id": "Consecutive equal signs are not supported in a key value pair list. Remove the extra equal sign and try again.", "translation": "Consecutive equal signs are not supported in a key value pair list. Remove the extra equal sign and try again." }, { "id": "Container", "translation": "Container" }, { "id": "Cores", "translation": "Cores" }, { "id": "Could not complete request: {{.Error}}", "translation": "Could not complete request: {{.Error}}" }, { "id": "Could not remove assignment {{.Assignment}}.", "translation": "Could not remove assignment {{.Assignment}}." }, { "id": "Could not remove cluster group '{{.ClusterGroup}}'.", "translation": "Could not remove cluster group '{{.ClusterGroup}}'." }, { "id": "Could not retrieve the user messages at this time. Try again later. If the problem persists contact IBM Cloud support.", "translation": "Could not retrieve the user messages at this time. Try again later. If the problem persists contact IBM Cloud support." }, { "id": "Country", "translation": "Country" }, { "id": "Covering Filters", "translation": "Covering Filters" }, { "id": "Create a CA certificate for your cluster. Then, you must rotate the previous certificates to use the new certificates.", "translation": "Create a CA certificate for your cluster. Then, you must rotate the previous certificates to use the new certificates." }, { "id": "Create a DNS host name to register a load balancer host name in a VPC cluster.", "translation": "Create a DNS host name to register a load balancer host name in a VPC cluster." }, { "id": "Create a DNS host name to register one or more NLB IPs in a classic cluster.", "translation": "Create a DNS host name to register one or more NLB IPs in a classic cluster." }, { "id": "Create a DNS host name.", "translation": "Create a DNS host name." }, { "id": "Create a DNS record to register a load balancer host name or load balancer IP addresses in a VPC cluster.", "translation": "Create a DNS record to register a load balancer host name or load balancer IP addresses in a VPC cluster." }, { "id": "Create a Satellite connector.", "translation": "Create a Satellite connector." }, { "id": "Create a Satellite location. A Satellite location is a representation of an environment in your infrastructure provider. After you create a location, attach hosts from separate zones of your backing infrastructure environment with the 'ibmcloud sat host attach' command.", "translation": "Create a Satellite location. A Satellite location is a representation of an environment in your infrastructure provider. After you create a location, attach hosts from separate zones of your backing infrastructure environment with the 'ibmcloud sat host attach' command." }, { "id": "Create a Satellite storage configuration to install storage drivers in your clusters.", "translation": "Create a Satellite storage configuration to install storage drivers in your clusters." }, { "id": "Create a Satellite subscription for clusters. After you create the subscription, the associated Satellite configuration version is automatically deployed to the subscribed clusters.", "translation": "Create a Satellite subscription for clusters. After you create the subscription, the associated Satellite configuration version is automatically deployed to the subscribed clusters." }, { "id": "Create a classic or VPC cluster.", "translation": "Create a classic or VPC cluster." }, { "id": "Create a cluster group. Then, you can subscribe the cluster group to a Satellite configuration.", "translation": "Create a cluster group. Then, you can subscribe the cluster group to a Satellite configuration." }, { "id": "Create a cluster in your Virtual Private Cloud (VPC) with Hyper Protect virtual servers.", "translation": "Create a cluster in your Virtual Private Cloud (VPC) with Hyper Protect virtual servers." }, { "id": "Create a cluster with a public gateway to control inbound and outbound network traffic to the cluster. The cluster is created with a 'gateway' worker pool for the gateway and a 'compute' worker pool for your workloads. For more information, see {{.URL}}. When set, '--{{.Flag}}' must also be set.", "translation": "Create a cluster with a public gateway to control inbound and outbound network traffic to the cluster. The cluster is created with a 'gateway' worker pool for the gateway and a 'compute' worker pool for your workloads. For more information, see {{.URL}}. When set, '--{{.Flag}}' must also be set." }, { "id": "Create a cluster with worker nodes on Virtual Private Cloud (VPC) Gen 1 infrastructure.", "translation": "Create a cluster with worker nodes on Virtual Private Cloud (VPC) Gen 1 infrastructure." }, { "id": "Create a cluster with worker nodes on Virtual Private Cloud (VPC) Gen 2 infrastructure.", "translation": "Create a cluster with worker nodes on Virtual Private Cloud (VPC) Gen 2 infrastructure." }, { "id": "Create a cluster with worker nodes on classic infrastructure.", "translation": "Create a cluster with worker nodes on classic infrastructure." }, { "id": "Create a configuration to specify what Kubernetes resources you want to deploy to your clusters in your Satellite workloads.", "translation": "Create a configuration to specify what Kubernetes resources you want to deploy to your clusters in your Satellite workloads." }, { "id": "Create a configuration version to update existing Kubernetes resources for your Satellite workloads.", "translation": "Create a configuration version to update existing Kubernetes resources for your Satellite workloads." }, { "id": "Create a custom Satellite storage class.", "translation": "Create a custom Satellite storage class." }, { "id": "Create a dedicated host pool.", "translation": "Create a dedicated host pool." }, { "id": "Create a dedicated host.", "translation": "Create a dedicated host." }, { "id": "Create a logging configuration. If you are using a Dedicated account, you must log in to the public IBM Cloud endpoint and target your public org and space to enable log forwarding.", "translation": "Create a logging configuration. If you are using a Dedicated account, you must log in to the public IBM Cloud endpoint and target your public org and space to enable log forwarding." }, { "id": "Create a new Satellite Mesh instance in an existing Satellite cluster.", "translation": "Create a new Satellite Mesh instance in an existing Satellite cluster." }, { "id": "Create a portable subnet on your public or private VLAN and make it available to a classic cluster.", "translation": "Create a portable subnet on your public or private VLAN and make it available to a classic cluster." }, { "id": "Create an ACL.", "translation": "Create an ACL." }, { "id": "Create an IBM Cloud Satellite cluster on your own infrastructure.", "translation": "Create an IBM Cloud Satellite cluster on your own infrastructure." }, { "id": "Create an Ingress domain for a cluster.", "translation": "Create an Ingress domain for a cluster." }, { "id": "Create an Ingress secret in a cluster for a secret stored in IBM Cloud Secret Manager.", "translation": "Create an Ingress secret in a cluster for a secret stored in IBM Cloud Secret Manager." }, { "id": "Create an assignment to deploy your storage configurations to clusters in your Satellite location.", "translation": "Create an assignment to deploy your storage configurations to clusters in your Satellite location." }, { "id": "Create an endpoint.", "translation": "Create an endpoint." }, { "id": "Create and download a script that you can run on your hosts to attach them to your location. For RHCOS enabled locations, the script is an ignition file.", "translation": "Create and download a script that you can run on your hosts to attach them to your location. For RHCOS enabled locations, the script is an ignition file." }, { "id": "Create and enable an Ingress ALB in a VPC Gen 1 cluster.", "translation": "Create and enable an Ingress ALB in a VPC Gen 1 cluster." }, { "id": "Create and enable an Ingress ALB in a VPC Gen 2 cluster.", "translation": "Create and enable an Ingress ALB in a VPC Gen 2 cluster." }, { "id": "Create and enable an Ingress ALB in a classic cluster.", "translation": "Create and enable an Ingress ALB in a classic cluster." }, { "id": "Create and enable an Ingress ALB in a cluster.", "translation": "Create and enable an Ingress ALB in a cluster." }, { "id": "Create and manage health check monitors for network load balancer (NLB) IP addresses and host names in a cluster", "translation": "Create and manage health check monitors for network load balancer (NLB) IP addresses and host names in a cluster" }, { "id": "Create and manage host names for network load balancer (NLB) IP addresses in a cluster and health check monitors for host names.", "translation": "Create and manage host names for network load balancer (NLB) IP addresses in a cluster and health check monitors for host names." }, { "id": "Create, view, and modify Satellite connectors. Acquire connector agents.", "translation": "Create, view, and modify Satellite connectors. Acquire connector agents." }, { "id": "Create, view, and modify Satellite locations.", "translation": "Create, view, and modify Satellite locations." }, { "id": "Created", "translation": "Created" }, { "id": "Created At", "translation": "Created At" }, { "id": "Created Date", "translation": "Created Date" }, { "id": "Created On", "translation": "Created On" }, { "id": "Created cluster group '{{.ClusterGroup}}' with ID '{{.ID}}'.", "translation": "Created cluster group '{{.ClusterGroup}}' with ID '{{.ID}}'." }, { "id": "Creating ALB...", "translation": "Creating ALB..." }, { "id": "Creating NLB DNS...", "translation": "Creating NLB DNS..." }, { "id": "Creating Satellite connector...", "translation": "Creating Satellite connector..." }, { "id": "Creating Satellite storage configuration...", "translation": "Creating Satellite storage configuration..." }, { "id": "Creating a CA certificate refreshes the cluster API server. However, the new certificates are not used until you rotate the certificates. Before you rotate, update any tooling that relies on previous certificates to use the new certificates. Are you sure you want new CA certificates for cluster '{{.Cluster}}'?", "translation": "Creating a CA certificate refreshes the cluster API server. However, the new certificates are not used until you rotate the certificates. Before you rotate, update any tooling that relies on previous certificates to use the new certificates. Are you sure you want new CA certificates for cluster '{{.Cluster}}'?" }, { "id": "Creating a Key Protect configuration for the Key Management Service provider in {{.Cluster}}...", "translation": "Creating a Key Protect configuration for the Key Management Service provider in {{.Cluster}}..." }, { "id": "Creating a log forwarding filter for cluster {{.Cluster}}...", "translation": "Creating a log forwarding filter for cluster {{.Cluster}}..." }, { "id": "Creating assignment...", "translation": "Creating assignment..." }, { "id": "Creating cluster group...", "translation": "Creating cluster group..." }, { "id": "Creating cluster...", "translation": "Creating cluster..." }, { "id": "Creating configuration version...", "translation": "Creating configuration version..." }, { "id": "Creating configuration...", "translation": "Creating configuration..." }, { "id": "Creating host registration script...", "translation": "Creating host registration script..." }, { "id": "Creating key...", "translation": "Creating key..." }, { "id": "Creating location...", "translation": "Creating location..." }, { "id": "Creating logging configuration for {{.LogSource}} logs in cluster {{.Cluster}}...", "translation": "Creating logging configuration for {{.LogSource}} logs in cluster {{.Cluster}}..." }, { "id": "Creating subscription...", "translation": "Creating subscription..." }, { "id": "Creating the image pull secrets in namespace '{{.Namespace}}'. The process might take a few minutes to complete.", "translation": "Creating the image pull secrets in namespace '{{.Namespace}}'. The process might take a few minutes to complete." }, { "id": "Creating volume attachment...", "translation": "Creating volume attachment..." }, { "id": "Creating {{.Domain}}", "translation": "Creating {{.Domain}}" }, { "id": "Creator", "translation": "Creator" }, { "id": "Credential", "translation": "Credential" }, { "id": "Current Revision", "translation": "Current Revision" }, { "id": "DOCS:", "translation": "DOCS:" }, { "id": "Data", "translation": "Data" }, { "id": "Data Location", "translation": "Data Location" }, { "id": "Data and resources that you created for the add-on might be deleted when the add-on is disabled. Continue?", "translation": "Data and resources that you created for the add-on might be deleted when the add-on is disabled. Continue?" }, { "id": "Data plane cluster ID", "translation": "Data plane cluster ID" }, { "id": "Data plane cluster name", "translation": "Data plane cluster name" }, { "id": "Date", "translation": "Date" }, { "id": "Dedicated Host ID", "translation": "Dedicated Host ID" }, { "id": "Dedicated Host Pool ID", "translation": "Dedicated Host Pool ID" }, { "id": "Dedicated data centers are not supported in VPC. Disable dedicated or remove the '{{.Provider}}' flag and try the command again.", "translation": "Dedicated data centers are not supported in VPC. Disable dedicated or remove the '{{.Provider}}' flag and try the command again." }, { "id": "Dedicated host created with ID {{.ID}}.", "translation": "Dedicated host created with ID {{.ID}}." }, { "id": "Dedicated host placement disabled on dedicated host {{.Host}}.", "translation": "Dedicated host placement disabled on dedicated host {{.Host}}." }, { "id": "Dedicated host placement enabled on dedicated host {{.Host}}.", "translation": "Dedicated host placement enabled on dedicated host {{.Host}}." }, { "id": "Dedicated host pool created with ID {{.ID}}.", "translation": "Dedicated host pool created with ID {{.ID}}." }, { "id": "Default", "translation": "Default" }, { "id": "Default Value", "translation": "Default Value" }, { "id": "Delete ACL {{.ACL}}?", "translation": "Delete ACL {{.ACL}}?" }, { "id": "Delete Ingress resources of class {{.IKSClass}}, class {{.NginxClass}}, or of no class for public or private ALBs that run the IBM Cloud Kubernetes Service Ingress image.", "translation": "Delete Ingress resources of class {{.IKSClass}}, class {{.NginxClass}}, or of no class for public or private ALBs that run the IBM Cloud Kubernetes Service Ingress image." }, { "id": "Delete a Satellite Mesh instance.", "translation": "Delete a Satellite Mesh instance." }, { "id": "Delete a Satellite connector.", "translation": "Delete a Satellite connector." }, { "id": "Delete a cluster. All worker nodes, apps, and containers are permanently deleted. This action cannot be undone.", "translation": "Delete a cluster. All worker nodes, apps, and containers are permanently deleted. This action cannot be undone." }, { "id": "Delete a dedicated host pool. This action cannot be undone.", "translation": "Delete a dedicated host pool. This action cannot be undone." }, { "id": "Delete a dedicated host. This action cannot be undone.", "translation": "Delete a dedicated host. This action cannot be undone." }, { "id": "Delete a location. Before you run this command, back up your configurations and remove any hosts and clusters that run in the location. The underlying host infrastructure is not automatically deleted when you delete a location. This action cannot be undone.", "translation": "Delete a location. Before you run this command, back up your configurations and remove any hosts and clusters that run in the location. The underlying host infrastructure is not automatically deleted when you delete a location. This action cannot be undone." }, { "id": "Delete a log forwarding configuration from a cluster.", "translation": "Delete a log forwarding configuration from a cluster." }, { "id": "Delete a logging filter.", "translation": "Delete a logging filter." }, { "id": "Delete a secret for an Ingress domain and prevent future renewal of the certificate.", "translation": "Delete a secret for an Ingress domain and prevent future renewal of the certificate." }, { "id": "Delete a secret from an NLB subdomain and prevent future renewal of the certificate.", "translation": "Delete a secret from an NLB subdomain and prevent future renewal of the certificate." }, { "id": "Delete a volume attachment from a worker node.", "translation": "Delete a volume attachment from a worker node." }, { "id": "Delete a worker node and replace it with a new worker node in the same worker pool.", "translation": "Delete a worker node and replace it with a new worker node in the same worker pool." }, { "id": "Delete all Ingress resources and ConfigMaps that were automatically generated during an Ingress migration?", "translation": "Delete all Ingress resources and ConfigMaps that were automatically generated during an Ingress migration?" }, { "id": "Delete all Ingress resources and ConfigMaps that were automatically generated during an Ingress migration? This deletes Ingress resources and ConfigMaps listed in the {{.Section}} sections in the output of {{.Command}}.", "translation": "Delete all Ingress resources and ConfigMaps that were automatically generated during an Ingress migration? This deletes Ingress resources and ConfigMaps listed in the {{.Section}} sections in the output of {{.Command}}." }, { "id": "Delete all Ingress resources of class {{.IKSClass}}, class {{.NginxClass}}, or of no class?", "translation": "Delete all Ingress resources of class {{.IKSClass}}, class {{.NginxClass}}, or of no class?" }, { "id": "Delete all Ingress resources of class {{.PublicClass}} or {{.PrivateClass}}?", "translation": "Delete all Ingress resources of class {{.PublicClass}} or {{.PrivateClass}}?" }, { "id": "Delete all Ingress resources of class {{.TestClass}}?", "translation": "Delete all Ingress resources of class {{.TestClass}}?" }, { "id": "Delete all log forwarding filters.", "translation": "Delete all log forwarding filters." }, { "id": "Delete all resources that were automatically generated during an Ingress migration, including the Ingress resources and ConfigMaps listed in the {{.Section}} sections in the output of {{.Command}}.", "translation": "Delete all resources that were automatically generated during an Ingress migration, including the Ingress resources and ConfigMaps listed in the {{.Section}} sections in the output of {{.Command}}." }, { "id": "Delete an ACL.", "translation": "Delete an ACL." }, { "id": "Delete an endpoint.", "translation": "Delete an endpoint." }, { "id": "Delete automatically generated and manually created Ingress resources of class {{.PublicClass}} or {{.PrivateClass}} for public or private ALBs that run the Kubernetes Ingress image.", "translation": "Delete automatically generated and manually created Ingress resources of class {{.PublicClass}} or {{.PrivateClass}} for public or private ALBs that run the Kubernetes Ingress image." }, { "id": "Delete automatically generated and manually created Ingress resources of class {{.TestClass}} for the test ALB service running the Kubernetes Ingress image.", "translation": "Delete automatically generated and manually created Ingress resources of class {{.TestClass}} for the test ALB service running the Kubernetes Ingress image." }, { "id": "Delete dedicated host pool {{.Pool}}?", "translation": "Delete dedicated host pool {{.Pool}}?" }, { "id": "Delete dedicated host {{.Host}} from pool {{.Pool}}?", "translation": "Delete dedicated host {{.Host}} from pool {{.Pool}}?" }, { "id": "Delete endpoint {{.Endpoint}} from connector {{.Parent}}?", "translation": "Delete endpoint {{.Endpoint}} from connector {{.Parent}}?" }, { "id": "Delete endpoint {{.Endpoint}} from location {{.Parent}}?", "translation": "Delete endpoint {{.Endpoint}} from location {{.Parent}}?" }, { "id": "Delete mesh instance with ID {{.ID}} and name {{.Name}}? This action cannot be undone.", "translation": "Delete mesh instance with ID {{.ID}} and name {{.Name}}? This action cannot be undone." }, { "id": "Delete the autoscaling configuration for Ingress ALBs.", "translation": "Delete the autoscaling configuration for Ingress ALBs." }, { "id": "Delete the configuration and all its configuration versions. Are you sure you want to delete configuration {{.Configuration}}?", "translation": "Delete the configuration and all its configuration versions. Are you sure you want to delete configuration {{.Configuration}}?" }, { "id": "Delete the configuration version. Are you sure you want to delete configuration version {{.Configuration}}?", "translation": "Delete the configuration version. Are you sure you want to delete configuration version {{.Configuration}}?" }, { "id": "Delete the data, reimage, and reinstall Kubernetes with the latest patch version on a worker node in a classic cluster. This action cannot be undone.", "translation": "Delete the data, reimage, and reinstall Kubernetes with the latest patch version on a worker node in a classic cluster. This action cannot be undone." }, { "id": "Deleted resources", "translation": "Deleted resources" }, { "id": "Deletes all existing security group rules, and reapplies default rules.", "translation": "Deletes all existing security group rules, and reapplies default rules." }, { "id": "Deleting IP {{.IP}} from NLB host name {{.Host}} in cluster {{.Cluster}}...", "translation": "Deleting IP {{.IP}} from NLB host name {{.Host}} in cluster {{.Cluster}}..." }, { "id": "Deleting NLB subdomain secret...", "translation": "Deleting NLB subdomain secret..." }, { "id": "Deleting all logging configurations in cluster {{.Cluster}}...", "translation": "Deleting all logging configurations in cluster {{.Cluster}}..." }, { "id": "Deleting all of the logging filters for cluster {{.Cluster}}...", "translation": "Deleting all of the logging filters for cluster {{.Cluster}}..." }, { "id": "Deleting dedicated host pool with ID {{.ID}}. This action cannot be undone.", "translation": "Deleting dedicated host pool with ID {{.ID}}. This action cannot be undone." }, { "id": "Deleting dedicated host with ID {{.ID}} in host pool {{.Pool}}. This action cannot be undone.", "translation": "Deleting dedicated host with ID {{.ID}} in host pool {{.Pool}}. This action cannot be undone." }, { "id": "Deleting logging configuration {{.ConfigID}} in cluster {{.Cluster}}...", "translation": "Deleting logging configuration {{.ConfigID}} in cluster {{.Cluster}}..." }, { "id": "Deleting mesh instance with ID {{.ID}} and name {{.Name}}.", "translation": "Deleting mesh instance with ID {{.ID}} and name {{.Name}}." }, { "id": "Deleting the log forwarding filter {{.ID}} for cluster {{.Cluster}}...", "translation": "Deleting the log forwarding filter {{.ID}} for cluster {{.Cluster}}..." }, { "id": "Deleting volume attachment...", "translation": "Deleting volume attachment..." }, { "id": "Deleting worker node {{.Worker}} and creating a new worker node in cluster {{.Cluster}}...", "translation": "Deleting worker node {{.Worker}} and creating a new worker node in cluster {{.Cluster}}..." }, { "id": "Deploy or update a certificate from IBM Cloud Certificate Manager to the Ingress ALB.", "translation": "Deploy or update a certificate from IBM Cloud Certificate Manager to the Ingress ALB." }, { "id": "Deploying ALB Certificate...", "translation": "Deploying ALB Certificate..." }, { "id": "Deprecated", "translation": "Deprecated" }, { "id": "Description", "translation": "Description" }, { "id": "Description of the health monitor.", "translation": "Description of the health monitor." }, { "id": "Destination", "translation": "Destination" }, { "id": "Destination Type", "translation": "Destination Type" }, { "id": "Detach an existing public or private portable subnet from a classic cluster.", "translation": "Detach an existing public or private portable subnet from a classic cluster." }, { "id": "Detach subnet {{.Subnet}} from the cluster? After the subnet is detached, it remains available in your IBM Cloud infrastructure account.", "translation": "Detach subnet {{.Subnet}} from the cluster? After the subnet is detached, it remains available in your IBM Cloud infrastructure account." }, { "id": "Details", "translation": "Details" }, { "id": "Direct Upload", "translation": "Direct Upload" }, { "id": "Directories are not supported", "translation": "Directories are not supported" }, { "id": "Disable Deployment", "translation": "Disable Deployment" }, { "id": "Disable PodSecurityPolicy for a cluster's Kubernetes API server.", "translation": "Disable PodSecurityPolicy for a cluster's Kubernetes API server." }, { "id": "Disable an ALB for the VPC cluster.", "translation": "Disable an ALB for the VPC cluster." }, { "id": "Disable an ALB for the cluster.", "translation": "Disable an ALB for the cluster." }, { "id": "Disable an Ingress ALB in a cluster.", "translation": "Disable an Ingress ALB in a cluster." }, { "id": "Disable an existing health check monitor for a NLB host name in a cluster..", "translation": "Disable an existing health check monitor for a NLB host name in a cluster.." }, { "id": "Disable automatic patches for a Satellite storage assignment.", "translation": "Disable automatic patches for a Satellite storage assignment." }, { "id": "Disable automatic patches for all Satellite storage assignments of a storage configuration.", "translation": "Disable automatic patches for all Satellite storage assignments of a storage configuration." }, { "id": "Disable automatic updates of all Fluentd pods in a cluster.", "translation": "Disable automatic updates of all Fluentd pods in a cluster." }, { "id": "Disable automatic updates of all Ingress ALB pods in a cluster.", "translation": "Disable automatic updates of all Ingress ALB pods in a cluster." }, { "id": "Disable automatic updates of the master to the latest patch version.", "translation": "Disable automatic updates of the master to the latest patch version." }, { "id": "Disable cluster add-ons.", "translation": "Disable cluster add-ons." }, { "id": "Disable cluster features.", "translation": "Disable cluster features." }, { "id": "Disable dedicated host placement.", "translation": "Disable dedicated host placement." }, { "id": "Disable encryption on a worker node.", "translation": "Disable encryption on a worker node." }, { "id": "Disable image security enforcement in your cluster.", "translation": "Disable image security enforcement in your cluster." }, { "id": "Disable outbound traffic protection for a Secure By Default VPC cluster.", "translation": "Disable outbound traffic protection for a Secure By Default VPC cluster." }, { "id": "Disable status reporting for Ingress components in a cluster.", "translation": "Disable status reporting for Ingress components in a cluster." }, { "id": "Disable the ALB deployment only. If provided, the ALB deployment is deleted but the IBM-provided Ingress subdomain remains.", "translation": "Disable the ALB deployment only. If provided, the ALB deployment is deleted but the IBM-provided Ingress subdomain remains." }, { "id": "Disable the Ingress health checker.", "translation": "Disable the Ingress health checker." }, { "id": "Disable the PROXY protocol so that client connection information is no longer passed in request headers to ALBs.", "translation": "Disable the PROXY protocol so that client connection information is no longer passed in request headers to ALBs." }, { "id": "Disable the allowlist for a Satellite cluster. When disabled, authorized requests to the cluster master from any subnet are permitted through the Satellite service endpoint.", "translation": "Disable the allowlist for a Satellite cluster. When disabled, authorized requests to the cluster master from any subnet are permitted through the Satellite service endpoint." }, { "id": "Disable the allowlist. When disabled, authorized requests to the cluster master from any subnet are permitted through the private service endpoint.", "translation": "Disable the allowlist. When disabled, authorized requests to the cluster master from any subnet are permitted through the private service endpoint." }, { "id": "Disable the private service endpoint to make the master only publicly accessible.", "translation": "Disable the private service endpoint to make the master only publicly accessible." }, { "id": "Disable the public service endpoint to make the master only privately accessible.", "translation": "Disable the public service endpoint to make the master only privately accessible." }, { "id": "Disable the public service endpoint to prevent public access to the master.", "translation": "Disable the public service endpoint to prevent public access to the master." }, { "id": "Disable the {{.Feature}} feature for cluster {{.Cluster}}?", "translation": "Disable the {{.Feature}} feature for cluster {{.Cluster}}?" }, { "id": "Disabling ALB...", "translation": "Disabling ALB..." }, { "id": "Disabling Ingress health checker for {{.Cluster}}...", "translation": "Disabling Ingress health checker for {{.Cluster}}..." }, { "id": "Disabling Kubernetes API server PodSecurityPolicy for {{.Cluster}}...", "translation": "Disabling Kubernetes API server PodSecurityPolicy for {{.Cluster}}..." }, { "id": "Disabling add-on {{.Addon}} for cluster {{.Cluster}}...", "translation": "Disabling add-on {{.Addon}} for cluster {{.Cluster}}..." }, { "id": "Disabling automatic patches for all Satellite storage assignments of a storage configuration {{.Config}}...", "translation": "Disabling automatic patches for all Satellite storage assignments of a storage configuration {{.Config}}..." }, { "id": "Disabling automatic updates of the Fluentd pods in cluster {{.Cluster}}...", "translation": "Disabling automatic updates of the Fluentd pods in cluster {{.Cluster}}..." }, { "id": "Disabling automatic updates of the application load balancer (ALB) pods in cluster {{.Cluster}}...", "translation": "Disabling automatic updates of the application load balancer (ALB) pods in cluster {{.Cluster}}..." }, { "id": "Disbling the health check monitor for NLB {{.NLB}} pods in cluster {{.Cluster}}...", "translation": "Disbling the health check monitor for NLB {{.NLB}} pods in cluster {{.Cluster}}..." }, { "id": "Display Name", "translation": "Display Name" }, { "id": "Do not show the message of the day or update reminders.", "translation": "Do not show the message of the day or update reminders." }, { "id": "Do you want to delete the persistent storage for this cluster? If yes, the data cannot be recovered. If no, you can delete the persistent storage later in your IBM Cloud infrastructure account.", "translation": "Do you want to delete the persistent storage for this cluster? If yes, the data cannot be recovered. If no, you can delete the persistent storage later in your IBM Cloud infrastructure account." }, { "id": "Domain", "translation": "Domain" }, { "id": "Domain Name", "translation": "Domain Name" }, { "id": "Download and save a Kubernetes resource definition to a temporary file.", "translation": "Download and save a Kubernetes resource definition to a temporary file." }, { "id": "Download and save the configuration version to a temporary file.", "translation": "Download and save the configuration version to a temporary file." }, { "id": "Download the Kubernetes configuration files and certificates to connect to your cluster by using kubectl commands.", "translation": "Download the Kubernetes configuration files and certificates to connect to your cluster by using kubectl commands." }, { "id": "Downloading agent setup tools for {{.Platform}}...", "translation": "Downloading agent setup tools for {{.Platform}}..." }, { "id": "During the operation, potentially disruptive changes might occur. Continue?", "translation": "During the operation, potentially disruptive changes might occur. Continue?" }, { "id": "During the update, potentially disruptive changes might occur. For more information, see {{.URL}}. Continue?", "translation": "During the update, potentially disruptive changes might occur. For more information, see {{.URL}}. Continue?" }, { "id": "During the update, you cannot access or change the cluster. Worker nodes, apps, and resources that have been deployed by the user are not modified and will continue to run.\nYou might need to change your YAML files for future deployments. Review the docs for details: {{.ClusterReleaseNotesURL}}.\nAre you sure you want to update your Kubernetes API server {{.ClusterID}} to {{.KubeVersion}}?", "translation": "During the update, you cannot access or change the cluster. Worker nodes, apps, and resources that have been deployed by the user are not modified and will continue to run.\nYou might need to change your YAML files for future deployments. Review the docs for details: {{.ClusterReleaseNotesURL}}.\nAre you sure you want to update your Kubernetes API server {{.ClusterID}} to {{.KubeVersion}}?" }, { "id": "Either a namespace or ID is required.", "translation": "Either a namespace or ID is required." }, { "id": "Either provide configuration uuid and version uuid or provide configuration name and version name", "translation": "Either provide configuration uuid and version uuid or provide configuration name and version name" }, { "id": "Email", "translation": "Email" }, { "id": "Enable Key Protect as a key management service (KMS) in your cluster to encrypt your secrets.", "translation": "Enable Key Protect as a key management service (KMS) in your cluster to encrypt your secrets." }, { "id": "Enable PodSecurityPolicy for a cluster's Kubernetes API server.", "translation": "Enable PodSecurityPolicy for a cluster's Kubernetes API server." }, { "id": "Enable Red Hat CoreOS features for the Satellite location. This action cannot be undone. See {{.URL}}.", "translation": "Enable Red Hat CoreOS features for the Satellite location. This action cannot be undone. See {{.URL}}." }, { "id": "Enable a health check monitor for an NLB host name in a cluster. Note: You must first configure the monitor with '{{.Command}}'.", "translation": "Enable a health check monitor for an NLB host name in a cluster. Note: You must first configure the monitor with '{{.Command}}'." }, { "id": "Enable a key management service (KMS) in your cluster to encrypt your secrets.", "translation": "Enable a key management service (KMS) in your cluster to encrypt your secrets." }, { "id": "Enable access control to a cluster master via a private service endpoint allowlist. For more info, see {{.URL}}.", "translation": "Enable access control to a cluster master via a private service endpoint allowlist. For more info, see {{.URL}}." }, { "id": "Enable all add-on dependencies.", "translation": "Enable all add-on dependencies." }, { "id": "Enable an ALB for the VPC cluster.", "translation": "Enable an ALB for the VPC cluster." }, { "id": "Enable an ALB for the cluster.", "translation": "Enable an ALB for the cluster." }, { "id": "Enable an Ingress ALB in a VPC Gen 1 cluster.", "translation": "Enable an Ingress ALB in a VPC Gen 1 cluster." }, { "id": "Enable an Ingress ALB in a VPC Gen 2 cluster.", "translation": "Enable an Ingress ALB in a VPC Gen 2 cluster." }, { "id": "Enable an Ingress ALB in a classic cluster.", "translation": "Enable an Ingress ALB in a classic cluster." }, { "id": "Enable an Ingress ALB in a cluster.", "translation": "Enable an Ingress ALB in a cluster." }, { "id": "Enable and disable cluster features.", "translation": "Enable and disable cluster features." }, { "id": "Enable automatic patches for a Satellite storage assignment.", "translation": "Enable automatic patches for a Satellite storage assignment." }, { "id": "Enable automatic patches for all Satellite storage assignments of a storage configuration.", "translation": "Enable automatic patches for all Satellite storage assignments of a storage configuration." }, { "id": "Enable automatic updates of all Fluentd pods in a cluster.", "translation": "Enable automatic updates of all Fluentd pods in a cluster." }, { "id": "Enable automatic updates of all Ingress ALB pods in a cluster.", "translation": "Enable automatic updates of all Ingress ALB pods in a cluster." }, { "id": "Enable automatic updates of the master to the latest patch version.", "translation": "Enable automatic updates of the master to the latest patch version." }, { "id": "Enable cluster add-ons.", "translation": "Enable cluster add-ons." }, { "id": "Enable cluster features.", "translation": "Enable cluster features." }, { "id": "Enable dedicated host placement.", "translation": "Enable dedicated host placement." }, { "id": "Enable image security enforcement in your cluster.", "translation": "Enable image security enforcement in your cluster." }, { "id": "Enable or disable an Ingress ALB in a VPC Gen 1 cluster.", "translation": "Enable or disable an Ingress ALB in a VPC Gen 1 cluster." }, { "id": "Enable or disable an Ingress ALB in a VPC Gen 2 cluster.", "translation": "Enable or disable an Ingress ALB in a VPC Gen 2 cluster." }, { "id": "Enable or disable an Ingress ALB in a classic cluster.", "translation": "Enable or disable an Ingress ALB in a classic cluster." }, { "id": "Enable or disable an Ingress ALB in a cluster.", "translation": "Enable or disable an Ingress ALB in a cluster." }, { "id": "Enable or disable dedicated host placement.", "translation": "Enable or disable dedicated host placement." }, { "id": "Enable outbound traffic protection for a Secure By Default VPC cluster.", "translation": "Enable outbound traffic protection for a Secure By Default VPC cluster." }, { "id": "Enable status reporting for Ingress components in a cluster.", "translation": "Enable status reporting for Ingress components in a cluster." }, { "id": "Enable the Ingress health checker.", "translation": "Enable the Ingress health checker." }, { "id": "Enable the PROXY protocol so that client connection information is passed in request headers to ALBs.", "translation": "Enable the PROXY protocol so that client connection information is passed in request headers to ALBs." }, { "id": "Enable the allowlist for a Satellite cluster. When enabled, only authorized requests to the cluster master from subnets in the allowlist are permitted through the Satellite service endpoint.", "translation": "Enable the allowlist for a Satellite cluster. When enabled, only authorized requests to the cluster master from subnets in the allowlist are permitted through the Satellite service endpoint." }, { "id": "Enable the allowlist. When enabled, only authorized requests to the cluster master from subnets in the allowlist are permitted through the private service endpoint.", "translation": "Enable the allowlist. When enabled, only authorized requests to the cluster master from subnets in the allowlist are permitted through the private service endpoint." }, { "id": "Enable the health check monitor for the host name.", "translation": "Enable the health check monitor for the host name." }, { "id": "Enable the private service endpoint to make the master privately accessible.", "translation": "Enable the private service endpoint to make the master privately accessible." }, { "id": "Enable the public service endpoint to make the master publicly accessible.", "translation": "Enable the public service endpoint to make the master publicly accessible." }, { "id": "Enable the {{.Feature}} feature for cluster {{.Cluster}}?", "translation": "Enable the {{.Feature}} feature for cluster {{.Cluster}}?" }, { "id": "Enabled", "translation": "Enabled" }, { "id": "Enabling ALB...", "translation": "Enabling ALB..." }, { "id": "Enabling Ingress health checker for {{.Cluster}}...", "translation": "Enabling Ingress health checker for {{.Cluster}}..." }, { "id": "Enabling Kubernetes API server PodSecurityPolicy for {{.Cluster}}...", "translation": "Enabling Kubernetes API server PodSecurityPolicy for {{.Cluster}}..." }, { "id": "Enabling add-on {{.Addon}} for cluster {{.Cluster}}...", "translation": "Enabling add-on {{.Addon}} for cluster {{.Cluster}}..." }, { "id": "Enabling add-on {{.Addon}}({{.Version}}) for cluster {{.Cluster}}...", "translation": "Enabling add-on {{.Addon}}({{.Version}}) for cluster {{.Cluster}}..." }, { "id": "Enabling automatic patches for all Satellite storage assignments of a storage configuration {{.Config}}...", "translation": "Enabling automatic patches for all Satellite storage assignments of a storage configuration {{.Config}}..." }, { "id": "Enabling automatic updates of the Fluentd pods in cluster {{.Cluster}}...", "translation": "Enabling automatic updates of the Fluentd pods in cluster {{.Cluster}}..." }, { "id": "Enabling automatic updates of the application load balancer (ALB) pods in cluster {{.Cluster}}...", "translation": "Enabling automatic updates of the application load balancer (ALB) pods in cluster {{.Cluster}}..." }, { "id": "Enabling image security enforcement could prevent some pods from starting due to the image policies that are applied by default. Are you sure you want to enable this feature?", "translation": "Enabling image security enforcement could prevent some pods from starting due to the image policies that are applied by default. Are you sure you want to enable this feature?" }, { "id": "Enabling the health check monitor for NLB {{.NLB}} pods in cluster {{.Cluster}}...", "translation": "Enabling the health check monitor for NLB {{.NLB}} pods in cluster {{.Cluster}}..." }, { "id": "Encryption", "translation": "Encryption" }, { "id": "End of Service Date:", "translation": "End of Service Date:" }, { "id": "Endpoint authentication certificates rotated.", "translation": "Endpoint authentication certificates rotated." }, { "id": "Endpoint authentication settings updated.", "translation": "Endpoint authentication settings updated." }, { "id": "Endpoint created with ID {{.ID}}", "translation": "Endpoint created with ID {{.ID}}" }, { "id": "Endpoint deleted.", "translation": "Endpoint deleted." }, { "id": "Endpoint updated.", "translation": "Endpoint updated." }, { "id": "Enter '{{.CmdHelp}}' for more information about a command.", "translation": "Enter '{{.CmdHelp}}' for more information about a command." }, { "id": "Enter a description for the Satellite location.", "translation": "Enter a description for the Satellite location." }, { "id": "Enter a name for the cluster.", "translation": "Enter a name for the cluster." }, { "id": "Enter a name for the subscription.", "translation": "Enter a name for the subscription." }, { "id": "Enter a name for the worker pool.", "translation": "Enter a name for the worker pool." }, { "id": "Enter any labels as key-value pairs to identify the host to assign to your Satellite control plane or Red Hat OpenShift cluster. The first host that has this label and is unassigned is automatically assigned to the control plane or cluster. To find available host labels, run 'ibmcloud sat host get --host --location '.", "translation": "Enter any labels as key-value pairs to identify the host to assign to your Satellite control plane or Red Hat OpenShift cluster. The first host that has this label and is unassigned is automatically assigned to the control plane or cluster. To find available host labels, run 'ibmcloud sat host get --host --location '." }, { "id": "Enter the ID or name of the location for the storage configuration. To find available locations, run 'ibmcloud sat location ls'.", "translation": "Enter the ID or name of the location for the storage configuration. To find available locations, run 'ibmcloud sat location ls'." }, { "id": "Enter the name or ID of a Satellite subscription. To find subscriptions, run 'ibmcloud sat subscription ls'.", "translation": "Enter the name or ID of a Satellite subscription. To find subscriptions, run 'ibmcloud sat subscription ls'." }, { "id": "Error generating differences output for file", "translation": "Error generating differences output for file" }, { "id": "Error merging new kubeconfig into the current kubeconfig file:", "translation": "Error merging new kubeconfig into the current kubeconfig file:" }, { "id": "Error reading file", "translation": "Error reading file" }, { "id": "Error response from server. Status code: {{.Status}}", "translation": "Error response from server. Status code: {{.Status}}" }, { "id": "Error response from server: {{.Error}}", "translation": "Error response from server: {{.Error}}" }, { "id": "Error writing updated file", "translation": "Error writing updated file" }, { "id": "Error: ", "translation": "Error: " }, { "id": "Expected Body", "translation": "Expected Body" }, { "id": "Expected Codes", "translation": "Expected Codes" }, { "id": "Experiment with new commands. IMPORTANT: Commands here will retire after the [date] in their description.", "translation": "Experiment with new commands. IMPORTANT: Commands here will retire after the [date] in their description." }, { "id": "Experimental", "translation": "Experimental" }, { "id": "Expires At", "translation": "Expires At" }, { "id": "Expires On", "translation": "Expires On" }, { "id": "Extend the command output to show more fix information for vulnerable packages.", "translation": "Extend the command output to show more fix information for vulnerable packages." }, { "id": "Extra components for Istio, including Grafana, Jaeger, and Kiali.", "translation": "Extra components for Istio, including Grafana, Jaeger, and Kiali." }, { "id": "Failed handleDefaultVersions: ", "translation": "Failed handleDefaultVersions: " }, { "id": "Failed to collect Kubernetes and OpenShift versions: ", "translation": "Failed to collect Kubernetes and OpenShift versions: " }, { "id": "Failed to convert to kube string: ", "translation": "Failed to convert to kube string: " }, { "id": "Failed to generate Kubernetes default information: ", "translation": "Failed to generate Kubernetes default information: " }, { "id": "Failed to generate OpenShift default information: ", "translation": "Failed to generate OpenShift default information: " }, { "id": "Failed to open the specified custom metrics file. Error: {{ .err }}", "translation": "Failed to open the specified custom metrics file. Error: {{ .err }}" }, { "id": "Failed to parse the specified custom metrics file. See https://ibm.biz/iks-ingress-custom-metrics for more details. Error: {{ .err }}", "translation": "Failed to parse the specified custom metrics file. See https://ibm.biz/iks-ingress-custom-metrics for more details. Error: {{ .err }}" }, { "id": "Failed to read configuration from {{.File}}", "translation": "Failed to read configuration from {{.File}}" }, { "id": "Failed to verify TLS certs: {{.Error}}", "translation": "Failed to verify TLS certs: {{.Error}}" }, { "id": "File type not supported", "translation": "File type not supported" }, { "id": "Filter out logs that are forwarded by your logging configuration.", "translation": "Filter out logs that are forwarded by your logging configuration." }, { "id": "Filter registered clusters by cluster ID.", "translation": "Filter registered clusters by cluster ID." }, { "id": "Filter the list for a specific infrastructure provider.", "translation": "Filter the list for a specific infrastructure provider." }, { "id": "Filters out any logs that contain a specified message anywhere in the log. The message is matched literally and not as an expression. Example: The messages \"Hello\", \"!\", and \"Hello, World!\", would apply to the log \"Hello, World!\".", "translation": "Filters out any logs that contain a specified message anywhere in the log. The message is matched literally and not as an expression. Example: The messages \"Hello\", \"!\", and \"Hello, World!\", would apply to the log \"Hello, World!\"." }, { "id": "Filters out any logs that contain a specified message regex pattern in the log. The message is matched as a regular expression. Example: The pattern \"hello [0-9]\" would apply to \"hello 1\", \"hello 2\", \"hello 9\"", "translation": "Filters out any logs that contain a specified message regex pattern in the log. The message is matched as a regular expression. Example: The pattern \"hello [0-9]\" would apply to \"hello 1\", \"hello 2\", \"hello 9\"" }, { "id": "Filters out logs that are at the specified level and less. Acceptable values in their canonical order are fatal, error, warn/warning, info, debug, and trace. As an example, if you filtered logs at the info level, debug, and trace are also filtered. **Note**: You can use this flag only when log messages are in JSON format and contain a level field. Example output: {\"log\": \"hello\", \"level\": \"info\"}", "translation": "Filters out logs that are at the specified level and less. Acceptable values in their canonical order are fatal, error, warn/warning, info, debug, and trace. As an example, if you filtered logs at the info level, debug, and trace are also filtered. **Note**: You can use this flag only when log messages are in JSON format and contain a level field. Example output: {\"log\": \"hello\", \"level\": \"info\"}" }, { "id": "Flag '{{.Flag}}' is required to list VLANs.", "translation": "Flag '{{.Flag}}' is required to list VLANs." }, { "id": "Flag maintained for compatibility with an earlier version. Use the '{{.Flag}}' flag instead.", "translation": "Flag maintained for compatibility with an earlier version. Use the '{{.Flag}}' flag instead." }, { "id": "Flavor", "translation": "Flavor" }, { "id": "Flavor Class", "translation": "Flavor Class" }, { "id": "Flavors", "translation": "Flavors" }, { "id": "Fluentd is at the latest version in cluster {{.Cluster}}", "translation": "Fluentd is at the latest version in cluster {{.Cluster}}" }, { "id": "Fluentd is not at the latest version in cluster {{.Cluster}}", "translation": "Fluentd is not at the latest version in cluster {{.Cluster}}" }, { "id": "Follow Redirects", "translation": "Follow Redirects" }, { "id": "Follow the documentation at {{.NotificationForUser}} to set up a {{.Platform}} agent.", "translation": "Follow the documentation at {{.NotificationForUser}} to set up a {{.Platform}} agent." }, { "id": "For VPC clusters. The hostname to register for the domain.", "translation": "For VPC clusters. The hostname to register for the domain." }, { "id": "For more details, include the '--{{.Flag}}' flag for the '{{.Command}}' command.", "translation": "For more details, include the '--{{.Flag}}' flag for the '{{.Command}}' command." }, { "id": "For more information about these flavors, see {{.URL}}", "translation": "For more information about these flavors, see {{.URL}}" }, { "id": "For more information, see", "translation": "For more information, see" }, { "id": "Force a hard restart of a worker node by cutting off power to the worker node. Use this option if the worker node is unresponsive or the worker node has a Docker hang.", "translation": "Force a hard restart of a worker node by cutting off power to the worker node. Use this option if the worker node is unresponsive or the worker node has a Docker hang." }, { "id": "Force a one-time update of the pods for individual or all ALBs in the cluster.", "translation": "Force a one-time update of the pods for individual or all ALBs in the cluster." }, { "id": "Force an update of the Fluentd pods in the cluster to the latest version.", "translation": "Force an update of the Fluentd pods in the cluster to the latest version." }, { "id": "Force the command to run without user prompts.", "translation": "Force the command to run without user prompts." }, { "id": "Force the command to run without user prompts. The cluster's persistent storage is not be deleted unless the '{{.DeleteStorage}}' flag is also provided.", "translation": "Force the command to run without user prompts. The cluster's persistent storage is not be deleted unless the '{{.DeleteStorage}}' flag is also provided." }, { "id": "Force the removal of the cluster's persistent storage without prompts regarding storage deletion. Deleted data cannot be recovered.", "translation": "Force the removal of the cluster's persistent storage without prompts regarding storage deletion. Deleted data cannot be recovered." }, { "id": "Format output in YAML.", "translation": "Format output in YAML." }, { "id": "Forward logs from your cluster.", "translation": "Forward logs from your cluster." }, { "id": "Found {{.Count}} history entries for Kubernetes resource {{.Resource}}.}", "translation": "Found {{.Count}} history entries for Kubernetes resource {{.Resource}}.}" }, { "id": "GPUs", "translation": "GPUs" }, { "id": "Gateway", "translation": "Gateway" }, { "id": "Generate a new image pull secret that stores IAM credentials for the cluster to access images in IBM Cloud Container Registry.", "translation": "Generate a new image pull secret that stores IAM credentials for the cluster to access images in IBM Cloud Container Registry." }, { "id": "Generate a new key for use by managed clusters to connect to Satellite Config.", "translation": "Generate a new key for use by managed clusters to connect to Satellite Config." }, { "id": "Geography", "translation": "Geography" }, { "id": "Get a 'kubectl' command to register your cluster in a Satellite configuration. Log in to your cluster and run this command to install a Satellite Config agent. Clusters that you run in your Satellite location automatically install this agent.", "translation": "Get a 'kubectl' command to register your cluster in a Satellite configuration. Log in to your cluster and run this command to install a Satellite Config agent. Clusters that you run in your Satellite location automatically install this agent." }, { "id": "Get a Satellite Connector agent for a specific platform.", "translation": "Get a Satellite Connector agent for a specific platform." }, { "id": "Get a Satellite cluster's service endpoint allowlist.", "translation": "Get a Satellite cluster's service endpoint allowlist." }, { "id": "Get a cluster's private service endpoint allowlist.", "translation": "Get a cluster's private service endpoint allowlist." }, { "id": "Get detailed information for a Satellite cluster group.", "translation": "Get detailed information for a Satellite cluster group." }, { "id": "Get detailed information for a Satellite subscription.", "translation": "Get detailed information for a Satellite subscription." }, { "id": "Get details for a Satellite configuration version.", "translation": "Get details for a Satellite configuration version." }, { "id": "Get details of a Satellite configuration, such as the versions or subscriptions that are associated with the configuration.", "translation": "Get details of a Satellite configuration, such as the versions or subscriptions that are associated with the configuration." }, { "id": "Get history for a Kubernetes resource.", "translation": "Get history for a Kubernetes resource." }, { "id": "Get information about VPCs and manage VPC clusters.", "translation": "Get information about VPCs and manage VPC clusters." }, { "id": "Get the OpenShift web console and OAuth server access type.", "translation": "Get the OpenShift web console and OAuth server access type." }, { "id": "Get the configuration of load balancers that expose Ingress ALBs in your cluster.", "translation": "Get the configuration of load balancers that expose Ingress ALBs in your cluster." }, { "id": "Get the details of a Satellite storage assignment.", "translation": "Get the details of a Satellite storage assignment." }, { "id": "Get the details of a Satellite storage class.", "translation": "Get the details of a Satellite storage class." }, { "id": "Get the details of a Satellite storage configuration.", "translation": "Get the details of a Satellite storage configuration." }, { "id": "Get the details of a Satellite storage template", "translation": "Get the details of a Satellite storage template" }, { "id": "Get the details of a dedicated host pool.", "translation": "Get the details of a dedicated host pool." }, { "id": "Get the details of a dedicated host.", "translation": "Get the details of a dedicated host." }, { "id": "Get the details of a registered cluster.", "translation": "Get the details of a registered cluster." }, { "id": "Get the details of a volume attachment in a cluster.", "translation": "Get the details of a volume attachment in a cluster." }, { "id": "Get the details of a volume.", "translation": "Get the details of a volume." }, { "id": "Get the information of a flavor for a zone and provider.", "translation": "Get the information of a flavor for a zone and provider." }, { "id": "Get the status of a Satellite Mesh instance.", "translation": "Get the status of a Satellite Mesh instance." }, { "id": "Get the status of the Ingress resources for a cluster.", "translation": "Get the status of the Ingress resources for a cluster." }, { "id": "Get the status of the migration process.", "translation": "Get the status of the migration process." }, { "id": "Get the status report for Ingress components in a cluster.", "translation": "Get the status report for Ingress components in a cluster." }, { "id": "Getting Kubernetes API server PodSecurity config for {{.Cluster}}...", "translation": "Getting Kubernetes API server PodSecurity config for {{.Cluster}}..." }, { "id": "Getting Kubernetes API server PodSecurityPolicy config for {{.Cluster}}...", "translation": "Getting Kubernetes API server PodSecurityPolicy config for {{.Cluster}}..." }, { "id": "Getting Kubernetes API server audit webhook config for {{.Cluster}}...", "translation": "Getting Kubernetes API server audit webhook config for {{.Cluster}}..." }, { "id": "Getting OpenShift web console and OAuth server access type for {{.Cluster}}...", "translation": "Getting OpenShift web console and OAuth server access type for {{.Cluster}}..." }, { "id": "Getting Satellite storage configuration details...", "translation": "Getting Satellite storage configuration details..." }, { "id": "Getting Satellite storage template details...", "translation": "Getting Satellite storage template details..." }, { "id": "Getting VPCs under account {{.Account}} as user {{.User}}...", "translation": "Getting VPCs under account {{.Account}} as user {{.User}}..." }, { "id": "Getting credentials for region {{.Region}}...", "translation": "Getting credentials for region {{.Region}}..." }, { "id": "Getting flavor related information. Flavors determine how much virtual CPU, memory, and disk space is available to each worker node.", "translation": "Getting flavor related information. Flavors determine how much virtual CPU, memory, and disk space is available to each worker node." }, { "id": "Getting information about the API key owner for cluster {{.Cluster}}...", "translation": "Getting information about the API key owner for cluster {{.Cluster}}..." }, { "id": "Getting quota...", "translation": "Getting quota..." }, { "id": "Getting storage class details...", "translation": "Getting storage class details..." }, { "id": "Getting volume attachment details...", "translation": "Getting volume attachment details..." }, { "id": "GitOps", "translation": "GitOps" }, { "id": "Grant cluster 'admin' access to Satellite Config to manage Kubernetes resources.", "translation": "Grant cluster 'admin' access to Satellite Config to manage Kubernetes resources." }, { "id": "Groups", "translation": "Groups" }, { "id": "H.Monitor Status", "translation": "H.Monitor Status" }, { "id": "HTTP codes that the health check looks for in the response. If the HTTP code is not found, the IP is considered unhealthy. This flag is valid only for type 'HTTP' or 'HTTPS'. Default: '2xx'", "translation": "HTTP codes that the health check looks for in the response. If the HTTP code is not found, the IP is considered unhealthy. This flag is valid only for type 'HTTP' or 'HTTPS'. Default: '2xx'" }, { "id": "HTTP request headers to send in the health check, such as a Host header. The User-Agent header cannot be overridden. This flag is valid only for type 'HTTP' or 'HTTPS'. To add more than one header to the requests, specify this flag multiple times. This flag accepts values in the following format: '--header Header-Name=value'. When updating a monitor, the existing headers are replaced by the ones you specify. To delete all existing headers specify the flag with an empty value '--header \"\"'.", "translation": "HTTP request headers to send in the health check, such as a Host header. The User-Agent header cannot be overridden. This flag is valid only for type 'HTTP' or 'HTTPS'. To add more than one header to the requests, specify this flag multiple times. This flag accepts values in the following format: '--header Header-Name=value'. When updating a monitor, the existing headers are replaced by the ones you specify. To delete all existing headers specify the flag with an empty value '--header \"\"'." }, { "id": "Hardware", "translation": "Hardware" }, { "id": "Header name and header content must not be empty.", "translation": "Header name and header content must not be empty." }, { "id": "Header timeout", "translation": "Header timeout" }, { "id": "Headers", "translation": "Headers" }, { "id": "Health", "translation": "Health" }, { "id": "Health Monitor", "translation": "Health Monitor" }, { "id": "Health Monitor Apply Properties Status", "translation": "Health Monitor Apply Properties Status" }, { "id": "Health State", "translation": "Health State" }, { "id": "Health Status", "translation": "Health Status" }, { "id": "History ID", "translation": "History ID" }, { "id": "Host", "translation": "Host" }, { "id": "Host Labels", "translation": "Host Labels" }, { "id": "Host Zones", "translation": "Host Zones" }, { "id": "Hostname", "translation": "Hostname" }, { "id": "Hosts", "translation": "Hosts" }, { "id": "Hosts (used/total)", "translation": "Hosts (used/total)" }, { "id": "Hosts Available", "translation": "Hosts Available" }, { "id": "Hosts Total", "translation": "Hosts Total" }, { "id": "IBM Cloud Ingress versions", "translation": "IBM Cloud Ingress versions" }, { "id": "IBM Cloud Ingress: 'auth' version", "translation": "IBM Cloud Ingress: 'auth' version" }, { "id": "IBM Cloud Private Endpoint URL", "translation": "IBM Cloud Private Endpoint URL" }, { "id": "ID", "translation": "ID" }, { "id": "IOPS", "translation": "IOPS" }, { "id": "IP", "translation": "IP" }, { "id": "IP Address", "translation": "IP Address" }, { "id": "IP(s)", "translation": "IP(s)" }, { "id": "IPv4 CIDR Block", "translation": "IPv4 CIDR Block" }, { "id": "Identity", "translation": "Identity" }, { "id": "If an existing credential is set, this command will overwrite the credential. To see if a credential is currently set, you can run 'ibmcloud ks ingress domain credential get'. Are you sure you want to set the credentials for domain provider {{.Provider}}?", "translation": "If an existing credential is set, this command will overwrite the credential. To see if a credential is currently set, you can run 'ibmcloud ks ingress domain credential get'. Are you sure you want to set the credentials for domain provider {{.Provider}}?" }, { "id": "If the feature requires further action, such as reloading workers or refreshing the cluster master, then perform those actions with no user prompts.", "translation": "If the feature requires further action, such as reloading workers or refreshing the cluster master, then perform those actions with no user prompts." }, { "id": "If you do not have a {{.VLANType}} yet, do not specify this option because one will be automatically created for you.", "translation": "If you do not have a {{.VLANType}} yet, do not specify this option because one will be automatically created for you." }, { "id": "If you include either '{{.A}}' or '{{.B}}', you must include both.", "translation": "If you include either '{{.A}}' or '{{.B}}', you must include both." }, { "id": "If you set up your IBM Cloud account to use different credentials to access the IBM Cloud classic infrastructure portfolio, get the infrastructure user name.", "translation": "If you set up your IBM Cloud account to use different credentials to access the IBM Cloud classic infrastructure portfolio, get the infrastructure user name." }, { "id": "Ignition Server Port", "translation": "Ignition Server Port" }, { "id": "Ignition Server URL", "translation": "Ignition Server URL" }, { "id": "Ignored Errors", "translation": "Ignored Errors" }, { "id": "Ignored Ingress Status Errors", "translation": "Ignored Ingress Status Errors" }, { "id": "Include all Kubernetes namespaces.", "translation": "Include all Kubernetes namespaces." }, { "id": "Include this flag to view the status for only one host name. To see existing host names, run '{{.Command}}'.", "translation": "Include this flag to view the status for only one host name. To see existing host names, run '{{.Command}}'." }, { "id": "Include this option to allow public outbound access from the cluster workers. By default, public outbound access is blocked in OpenShift versions 4.15 and later and Kubernetes versions 1.30 and later.", "translation": "Include this option to allow public outbound access from the cluster workers. By default, public outbound access is blocked in OpenShift versions 4.15 and later and Kubernetes versions 1.30 and later." }, { "id": "Include this option to list all storage class parameter details.", "translation": "Include this option to list all storage class parameter details." }, { "id": "Include this option to patch the assignments of the storage configuration to the latest configuration version.", "translation": "Include this option to patch the assignments of the storage configuration to the latest configuration version." }, { "id": "Include this option to remove the storage configuration as well as any associated assignments.", "translation": "Include this option to remove the storage configuration as well as any associated assignments." }, { "id": "Include this option to set the relevant domain as the default domain for cluster.", "translation": "Include this option to set the relevant domain as the default domain for cluster." }, { "id": "Incorrect Usage.", "translation": "Incorrect Usage." }, { "id": "Indicate the existing configuration version to use for the Satellite subscription. Strategy: Direct Upload.", "translation": "Indicate the existing configuration version to use for the Satellite subscription. Strategy: Direct Upload." }, { "id": "Indicate the file format of the configuration version.", "translation": "Indicate the file format of the configuration version." }, { "id": "Indicate the fully qualified domain name (FQDN) or the externally accessible IP address of the destination that you want to connect to. For 'cloud' endpoints, this value must resolve to a public IP address or to a private IP address that is accessible within IBM Cloud such as a private cloud service endpoint. For 'location' endpoints, this value must resolve from and be reachable from the control plane hosts for Satellite locations or where the agent runs for Satellite Connector.", "translation": "Indicate the fully qualified domain name (FQDN) or the externally accessible IP address of the destination that you want to connect to. For 'cloud' endpoints, this value must resolve to a public IP address or to a private IP address that is accessible within IBM Cloud such as a private cloud service endpoint. For 'location' endpoints, this value must resolve from and be reachable from the control plane hosts for Satellite locations or where the agent runs for Satellite Connector." }, { "id": "Indicate the infrastructure provider to use for the Satellite location. If you include this option, you must also include the '--provider-credential' option.", "translation": "Indicate the infrastructure provider to use for the Satellite location. If you include this option, you must also include the '--provider-credential' option." }, { "id": "Indicate the location to store the Satellite cluster data, which includes details about deployed resources such as Secrets and ConfigMaps.", "translation": "Indicate the location to store the Satellite cluster data, which includes details about deployed resources such as Secrets and ConfigMaps." }, { "id": "Indicate the name or ID of the Satellite configuration version. To list versions, run 'ibmcloud sat config get --config '.", "translation": "Indicate the name or ID of the Satellite configuration version. To list versions, run 'ibmcloud sat config get --config '." }, { "id": "Indicate the name or ID of the existing configuration version to use for the subscription. To find versions, run 'ibmcloud sat config get --config '. Strategy: Direct Upload.", "translation": "Indicate the name or ID of the existing configuration version to use for the subscription. To find versions, run 'ibmcloud sat config get --config '. Strategy: Direct Upload." }, { "id": "Indicate the path to the repository files or release assets in the remote repository to use for the Satellite subscription. Strategy: GitOps.", "translation": "Indicate the path to the repository files or release assets in the remote repository to use for the Satellite subscription. Strategy: GitOps." }, { "id": "Indicate the remote GitOps provider for the Satellite configuration. This provider stores the Kubernetes resource definitions. Strategy: GitOps. Allowed values: {{.A}}", "translation": "Indicate the remote GitOps provider for the Satellite configuration. This provider stores the Kubernetes resource definitions. Strategy: GitOps. Allowed values: {{.A}}" }, { "id": "Indicate the string to filter search results of Kubernetes resources, such as a pod or namespace name.", "translation": "Indicate the string to filter search results of Kubernetes resources, such as a pod or namespace name." }, { "id": "Indicate the type of GitRef to use for the Satellite subscription. Strategy: GitOps. Allowed values: {{.A}}", "translation": "Indicate the type of GitRef to use for the Satellite subscription. Strategy: GitOps. Allowed values: {{.A}}" }, { "id": "Indicate the type of GitRef to use for this Satellite subscription. Strategy: GitOps. Allowed values: {{.A}}", "translation": "Indicate the type of GitRef to use for this Satellite subscription. Strategy: GitOps. Allowed values: {{.A}}" }, { "id": "Indicates the default endpoint for the IBM Cloud Log Analysis service.", "translation": "Indicates the default endpoint for the IBM Cloud Log Analysis service." }, { "id": "Informational Commands", "translation": "Informational Commands" }, { "id": "Infrastructure credentials for user name {{.Email}} set for resource group {{.ResourceGroup}}.", "translation": "Infrastructure credentials for user name {{.Email}} set for resource group {{.ResourceGroup}}." }, { "id": "Infrastructure topology", "translation": "Infrastructure topology" }, { "id": "Ingress Message", "translation": "Ingress Message" }, { "id": "Ingress Secret", "translation": "Ingress Secret" }, { "id": "Ingress Status", "translation": "Ingress Status" }, { "id": "Ingress Subdomain", "translation": "Ingress Subdomain" }, { "id": "Initialize the Kubernetes Service plug-in and get authentication tokens.", "translation": "Initialize the Kubernetes Service plug-in and get authentication tokens." }, { "id": "Insecure argument present...", "translation": "Insecure argument present..." }, { "id": "Insecure endpoint requires --{{.Flag}} flag to attempt to connect, endpoint is {{.Endpoint}}.", "translation": "Insecure endpoint requires --{{.Flag}} flag to attempt to connect, endpoint is {{.Endpoint}}." }, { "id": "Insecure endpoint requires the --insecure flag. Endpoint is:", "translation": "Insecure endpoint requires the --insecure flag. Endpoint is:" }, { "id": "Instance GUID", "translation": "Instance GUID" }, { "id": "Internal only. The IBM Cloud CSUtil add-on for IBM service teams.", "translation": "Internal only. The IBM Cloud CSUtil add-on for IBM service teams." }, { "id": "Internal only. The IBM Cloud CSUtil-Experimental add-on for IBM service teams.", "translation": "Internal only. The IBM Cloud CSUtil-Experimental add-on for IBM service teams." }, { "id": "Internal server error", "translation": "Internal server error" }, { "id": "Interval", "translation": "Interval" }, { "id": "Invalid entry. Specify an option from the list.", "translation": "Invalid entry. Specify an option from the list." }, { "id": "Invalid infrastructure provider", "translation": "Invalid infrastructure provider" }, { "id": "Invalid option {{.Option}} for {{.Addon}}.", "translation": "Invalid option {{.Option}} for {{.Addon}}." }, { "id": "Invalid options for HTTPS configuration: {{.Error}}", "translation": "Invalid options for HTTPS configuration: {{.Error}}" }, { "id": "Invalid parameter format.", "translation": "Invalid parameter format." }, { "id": "Invalid {{.HeaderFlag}} format: {{.InvalidValue}}.", "translation": "Invalid {{.HeaderFlag}} format: {{.InvalidValue}}." }, { "id": "Is Default", "translation": "Is Default" }, { "id": "Issuer Name", "translation": "Issuer Name" }, { "id": "KMS", "translation": "KMS" }, { "id": "KMS Account ID", "translation": "KMS Account ID" }, { "id": "KMS instance ID. To see available KMS instances, run 'ibmcloud ks kms instance ls'.", "translation": "KMS instance ID. To see available KMS instances, run 'ibmcloud ks kms instance ls'." }, { "id": "Key", "translation": "Key" }, { "id": "Key Protect", "translation": "Key Protect" }, { "id": "Key Protect customer root key. To get the CRK, see {{.URL}}", "translation": "Key Protect customer root key. To get the CRK, see {{.URL}}" }, { "id": "Key Protect endpoint. To get the endpoint, see {{.URL}}", "translation": "Key Protect endpoint. To get the endpoint, see {{.URL}}" }, { "id": "Key Protect instance ID. To get the instance ID, run 'ibmcloud resource service-instance --id' and copy the second value (not the full CRN)", "translation": "Key Protect instance ID. To get the instance ID, run 'ibmcloud resource service-instance --id' and copy the second value (not the full CRN)" }, { "id": "Key {{.Key}} was successfully created with ID {{.ID}} and key value {{.Value}}.", "translation": "Key {{.Key}} was successfully created with ID {{.ID}} and key value {{.Value}}." }, { "id": "Key {{.OrgKey}} could not be created.", "translation": "Key {{.OrgKey}} could not be created." }, { "id": "Key {{.OrgKey}} could not be removed.", "translation": "Key {{.OrgKey}} could not be removed." }, { "id": "Key {{.OrgKey}} was successfully removed.", "translation": "Key {{.OrgKey}} was successfully removed." }, { "id": "Kind", "translation": "Kind" }, { "id": "Konnectivity Server Port", "translation": "Konnectivity Server Port" }, { "id": "Konnectivity Server URL", "translation": "Konnectivity Server URL" }, { "id": "Kubernetes Default", "translation": "Kubernetes Default" }, { "id": "Kubernetes Ingress versions", "translation": "Kubernetes Ingress versions" }, { "id": "Kubernetes defaults. For more information, see https://ibm.biz/BdPtUB.", "translation": "Kubernetes defaults. For more information, see https://ibm.biz/BdPtUB." }, { "id": "Kubernetes ingress controller ConfigMap reset", "translation": "Kubernetes ingress controller ConfigMap reset" }, { "id": "Labels", "translation": "Labels" }, { "id": "Last Modified", "translation": "Last Modified" }, { "id": "Last Updated", "translation": "Last Updated" }, { "id": "Latest Revision", "translation": "Latest Revision" }, { "id": "Level", "translation": "Level" }, { "id": "Lifecycle", "translation": "Lifecycle" }, { "id": "Limit the number of clusters that are returned.", "translation": "Limit the number of clusters that are returned." }, { "id": "List Ingress ALB image versions that are available.", "translation": "List Ingress ALB image versions that are available." }, { "id": "List Ingress ALB types that are supported in the region.", "translation": "List Ingress ALB types that are supported in the region." }, { "id": "List Satellite Mesh instances.", "translation": "List Satellite Mesh instances." }, { "id": "List all ACLs for a Satellite connector or location.", "translation": "List all ACLs for a Satellite connector or location." }, { "id": "List all Ingress ALB IDs in a cluster and whether ALB pods are at the latest version.", "translation": "List all Ingress ALB IDs in a cluster and whether ALB pods are at the latest version." }, { "id": "List all Ingress ALB certificates available in the cluster.", "translation": "List all Ingress ALB certificates available in the cluster." }, { "id": "List all Ingress domains for a cluster.", "translation": "List all Ingress domains for a cluster." }, { "id": "List all Ingress secrets in a cluster.", "translation": "List all Ingress secrets in a cluster." }, { "id": "List all Satellite Config keys in your IBM Cloud account.", "translation": "List all Satellite Config keys in your IBM Cloud account." }, { "id": "List all Satellite cluster groups in your IBM Cloud account.", "translation": "List all Satellite cluster groups in your IBM Cloud account." }, { "id": "List all Satellite configurations in your IBM Cloud account.", "translation": "List all Satellite configurations in your IBM Cloud account." }, { "id": "List all Satellite connectors in your IBM Cloud account.", "translation": "List all Satellite connectors in your IBM Cloud account." }, { "id": "List all Satellite locations in your IBM Cloud account.", "translation": "List all Satellite locations in your IBM Cloud account." }, { "id": "List all Satellite service clusters in your location to review details, such as requested host resources.", "translation": "List all Satellite service clusters in your location to review details, such as requested host resources." }, { "id": "List all Satellite subscriptions in your IBM Cloud account.", "translation": "List all Satellite subscriptions in your IBM Cloud account." }, { "id": "List all VPCs in the targeted resource group. If no resource group is targeted, all VPCs in the account are listed.", "translation": "List all VPCs in the targeted resource group. If no resource group is targeted, all VPCs in the account are listed." }, { "id": "List all availability zones in a region.", "translation": "List all availability zones in a region." }, { "id": "List all clusters in your IBM Cloud account.", "translation": "List all clusters in your IBM Cloud account." }, { "id": "List all dedicated host instances.", "translation": "List all dedicated host instances." }, { "id": "List all dedicated host pool instances.", "translation": "List all dedicated host pool instances." }, { "id": "List all enabled endpoints for an ACL.", "translation": "List all enabled endpoints for an ACL." }, { "id": "List all endpoints in a Satellite location.", "translation": "List all endpoints in a Satellite location." }, { "id": "List all hosts that are attached to a Satellite location, including hosts that are assigned to clusters or the control plane.", "translation": "List all hosts that are attached to a Satellite location, including hosts that are assigned to clusters or the control plane." }, { "id": "List all instances of the IBM Cloud Secrets Manager.", "translation": "List all instances of the IBM Cloud Secrets Manager." }, { "id": "List all quota and limits for cluster-related resources in your IBM Cloud account.", "translation": "List all quota and limits for cluster-related resources in your IBM Cloud account." }, { "id": "List all registered clusters in your IBM Cloud account.", "translation": "List all registered clusters in your IBM Cloud account." }, { "id": "List all security groups associated with a cluster.", "translation": "List all security groups associated with a cluster." }, { "id": "List all storage volume attachments of a worker in a cluster.", "translation": "List all storage volume attachments of a worker in a cluster." }, { "id": "List all the container platform versions that are available for IBM Cloud Kubernetes Service clusters.", "translation": "List all the container platform versions that are available for IBM Cloud Kubernetes Service clusters." }, { "id": "List all worker nodes in a cluster.", "translation": "List all worker nodes in a cluster." }, { "id": "List all worker pools in a cluster.", "translation": "List all worker pools in a cluster." }, { "id": "List and configure the root keys for a Key Management Service instance.", "translation": "List and configure the root keys for a Key Management Service instance." }, { "id": "List availability zones and modify the zones attached to a worker pool.", "translation": "List availability zones and modify the zones attached to a worker pool." }, { "id": "List available Key Management Service instances.", "translation": "List available Key Management Service instances." }, { "id": "List available Satellite Mesh versions.", "translation": "List available Satellite Mesh versions." }, { "id": "List available flavors for a zone.", "translation": "List available flavors for a zone." }, { "id": "List available portable subnets in your IBM Cloud infrastructure account.", "translation": "List available portable subnets in your IBM Cloud infrastructure account." }, { "id": "List available public and private VLANs for a zone.", "translation": "List available public and private VLANs for a zone." }, { "id": "List available root keys for a Key Management Service instance.", "translation": "List available root keys for a Key Management Service instance." }, { "id": "List enabled add-ons.", "translation": "List enabled add-ons." }, { "id": "List only Satellite connectors in the specified IBM Cloud region.", "translation": "List only Satellite connectors in the specified IBM Cloud region." }, { "id": "List public and private VLANs for a zone and view the VLAN spanning status.", "translation": "List public and private VLANs for a zone and view the VLAN spanning status." }, { "id": "List services bound to a Kubernetes namespace.", "translation": "List services bound to a Kubernetes namespace." }, { "id": "List supported IBM Cloud Kubernetes Service locations.", "translation": "List supported IBM Cloud Kubernetes Service locations." }, { "id": "List supported versions for managed add-ons.", "translation": "List supported versions for managed add-ons." }, { "id": "List supported versions for managed add-ons. To enable add-ons, use the 'ibmcloud ks cluster addon enable ' command.", "translation": "List supported versions for managed add-ons. To enable add-ons, use the 'ibmcloud ks cluster addon enable ' command." }, { "id": "List the Satellite storage assignments in your IBM Cloud account.", "translation": "List the Satellite storage assignments in your IBM Cloud account." }, { "id": "List the Satellite storage configurations in your IBM Cloud account.", "translation": "List the Satellite storage configurations in your IBM Cloud account." }, { "id": "List the available Satellite storage templates.", "translation": "List the available Satellite storage templates." }, { "id": "List the details of a worker pool.", "translation": "List the details of a worker pool." }, { "id": "List the details of volumes.", "translation": "List the details of volumes." }, { "id": "List the health check monitor settings for each NLB host name in a cluster.", "translation": "List the health check monitor settings for each NLB host name in a cluster." }, { "id": "List the health check status for the IPs behind NLB host names in a cluster.", "translation": "List the health check status for the IPs behind NLB host names in a cluster." }, { "id": "List the registered NLB host names and IP addresses in a cluster.", "translation": "List the registered NLB host names and IP addresses in a cluster." }, { "id": "List the registered subdomains in a Satellite location.", "translation": "List the registered subdomains in a Satellite location." }, { "id": "List the storage classes in a Satellite storage configuration", "translation": "List the storage classes in a Satellite storage configuration" }, { "id": "List warnings that are currently ignored by Ingress status for a cluster.", "translation": "List warnings that are currently ignored by Ingress status for a cluster." }, { "id": "Listing Satellite storage assignments...", "translation": "Listing Satellite storage assignments..." }, { "id": "Listing Satellite storage configurations...", "translation": "Listing Satellite storage configurations..." }, { "id": "Listing Satellite storage templates...", "translation": "Listing Satellite storage templates..." }, { "id": "Listing storage classes for the configuration...", "translation": "Listing storage classes for the configuration..." }, { "id": "Listing volume attachments...", "translation": "Listing volume attachments..." }, { "id": "Listing volume details...", "translation": "Listing volume details..." }, { "id": "Listing volumes...", "translation": "Listing volumes..." }, { "id": "Lists are not supported for logging config update.", "translation": "Lists are not supported for logging config update." }, { "id": "Load Balancer Hostname", "translation": "Load Balancer Hostname" }, { "id": "Location", "translation": "Location" }, { "id": "Location Endpoint URL", "translation": "Location Endpoint URL" }, { "id": "Location created with ID {{.Controller}}", "translation": "Location created with ID {{.Controller}}" }, { "id": "Log in to the IBM Cloud CLI by running 'ibmcloud login'.", "translation": "Log in to the IBM Cloud CLI by running 'ibmcloud login'." }, { "id": "Logging Configs", "translation": "Logging Configs" }, { "id": "Logging Key Set", "translation": "Logging Key Set" }, { "id": "Logging configuration not found.", "translation": "Logging configuration not found." }, { "id": "Make an existing public or private portable subnet in your IBM Cloud infrastructure account available to a classic cluster.", "translation": "Make an existing public or private portable subnet in your IBM Cloud infrastructure account available to a classic cluster." }, { "id": "Manage IBM Cloud Satellite clusters.", "translation": "Manage IBM Cloud Satellite clusters." }, { "id": "Manage Ingress ALB certificates in a cluster.", "translation": "Manage Ingress ALB certificates in a cluster." }, { "id": "Manage Ingress secrets in a cluster.", "translation": "Manage Ingress secrets in a cluster." }, { "id": "Manage Kubernetes and OpenShift clusters in IBM Cloud. Aliases include 'ibmcloud oc'.", "translation": "Manage Kubernetes and OpenShift clusters in IBM Cloud. Aliases include 'ibmcloud oc'." }, { "id": "Manage a cluster's Ingress domains.", "translation": "Manage a cluster's Ingress domains." }, { "id": "Manage a cluster's default Ingress domain.", "translation": "Manage a cluster's default Ingress domain." }, { "id": "Manage a cluster's external domain provider credentials.", "translation": "Manage a cluster's external domain provider credentials." }, { "id": "Manage automatic patch updates of the cluster master.", "translation": "Manage automatic patch updates of the cluster master." }, { "id": "Manage automatic patches for your Satellite storage assignments.", "translation": "Manage automatic patches for your Satellite storage assignments." }, { "id": "Manage automatic updates for the Ingress ALB add-on in a cluster.", "translation": "Manage automatic updates for the Ingress ALB add-on in a cluster." }, { "id": "Manage automatic updates of the Fluentd add-on in a cluster.", "translation": "Manage automatic updates of the Fluentd add-on in a cluster." }, { "id": "Manage autoscaling configuration for Ingress ALBs.", "translation": "Manage autoscaling configuration for Ingress ALBs." }, { "id": "Manage image pull secrets for the cluster to access images in IBM Cloud Container Registry.", "translation": "Manage image pull secrets for the cluster to access images in IBM Cloud Container Registry." }, { "id": "Manage image security enforcement in your cluster.", "translation": "Manage image security enforcement in your cluster." }, { "id": "Manage registered instances of the IBM Cloud Secrets Manager.", "translation": "Manage registered instances of the IBM Cloud Secrets Manager." }, { "id": "Manage the Certificate Authority (CA) certificates of a cluster.", "translation": "Manage the Certificate Authority (CA) certificates of a cluster." }, { "id": "Manage the Ingress health checker.", "translation": "Manage the Ingress health checker." }, { "id": "Manage the Satellite service endpoint allowlist for a Satellite cluster with CoreOS enabled. This allowlist applies to all traffic to the Satellite cluster master.", "translation": "Manage the Satellite service endpoint allowlist for a Satellite cluster with CoreOS enabled. This allowlist applies to all traffic to the Satellite cluster master." }, { "id": "Manage the fields of an Ingress secret.", "translation": "Manage the fields of an Ingress secret." }, { "id": "Manage the identity used to apply the Satellite subscription.", "translation": "Manage the identity used to apply the Satellite subscription." }, { "id": "Manage the private service endpoint allowlist for a non-Satellite cluster", "translation": "Manage the private service endpoint allowlist for a non-Satellite cluster" }, { "id": "Manage the private service endpoint of a cluster.", "translation": "Manage the private service endpoint of a cluster." }, { "id": "Manage the public service endpoint of a non Satellite cluster.", "translation": "Manage the public service endpoint of a non Satellite cluster." }, { "id": "Manage the public service endpoints accessability of a satellite cruiser.", "translation": "Manage the public service endpoints accessability of a satellite cruiser." }, { "id": "Manage the secret for an NLB subdomain.", "translation": "Manage the secret for an NLB subdomain." }, { "id": "Manage the secrets for an Ingress domain.", "translation": "Manage the secrets for an Ingress domain." }, { "id": "Managed By", "translation": "Managed By" }, { "id": "Managed From", "translation": "Managed From" }, { "id": "Master", "translation": "Master" }, { "id": "Master Health", "translation": "Master Health" }, { "id": "Master Location", "translation": "Master Location" }, { "id": "Master State", "translation": "Master State" }, { "id": "Master Status", "translation": "Master Status" }, { "id": "Master URL", "translation": "Master URL" }, { "id": "Max Replicas", "translation": "Max Replicas" }, { "id": "Mem Allocation", "translation": "Mem Allocation" }, { "id": "Mem Capacity", "translation": "Mem Capacity" }, { "id": "Memory", "translation": "Memory" }, { "id": "Mesh ID", "translation": "Mesh ID" }, { "id": "Mesh instance created with ID {{.ID}} and name {{.Name}}.", "translation": "Mesh instance created with ID {{.ID}} and name {{.Name}}." }, { "id": "Mesh name", "translation": "Mesh name" }, { "id": "Mesh version", "translation": "Mesh version" }, { "id": "Message", "translation": "Message" }, { "id": "Method", "translation": "Method" }, { "id": "Metro", "translation": "Metro" }, { "id": "Migrate Ingress resources in cluster {{.Cluster}} with migration type {{.MigrateType}}?", "translation": "Migrate Ingress resources in cluster {{.Cluster}} with migration type {{.MigrateType}}?" }, { "id": "Migrate your IBM Cloud Ingress configmap and resources to the Kubernetes Ingress format.", "translation": "Migrate your IBM Cloud Ingress configmap and resources to the Kubernetes Ingress format." }, { "id": "Migrated resources", "translation": "Migrated resources" }, { "id": "Migrated to", "translation": "Migrated to" }, { "id": "Migrated to:", "translation": "Migrated to:" }, { "id": "Migration type", "translation": "Migration type" }, { "id": "Min Replicas", "translation": "Min Replicas" }, { "id": "Missing Network Permissions", "translation": "Missing Network Permissions" }, { "id": "Missing Physical Worker Permissions", "translation": "Missing Physical Worker Permissions" }, { "id": "Missing Storage Permissions", "translation": "Missing Storage Permissions" }, { "id": "Missing Virtual Worker Permissions", "translation": "Missing Virtual Worker Permissions" }, { "id": "Modified", "translation": "Modified" }, { "id": "Modified On", "translation": "Modified On" }, { "id": "Modify load balancers that expose Ingress ALBs in your cluster.", "translation": "Modify load balancers that expose Ingress ALBs in your cluster." }, { "id": "Monitoring Dashboard", "translation": "Monitoring Dashboard" }, { "id": "Multiple configs for namespace {{.Namespace}} were found in cluster {{.Cluster}}. Specify an ID instead.", "translation": "Multiple configs for namespace {{.Namespace}} were found in cluster {{.Cluster}}. Specify an ID instead." }, { "id": "Must include either '--{{.Flag1}}' or '--{{.Flag2}}' in the command, but must not include more than one flag.", "translation": "Must include either '--{{.Flag1}}' or '--{{.Flag2}}' in the command, but must not include more than one flag." }, { "id": "Must include either '--{{.Flag1}}', '--{{.Flag2}}', or '--{{.Flag3}}' in the command, but must not include more than one flag.", "translation": "Must include either '--{{.Flag1}}', '--{{.Flag2}}', or '--{{.Flag3}}' in the command, but must not include more than one flag." }, { "id": "Mutable", "translation": "Mutable" }, { "id": "NAME:", "translation": "NAME:" }, { "id": "NLB Subdomain", "translation": "NLB Subdomain" }, { "id": "NLB Version", "translation": "NLB Version" }, { "id": "NLB hostname was created as {{.Subdomain}} and registered in {{.DNS}} DNS", "translation": "NLB hostname was created as {{.Subdomain}} and registered in {{.DNS}} DNS" }, { "id": "Name", "translation": "Name" }, { "id": "Namespace", "translation": "Namespace" }, { "id": "Needs more hosts?", "translation": "Needs more hosts?" }, { "id": "Network", "translation": "Network" }, { "id": "Network Config:", "translation": "Network Config:" }, { "id": "Network Speed", "translation": "Network Speed" }, { "id": "Network traffic to your cluster may temporarily be blocked while we reset your rules. Do you wish to continue?", "translation": "Network traffic to your cluster may temporarily be blocked while we reset your rules. Do you wish to continue?" }, { "id": "No Ingress resources or ConfigMaps were deleted.", "translation": "No Ingress resources or ConfigMaps were deleted." }, { "id": "No add-on installation options are available for {{.Addon}}.", "translation": "No add-on installation options are available for {{.Addon}}." }, { "id": "No changes are suggested or required.", "translation": "No changes are suggested or required." }, { "id": "No configs for namespace {{.Namespace}} were found in cluster {{.Cluster}}.", "translation": "No configs for namespace {{.Namespace}} were found in cluster {{.Cluster}}." }, { "id": "No credentials set for resource group {{.ResourceGroup}}.", "translation": "No credentials set for resource group {{.ResourceGroup}}." }, { "id": "No generated resources", "translation": "No generated resources" }, { "id": "No headers specified.", "translation": "No headers specified." }, { "id": "No help topic for {{.Command}}", "translation": "No help topic for {{.Command}}" }, { "id": "No load balancer configuration was found for cluster {{.Cluster}}.", "translation": "No load balancer configuration was found for cluster {{.Cluster}}." }, { "id": "No provider type specified.", "translation": "No provider type specified." }, { "id": "No such CIDR belonging to the specified private VLAN id is bound to this cluster. Run '{{.Command}}' and verify the CIDR and VLAN id.", "translation": "No such CIDR belonging to the specified private VLAN id is bound to this cluster. Run '{{.Command}}' and verify the CIDR and VLAN id." }, { "id": "No test subdomains", "translation": "No test subdomains" }, { "id": "No version for add-on {{.Addon}} was specified. Specify the version to update the add-on to in the '--version' flag, and try again.", "translation": "No version for add-on {{.Addon}} was specified. Specify the version to update the add-on to in the '--version' flag, and try again." }, { "id": "No warnings", "translation": "No warnings" }, { "id": "Note: It might take a few minutes for your changes to be applied.", "translation": "Note: It might take a few minutes for your changes to be applied." }, { "id": "Note: It might take up to 30 minutes for your configuration to be fully applied.", "translation": "Note: It might take up to 30 minutes for your configuration to be fully applied." }, { "id": "Note: It might take up to 5 minutes for your ALB deployment and load balancer service to be fully removed.", "translation": "Note: It might take up to 5 minutes for your ALB deployment and load balancer service to be fully removed." }, { "id": "Note: It might take up to 5 minutes for your ALB to be fully deployed.", "translation": "Note: It might take up to 5 minutes for your ALB to be fully deployed." }, { "id": "Number", "translation": "Number" }, { "id": "Number Fields", "translation": "Number Fields" }, { "id": "Number of workers was not specified. Creating cluster with {{.DefaultWorkerNum}} worker nodes.", "translation": "Number of workers was not specified. Creating cluster with {{.DefaultWorkerNum}} worker nodes." }, { "id": "Number of workers was not specified. Using default: {{.DefaultWorkerNum}}", "translation": "Number of workers was not specified. Using default: {{.DefaultWorkerNum}}" }, { "id": "OAuth Server URL", "translation": "OAuth Server URL" }, { "id": "OCP Supported", "translation": "OCP Supported" }, { "id": "OS", "translation": "OS" }, { "id": "One NLB IP address. To see NLB IPs associated with the host name, run '{{.Command}}'.", "translation": "One NLB IP address. To see NLB IPs associated with the host name, run '{{.Command}}'." }, { "id": "One of the two flags, '{{.EitherFlag}}' or '{{.OrFlag}}', must be specified. Specify only the one required and try again.", "translation": "One of the two flags, '{{.EitherFlag}}' or '{{.OrFlag}}', must be specified. Specify only the one required and try again." }, { "id": "One or more NLB IP addresses. To see load balancer IPs, run '{{.Command}}'.", "translation": "One or more NLB IP addresses. To see load balancer IPs, run '{{.Command}}'." }, { "id": "Only the {{.MessageFilter}} and {{.LevelFilter}} filters are supported when specifying {{.LogType}} log type.", "translation": "Only the {{.MessageFilter}} and {{.LevelFilter}} filters are supported when specifying {{.LogType}} log type." }, { "id": "Only version 1.0.0 is supported.", "translation": "Only version 1.0.0 is supported." }, { "id": "OpenShift Default", "translation": "OpenShift Default" }, { "id": "OpenShift web console and OAuth server access type", "translation": "OpenShift web console and OAuth server access type" }, { "id": "OpenVPN Server Port", "translation": "OpenVPN Server Port" }, { "id": "Operating System", "translation": "Operating System" }, { "id": "Operation cancelled", "translation": "Operation cancelled" }, { "id": "Option", "translation": "Option" }, { "id": "Optional. Specify one or more cluster level preview features.", "translation": "Optional. Specify one or more cluster level preview features." }, { "id": "Optional. Specify one or more security group IDs to apply to all workers on the cluster. For OpenShift version 4.15 and Kubernetes version 1.30 and later, these security groups are applied in addition to the IBM-managed 'kube-clusterID' security group. For earlier cluster versions, specify the '--cluster-security-group cluster' option to apply the 'kube-clusterID' security group. If no value is specified, a default set of security groups including 'kube-clusterID' are applied.", "translation": "Optional. Specify one or more security group IDs to apply to all workers on the cluster. For OpenShift version 4.15 and Kubernetes version 1.30 and later, these security groups are applied in addition to the IBM-managed 'kube-clusterID' security group. For earlier cluster versions, specify the '--cluster-security-group cluster' option to apply the 'kube-clusterID' security group. If no value is specified, a default set of security groups including 'kube-clusterID' are applied." }, { "id": "Optional. Specify up to five security group IDs to apply to all workers in the worker pool.", "translation": "Optional. Specify up to five security group IDs to apply to all workers in the worker pool." }, { "id": "Org", "translation": "Org" }, { "id": "Other Commands", "translation": "Other Commands" }, { "id": "Owner", "translation": "Owner" }, { "id": "PARAMETERS:", "translation": "PARAMETERS:" }, { "id": "PROXY protocol", "translation": "PROXY protocol" }, { "id": "PV", "translation": "PV" }, { "id": "PVC", "translation": "PVC" }, { "id": "Parameter Name", "translation": "Parameter Name" }, { "id": "Parameter Value", "translation": "Parameter Value" }, { "id": "Parameters", "translation": "Parameters" }, { "id": "Params set successfully for configuration {{.Config}} and assignments successfully updated to latest configuration version.", "translation": "Params set successfully for configuration {{.Config}} and assignments successfully updated to latest configuration version." }, { "id": "Params set successfully for configuration {{.Config}}.", "translation": "Params set successfully for configuration {{.Config}}." }, { "id": "Passing installation options is not valid for {{.Addon}}.", "translation": "Passing installation options is not valid for {{.Addon}}." }, { "id": "Path", "translation": "Path" }, { "id": "Path for the custom metric file. See https://ibm.biz/iks-ingress-custom-metrics for more details.", "translation": "Path for the custom metric file. See https://ibm.biz/iks-ingress-custom-metrics for more details." }, { "id": "Paths", "translation": "Paths" }, { "id": "Pending State", "translation": "Pending State" }, { "id": "Pending Version", "translation": "Pending Version" }, { "id": "Permitted values for --{{.FlagName}}: {{.ValidValues}}", "translation": "Permitted values for --{{.FlagName}}: {{.ValidValues}}" }, { "id": "Persist the secret in the cluster so that it cannot be deleted.", "translation": "Persist the secret in the cluster so that it cannot be deleted." }, { "id": "Persisted", "translation": "Persisted" }, { "id": "Physical Address", "translation": "Physical Address" }, { "id": "Placement", "translation": "Placement" }, { "id": "Pod Subnet", "translation": "Pod Subnet" }, { "id": "Pod network interface selection method", "translation": "Pod network interface selection method" }, { "id": "Pod subnet", "translation": "Pod subnet" }, { "id": "Policy", "translation": "Policy" }, { "id": "Pool ID", "translation": "Pool ID" }, { "id": "Pool Name", "translation": "Pool Name" }, { "id": "Port", "translation": "Port" }, { "id": "Pre-defined storage class parameters", "translation": "Pre-defined storage class parameters" }, { "id": "Prevent the creation of a portable subnet when creating the cluster. By default, both a public and a private portable subnet are created on the associated VLAN, and this flag prevents that behavior. To add a subnet to the cluster later, run '{{.Command}}'.", "translation": "Prevent the creation of a portable subnet when creating the cluster. By default, both a public and a private portable subnet are created on the associated VLAN, and this flag prevents that behavior. To add a subnet to the cluster later, run '{{.Command}}'." }, { "id": "Primary", "translation": "Primary" }, { "id": "Primary IP", "translation": "Primary IP" }, { "id": "Primary Storage", "translation": "Primary Storage" }, { "id": "Prints the command output in JSON format.", "translation": "Prints the command output in JSON format." }, { "id": "Prints the command output in the provided format and skips 'kubeconfig' merges.", "translation": "Prints the command output in the provided format and skips 'kubeconfig' merges." }, { "id": "Prints the command output in the provided format.", "translation": "Prints the command output in the provided format." }, { "id": "Prints the command output in the provided format. If you do not include the provider flag, only {{.classic}} clusters are returned.", "translation": "Prints the command output in the provided format. If you do not include the provider flag, only {{.classic}} clusters are returned." }, { "id": "Private IP", "translation": "Private IP" }, { "id": "Private Service Endpoint URL", "translation": "Private Service Endpoint URL" }, { "id": "Private VLAN", "translation": "Private VLAN" }, { "id": "Processing failed for {{.WorkerID}}.", "translation": "Processing failed for {{.WorkerID}}." }, { "id": "Processing on {{.WorkerID}} complete.", "translation": "Processing on {{.WorkerID}} complete." }, { "id": "Processing {{.WorkerID}}...", "translation": "Processing {{.WorkerID}}..." }, { "id": "Profile", "translation": "Profile" }, { "id": "Protocol", "translation": "Protocol" }, { "id": "Provide a file that contains input parameters in YAML format.", "translation": "Provide a file that contains input parameters in YAML format." }, { "id": "Provide a name for Satellite storage assignment.", "translation": "Provide a name for Satellite storage assignment." }, { "id": "Provide a name for the Satellite configuration version.", "translation": "Provide a name for the Satellite configuration version." }, { "id": "Provide a name for the Satellite configuration.", "translation": "Provide a name for the Satellite configuration." }, { "id": "Provide a name for the custom storage class.", "translation": "Provide a name for the custom storage class." }, { "id": "Provide a name for the endpoint.", "translation": "Provide a name for the endpoint." }, { "id": "Provide a name of the Satellite cluster group.", "translation": "Provide a name of the Satellite cluster group." }, { "id": "Provide a new name for the Satellite configuration.", "translation": "Provide a new name for the Satellite configuration." }, { "id": "Provide a new name for the Satellite storage assignment.", "translation": "Provide a new name for the Satellite storage assignment." }, { "id": "Provide a new name for the endpoint.", "translation": "Provide a new name for the endpoint." }, { "id": "Provide a new name of the Satellite subscription.", "translation": "Provide a new name of the Satellite subscription." }, { "id": "Provide a script file name to update.", "translation": "Provide a script file name to update." }, { "id": "Provide an updated value for at least one option, and try again.", "translation": "Provide an updated value for at least one option, and try again." }, { "id": "Provide both '--{{.KMSFlagName}}' and '--{{.CRKFlagName}}' flags, or omit both. You cannot provide only one of these flags.", "translation": "Provide both '--{{.KMSFlagName}}' and '--{{.CRKFlagName}}' flags, or omit both. You cannot provide only one of these flags." }, { "id": "Provide one or more certificates to rotate, and try again.", "translation": "Provide one or more certificates to rotate, and try again." }, { "id": "Provide the URL of the remote repository to use for the Satellite subscription. Strategy: GitOps.", "translation": "Provide the URL of the remote repository to use for the Satellite subscription. Strategy: GitOps." }, { "id": "Provide the authentication secret required to connect to the remote repository. See {{.DocURL}} for details. Strategy: GitOps.", "translation": "Provide the authentication secret required to connect to the remote repository. See {{.DocURL}} for details. Strategy: GitOps." }, { "id": "Provide the authentication secret required to connect to the remote repository. Strategy: GitOps.", "translation": "Provide the authentication secret required to connect to the remote repository. Strategy: GitOps." }, { "id": "Provide the name or ID of a Satellite subscription. To list subscriptions, run 'ibmcloud sat subscription ls'.", "translation": "Provide the name or ID of a Satellite subscription. To list subscriptions, run 'ibmcloud sat subscription ls'." }, { "id": "Provide the path to the repository files or release assets in the remote repository to use for the Satellite subscription. Strategy: GitOps.", "translation": "Provide the path to the repository files or release assets in the remote repository to use for the Satellite subscription. Strategy: GitOps." }, { "id": "Provide the port that the destination resource listens on for incoming requests. Make sure that the port matches the destination protocol.", "translation": "Provide the port that the destination resource listens on for incoming requests. Make sure that the port matches the destination protocol." }, { "id": "Provide the protocol that the source uses to connect the destination resource. See {{.URL}}.", "translation": "Provide the protocol that the source uses to connect the destination resource. See {{.URL}}." }, { "id": "Provider", "translation": "Provider" }, { "id": "Provider Credentials", "translation": "Provider Credentials" }, { "id": "Provider Region", "translation": "Provider Region" }, { "id": "Provider must be of type 'akamai-ext' or 'cloudflare-ext'.", "translation": "Provider must be of type 'akamai-ext' or 'cloudflare-ext'." }, { "id": "Public", "translation": "Public" }, { "id": "Public Gateway ID", "translation": "Public Gateway ID" }, { "id": "Public Gateway Name", "translation": "Public Gateway Name" }, { "id": "Public IP", "translation": "Public IP" }, { "id": "Public Service Endpoint URL", "translation": "Public Service Endpoint URL" }, { "id": "Public VLAN", "translation": "Public VLAN" }, { "id": "Pull Secrets", "translation": "Pull Secrets" }, { "id": "Quota", "translation": "Quota" }, { "id": "Ready", "translation": "Ready" }, { "id": "Ready for deployments", "translation": "Ready for deployments" }, { "id": "Reapplies default security group rules that do not exist. Does not delete any preexisting rules.", "translation": "Reapplies default security group rules that do not exist. Does not delete any preexisting rules." }, { "id": "Reason For Delete", "translation": "Reason For Delete" }, { "id": "Rebalance a worker pool in a cluster. Rebalancing adds worker nodes so that the worker pool has the same number of nodes per zone that you specified.", "translation": "Rebalance a worker pool in a cluster. Rebalancing adds worker nodes so that the worker pool has the same number of nodes per zone that you specified." }, { "id": "Rebalancing pool {{.Pool}} in cluster {{.Cluster}}...", "translation": "Rebalancing pool {{.Pool}} in cluster {{.Cluster}}..." }, { "id": "Reboot worker?", "translation": "Reboot worker?" }, { "id": "Reboot workers?", "translation": "Reboot workers?" }, { "id": "Reclaim", "translation": "Reclaim" }, { "id": "Records", "translation": "Records" }, { "id": "Refresh the API servers for cluster {{.Cluster}}?", "translation": "Refresh the API servers for cluster {{.Cluster}}?" }, { "id": "Refresh the logging configuration for a cluster.", "translation": "Refresh the logging configuration for a cluster." }, { "id": "Refreshing API server(s) for cluster {{.Cluster}}...", "translation": "Refreshing API server(s) for cluster {{.Cluster}}..." }, { "id": "Refreshing logging configuration for cluster {{.Cluster}}...", "translation": "Refreshing logging configuration for cluster {{.Cluster}}..." }, { "id": "Regenerate the certificate and secret for an NLB subdomain.", "translation": "Regenerate the certificate and secret for an NLB subdomain." }, { "id": "Regenerate the certificate for an Ingress domain.", "translation": "Regenerate the certificate for an Ingress domain." }, { "id": "Regenerating NLB subdomain certificate and secret...", "translation": "Regenerating NLB subdomain certificate and secret..." }, { "id": "Regenerating domain certificate and secret...", "translation": "Regenerating domain certificate and secret..." }, { "id": "Region", "translation": "Region" }, { "id": "Region/Zone", "translation": "Region/Zone" }, { "id": "Region:", "translation": "Region:" }, { "id": "Register a webhook in a cluster.", "translation": "Register a webhook in a cluster." }, { "id": "Register an IBM Cloud Secrets Manager instance to a cluster.", "translation": "Register an IBM Cloud Secrets Manager instance to a cluster." }, { "id": "Register and manage clusters for use with Satellite configurations.", "translation": "Register and manage clusters for use with Satellite configurations." }, { "id": "Registering a subdomain for control plane hosts...", "translation": "Registering a subdomain for control plane hosts..." }, { "id": "Reload the workers by running either 'ibmcloud ks worker reload' or 'ibmcloud ks worker update'.", "translation": "Reload the workers by running either 'ibmcloud ks worker reload' or 'ibmcloud ks worker update'." }, { "id": "Reload worker?", "translation": "Reload worker?" }, { "id": "Reload workers?", "translation": "Reload workers?" }, { "id": "Reloading workers for cluster {{.Cluster}}...", "translation": "Reloading workers for cluster {{.Cluster}}..." }, { "id": "Remove a Satellite Config key. Any cluster that still uses this key cannot connect to Satellite Config.", "translation": "Remove a Satellite Config key. Any cluster that still uses this key cannot connect to Satellite Config." }, { "id": "Remove a Satellite cluster group, which unsubscribes clusters and deletes the Kubernetes resources that were managed by the group's subscriptions.", "translation": "Remove a Satellite cluster group, which unsubscribes clusters and deletes the Kubernetes resources that were managed by the group's subscriptions." }, { "id": "Remove a Satellite configuration version.", "translation": "Remove a Satellite configuration version." }, { "id": "Remove a Satellite configuration. All associated subscriptions must be removed first. All versions are deleted. Back up any resource definitions that you want to keep.", "translation": "Remove a Satellite configuration. All associated subscriptions must be removed first. All versions are deleted. Back up any resource definitions that you want to keep." }, { "id": "Remove a Satellite storage assignment. The Kubernetes resources are deleted from all the clusters in your Satellite location, but the configuration remains.", "translation": "Remove a Satellite storage assignment. The Kubernetes resources are deleted from all the clusters in your Satellite location, but the configuration remains." }, { "id": "Remove a Satellite storage configuration.", "translation": "Remove a Satellite storage configuration." }, { "id": "Remove a Satellite subscription. The Kubernetes resources are no longer deployed to your clusters.", "translation": "Remove a Satellite subscription. The Kubernetes resources are no longer deployed to your clusters." }, { "id": "Remove a cluster registration. The cluster is no longer subscribed to a Satellite configuration, but the cluster and its existing resources still run.", "translation": "Remove a cluster registration. The cluster is no longer subscribed to a Satellite configuration, but the cluster and its existing resources still run." }, { "id": "Remove a host from a Satellite location.", "translation": "Remove a host from a Satellite location." }, { "id": "Remove a load balancer host name from an NLB host name in a VPC cluster. The NLB host name still exists but no load balancers are associated with it.", "translation": "Remove a load balancer host name from an NLB host name in a VPC cluster. The NLB host name still exists but no load balancers are associated with it." }, { "id": "Remove a load balancer host name or IP address from a DNS record in a VPC cluster.", "translation": "Remove a load balancer host name or IP address from a DNS record in a VPC cluster." }, { "id": "Remove a worker node from a cluster.", "translation": "Remove a worker node from a cluster." }, { "id": "Remove a worker pool from a cluster.", "translation": "Remove a worker pool from a cluster." }, { "id": "Remove a zone from one or more worker pools in a cluster.", "translation": "Remove a zone from one or more worker pools in a cluster." }, { "id": "Remove all Kubernetes taints from all worker nodes in a worker pool.", "translation": "Remove all Kubernetes taints from all worker nodes in a worker pool." }, { "id": "Remove all custom Kubernetes labels from all worker nodes in a worker pool.", "translation": "Remove all custom Kubernetes labels from all worker nodes in a worker pool." }, { "id": "Remove all custom labels from worker pool '{{.WorkerPool}}'?", "translation": "Remove all custom labels from worker pool '{{.WorkerPool}}'?" }, { "id": "Remove all log forwarding configurations.", "translation": "Remove all log forwarding configurations." }, { "id": "Remove all taints on worker pool {{.WorkerPool}}?", "translation": "Remove all taints on worker pool {{.WorkerPool}}?" }, { "id": "Remove an IBM Cloud service from a cluster by unbinding it from a Kubernetes namespace.", "translation": "Remove an IBM Cloud service from a cluster by unbinding it from a Kubernetes namespace." }, { "id": "Remove an Ingress ALB certificate from a cluster.", "translation": "Remove an Ingress ALB certificate from a cluster." }, { "id": "Remove an Ingress domain from a cluster.", "translation": "Remove an Ingress domain from a cluster." }, { "id": "Remove an Ingress secret from a cluster.", "translation": "Remove an Ingress secret from a cluster." }, { "id": "Remove an NLB IP address from an NLB host name. If you remove all IPs from a host name, the host name still exists but no IPs are associated with it.", "translation": "Remove an NLB IP address from an NLB host name. If you remove all IPs from a host name, the host name still exists but no IPs are associated with it." }, { "id": "Remove an NLB IP or load balancer host name from an NLB host name.", "translation": "Remove an NLB IP or load balancer host name from an NLB host name." }, { "id": "Remove an external domain provider credential from the cluster.", "translation": "Remove an external domain provider credential from the cluster." }, { "id": "Remove fields from an existing Ingress secret.", "translation": "Remove fields from an existing Ingress secret." }, { "id": "Remove host {{.Host}} from location {{.Location}}?", "translation": "Remove host {{.Host}} from location {{.Location}}?" }, { "id": "Remove one or more enabled endpoints from an ACL.", "translation": "Remove one or more enabled endpoints from an ACL." }, { "id": "Remove one or more subnets from an ACL.", "translation": "Remove one or more subnets from an ACL." }, { "id": "Remove subnets from a Satellite cluster's service endpoint allowlist.", "translation": "Remove subnets from a Satellite cluster's service endpoint allowlist." }, { "id": "Remove subnets from a cluster's private service endpoint allowlist.", "translation": "Remove subnets from a cluster's private service endpoint allowlist." }, { "id": "Remove the PodSecurity admission configuration for a cluster's Kubernetes API server.", "translation": "Remove the PodSecurity admission configuration for a cluster's Kubernetes API server." }, { "id": "Remove the audit webhook configuration for a cluster's Kubernetes API server.", "translation": "Remove the audit webhook configuration for a cluster's Kubernetes API server." }, { "id": "Remove the credentials that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account.", "translation": "Remove the credentials that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account." }, { "id": "Remove warnings that are currently ignored by Ingress status for a cluster.", "translation": "Remove warnings that are currently ignored by Ingress status for a cluster." }, { "id": "Remove worker pool {{.Pool}}?", "translation": "Remove worker pool {{.Pool}}?" }, { "id": "Remove worker?", "translation": "Remove worker?" }, { "id": "Remove workers?", "translation": "Remove workers?" }, { "id": "Remove your own portable subnet on a private VLAN from a classic cluster.", "translation": "Remove your own portable subnet on a private VLAN from a classic cluster." }, { "id": "Removed cluster group '{{.ClusterGroup}}'.", "translation": "Removed cluster group '{{.ClusterGroup}}'." }, { "id": "Removes one or more clusters from your Satellite cluster group and deletes the Kubernetes resources that were managed by the group's subscriptions.", "translation": "Removes one or more clusters from your Satellite cluster group and deletes the Kubernetes resources that were managed by the group's subscriptions." }, { "id": "Removing ALB Certificate...", "translation": "Removing ALB Certificate..." }, { "id": "Removing Kubernetes API server audit webhook config for {{.Cluster}}...", "translation": "Removing Kubernetes API server audit webhook config for {{.Cluster}}..." }, { "id": "Removing all custom labels from worker pool '{{.Pool}}' in cluster '{{.Cluster}}'...", "translation": "Removing all custom labels from worker pool '{{.Pool}}' in cluster '{{.Cluster}}'..." }, { "id": "Removing all taints for worker pool {{.Pool}} in cluster {{.Cluster}}...", "translation": "Removing all taints for worker pool {{.Pool}} in cluster {{.Cluster}}..." }, { "id": "Removing cluster {{.Cluster}}, persistent storage...", "translation": "Removing cluster {{.Cluster}}, persistent storage..." }, { "id": "Removing cluster {{.Cluster}}...", "translation": "Removing cluster {{.Cluster}}..." }, { "id": "Removing credentials for region {{.Region}}...", "translation": "Removing credentials for region {{.Region}}..." }, { "id": "Removing host from location {{.Location}}...", "translation": "Removing host from location {{.Location}}..." }, { "id": "Removing load balancer host name...", "translation": "Removing load balancer host name..." }, { "id": "Removing location {{.Controller}}...", "translation": "Removing location {{.Controller}}..." }, { "id": "Removing worker {{.WorkerID}}...", "translation": "Removing worker {{.WorkerID}}..." }, { "id": "Rename a Satellite configuration.", "translation": "Rename a Satellite configuration." }, { "id": "Replace existing authentication certificates with new ones. There are two TLS connections in the request flow. The 'source' options refer to the TLS handshake between the source and the Connector service. The 'destination' options refer to the TLS handshake between the Connector service and your destination or target server. You can provide certificates for one or both of these connections. Only the certificates that you specify are replaced.", "translation": "Replace existing authentication certificates with new ones. There are two TLS connections in the request flow. The 'source' options refer to the TLS handshake between the source and the Connector service. The 'destination' options refer to the TLS handshake between the Connector service and your destination or target server. You can provide certificates for one or both of these connections. Only the certificates that you specify are replaced." }, { "id": "Replace the API key for all clusters in the specified region and targeted resource group. For more information, see 'http://ibm.biz/api-key'.", "translation": "Replace the API key for all clusters in the specified region and targeted resource group. For more information, see 'http://ibm.biz/api-key'." }, { "id": "Replace worker node {{.Worker}}?", "translation": "Replace worker node {{.Worker}}?" }, { "id": "Replica configuration", "translation": "Replica configuration" }, { "id": "Replicas", "translation": "Replicas" }, { "id": "Requested host not found", "translation": "Requested host not found" }, { "id": "Required", "translation": "Required" }, { "id": "Required for OpenShift clusters only. The CRN for the standard cloud object storage instance to back up the internal registry in your OpenShift cluster. To list the CRNs of your cloud object storage instances, run 'ibmcloud resource service-instances --long --service-name cloud-object-storage'.", "translation": "Required for OpenShift clusters only. The CRN for the standard cloud object storage instance to back up the internal registry in your OpenShift cluster. To list the CRNs of your cloud object storage instances, run 'ibmcloud resource service-instances --long --service-name cloud-object-storage'." }, { "id": "Required for provider types '{{.VPC}}' and '{{.VPCGen2}}': The ID of the VPC to list subnets for. To list VPC IDs, run '{{.Command}}'.", "translation": "Required for provider types '{{.VPC}}' and '{{.VPCGen2}}': The ID of the VPC to list subnets for. To list VPC IDs, run '{{.Command}}'." }, { "id": "Required for provider types '{{.VPC}}' and '{{.VPCGen2}}': The zone to list VPC subnets for. To list available zones, run '{{.Command}} --provider vpc-classic|vpc-gen2'.", "translation": "Required for provider types '{{.VPC}}' and '{{.VPCGen2}}': The zone to list VPC subnets for. To list available zones, run '{{.Command}} --provider vpc-classic|vpc-gen2'." }, { "id": "Reset account API key in region {{.Region}}?", "translation": "Reset account API key in region {{.Region}}?" }, { "id": "Reset the key that the control plane uses to attach and assign hosts in the location. See https://ibm.biz/reset-key.", "translation": "Reset the key that the control plane uses to attach and assign hosts in the location. See https://ibm.biz/reset-key." }, { "id": "Reset the {{.K8sConfigMap}} ConfigMap to the default settings. The ConfigMap is deleted and re-deployed.", "translation": "Reset the {{.K8sConfigMap}} ConfigMap to the default settings. The ConfigMap is deleted and re-deployed." }, { "id": "Reset the {{.K8sConfigMap}} ConfigMap to the default settings?", "translation": "Reset the {{.K8sConfigMap}} ConfigMap to the default settings?" }, { "id": "Reset the {{.K8sConfigMap}} ConfigMap?", "translation": "Reset the {{.K8sConfigMap}} ConfigMap?" }, { "id": "Resize the worker pool to the number of workers per zone that you specify.", "translation": "Resize the worker pool to the number of workers per zone that you specify." }, { "id": "Resource", "translation": "Resource" }, { "id": "Resource Group ID", "translation": "Resource Group ID" }, { "id": "Resource Group Name", "translation": "Resource Group Name" }, { "id": "Resource ID", "translation": "Resource ID" }, { "id": "Resource data saved:", "translation": "Resource data saved:" }, { "id": "Resource kind:", "translation": "Resource kind:" }, { "id": "Resource migration warnings:", "translation": "Resource migration warnings:" }, { "id": "Resource name:", "translation": "Resource name:" }, { "id": "Resource namespace:", "translation": "Resource namespace:" }, { "id": "Resources", "translation": "Resources" }, { "id": "Restart a worker node.", "translation": "Restart a worker node." }, { "id": "Restart the cluster master nodes to apply new Kubernetes API configuration changes. Your worker nodes, apps, and resources are not modified and continue to run.", "translation": "Restart the cluster master nodes to apply new Kubernetes API configuration changes. Your worker nodes, apps, and resources are not modified and continue to run." }, { "id": "Restrict the command output to show configuration issues only.", "translation": "Restrict the command output to show configuration issues only." }, { "id": "Restrict the command output to show package vulnerabilities only.", "translation": "Restrict the command output to show package vulnerabilities only." }, { "id": "Retries", "translation": "Retries" }, { "id": "Retrieve administrator certificates and PEM keys.", "translation": "Retrieve administrator certificates and PEM keys." }, { "id": "Retrieve the Calico network config with the Admin config.", "translation": "Retrieve the Calico network config with the Admin config." }, { "id": "Retrieved suggested and required infrastructure permissions that are missing for account ID {{.AccountID}} with infrastructure access set up by {{.AccountType}}.", "translation": "Retrieved suggested and required infrastructure permissions that are missing for account ID {{.AccountID}} with infrastructure access set up by {{.AccountType}}." }, { "id": "Retrieving alb cert...", "translation": "Retrieving alb cert..." }, { "id": "Retrieving alb {{.ALBID}}...", "translation": "Retrieving alb {{.ALBID}}..." }, { "id": "Retrieving automatic update status of application load balancer (ALB) pods in cluster {{.Cluster}}...", "translation": "Retrieving automatic update status of application load balancer (ALB) pods in cluster {{.Cluster}}..." }, { "id": "Retrieving automatic update status of the Fluentd pods in cluster {{.Cluster}}...", "translation": "Retrieving automatic update status of the Fluentd pods in cluster {{.Cluster}}..." }, { "id": "Retrieving automatic update status of your cluster {{.Cluster}}...", "translation": "Retrieving automatic update status of your cluster {{.Cluster}}..." }, { "id": "Retrieving autoscaling status for {{.ALBID}}...", "translation": "Retrieving autoscaling status for {{.ALBID}}..." }, { "id": "Retrieving cluster {{.Cluster}} and all its resources...", "translation": "Retrieving cluster {{.Cluster}} and all its resources..." }, { "id": "Retrieving cluster {{.Cluster}} logging configurations...", "translation": "Retrieving cluster {{.Cluster}} logging configurations..." }, { "id": "Retrieving cluster {{.Cluster}} {{.LogSource}} logging configurations...", "translation": "Retrieving cluster {{.Cluster}} {{.LogSource}} logging configurations..." }, { "id": "Retrieving cluster {{.Cluster}}...", "translation": "Retrieving cluster {{.Cluster}}..." }, { "id": "Retrieving dedicated host pool {{.DedicatedHostPoolID}}...", "translation": "Retrieving dedicated host pool {{.DedicatedHostPoolID}}..." }, { "id": "Retrieving dedicated host {{.DedicatedHostID}}...", "translation": "Retrieving dedicated host {{.DedicatedHostID}}..." }, { "id": "Retrieving health check monitor settings for NLB pods...", "translation": "Retrieving health check monitor settings for NLB pods..." }, { "id": "Retrieving health check monitor statuses for NLB pods...", "translation": "Retrieving health check monitor statuses for NLB pods..." }, { "id": "Retrieving health check monitors for NLB pods in cluster {{.Cluster}}...", "translation": "Retrieving health check monitors for NLB pods in cluster {{.Cluster}}..." }, { "id": "Retrieving host details...", "translation": "Retrieving host details..." }, { "id": "Retrieving hosts...", "translation": "Retrieving hosts..." }, { "id": "Retrieving location subdomains...", "translation": "Retrieving location subdomains..." }, { "id": "Retrieving location...", "translation": "Retrieving location..." }, { "id": "Retrieving locations...", "translation": "Retrieving locations..." }, { "id": "Retrieving log forwarding filter {{.Filter}} for cluster {{.Cluster}}...", "translation": "Retrieving log forwarding filter {{.Filter}} for cluster {{.Cluster}}..." }, { "id": "Retrieving service clusters...", "translation": "Retrieving service clusters..." }, { "id": "Retrieving the log forwarding filters for cluster {{.Cluster}}...", "translation": "Retrieving the log forwarding filters for cluster {{.Cluster}}..." }, { "id": "Retrieving worker pool {{.Pool}} from cluster {{.Cluster}}...", "translation": "Retrieving worker pool {{.Pool}} from cluster {{.Cluster}}..." }, { "id": "Retrieving worker {{.WorkerID}}...", "translation": "Retrieving worker {{.WorkerID}}..." }, { "id": "Revision", "translation": "Revision" }, { "id": "Revision Upgrade Available", "translation": "Revision Upgrade Available" }, { "id": "Rewrite scripts that call IBM Cloud Kubernetes Service plug-in commands. Legacy-structured commands are replaced with beta-structured commands.", "translation": "Rewrite scripts that call IBM Cloud Kubernetes Service plug-in commands. Legacy-structured commands are replaced with beta-structured commands." }, { "id": "Rewrite the source file with the updated command structure.", "translation": "Rewrite the source file with the updated command structure." }, { "id": "Roll back the Ingress ALB add-on to the previous build. All ALB pods in your cluster revert to their previously running state.", "translation": "Roll back the Ingress ALB add-on to the previous build. All ALB pods in your cluster revert to their previously running state." }, { "id": "Rolling back update for all application load balancer (ALB) pods in cluster {{.Cluster}}...", "translation": "Rolling back update for all application load balancer (ALB) pods in cluster {{.Cluster}}..." }, { "id": "Rollout Error Count", "translation": "Rollout Error Count" }, { "id": "Rollout Errors", "translation": "Rollout Errors" }, { "id": "Rollout Success Count", "translation": "Rollout Success Count" }, { "id": "Rollout Successes", "translation": "Rollout Successes" }, { "id": "Rotate the CA certificates of a cluster, which requires that you previously created CA certificates. Rotating invalidates the previous certificates and refreshes the API server of the cluster.", "translation": "Rotate the CA certificates of a cluster, which requires that you previously created CA certificates. Rotating invalidates the previous certificates and refreshes the API server of the cluster." }, { "id": "Rotating the CA certificates invalidates the previous certificates and refreshes the cluster API server. Make sure that any tooling that relies on the previous certificates is updated. Are you sure you want to rotate CA certificates for cluster '{{.Cluster}}'?", "translation": "Rotating the CA certificates invalidates the previous certificates and refreshes the cluster API server. Make sure that any tooling that relies on the previous certificates is updated. Are you sure you want to rotate CA certificates for cluster '{{.Cluster}}'?" }, { "id": "Rotation Date", "translation": "Rotation Date" }, { "id": "Router", "translation": "Router" }, { "id": "Run '{{.Command}}' for more details on error status.", "translation": "Run '{{.Command}}' for more details on error status." }, { "id": "Run '{{.Command}}' to determine the default version and try again.", "translation": "Run '{{.Command}}' to determine the default version and try again." }, { "id": "Run operations against a security group.", "translation": "Run operations against a security group." }, { "id": "Run the following command to install the agent on a cluster:", "translation": "Run the following command to install the agent on a cluster:" }, { "id": "SSL Cert Secret Name", "translation": "SSL Cert Secret Name" }, { "id": "SSL Cert Status", "translation": "SSL Cert Status" }, { "id": "Satellite", "translation": "Satellite" }, { "id": "Satellite Location", "translation": "Satellite Location" }, { "id": "Satellite connector agent for {{.Platform}} was successfully returned {{.NotificationForUser}}", "translation": "Satellite connector agent for {{.Platform}} was successfully returned {{.NotificationForUser}}" }, { "id": "Satellite connector {{.Name}} was successfully created with ID {{.ID}}", "translation": "Satellite connector {{.Name}} was successfully created with ID {{.ID}}" }, { "id": "Scope", "translation": "Scope" }, { "id": "Search Kubernetes resources that are managed by Satellite.", "translation": "Search Kubernetes resources that are managed by Satellite." }, { "id": "Search and view Kubernetes resources that are managed by a Satellite configuration.", "translation": "Search and view Kubernetes resources that are managed by a Satellite configuration." }, { "id": "Secondary Storage", "translation": "Secondary Storage" }, { "id": "Secondary Storage Configuration", "translation": "Secondary Storage Configuration" }, { "id": "Secondary Storage Configurations", "translation": "Secondary Storage Configurations" }, { "id": "Secondary Storage Encrypted", "translation": "Secondary Storage Encrypted" }, { "id": "Secondary storage options are available. To see them, run '{{.Command}}'.", "translation": "Secondary storage options are available. To see them, run '{{.Command}}'." }, { "id": "Secret Group", "translation": "Secret Group" }, { "id": "Secret Group ID of the IBM Cloud Secret Manager instance where the secrets are persisted.", "translation": "Secret Group ID of the IBM Cloud Secret Manager instance where the secrets are persisted." }, { "id": "Secret Name", "translation": "Secret Name" }, { "id": "Secret Namespace", "translation": "Secret Namespace" }, { "id": "Secret Parameters", "translation": "Secret Parameters" }, { "id": "Secret Status", "translation": "Secret Status" }, { "id": "Secret Type", "translation": "Secret Type" }, { "id": "See autoscaling status and configuration for Ingress ALBs.", "translation": "See autoscaling status and configuration for Ingress ALBs." }, { "id": "See the worker pool that each worker belongs to.", "translation": "See the worker pool that each worker belongs to." }, { "id": "Select one flag and run the command again.", "translation": "Select one flag and run the command again." }, { "id": "Select the IBM Cloud region to manage your Satellite location from. Choose a region close to your on-prem data center for better performance. See {{.URL}}.", "translation": "Select the IBM Cloud region to manage your Satellite location from. Choose a region close to your on-prem data center for better performance. See {{.URL}}." }, { "id": "Self-link", "translation": "Self-link" }, { "id": "Server", "translation": "Server" }, { "id": "Server Type", "translation": "Server Type" }, { "id": "Service", "translation": "Service" }, { "id": "Service Subnet", "translation": "Service Subnet" }, { "id": "Service subnet", "translation": "Service subnet" }, { "id": "Set Kubernetes taints for all worker nodes in a worker pool. Taints prevent pods without matching tolerations from running on the worker nodes.", "translation": "Set Kubernetes taints for all worker nodes in a worker pool. Taints prevent pods without matching tolerations from running on the worker nodes." }, { "id": "Set a registered IBM Cloud Secrets Manager instance as the default. If an existing default instance exists, it is unset.", "translation": "Set a registered IBM Cloud Secrets Manager instance as the default. If an existing default instance exists, it is unset." }, { "id": "Set a subdomain for the hosts assigned to the control plane in a Satellite location.", "translation": "Set a subdomain for the hosts assigned to the control plane in a Satellite location." }, { "id": "Set and enable the PodSecurity admission configuration for a cluster's Kubernetes API server.", "translation": "Set and enable the PodSecurity admission configuration for a cluster's Kubernetes API server." }, { "id": "Set and manage subdomains for the hosts assigned to the control plane in a Satellite location.", "translation": "Set and manage subdomains for the hosts assigned to the control plane in a Satellite location." }, { "id": "Set and remove Kubernetes taints for all worker nodes in a worker pool.", "translation": "Set and remove Kubernetes taints for all worker nodes in a worker pool." }, { "id": "Set and remove custom Kubernetes labels for all worker nodes in a worker pool.", "translation": "Set and remove custom Kubernetes labels for all worker nodes in a worker pool." }, { "id": "Set and unset credentials that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account.", "translation": "Set and unset credentials that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account." }, { "id": "Set authentication settings for an endpoint. There are two TLS connections in the request flow. The 'source' options refer to the TLS handshake between the source and the Connector service. The 'destination' options refer to the TLS handshake between the Connector service and your destination or target server. You can provide certificates for one or both of these connections. Unspecified settings are set to their default values.", "translation": "Set authentication settings for an endpoint. There are two TLS connections in the request flow. The 'source' options refer to the TLS handshake between the source and the Connector service. The 'destination' options refer to the TLS handshake between the Connector service and your destination or target server. You can provide certificates for one or both of these connections. Unspecified settings are set to their default values." }, { "id": "Set credentials for Akamai.", "translation": "Set credentials for Akamai." }, { "id": "Set credentials for Cloudflare.", "translation": "Set credentials for Cloudflare." }, { "id": "Set credentials that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account.", "translation": "Set credentials that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account." }, { "id": "Set custom Kubernetes labels for all worker nodes in a worker pool.", "translation": "Set custom Kubernetes labels for all worker nodes in a worker pool." }, { "id": "Set custom Kubernetes labels in the format 'key=value' for all the worker nodes in the worker pool. For multiple labels, repeat this flag. To keep any existing custom labels on the worker pool, include those labels with this flag.", "translation": "Set custom Kubernetes labels in the format 'key=value' for all the worker nodes in the worker pool. For multiple labels, repeat this flag. To keep any existing custom labels on the worker pool, include those labels with this flag." }, { "id": "Set the API endpoint for the service.", "translation": "Set the API endpoint for the service." }, { "id": "Set the IBM Cloud Secrets Manager instance as the default. If an existing default instance exists, it is unset.", "translation": "Set the IBM Cloud Secrets Manager instance as the default. If an existing default instance exists, it is unset." }, { "id": "Set the OpenShift web console and OAuth server access type.", "translation": "Set the OpenShift web console and OAuth server access type." }, { "id": "Set the audit webhook configuration for a cluster's Kubernetes API server. The webhook backend forwards API server audit logs to a remote server.", "translation": "Set the audit webhook configuration for a cluster's Kubernetes API server. The webhook backend forwards API server audit logs to a remote server." }, { "id": "Set the configuration and secret parameters of a Satellite storage configuration.", "translation": "Set the configuration and secret parameters of a Satellite storage configuration." }, { "id": "Set the network metadata in a specific zone for the given worker pools in a classic cluster.", "translation": "Set the network metadata in a specific zone for the given worker pools in a classic cluster." }, { "id": "Set the notification level. Accepted values are 'Normal' or 'Warning'. The default is 'Warning'.", "translation": "Set the notification level. Accepted values are 'Normal' or 'Warning'. The default is 'Warning'." }, { "id": "Set this flag to 'cloud_pak' only if you use this cluster with a Cloud Pak that has an OpenShift entitlement.", "translation": "Set this flag to 'cloud_pak' only if you use this cluster with a Cloud Pak that has an OpenShift entitlement." }, { "id": "Set to 'true' to follow any redirects that are returned by the IP. This flag is valid only for type 'HTTP' or 'HTTPS'.", "translation": "Set to 'true' to follow any redirects that are returned by the IP. This flag is valid only for type 'HTTP' or 'HTTPS'." }, { "id": "Set to 'true' to not validate the certificate. This flag is valid only for type 'HTTP' or 'HTTPS'.", "translation": "Set to 'true' to not validate the certificate. This flag is valid only for type 'HTTP' or 'HTTPS'." }, { "id": "Sets labels on all the workers in the worker pool.", "translation": "Sets labels on all the workers in the worker pool." }, { "id": "Sets taints on all the workers in the worker pool. Specify the Kubernetes taint in the format 'key=value:effect'. The 'key=value' is a pair such as 'env=prod' that you use to manage the worker node taint and matching pod tolerations. The 'effect' is a Kubernetes taint effect such as 'NoSchedule' that describes how the taint works.", "translation": "Sets taints on all the workers in the worker pool. Specify the Kubernetes taint in the format 'key=value:effect'. The 'key=value' is a pair such as 'env=prod' that you use to manage the worker node taint and matching pod tolerations. The 'effect' is a Kubernetes taint effect such as 'NoSchedule' that describes how the taint works." }, { "id": "Setting Kubernetes API server PodSecurity config for {{.Cluster}}...", "translation": "Setting Kubernetes API server PodSecurity config for {{.Cluster}}..." }, { "id": "Setting Kubernetes API server audit webhook config for {{.Cluster}}...", "translation": "Setting Kubernetes API server audit webhook config for {{.Cluster}}..." }, { "id": "Setting OpenShift web console and OAuth server access type for {{.Cluster}}...", "translation": "Setting OpenShift web console and OAuth server access type for {{.Cluster}}..." }, { "id": "Setting autoscaling configuration for {{.ALBID}}...", "translation": "Setting autoscaling configuration for {{.ALBID}}..." }, { "id": "Setting credentials for region {{.Region}}...", "translation": "Setting credentials for region {{.Region}}..." }, { "id": "Setting custom labels for worker pool '{{.Pool}}' in cluster '{{.Cluster}}'...", "translation": "Setting custom labels for worker pool '{{.Pool}}' in cluster '{{.Cluster}}'..." }, { "id": "Setting size for pool {{.Pool}} in cluster {{.Cluster}} to {{.Size}}...", "translation": "Setting size for pool {{.Pool}} in cluster {{.Cluster}} to {{.Size}}..." }, { "id": "Setting taints for worker pool {{.Pool}} in cluster {{.Cluster}}...", "translation": "Setting taints for worker pool {{.Pool}} in cluster {{.Cluster}}..." }, { "id": "Setting the API endpoint to {{.Endpoint}}...", "translation": "Setting the API endpoint to {{.Endpoint}}..." }, { "id": "Setting the logsource to {{.Logsource}} because a logsource was not specified.", "translation": "Setting the logsource to {{.Logsource}} because a logsource was not specified." }, { "id": "Setting the port to {{.Port}} because one was not specified.", "translation": "Setting the port to {{.Port}} because one was not specified." }, { "id": "Setting the protocol to {{.Protocol}} because a protocol was not specified.", "translation": "Setting the protocol to {{.Protocol}} because a protocol was not specified." }, { "id": "Setting the type to {{.Type}} because a type was not specified.", "translation": "Setting the type to {{.Type}} because a type was not specified." }, { "id": "Setting the verify mode to {{.VerifyMode}} because a verify mode was not specified.", "translation": "Setting the verify mode to {{.VerifyMode}} because a verify mode was not specified." }, { "id": "Setting the {{.Namespace }} namespace configuration because one was not specified.", "translation": "Setting the {{.Namespace }} namespace configuration because one was not specified." }, { "id": "Show IBM Cloud Secret Manager instances that were unregistered from the cluster.", "translation": "Show IBM Cloud Secret Manager instances that were unregistered from the cluster." }, { "id": "Show additional cluster resources such as add-ons, VLANs, and subnets.", "translation": "Show additional cluster resources such as add-ons, VLANs, and subnets." }, { "id": "Show additional storage drives.", "translation": "Show additional storage drives." }, { "id": "Show help", "translation": "Show help" }, { "id": "Show only regional data centers.", "translation": "Show only regional data centers." }, { "id": "Show only the versions for the specified container platform.", "translation": "Show only the versions for the specified container platform." }, { "id": "Show only worker nodes that belong to the worker pool you specify.", "translation": "Show only worker nodes that belong to the worker pool you specify." }, { "id": "Show secrets that were deleted from the cluster.", "translation": "Show secrets that were deleted from the cluster." }, { "id": "Show the available worker node flavors in the zone for VPC.", "translation": "Show the available worker node flavors in the zone for VPC." }, { "id": "Show the logging configurations that match the configuration that you're viewing.", "translation": "Show the logging configurations that match the configuration that you're viewing." }, { "id": "Show the logging filters that render previous filters obsolete.", "translation": "Show the logging filters that render previous filters obsolete." }, { "id": "Show the reason for worker node deletion.", "translation": "Show the reason for worker node deletion." }, { "id": "Show worker nodes that were deleted from the cluster.", "translation": "Show worker nodes that were deleted from the cluster." }, { "id": "Silent. Return only the registration command in the output.", "translation": "Silent. Return only the registration command in the output." }, { "id": "Skip SSL Validation:", "translation": "Skip SSL Validation:" }, { "id": "Skip adding RBAC roles. Include this option only if you manage your own Kubernetes RBAC roles. If you use IAM service access roles to manage all your RBAC users, do not include this option.", "translation": "Skip adding RBAC roles. Include this option only if you manage your own Kubernetes RBAC roles. If you use IAM service access roles to manage all your RBAC users, do not include this option." }, { "id": "Skip checking for infrastructure permissions before completing this action. Note that if you do not have the correct infrastructure permissions, this action might only partially succeed.", "translation": "Skip checking for infrastructure permissions before completing this action. Note that if you do not have the correct infrastructure permissions, this action might only partially succeed." }, { "id": "Skips checking of master health before initiating action.", "translation": "Skips checking of master health before initiating action." }, { "id": "Skips validation of the org and space names when they are specified. This can result in a broken logging config if the values are invalid but will take less time to process.", "translation": "Skips validation of the org and space names when they are specified. This can result in a broken logging config if the values are invalid but will take less time to process." }, { "id": "Some commands in the script are deprecated and don't have a replacement command. These commands are flagged in the script with '# WARNING' messages.", "translation": "Some commands in the script are deprecated and don't have a replacement command. These commands are flagged in the script with '# WARNING' messages." }, { "id": "Source", "translation": "Source" }, { "id": "Source certificates are not supported for endpoints with the 'location' dest-type.", "translation": "Source certificates are not supported for endpoints with the 'location' dest-type." }, { "id": "Space", "translation": "Space" }, { "id": "Specify a 'key=value' pair for configuration parameters. To see the configuration parameters in a storage template, run 'ibmcloud sat storage template get'.", "translation": "Specify a 'key=value' pair for configuration parameters. To see the configuration parameters in a storage template, run 'ibmcloud sat storage template get'." }, { "id": "Specify a 'key=value' pair for storage class parameters. To see the storage class parameters in a storage template, run 'ibmcloud sat storage template get'.", "translation": "Specify a 'key=value' pair for storage class parameters. To see the storage class parameters in a storage template, run 'ibmcloud sat storage template get'." }, { "id": "Specify a custom subnet CIDR to provide private IP addresses for pods. The subnet must be at least '/23' or larger. For more info, see {{.URL}}", "translation": "Specify a custom subnet CIDR to provide private IP addresses for pods. The subnet must be at least '/23' or larger. For more info, see {{.URL}}" }, { "id": "Specify a custom subnet CIDR to provide private IP addresses for pods. The subnet must be at least '/23' or larger. For more info, see {{.URL}}. Default value: '172.30.0.0/16'", "translation": "Specify a custom subnet CIDR to provide private IP addresses for pods. The subnet must be at least '/23' or larger. For more info, see {{.URL}}. Default value: '172.30.0.0/16'" }, { "id": "Specify a custom subnet CIDR to provide private IP addresses for pods. This option is used only if you enable Red Hat CoreOS with the '--coreos-enabled' option. The subnet must be '/23' or larger. See {{.URL}}. Default value: '172.16.0.0/16", "translation": "Specify a custom subnet CIDR to provide private IP addresses for pods. This option is used only if you enable Red Hat CoreOS with the '--coreos-enabled' option. The subnet must be '/23' or larger. See {{.URL}}. Default value: '172.16.0.0/16" }, { "id": "Specify a custom subnet CIDR to provide private IP addresses for services. The subnet must be at least '/24' or larger. For more info, see {{.URL}} Default value: '172.21.0.0/16'", "translation": "Specify a custom subnet CIDR to provide private IP addresses for services. The subnet must be at least '/24' or larger. For more info, see {{.URL}} Default value: '172.21.0.0/16'" }, { "id": "Specify a custom subnet CIDR to provide private IP addresses for services. The subnet must be at least '/24' or larger. For more info, see {{.URL}}. Default value: '172.21.0.0/16'", "translation": "Specify a custom subnet CIDR to provide private IP addresses for services. The subnet must be at least '/24' or larger. For more info, see {{.URL}}. Default value: '172.21.0.0/16'" }, { "id": "Specify a custom subnet CIDR to provide private IP addresses for services. This option is used only if you enable Red Hat CoreOS with the '--coreos-enabled' option. The subnet must be '/24' or larger. See {{.URL}}. Default value: '172.20.0.0/16'", "translation": "Specify a custom subnet CIDR to provide private IP addresses for services. This option is used only if you enable Red Hat CoreOS with the '--coreos-enabled' option. The subnet must be '/24' or larger. See {{.URL}}. Default value: '172.20.0.0/16'" }, { "id": "Specify a name for the ALB secret when it is created in the cluster. This value is required.", "translation": "Specify a name for the ALB secret when it is created in the cluster. This value is required." }, { "id": "Specify a name for the Satellite location. Location names must start with a letter, can contain letters, numbers, periods (.), and hyphen (-), and must be fewer than 36 characters. Do not reuse names, even if the other location is deleted.", "translation": "Specify a name for the Satellite location. Location names must start with a letter, can contain letters, numbers, periods (.), and hyphen (-), and must be fewer than 36 characters. Do not reuse names, even if the other location is deleted." }, { "id": "Specify a portable public or private IP address that is available on the 'vlan' and in the 'zone' of the ALB to be created or configured.", "translation": "Specify a portable public or private IP address that is available on the 'vlan' and in the 'zone' of the ALB to be created or configured." }, { "id": "Specify a portable public or private IP address that is available on the 'vlan' and in the 'zone' of the ALB to be created or enabled.", "translation": "Specify a portable public or private IP address that is available on the 'vlan' and in the 'zone' of the ALB to be created or enabled." }, { "id": "Specify a provider. Available options are `classic`, `vpc-classic` and `vpc-gen2`.", "translation": "Specify a provider. Available options are `classic`, `vpc-classic` and `vpc-gen2`." }, { "id": "Specify a worker pool.", "translation": "Specify a worker pool." }, { "id": "Specify an add-on name to filter versions for.", "translation": "Specify an add-on name to filter versions for." }, { "id": "Specify an add-on version to display options for. If no version is specified, the default version's options are displayed.", "translation": "Specify an add-on version to display options for. If no version is specified, the default version's options are displayed." }, { "id": "Specify an existing OpenShift entitlement for this cluster's worker nodes by providing your Red Hat account pull secret.", "translation": "Specify an existing OpenShift entitlement for this cluster's worker nodes by providing your Red Hat account pull secret." }, { "id": "Specify installation options for the add-on. If no parameters are specified, the default values are used. Review the available options with the 'ibmcloud ks cluster addon options' command.", "translation": "Specify installation options for the add-on. If no parameters are specified, the default values are used. Review the available options with the 'ibmcloud ks cluster addon options' command." }, { "id": "Specify one or more worker IDs.", "translation": "Specify one or more worker IDs." }, { "id": "Specify security group ID.", "translation": "Specify security group ID." }, { "id": "Specify the ALB image version. To see supported image versions, run 'ibmcloud ks alb versions'.", "translation": "Specify the ALB image version. To see supported image versions, run 'ibmcloud ks alb versions'." }, { "id": "Specify the ALB image version. To see supported image versions, run '{{.Command}}'.", "translation": "Specify the ALB image version. To see supported image versions, run '{{.Command}}'." }, { "id": "Specify the API version of the service that you want to use.", "translation": "Specify the API version of the service that you want to use." }, { "id": "Specify the GitRef to use for the Satellite subscription. Strategy: GitOps.", "translation": "Specify the GitRef to use for the Satellite subscription. Strategy: GitOps." }, { "id": "Specify the IAM role for the service key. This flag does not work if you specify an existing key to use or for services that are not IAM-enabled, such as Cloud Foundry services.", "translation": "Specify the IAM role for the service key. This flag does not work if you specify an existing key to use or for services that are not IAM-enabled, such as Cloud Foundry services." }, { "id": "Specify the IBM region to store the Satellite configuration data. Strategy: Direct Upload.", "translation": "Specify the IBM region to store the Satellite configuration data. Strategy: Direct Upload." }, { "id": "Specify the ID of a Satellite storage assignment.", "translation": "Specify the ID of a Satellite storage assignment." }, { "id": "Specify the ID of a Satellite storage assignment. To find assignments, run 'ibmcloud sat storage assignment ls'.", "translation": "Specify the ID of a Satellite storage assignment. To find assignments, run 'ibmcloud sat storage assignment ls'." }, { "id": "Specify the ID of a Satellite storage assignment. To list available assignments, run 'ibmcloud sat storage assignment ls'.", "translation": "Specify the ID of a Satellite storage assignment. To list available assignments, run 'ibmcloud sat storage assignment ls'." }, { "id": "Specify the ID of a container in an Kubernetes Service cluster. To find the ID of your container, run '{{.Command}}' and export the environment variable in the output. Then, run 'kubectl get pods' to list your pods, run 'kubectl describe pod <{{.PodName}}>', and find the 'Container ID' field for the container. Finally, remove the 'docker://' prefix from the ID before you use the container ID in this command.", "translation": "Specify the ID of a container in an Kubernetes Service cluster. To find the ID of your container, run '{{.Command}}' and export the environment variable in the output. Then, run 'kubectl get pods' to list your pods, run 'kubectl describe pod <{{.PodName}}>', and find the 'Container ID' field for the container. Finally, remove the 'docker://' prefix from the ID before you use the container ID in this command." }, { "id": "Specify the ID of the ACL. To list all ACLs, run 'ibmcloud sat experimental acl ls'.", "translation": "Specify the ID of the ACL. To list all ACLs, run 'ibmcloud sat experimental acl ls'." }, { "id": "Specify the ID of the Satellite cluster for the assignment. To find the cluster ID, run 'ibmcloud oc cluster ls --provider satellite'.", "translation": "Specify the ID of the Satellite cluster for the assignment. To find the cluster ID, run 'ibmcloud oc cluster ls --provider satellite'." }, { "id": "Specify the ID of the Satellite cluster for the assignments. To get the cluster ID, run 'ibmcloud oc cluster ls --provider satellite'.", "translation": "Specify the ID of the Satellite cluster for the assignments. To get the cluster ID, run 'ibmcloud oc cluster ls --provider satellite'." }, { "id": "Specify the ID of the logging configuration.", "translation": "Specify the ID of the logging configuration." }, { "id": "Specify the ID of the logging filter.", "translation": "Specify the ID of the logging filter." }, { "id": "Specify the ID of the service cluster for the assignment. To find the service cluster ID, run 'ibmcloud sat service ls --location '.", "translation": "Specify the ID of the service cluster for the assignment. To find the service cluster ID, run 'ibmcloud sat service ls --location '." }, { "id": "Specify the ID of the service cluster for the assignments. To find the service cluster ID, run 'ibmcloud sat service ls --location '.", "translation": "Specify the ID of the service cluster for the assignments. To find the service cluster ID, run 'ibmcloud sat service ls --location '." }, { "id": "Specify the ID of the {{.VLANType}}. To see available VLANs, run '{{.Command}}'.", "translation": "Specify the ID of the {{.VLANType}}. To see available VLANs, run '{{.Command}}'." }, { "id": "Specify the ID or name of the location that contains the configurations you want to list. To find available locations, run 'ibmcloud sat location ls'.", "translation": "Specify the ID or name of the location that contains the configurations you want to list. To find available locations, run 'ibmcloud sat location ls'." }, { "id": "Specify the IP address for each control plane host, in the format '--ip x.x.x.1 --ip x.x.x.2 --ip x.x.x.3'. For multizone clusters, use one IP address from each zone. To find the IP address, run 'ibmcloud sat host ls --location ' and look for 'Worker IP' for hosts labeled 'infrastructure'.", "translation": "Specify the IP address for each control plane host, in the format '--ip x.x.x.1 --ip x.x.x.2 --ip x.x.x.3'. For multizone clusters, use one IP address from each zone. To find the IP address, run 'ibmcloud sat host ls --location ' and look for 'Worker IP' for hosts labeled 'infrastructure'." }, { "id": "Specify the Kubernetes namespace.", "translation": "Specify the Kubernetes namespace." }, { "id": "Specify the Kubernetes or OpenShift version, including at least the major.minor version. If you do not include this flag, the default version is used. To see available versions, run '{{.Command}}'.", "translation": "Specify the Kubernetes or OpenShift version, including at least the major.minor version. If you do not include this flag, the default version is used. To see available versions, run '{{.Command}}'." }, { "id": "Specify the Kubernetes resource ID. To find Kubernetes resources, run 'ibmcloud sat resource ls'.", "translation": "Specify the Kubernetes resource ID. To find Kubernetes resources, run 'ibmcloud sat resource ls'." }, { "id": "Specify the Kubernetes version, including at least the major.minor version. If you do not include this flag, the default version is used. To see available versions, run '{{.Command}}'.", "translation": "Specify the Kubernetes version, including at least the major.minor version. If you do not include this flag, the default version is used. To see available versions, run '{{.Command}}'." }, { "id": "Specify the OpenShift web console and OAuth server access type.", "translation": "Specify the OpenShift web console and OAuth server access type." }, { "id": "Specify the Satellite cluster name or ID. To find registered clusters, run 'ibmcloud sat cluster ls'.", "translation": "Specify the Satellite cluster name or ID. To find registered clusters, run 'ibmcloud sat cluster ls'." }, { "id": "Specify the Satellite storage configuration for the assignment. to find configurations, run 'ibmcloud sat storage config ls'.", "translation": "Specify the Satellite storage configuration for the assignment. to find configurations, run 'ibmcloud sat storage config ls'." }, { "id": "Specify the Satellite storage configuration template name. To list available storage configuration templates, run 'ibmcloud sat storage template ls'.", "translation": "Specify the Satellite storage configuration template name. To list available storage configuration templates, run 'ibmcloud sat storage template ls'." }, { "id": "Specify the Satellite storage configuration template version. If you do not include this option, the default version is used. To list available storage configuration templates, run 'ibmcloud sat storage template ls'.", "translation": "Specify the Satellite storage configuration template version. If you do not include this option, the default version is used. To list available storage configuration templates, run 'ibmcloud sat storage template ls'." }, { "id": "Specify the Satellite subscription ID or name. To find subscriptions, run 'ibmcloud sat cluster ls'.", "translation": "Specify the Satellite subscription ID or name. To find subscriptions, run 'ibmcloud sat cluster ls'." }, { "id": "Specify the URL of the remote repository to use for the subscription. Strategy: GitOps.", "translation": "Specify the URL of the remote repository to use for the subscription. Strategy: GitOps." }, { "id": "Specify the absolute file path to collect logs from inside the container. To specify more than one path, use multiple flags, such as `-p path1 -p path2`. Required parameter when specifying 'application' for the log source. Wildcards such as '/var/log/*.log' are accepted but recursive globs such are '/var/log/**/test.log' are not.", "translation": "Specify the absolute file path to collect logs from inside the container. To specify more than one path, use multiple flags, such as `-p path1 -p path2`. Required parameter when specifying 'application' for the log source. Wildcards such as '/var/log/*.log' are accepted but recursive globs such are '/var/log/**/test.log' are not." }, { "id": "Specify the audit policy type.", "translation": "Specify the audit policy type." }, { "id": "Specify the certificate CRN.", "translation": "Specify the certificate CRN." }, { "id": "Specify the cluster groups for the assignment. To find cluster groups, run 'ibmcloud sat group ls'.", "translation": "Specify the cluster groups for the assignment. To find cluster groups, run 'ibmcloud sat group ls'." }, { "id": "Specify the cluster name or ID to add to the cluster group. To list registered clusters, run 'ibmcloud sat cluster ls'.", "translation": "Specify the cluster name or ID to add to the cluster group. To list registered clusters, run 'ibmcloud sat cluster ls'." }, { "id": "Specify the cluster name or ID.", "translation": "Specify the cluster name or ID." }, { "id": "Specify the cluster name or ID. To list registered clusters, run 'ibmcloud sat cluster ls'.", "translation": "Specify the cluster name or ID. To list registered clusters, run 'ibmcloud sat cluster ls'." }, { "id": "Specify the cluster name or ID. To list the clusters in your cluster group, run 'ibmcloud sat group get --group '.", "translation": "Specify the cluster name or ID. To list the clusters in your cluster group, run 'ibmcloud sat group get --group '." }, { "id": "Specify the cluster name or the ID. To list registered clusters, run 'ibmcloud sat cluster ls'.", "translation": "Specify the cluster name or the ID. To list registered clusters, run 'ibmcloud sat cluster ls'." }, { "id": "Specify the containers that you want to collect logs for. To specify more than one path, use multiple flags, such as '-C container1 -C container2'. This option is required for the 'application' log source. If not provided, logs are collected from all containers from the application log paths passed in.", "translation": "Specify the containers that you want to collect logs for. To specify more than one path, use multiple flags, such as '-C container1 -C container2'. This option is required for the 'application' log source. If not provided, logs are collected from all containers from the application log paths passed in." }, { "id": "Specify the desired number of workers per zone in this worker pool.", "translation": "Specify the desired number of workers per zone in this worker pool." }, { "id": "Specify the destination's protocol. If you do not specify this option, the destination protocol is inherited from the source protocol.", "translation": "Specify the destination's protocol. If you do not specify this option, the destination protocol is inherited from the source protocol." }, { "id": "Specify the file path for the configuration version file.", "translation": "Specify the file path for the configuration version file." }, { "id": "Specify the maximum number of history entries to return.", "translation": "Specify the maximum number of history entries to return." }, { "id": "Specify the maximum number of resource entries for the search to return.", "translation": "Specify the maximum number of resource entries for the search to return." }, { "id": "Specify the migration type.", "translation": "Specify the migration type." }, { "id": "Specify the name of a Satellite location. To list available locations, run 'ibmcloud sat location ls'. This option cannot be used by service administrator.", "translation": "Specify the name of a Satellite location. To list available locations, run 'ibmcloud sat location ls'. This option cannot be used by service administrator." }, { "id": "Specify the name of a Satellite storage class.", "translation": "Specify the name of a Satellite storage class." }, { "id": "Specify the name of the IBM Cloud Object Storage bucket to store your Satellite location control plane data. Otherwise, a new bucket is created for you.", "translation": "Specify the name of the IBM Cloud Object Storage bucket to store your Satellite location control plane data. Otherwise, a new bucket is created for you." }, { "id": "Specify the name of the cluster that you want to register", "translation": "Specify the name of the cluster that you want to register" }, { "id": "Specify the name of the configuration to use for the subscription. To find available configurations, run 'ibmcloud sat config ls'.", "translation": "Specify the name of the configuration to use for the subscription. To find available configurations, run 'ibmcloud sat config ls'." }, { "id": "Specify the name of the operating system.", "translation": "Specify the name of the operating system." }, { "id": "Specify the name of the service instance. To see a list of available service instances, run '{{.Command1}}' for Cloud Foundry services, or '{{.Command2}}' for IAM-enabled services.", "translation": "Specify the name of the service instance. To see a list of available service instances, run '{{.Command1}}' for Cloud Foundry services, or '{{.Command2}}' for IAM-enabled services." }, { "id": "Specify the name of the storage configuration for the custom storage class. To list Satellite storage configurations, run 'ibmcloud sat storage config ls'.", "translation": "Specify the name of the storage configuration for the custom storage class. To list Satellite storage configurations, run 'ibmcloud sat storage config ls'." }, { "id": "Specify the name of the storage configuration.", "translation": "Specify the name of the storage configuration." }, { "id": "Specify the name or GUID of an existing service key. If you define a service key, you cannot set the '--role' option at the same time.", "translation": "Specify the name or GUID of an existing service key. If you define a service key, you cannot set the '--role' option at the same time." }, { "id": "Specify the name or ID of a Satellite cluster group. To list available cluster groups, run 'ibmcloud sat group ls'.", "translation": "Specify the name or ID of a Satellite cluster group. To list available cluster groups, run 'ibmcloud sat group ls'." }, { "id": "Specify the name or ID of a Satellite cluster group. To list registered clusters, run 'ibmcloud sat cluster ls'.", "translation": "Specify the name or ID of a Satellite cluster group. To list registered clusters, run 'ibmcloud sat cluster ls'." }, { "id": "Specify the name or ID of a Satellite configuration. To list available configurations, run 'ibmcloud sat config ls'.", "translation": "Specify the name or ID of a Satellite configuration. To list available configurations, run 'ibmcloud sat config ls'." }, { "id": "Specify the name or ID of a Satellite storage configuration. To list Satellite storage configurations, run 'ibmcloud sat storage config ls'.", "translation": "Specify the name or ID of a Satellite storage configuration. To list Satellite storage configurations, run 'ibmcloud sat storage config ls'." }, { "id": "Specify the name or ID of a Satellite storage configuration. To list available configurations, run 'ibmcloud sat storage config ls'.", "translation": "Specify the name or ID of a Satellite storage configuration. To list available configurations, run 'ibmcloud sat storage config ls'." }, { "id": "Specify the name or ID of a Satellite storage configuration. To list available storage configurations, run 'ibmcloud sat storage config ls'.", "translation": "Specify the name or ID of a Satellite storage configuration. To list available storage configurations, run 'ibmcloud sat storage config ls'." }, { "id": "Specify the name or ID of a Satellite subscription. To list subscriptions, run 'ibmcloud sat subscription ls'.", "translation": "Specify the name or ID of a Satellite subscription. To list subscriptions, run 'ibmcloud sat subscription ls'." }, { "id": "Specify the name or ID of the Satellite configuration version. To list versions in your configuration, run 'ibmcloud sat config get --config '.", "translation": "Specify the name or ID of the Satellite configuration version. To list versions in your configuration, run 'ibmcloud sat config get --config '." }, { "id": "Specify the name or ID of the Satellite configuration. To list available configurations, run 'ibmcloud sat config ls'.", "translation": "Specify the name or ID of the Satellite configuration. To list available configurations, run 'ibmcloud sat config ls'." }, { "id": "Specify the name or ID of the cluster groups to subscribe to your configuration. To find available cluster groups, run 'ibmcloud sat group ls'.", "translation": "Specify the name or ID of the cluster groups to subscribe to your configuration. To find available cluster groups, run 'ibmcloud sat group ls'." }, { "id": "Specify the name or ID of the endpoint. To find a list of all endpoints, run 'ibmcloud sat endpoint ls'.", "translation": "Specify the name or ID of the endpoint. To find a list of all endpoints, run 'ibmcloud sat endpoint ls'." }, { "id": "Specify the name or ID of the endpoint. To list all endpoints, run 'ibmcloud sat endpoint ls'.", "translation": "Specify the name or ID of the endpoint. To list all endpoints, run 'ibmcloud sat endpoint ls'." }, { "id": "Specify the name or ID of the registered cluster that the Kubernetes resource runs in. To find registered clusters, run 'ibmcloud sat cluster ls'.", "translation": "Specify the name or ID of the registered cluster that the Kubernetes resource runs in. To find registered clusters, run 'ibmcloud sat cluster ls'." }, { "id": "Specify the name or ID of the storage configuration. To list Satellite storage configurations, run 'ibmcloud sat storage config ls'.", "translation": "Specify the name or ID of the storage configuration. To list Satellite storage configurations, run 'ibmcloud sat storage config ls'." }, { "id": "Specify the new cluster groups for the assignment. To list available groups, run 'ibmcloud sat group ls'.", "translation": "Specify the new cluster groups for the assignment. To list available groups, run 'ibmcloud sat group ls'." }, { "id": "Specify the new cluster groups to subscribe to your configuration.", "translation": "Specify the new cluster groups to subscribe to your configuration." }, { "id": "Specify the path to a JSON file on your local machine that has the credentials of the infrastructure provider for the Satellite location. The credential format is provider-specific. See {{.URL}}.", "translation": "Specify the path to a JSON file on your local machine that has the credentials of the infrastructure provider for the Satellite location. The credential format is provider-specific. See {{.URL}}." }, { "id": "Specify the public or private VLAN ID.", "translation": "Specify the public or private VLAN ID." }, { "id": "Specify the region in the infrastructure provider where you plan to create the hosts for the Satellite location. If you include this option, you must also include the '--provider' option.", "translation": "Specify the region in the infrastructure provider where you plan to create the hosts for the Satellite location. If you include this option, you must also include the '--provider' option." }, { "id": "Specify the region to target.", "translation": "Specify the region to target." }, { "id": "Specify the server name indicator, if you specify a 'tls' or 'https' source protocol and want a separate hostname to be added to the TLS handshake.", "translation": "Specify the server name indicator, if you specify a 'tls' or 'https' source protocol and want a separate hostname to be added to the TLS handshake." }, { "id": "Specify the size of the portable subnet. The size must be one of {{.SizeList}}.", "translation": "Specify the size of the portable subnet. The size must be one of {{.SizeList}}." }, { "id": "Specify the storage template name. To list available storage templates, run 'ibmcloud sat storage template ls'.", "translation": "Specify the storage template name. To list available storage templates, run 'ibmcloud sat storage template ls'." }, { "id": "Specify the storage template version. To list available storage templates, run 'ibmcloud sat storage template ls'.", "translation": "Specify the storage template version. To list available storage templates, run 'ibmcloud sat storage template ls'." }, { "id": "Specify the subdomain name. To list existing subdomains, run 'ibmcloud sat location dns ls --location '.", "translation": "Specify the subdomain name. To list existing subdomains, run 'ibmcloud sat location dns ls --location '." }, { "id": "Specify the subnet CIDR.", "translation": "Specify the subnet CIDR." }, { "id": "Specify the subnet ID.", "translation": "Specify the subnet ID." }, { "id": "Specify the timeout interval in seconds for active connections to the destination. Make sure your timeout is compatible with the destination service and protocol 'keep-alive' settings.", "translation": "Specify the timeout interval in seconds for active connections to the destination. Make sure your timeout is compatible with the destination service and protocol 'keep-alive' settings." }, { "id": "Specify the type of ALB.", "translation": "Specify the type of ALB." }, { "id": "Specify the version of the add-on to install. If no version is specified, the default version is installed.", "translation": "Specify the version of the add-on to install. If no version is specified, the default version is installed." }, { "id": "Specify the volume ID. To list available volumes, run 'ibmcloud ks storage volume ls'.", "translation": "Specify the volume ID. To list available volumes, run 'ibmcloud ks storage volume ls'." }, { "id": "Specify the volume attachment ID. To list available attachments, run 'ibmcloud ks storage attachment ls'.", "translation": "Specify the volume attachment ID. To list available attachments, run 'ibmcloud ks storage attachment ls'." }, { "id": "Specify the worker ID. To list available workers, run 'ibmcloud ks workers'.", "translation": "Specify the worker ID. To list available workers, run 'ibmcloud ks workers'." }, { "id": "Specify the zone for the worker pool in a multizone cluster. To list available zones, run '{{.Command}}'.", "translation": "Specify the zone for the worker pool in a multizone cluster. To list available zones, run '{{.Command}}'." }, { "id": "Specify the zone for your location. For high availability, specify 3 zones for your location as '--ha-zone ZONE1_NAME --ha-zone ZONE2_NAME --ha-zone ZONE3_NAME'. The names of the zones must match exactly the names of the corresponding zones in your infrastructure provider where you plan to create hosts.", "translation": "Specify the zone for your location. For high availability, specify 3 zones for your location as '--ha-zone ZONE1_NAME --ha-zone ZONE2_NAME --ha-zone ZONE3_NAME'. The names of the zones must match exactly the names of the corresponding zones in your infrastructure provider where you plan to create hosts." }, { "id": "Specify the zone to list available flavors for. To list available zones, run '{{.Command}}'.", "translation": "Specify the zone to list available flavors for. To list available zones, run '{{.Command}}'." }, { "id": "Specify this option to use the KMS public service endpoint. Otherwise the KMS private service endpoint is used.", "translation": "Specify this option to use the KMS public service endpoint. Otherwise the KMS private service endpoint is used." }, { "id": "Specify where the destination resource runs, either in IBM Cloud ('cloud') or your Satellite location ('location').", "translation": "Specify where the destination resource runs, either in IBM Cloud ('cloud') or your Satellite location ('location')." }, { "id": "Specify whether the cluster should run a single worker node or the default number of worker nodes. To create a single-node cluster, specify 'single-replica'. To create a default cluster with multiple worker nodes, specify 'highly-available'. The 'highly-available' option is applied by default.", "translation": "Specify whether the cluster should run a single worker node or the default number of worker nodes. To create a single-node cluster, specify 'single-replica'. To create a default cluster with multiple worker nodes, specify 'highly-available'. The 'highly-available' option is applied by default." }, { "id": "Start a migration of your IBM Cloud Ingress configmap and resources to use with ALBs that run the Kubernetes Ingress image. This command does not change the image type of your ALBs. For more info, see {{.URL}}", "translation": "Start a migration of your IBM Cloud Ingress configmap and resources to use with ALBs that run the Kubernetes Ingress image. This command does not change the image type of your ALBs. For more info, see {{.URL}}" }, { "id": "Starting the migration of Ingress components and resources in cluster {{.Cluster}} with type {{.MigrateType}}...", "translation": "Starting the migration of Ingress components and resources in cluster {{.Cluster}} with type {{.MigrateType}}..." }, { "id": "Starting to remove Satellite connector {{.ID}} / {{.Name}}...", "translation": "Starting to remove Satellite connector {{.ID}} / {{.Name}}..." }, { "id": "State", "translation": "State" }, { "id": "Status", "translation": "Status" }, { "id": "Storage", "translation": "Storage" }, { "id": "Storage Class Name", "translation": "Storage Class Name" }, { "id": "Storage Class Parameters", "translation": "Storage Class Parameters" }, { "id": "Storage Management Commands", "translation": "Storage Management Commands" }, { "id": "Storage class {{.Class}} added to configuration {{.Config}} successfully.", "translation": "Storage class {{.Class}} added to configuration {{.Config}} successfully." }, { "id": "Storage configuration '{{.Name}}' was successfully created with ID '{{.ID}}'.", "translation": "Storage configuration '{{.Name}}' was successfully created with ID '{{.ID}}'." }, { "id": "Storage configuration {{.Configuration}} and its assignments were successfully removed.", "translation": "Storage configuration {{.Configuration}} and its assignments were successfully removed." }, { "id": "Storage configuration {{.Configuration}} was successfully removed.", "translation": "Storage configuration {{.Configuration}} was successfully removed." }, { "id": "Storage configuration {{.Configuration}} was successfully upgraded to the latest storage configuration version.", "translation": "Storage configuration {{.Configuration}} was successfully upgraded to the latest storage configuration version." }, { "id": "Strategy", "translation": "Strategy" }, { "id": "Subdomain", "translation": "Subdomain" }, { "id": "Subdomain mappings", "translation": "Subdomain mappings" }, { "id": "Subnet '{{.Subnet}}' not found.", "translation": "Subnet '{{.Subnet}}' not found." }, { "id": "Subnet CIDR", "translation": "Subnet CIDR" }, { "id": "Subnet VLANs", "translation": "Subnet VLANs" }, { "id": "Subnets", "translation": "Subnets" }, { "id": "Subscription", "translation": "Subscription" }, { "id": "Subscription Count", "translation": "Subscription Count" }, { "id": "Subscription {{.Subscription}} could not be removed.", "translation": "Subscription {{.Subscription}} could not be removed." }, { "id": "Subscription {{.Subscription}} could not be updated.", "translation": "Subscription {{.Subscription}} could not be updated." }, { "id": "Subscription {{.Subscription}} identity could not be updated.", "translation": "Subscription {{.Subscription}} identity could not be updated." }, { "id": "Subscription {{.Subscription}} identity was successfully updated.", "translation": "Subscription {{.Subscription}} identity was successfully updated." }, { "id": "Subscription {{.Subscription}} was successfully created with ID {{.ID}}.", "translation": "Subscription {{.Subscription}} was successfully created with ID {{.ID}}." }, { "id": "Subscription {{.Subscription}} was successfully removed.", "translation": "Subscription {{.Subscription}} was successfully removed." }, { "id": "Subscription {{.Subscription}} was successfully updated.", "translation": "Subscription {{.Subscription}} was successfully updated." }, { "id": "Subscriptions", "translation": "Subscriptions" }, { "id": "Supported Isolations", "translation": "Supported Isolations" }, { "id": "Supported Kubernetes Operating Systems", "translation": "Supported Kubernetes Operating Systems" }, { "id": "Supported Kubernetes Range", "translation": "Supported Kubernetes Range" }, { "id": "Supported OpenShift Range", "translation": "Supported OpenShift Range" }, { "id": "Supported Openshift Operating Systems", "translation": "Supported Openshift Operating Systems" }, { "id": "Supported for only Kubernetes clusters. Not supported for OpenShift clusters.", "translation": "Supported for only Kubernetes clusters. Not supported for OpenShift clusters." }, { "id": "Supports Virtual Workers", "translation": "Supports Virtual Workers" }, { "id": "TLS cert(s) provided for insecure remote server. Ignoring...", "translation": "TLS cert(s) provided for insecure remote server. Ignoring..." }, { "id": "Target(s)", "translation": "Target(s)" }, { "id": "Template Name", "translation": "Template Name" }, { "id": "Template Status", "translation": "Template Status" }, { "id": "Template Version", "translation": "Template Version" }, { "id": "Test ALB deleted", "translation": "Test ALB deleted" }, { "id": "Test secret", "translation": "Test secret" }, { "id": "Test subdomain", "translation": "Test subdomain" }, { "id": "Test subdomain unregistered", "translation": "Test subdomain unregistered" }, { "id": "The '--{{.FlagName}}' flag is required and {{.Restriction}}.", "translation": "The '--{{.FlagName}}' flag is required and {{.Restriction}}." }, { "id": "The '--{{.FlagName}}' flag is required.", "translation": "The '--{{.FlagName}}' flag is required." }, { "id": "The 'access_token' for the Akamai API Client Credentials.", "translation": "The 'access_token' for the Akamai API Client Credentials." }, { "id": "The 'client_secret' for the Akamai API Client Credentials.", "translation": "The 'client_secret' for the Akamai API Client Credentials." }, { "id": "The 'client_token' for the Akamai API Client Credentials.", "translation": "The 'client_token' for the Akamai API Client Credentials." }, { "id": "The '{{.Command}}' command is deprecated and will be removed.", "translation": "The '{{.Command}}' command is deprecated and will be removed." }, { "id": "The '{{.Flag}}' flag for the '{{.Command}}' command is deprecated and was removed.", "translation": "The '{{.Flag}}' flag for the '{{.Command}}' command is deprecated and was removed." }, { "id": "The ALB ID. To see available ALB IDs, run '{{.Command}}'.", "translation": "The ALB ID. To see available ALB IDs, run '{{.Command}}'." }, { "id": "The API endpoint for the service.", "translation": "The API endpoint for the service." }, { "id": "The API key of your IBM Cloud classic infrastructure account.", "translation": "The API key of your IBM Cloud classic infrastructure account." }, { "id": "The API token.", "translation": "The API token." }, { "id": "The Activity Tracker instance key.", "translation": "The Activity Tracker instance key." }, { "id": "The BookInfo sample application for Istio.", "translation": "The BookInfo sample application for Istio." }, { "id": "The CRN for the IBM CIS instance.", "translation": "The CRN for the IBM CIS instance." }, { "id": "The CRN of the IBM Cloud Secrets Manager instance.", "translation": "The CRN of the IBM Cloud Secrets Manager instance." }, { "id": "The Calico network config flag does not support YAML output. To retrieve the Calico network config, remove the --yaml flag and run the command again.", "translation": "The Calico network config flag does not support YAML output. To retrieve the Calico network config, remove the --yaml flag and run the command again." }, { "id": "The Container Scanner is no longer available. For more information, see {{.URL}}.", "translation": "The Container Scanner is no longer available. For more information, see {{.URL}}." }, { "id": "The DNS provider type for subdomain registration.", "translation": "The DNS provider type for subdomain registration." }, { "id": "The Fluentd pods in cluster {{.Cluster}} will be updated to the latest version.", "translation": "The Fluentd pods in cluster {{.Cluster}} will be updated to the latest version." }, { "id": "The IBM Cloud HPCS Router Operator add-on for Red Hat OpenShift on IBM Cloud.", "translation": "The IBM Cloud HPCS Router Operator add-on for Red Hat OpenShift on IBM Cloud." }, { "id": "The IBM Cloud Image Key Synchronizer add-on.", "translation": "The IBM Cloud Image Key Synchronizer add-on." }, { "id": "The IBM Cloud Kubernetes Service ALB OAuth Proxy add-on.", "translation": "The IBM Cloud Kubernetes Service ALB OAuth Proxy add-on." }, { "id": "The IBM Cloud Kubernetes Service Cluster Autoscaler.", "translation": "The IBM Cloud Kubernetes Service Cluster Autoscaler." }, { "id": "The IBM Cloud Kubernetes Service Diagnostics and Debug Tool.", "translation": "The IBM Cloud Kubernetes Service Diagnostics and Debug Tool." }, { "id": "The IBM Cloud Kubernetes Service static route add-on.", "translation": "The IBM Cloud Kubernetes Service static route add-on." }, { "id": "The IBM Cloud Kubernetes Service web terminal.", "translation": "The IBM Cloud Kubernetes Service web terminal." }, { "id": "The IBM Cloud Object Storage CSI Driver.", "translation": "The IBM Cloud Object Storage CSI Driver." }, { "id": "The IBM Cloud Storage operator add-on.", "translation": "The IBM Cloud Storage operator add-on." }, { "id": "The IBM Cloud VPC Block Storage CSI Driver.", "translation": "The IBM Cloud VPC Block Storage CSI Driver." }, { "id": "The IBM Cloud VPC File Storage CSI Driver.", "translation": "The IBM Cloud VPC File Storage CSI Driver." }, { "id": "The IBM Cloud Worker Node Recovery add-on.", "translation": "The IBM Cloud Worker Node Recovery add-on." }, { "id": "The IBM Cloud account ID with the instance of IBM Log Analysis with LogDNA that you want to forward your Satellite logs to. This option is available only in select environments.", "translation": "The IBM Cloud account ID with the instance of IBM Log Analysis with LogDNA that you want to forward your Satellite logs to. This option is available only in select environments." }, { "id": "The IBM Cloud password.", "translation": "The IBM Cloud password." }, { "id": "The IBM Cloud region to manage your Satellite connector.", "translation": "The IBM Cloud region to manage your Satellite connector." }, { "id": "The IBM Cloud service catalog.", "translation": "The IBM Cloud service catalog." }, { "id": "The IBM Cloud user ID.", "translation": "The IBM Cloud user ID." }, { "id": "The ID of Satellite connector.", "translation": "The ID of Satellite connector." }, { "id": "The ID of a Satellite connector.", "translation": "The ID of a Satellite connector." }, { "id": "The ID of a Satellite storage assignment. To list available storage assignments of the configuration, run 'ibmcloud sat storage assignment ls --config CONFIG'.", "translation": "The ID of a Satellite storage assignment. To list available storage assignments of the configuration, run 'ibmcloud sat storage assignment ls --config CONFIG'." }, { "id": "The ID of the KMS instance to use for local disk encryption. To list available KMS instances, run 'ibmcloud ks kms instance ls'.", "translation": "The ID of the KMS instance to use for local disk encryption. To list available KMS instances, run 'ibmcloud ks kms instance ls'." }, { "id": "The ID of the Satellite connector. To find the connector ID, run 'ibmcloud sat experimental connector ls'.", "translation": "The ID of the Satellite connector. To find the connector ID, run 'ibmcloud sat experimental connector ls'." }, { "id": "The ID of the VPC in which to create the worker nodes, which must match the VPC that the cluster is in. To list the cluster's VPC ID, run 'ibmcloud ks cluster get -c '. If this flag is not provided, then the worker pool defaults to the VPC ID of existing worker pools in the cluster.", "translation": "The ID of the VPC in which to create the worker nodes, which must match the VPC that the cluster is in. To list the cluster's VPC ID, run 'ibmcloud ks cluster get -c '. If this flag is not provided, then the worker pool defaults to the VPC ID of existing worker pools in the cluster." }, { "id": "The ID of the VPC in which to create the worker nodes. To list available IDs, run 'ibmcloud ks vpcs'.", "translation": "The ID of the VPC in which to create the worker nodes. To list available IDs, run 'ibmcloud ks vpcs'." }, { "id": "The ID of the account that contains the KMS instance you want to use for local disk or secret encryption.", "translation": "The ID of the account that contains the KMS instance you want to use for local disk or secret encryption." }, { "id": "The ID of the dedicated host pool to add the dedicated host to. To list available dedicated host pools, run 'ibmcloud ks dedicated pool ls'.", "translation": "The ID of the dedicated host pool to add the dedicated host to. To list available dedicated host pools, run 'ibmcloud ks dedicated pool ls'." }, { "id": "The ID of the dedicated host pool to run your workers.", "translation": "The ID of the dedicated host pool to run your workers." }, { "id": "The ID of the dedicated host pool. To list available dedicated host pools, run 'ibmcloud ks dedicated pool ls'.", "translation": "The ID of the dedicated host pool. To list available dedicated host pools, run 'ibmcloud ks dedicated pool ls'." }, { "id": "The ID of the dedicated host. To list available dedicated hosts, run 'ibmcloud ks dedicated host ls'.", "translation": "The ID of the dedicated host. To list available dedicated hosts, run 'ibmcloud ks dedicated host ls'." }, { "id": "The ID of the dedicated host. To list available dedicated hosts, run 'ibmcloud ks dedicated host ls'. ", "translation": "The ID of the dedicated host. To list available dedicated hosts, run 'ibmcloud ks dedicated host ls'. " }, { "id": "The ID of the root key in your KMS instance to use for local disk encryption. To list available root keys, run 'ibmcloud ks kms crk ls --instance-id '.", "translation": "The ID of the root key in your KMS instance to use for local disk encryption. To list available root keys, run 'ibmcloud ks kms crk ls --instance-id '." }, { "id": "The IP address ranges of your load balancers in CIDR format. PROXY headers that are forwarded by load balancers in other IP ranges are not processed.", "translation": "The IP address ranges of your load balancers in CIDR format. PROXY headers that are forwarded by load balancers in other IP ranges are not processed." }, { "id": "The IP addresses to register for the domain.", "translation": "The IP addresses to register for the domain." }, { "id": "The Ingress domain. To see existing domains, run '{{.Command}}'.", "translation": "The Ingress domain. To see existing domains, run '{{.Command}}'." }, { "id": "The Ingress secret type. Can be TLS or Opaque. If no option is specified, TLS is applied by default.", "translation": "The Ingress secret type. Can be TLS or Opaque. If no option is specified, TLS is applied by default." }, { "id": "The Knative serverless framework.", "translation": "The Knative serverless framework." }, { "id": "The Kubernetes namespace from which you want to filter logs.", "translation": "The Kubernetes namespace from which you want to filter logs." }, { "id": "The Kubernetes namespace. Will use the 'default' namespace if not specified.", "translation": "The Kubernetes namespace. Will use the 'default' namespace if not specified." }, { "id": "The Kubernetes resource ID.", "translation": "The Kubernetes resource ID." }, { "id": "The Red Hat OpenShift Container Storage on IBM Cloud add-on", "translation": "The Red Hat OpenShift Container Storage on IBM Cloud add-on" }, { "id": "The Red Hat OpenShift Data Foundation on IBM Cloud add-on", "translation": "The Red Hat OpenShift Data Foundation on IBM Cloud add-on" }, { "id": "The Red Hat OpenShift on IBM Cloud version, including at least the major.minor version. To see available versions, run 'ibmcloud ks versions'.", "translation": "The Red Hat OpenShift on IBM Cloud version, including at least the major.minor version. To see available versions, run 'ibmcloud ks versions'." }, { "id": "The Satellite Storage template version is deprecated.", "translation": "The Satellite Storage template version is deprecated." }, { "id": "The Satellite Storage template version is unsupported.", "translation": "The Satellite Storage template version is unsupported." }, { "id": "The Satellite host ID. To find the host ID, run 'ibmcloud sat host ls '.", "translation": "The Satellite host ID. To find the host ID, run 'ibmcloud sat host ls '." }, { "id": "The Secret Group ID of the IBM Cloud Secrets Manager instance where your secrets are persisted.", "translation": "The Secret Group ID of the IBM Cloud Secrets Manager instance where your secrets are persisted." }, { "id": "The URL or IP address for the remote logging service.", "translation": "The URL or IP address for the remote logging service." }, { "id": "The VLAN ID. This VLAN must match the ALB 'type' and must be in the same 'zone' as the ALB that you want to create.", "translation": "The VLAN ID. This VLAN must match the ALB 'type' and must be in the same 'zone' as the ALB that you want to create." }, { "id": "The VPC infrastructure provider type. Supported values are 'vpc-classic' and 'vpc-gen2'. By default, VPCs of all provider types are returned.", "translation": "The VPC infrastructure provider type. Supported values are 'vpc-classic' and 'vpc-gen2'. By default, VPCs of all provider types are returned." }, { "id": "The VPC load balancer host name. To see load balancer host names, run '{{.Command}}'.", "translation": "The VPC load balancer host name. To see load balancer host names, run '{{.Command}}'." }, { "id": "The VPC load balancer type.", "translation": "The VPC load balancer type." }, { "id": "The VPC subnet to assign the cluster. To list available subnets, run 'ibmcloud ks subnets --provider vpc-classic --vpc-id --zone '.", "translation": "The VPC subnet to assign the cluster. To list available subnets, run 'ibmcloud ks subnets --provider vpc-classic --vpc-id --zone '." }, { "id": "The VPC subnet to assign the cluster. To list available subnets, run 'ibmcloud ks subnets --provider vpc-gen2 --vpc-id --zone '.", "translation": "The VPC subnet to assign the cluster. To list available subnets, run 'ibmcloud ks subnets --provider vpc-gen2 --vpc-id --zone '." }, { "id": "The ZoneID for CIS.", "translation": "The ZoneID for CIS." }, { "id": "The add-on might take several minutes to deploy and become ready for use.", "translation": "The add-on might take several minutes to deploy and become ready for use." }, { "id": "The add-on name or ID.", "translation": "The add-on name or ID." }, { "id": "The assignment you specified could not be found. Verify your inputs and retry the request. To list your storage assignments, run '{{.Command}}'.", "translation": "The assignment you specified could not be found. Verify your inputs and retry the request. To list your storage assignments, run '{{.Command}}'." }, { "id": "The certificate CRN format is not proper. Check the IBM Cloud Certificate Manager service to make sure the certificate CRN is accurate.", "translation": "The certificate CRN format is not proper. Check the IBM Cloud Certificate Manager service to make sure the certificate CRN is accurate." }, { "id": "The certificate CRN.", "translation": "The certificate CRN." }, { "id": "The client certificate used to authenticate with the destination server. For example 'myCert.pem'.", "translation": "The client certificate used to authenticate with the destination server. For example 'myCert.pem'." }, { "id": "The client is not yet configured. Run '{{.Command}}'.", "translation": "The client is not yet configured. Run '{{.Command}}'." }, { "id": "The client private key used to encrypt the client certificate. For example 'myKey.pem'.", "translation": "The client private key used to encrypt the client certificate. For example 'myKey.pem'." }, { "id": "The cluster Kubernetes version is deprecated and will be unsupported in {{.DaysToEOS}} days.", "translation": "The cluster Kubernetes version is deprecated and will be unsupported in {{.DaysToEOS}} days." }, { "id": "The cluster Kubernetes version is deprecated. For more information, run '{{.Command}}'", "translation": "The cluster Kubernetes version is deprecated. For more information, run '{{.Command}}'" }, { "id": "The cluster Kubernetes version is no longer supported. Manual intervention might be required.", "translation": "The cluster Kubernetes version is no longer supported. Manual intervention might be required." }, { "id": "The cluster has no secrets.", "translation": "The cluster has no secrets." }, { "id": "The configuration for {{.Cluster}} was downloaded successfully.", "translation": "The configuration for {{.Cluster}} was downloaded successfully." }, { "id": "The configuration you specified could not be found. Verify your inputs and retry the request. To list your storage configurations, run '{{.Command}}'.", "translation": "The configuration you specified could not be found. Verify your inputs and retry the request. To list your storage configurations, run '{{.Command}}'." }, { "id": "The current config is at lower revision. Revision upgrade is available. Upgrade to the latest revision. For more info, run 'ibmcloud sat storage config get' command.", "translation": "The current config is at lower revision. Revision upgrade is available. Upgrade to the latest revision. For more info, run 'ibmcloud sat storage config get' command." }, { "id": "The destination TLS mode.", "translation": "The destination TLS mode." }, { "id": "The endpoint could not be accessed. Try again later.", "translation": "The endpoint could not be accessed. Try again later." }, { "id": "The endpoint path to health check against. This flag is valid only for type 'HTTP' or 'HTTPS'. Default: '/' ", "translation": "The endpoint path to health check against. This flag is valid only for type 'HTTP' or 'HTTPS'. Default: '/' " }, { "id": "The endpoint that the link agent uses to connect to the link tunnel server.", "translation": "The endpoint that the link agent uses to connect to the link tunnel server." }, { "id": "The external DNS provider type. The default is 'akamai'.", "translation": "The external DNS provider type. The default is 'akamai'." }, { "id": "The field is not formatted correctly. Check the formatting and try again.", "translation": "The field is not formatted correctly. Check the formatting and try again." }, { "id": "The file size exceeds the limit: ", "translation": "The file size exceeds the limit: " }, { "id": "The filepath for the client cert that is used to authenticate against the remote logging service.", "translation": "The filepath for the client cert that is used to authenticate against the remote logging service." }, { "id": "The filepath for the corresponding client key that is used to connect to the remote logging service.", "translation": "The filepath for the corresponding client key that is used to connect to the remote logging service." }, { "id": "The filepath of a custom PodSecurity configuration. If not specified, the Kubernetes defaults are applied. For more information, see https://ibm.biz/BdPtUB", "translation": "The filepath of a custom PodSecurity configuration. If not specified, the Kubernetes defaults are applied. For more information, see https://ibm.biz/BdPtUB" }, { "id": "The filepath of the CA cert used to verify the remote logging service.", "translation": "The filepath of the CA cert used to verify the remote logging service." }, { "id": "The flavor class of the dedicated host pool. To see allowed options, run 'ibmcloud ks dedicated flavors --zone --provider '.", "translation": "The flavor class of the dedicated host pool. To see allowed options, run 'ibmcloud ks dedicated flavors --zone --provider '." }, { "id": "The flavor of a worker node. To see available flavors, run '{{.CommandGeneral}}' (for public IBM Cloud accounts) or '{{.CommandDedicated}}' (for IBM Cloud Dedicated accounts).", "translation": "The flavor of a worker node. To see available flavors, run '{{.CommandGeneral}}' (for public IBM Cloud accounts) or '{{.CommandDedicated}}' (for IBM Cloud Dedicated accounts)." }, { "id": "The flavor of the dedicated host.", "translation": "The flavor of the dedicated host." }, { "id": "The flavor of the worker node. To see available flavors, run '{{.CommandGeneral}}' (for public IBM Cloud accounts) or '{{.CommandDedicated}}' (for IBM Cloud Dedicated accounts).", "translation": "The flavor of the worker node. To see available flavors, run '{{.CommandGeneral}}' (for public IBM Cloud accounts) or '{{.CommandDedicated}}' (for IBM Cloud Dedicated accounts)." }, { "id": "The following entry is not a valid key value pair: '{{.FailedKeyValue}}'. Use '{{.Format}}' as the format to specify key value pairs.", "translation": "The following entry is not a valid key value pair: '{{.FailedKeyValue}}'. Use '{{.Format}}' as the format to specify key value pairs." }, { "id": "The history ID for the resource.", "translation": "The history ID for the resource." }, { "id": "The host for the Akamai API Client Credentials.", "translation": "The host for the Akamai API Client Credentials." }, { "id": "The host name. To see existing host names, run '{{.Command}}'.", "translation": "The host name. To see existing host names, run '{{.Command}}'." }, { "id": "The input file contains invalid utf8 characters.", "translation": "The input file contains invalid utf8 characters." }, { "id": "The interval, in seconds, between each health check. Short intervals might improve failover time but increase load on the IPs. The value must be greater than ('retries_value' + 1) * 'timeout_value', and must be in the range [10, 3600]. Default: '60'", "translation": "The interval, in seconds, between each health check. Short intervals might improve failover time but increase load on the IPs. The value must be greater than ('retries_value' + 1) * 'timeout_value', and must be in the range [10, 3600]. Default: '60'" }, { "id": "The key indicated in the annotation was already absent", "translation": "The key indicated in the annotation was already absent" }, { "id": "The kind of log source you want to filter for. Accepted values are 'container', 'application', 'ingress', 'worker', 'storage' and 'kubernetes'. If you do not pass a log source, all logging configurations for the cluster are returned.", "translation": "The kind of log source you want to filter for. Accepted values are 'container', 'application', 'ingress', 'worker', 'storage' and 'kubernetes'. If you do not pass a log source, all logging configurations for the cluster are returned." }, { "id": "The level of hardware isolation for your worker node. 'public' allows physical resources to be shared with other IBM customers.", "translation": "The level of hardware isolation for your worker node. 'public' allows physical resources to be shared with other IBM customers." }, { "id": "The level of hardware isolation for your worker node. Use 'dedicated' to have available physical resources dedicated to you only, or 'shared' to allow physical resources to be shared with other IBM customers. For IBM Cloud Public accounts, the default value is shared. For IBM Cloud Dedicated accounts, dedicated is the only available option.", "translation": "The level of hardware isolation for your worker node. Use 'dedicated' to have available physical resources dedicated to you only, or 'shared' to allow physical resources to be shared with other IBM customers. For IBM Cloud Public accounts, the default value is shared. For IBM Cloud Dedicated accounts, dedicated is the only available option." }, { "id": "The log forwarding protocol that you want to use. The only supported value is 'syslog'.", "translation": "The log forwarding protocol that you want to use. The only supported value is 'syslog'." }, { "id": "The logging filter is already covered by another filter or filters.", "translation": "The logging filter is already covered by another filter or filters." }, { "id": "The logging instance key.", "translation": "The logging instance key." }, { "id": "The managed Istio service mesh.", "translation": "The managed Istio service mesh." }, { "id": "The maximum replicas for the given ALB. Ensure you have enough workers.", "translation": "The maximum replicas for the given ALB. Ensure you have enough workers." }, { "id": "The method for selecting the node network interface for the internal pod network. This option can be used only if the Satellite location that you specify has Red Hat CoreOS enabled. To provide a direct URL or IP address, specify `can-reach=` or `can-reach=`. To choose a network interface, specify 'interface='.", "translation": "The method for selecting the node network interface for the internal pod network. This option can be used only if the Satellite location that you specify has Red Hat CoreOS enabled. To provide a direct URL or IP address, specify `can-reach=` or `can-reach=`. To choose a network interface, specify 'interface='." }, { "id": "The method for selecting the node network interface for the internal pod network. This option can be used only if you also enable Red Hat CoreOS with the '--coreos-enabled' option. To provide a direct URL or IP address, specify `can-reach=` or `can-reach=`. To choose a network interface, specify 'interface='.", "translation": "The method for selecting the node network interface for the internal pod network. This option can be used only if you also enable Red Hat CoreOS with the '--coreos-enabled' option. To provide a direct URL or IP address, specify `can-reach=` or `can-reach=`. To choose a network interface, specify 'interface='." }, { "id": "The method to use for the health check. Default for HTTP and HTTPS: 'GET'. Default for TCP: 'connection_established'", "translation": "The method to use for the health check. Default for HTTP and HTTPS: 'GET'. Default for TCP: 'connection_established'" }, { "id": "The metro to create the dedicated host pool in, such as 'dal' or 'wdc'.", "translation": "The metro to create the dedicated host pool in, such as 'dal' or 'wdc'." }, { "id": "The minimum replicas for the given ALB. Must be greater or equal to 1. (Recommended minimum is 2 for high availability purposes.)", "translation": "The minimum replicas for the given ALB. Must be greater or equal to 1. (Recommended minimum is 2 for high availability purposes.)" }, { "id": "The name for the ACL.", "translation": "The name for the ACL." }, { "id": "The name for the Satellite connector.", "translation": "The name for the Satellite connector." }, { "id": "The name of the ALB certificate secret must consist of lower case alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character. ALB certificate secret name cannot be more than 63 characters long.", "translation": "The name of the ALB certificate secret must consist of lower case alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character. ALB certificate secret name cannot be more than 63 characters long." }, { "id": "The name of the Satellite Mesh instance.", "translation": "The name of the Satellite Mesh instance." }, { "id": "The name of the container from which you want to filter out logs. This flag applies only when you are using log type container.", "translation": "The name of the container from which you want to filter out logs. This flag applies only when you are using log type container." }, { "id": "The name of the dedicated host pool.", "translation": "The name of the dedicated host pool." }, { "id": "The name of the field to remove from the secret.", "translation": "The name of the field to remove from the secret." }, { "id": "The name of the new Satellite Config key.", "translation": "The name of the new Satellite Config key." }, { "id": "The name of the registered IBM Cloud Secret Manager instance.", "translation": "The name of the registered IBM Cloud Secret Manager instance." }, { "id": "The name of the secret must consist of lower case alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character. The secret name cannot be more than 63 characters long.", "translation": "The name of the secret must consist of lower case alphanumeric characters, '-' or '.', and must start and end with an alphanumeric character. The secret name cannot be more than 63 characters long." }, { "id": "The name of the worker pool to modify. To specify multiple worker pools, use multiple flags, such as '-p pool1 -p pool2'.", "translation": "The name of the worker pool to modify. To specify multiple worker pools, use multiple flags, such as '-p pool1 -p pool2'." }, { "id": "The name or ID of a Satellite Config key.", "translation": "The name or ID of a Satellite Config key." }, { "id": "The name or ID of a Satellite storage configuration. To list available storage configurations, run 'ibmcloud sat storage config ls'.", "translation": "The name or ID of a Satellite storage configuration. To list available storage configurations, run 'ibmcloud sat storage config ls'." }, { "id": "The name or ID of the Satellite Mesh instance.", "translation": "The name or ID of the Satellite Mesh instance." }, { "id": "The name or ID of the Satellite location.", "translation": "The name or ID of the Satellite location." }, { "id": "The name or ID of the Satellite location. To find the location ID or name, run 'ibmcloud sat location ls'.", "translation": "The name or ID of the Satellite location. To find the location ID or name, run 'ibmcloud sat location ls'." }, { "id": "The name or ID of the cluster to assign the host to. To list available clusters, run 'ibmcloud sat cluster ls'. If no cluster is provided, the host is automatically assigned to the Satellite control plane.", "translation": "The name or ID of the cluster to assign the host to. To list available clusters, run 'ibmcloud sat cluster ls'. If no cluster is provided, the host is automatically assigned to the Satellite control plane." }, { "id": "The name or ID of the host to assign. To automatically assign hosts based on labels, do not include this option.", "translation": "The name or ID of the host to assign. To automatically assign hosts based on labels, do not include this option." }, { "id": "The name or ID of the host to assign. To automatically assign hosts based on labels, do not include this option. To retrieve the host ID, run 'ibmcloud sat host ls --location '.", "translation": "The name or ID of the host to assign. To automatically assign hosts based on labels, do not include this option. To retrieve the host ID, run 'ibmcloud sat host ls --location '." }, { "id": "The name or ID of the host to remove.", "translation": "The name or ID of the host to remove." }, { "id": "The name or ID of the worker pool within the cluster to assign the host. If no worker pool is specified, the host is assigned to the default worker pool.", "translation": "The name or ID of the worker pool within the cluster to assign the host. If no worker pool is specified, the host is assigned to the default worker pool." }, { "id": "The name or ID of the zone to assign the host. To find available zones, run 'ibmcloud sat location get --location ' and look for the 'Host Zones' field.", "translation": "The name or ID of the zone to assign the host. To find available zones, run 'ibmcloud sat location get --location ' and look for the 'Host Zones' field." }, { "id": "The name or ID of the zone to associate the host. You cannot change the zone of hosts that are assigned to a resource, such as a cluster. You must unassign them first. To list available zones, run 'ibmcloud sat location get --location '.", "translation": "The name or ID of the zone to associate the host. You cannot change the zone of hosts that are assigned to a resource, such as a cluster. You must unassign them first. To list available zones, run 'ibmcloud sat location get --location '." }, { "id": "The namespace that the SSL secret is created in. If this flag is not specified, the secret is created in 'default.'", "translation": "The namespace that the SSL secret is created in. If this flag is not specified, the secret is created in 'default.'" }, { "id": "The namespace that the TLS secret is created in.", "translation": "The namespace that the TLS secret is created in." }, { "id": "The namespace value is ignored because it is not supported by the logsource.", "translation": "The namespace value is ignored because it is not supported by the logsource." }, { "id": "The namespace you want to apply the log forwarding configuration to. Only use this flag with the 'container' log source or if you do not specify a log source. If you do not specify a namespace, then all namespaces use this configuration.", "translation": "The namespace you want to apply the log forwarding configuration to. Only use this flag with the 'container' log source or if you do not specify a log source. If you do not specify a namespace, then all namespaces use this configuration." }, { "id": "The namespace you want to remove the log forwarding configuration from. If there is more than one config for the same namespace, use the '{{.Flag}}' flag instead.", "translation": "The namespace you want to remove the log forwarding configuration from. If there is more than one config for the same namespace, use the '{{.Flag}}' flag instead." }, { "id": "The new Satellite Mesh version.", "translation": "The new Satellite Mesh version." }, { "id": "The new name for the ACL.", "translation": "The new name for the ACL." }, { "id": "The number of cluster worker nodes. Defaults to {{.WorkerNum}}.", "translation": "The number of cluster worker nodes. Defaults to {{.WorkerNum}}." }, { "id": "The number of worker nodes per zone in the default worker pool. For OpenShift clusters, you must set this value to at least 2. For Kubernetes clusters, this value is optional.", "translation": "The number of worker nodes per zone in the default worker pool. For OpenShift clusters, you must set this value to at least 2. For Kubernetes clusters, this value is optional." }, { "id": "The number of worker nodes per zone in the default worker pool. Required when '--host-label' is specified.", "translation": "The number of worker nodes per zone in the default worker pool. Required when '--host-label' is specified." }, { "id": "The operating system of the hosts you want to attach to your location. To attach RHCOS hosts, your location must be RHCOS enabled.", "translation": "The operating system of the hosts you want to attach to your location. To attach RHCOS hosts, your location must be RHCOS enabled." }, { "id": "The option to add a worker by specifying a YAML file in the {{.Flag}} flag is deprecated. Instead, specify values for your worker in the supported flags for this command.", "translation": "The option to add a worker by specifying a YAML file in the {{.Flag}} flag is deprecated. Instead, specify values for your worker in the supported flags for this command." }, { "id": "The option to create a cluster by specifying a YAML file in the {{.Flag}} flag is deprecated. Instead, specify values for your cluster in the supported flags for this command.", "translation": "The option to create a cluster by specifying a YAML file in the {{.Flag}} flag is deprecated. Instead, specify values for your cluster in the supported flags for this command." }, { "id": "The org name to send logs to. This flag is only valid when the logging type is 'ibm'. The org name is required when you specify a space name. If you do not specify a space name, then logs are forwarded at the account level.", "translation": "The org name to send logs to. This flag is only valid when the logging type is 'ibm'. The org name is required when you specify a space name. If you do not specify a space name, then logs are forwarded at the account level." }, { "id": "The physical address of the Satellite location.", "translation": "The physical address of the Satellite location." }, { "id": "The platform for the Satellite connector agent. For more information about Docker, see documentation at {{.ProdDockerURL}}", "translation": "The platform for the Satellite connector agent. For more information about Docker, see documentation at {{.ProdDockerURL}}" }, { "id": "The port number to connect to for the health check. When type is TCP, this flag is required. When type is HTTP or HTTPS, use this flag only for ports other than 80 for HTTP or 443 for HTTPS. HTTP default: '80'. HTTPS default: '443'.", "translation": "The port number to connect to for the health check. When type is TCP, this flag is required. When type is HTTP or HTTPS, use this flag only for ports other than 80 for HTTP or 443 for HTTPS. HTTP default: '80'. HTTPS default: '443'." }, { "id": "The port of the log collector. If you do not specify a port, the default port for the ingestion endpoint is used for 'ibm' (deprecated) and '514' is used for 'syslog'.", "translation": "The port of the log collector. If you do not specify a port, the default port for the ingestion endpoint is used for 'ibm' (deprecated) and '514' is used for 'syslog'." }, { "id": "The protocol to use for the health check.", "translation": "The protocol to use for the health check." }, { "id": "The provider to use to search for dedicated host flavors.", "translation": "The provider to use to search for dedicated host flavors." }, { "id": "The provider type to get the flavors for.", "translation": "The provider type to get the flavors for." }, { "id": "The replacement worker node is created in the same zone with the same flavor, but gets new public or private IP addresses. During the replacement, all pods might be rescheduled onto other worker nodes and data is deleted if not stored outside the pod. To avoid downtime, ensure that you have enough worker nodes to handle your workload while the selected worker nodes are being replaced.", "translation": "The replacement worker node is created in the same zone with the same flavor, but gets new public or private IP addresses. During the replacement, all pods might be rescheduled onto other worker nodes and data is deleted if not stored outside the pod. To avoid downtime, ensure that you have enough worker nodes to handle your workload while the selected worker nodes are being replaced." }, { "id": "The script to attach hosts to Satellite location '{{.Controller}}' was downloaded to the following location:", "translation": "The script to attach hosts to Satellite location '{{.Controller}}' was downloaded to the following location:" }, { "id": "The secondary storage option for the flavor. To view the secondary storage options that are available for a flavor, run '{{.Command}}'.", "translation": "The secondary storage option for the flavor. To view the secondary storage options that are available for a flavor, run '{{.Command}}'." }, { "id": "The secret CRN to include as a field. To pull in the secret without specifying the name, use '--field '. To specify the field name, use '--field name='. To use the IBM Cloud Secrets Manager secret as the prefix, use '--field prefix='.", "translation": "The secret CRN to include as a field. To pull in the secret without specifying the name, use '--field '. To specify the field name, use '--field name='. To use the IBM Cloud Secrets Manager secret as the prefix, use '--field prefix='." }, { "id": "The server URL to use for the cluster context. If you do not include this flag, the default cluster service endpoint is used. For more info, see {{.IKSURL}} for Kubernetes or {{.ROKSURL}} for OpenShift clusters.", "translation": "The server URL to use for the cluster context. If you do not include this flag, the default cluster service endpoint is used. For more info, see {{.IKSURL}} for Kubernetes or {{.ROKSURL}} for OpenShift clusters." }, { "id": "The server certificate to present to the source client. For example 'myCert.pem'.", "translation": "The server certificate to present to the source client. For example 'myCert.pem'." }, { "id": "The server private key used to encrypt the server certificate. For example 'myKey.pem'.", "translation": "The server private key used to encrypt the server certificate. For example 'myKey.pem'." }, { "id": "The service key could not be found or did not match the format for a key created by bind and will not be deleted.", "translation": "The service key could not be found or did not match the format for a key created by bind and will not be deleted." }, { "id": "The service key was not created by bind so it will not be deleted.", "translation": "The service key was not created by bind so it will not be deleted." }, { "id": "The service key was not deleted as it is bound to another namespace.", "translation": "The service key was not deleted as it is bound to another namespace." }, { "id": "The size of the portable subnet requested to be created is invalid. It should be one of {{.SizeList}}.", "translation": "The size of the portable subnet requested to be created is invalid. It should be one of {{.SizeList}}." }, { "id": "The source TLS mode.", "translation": "The source TLS mode." }, { "id": "The source of the logs to forward. Supported values are 'container', 'application', 'ingress', 'worker', 'storage', and 'kubernetes'. This argument supports a comma separated list of log sources. If you do not provide a log source, logs for 'container' and 'ingress' are forwarded.", "translation": "The source of the logs to forward. Supported values are 'container', 'application', 'ingress', 'worker', 'storage', and 'kubernetes'. This argument supports a comma separated list of log sources. If you do not provide a log source, logs for 'container' and 'ingress' are forwarded." }, { "id": "The space name to send logs to. This flag is only valid when the logging type is 'ibm'. The space name is required when you specify an org name. If you do not specify a space name, then logs are forwarded at the account level.", "translation": "The space name to send logs to. This flag is only valid when the logging type is 'ibm'. The space name is required when you specify an org name. If you do not specify a space name, then logs are forwarded at the account level." }, { "id": "The storage class is not found in the configuration. To see the storage classes in a configuration, run '{{.Command}}'.", "translation": "The storage class is not found in the configuration. To see the storage classes in a configuration, run '{{.Command}}'." }, { "id": "The storage class name does not match the name that you specified in the storage class parameters.", "translation": "The storage class name does not match the name that you specified in the storage class parameters." }, { "id": "The subdomain. To see existing subdomains, run '{{.Command}}'.", "translation": "The subdomain. To see existing subdomains, run '{{.Command}}'." }, { "id": "The timeout, in seconds, before the IP is considered unhealthy. Must be in the range [1, 15]. Default: '5'", "translation": "The timeout, in seconds, before the IP is considered unhealthy. Must be in the range [1, 15]. Default: '5'" }, { "id": "The type of logs that you want to apply the filter to. Currently all, container, and host are supported.", "translation": "The type of logs that you want to apply the filter to. Currently all, container, and host are supported." }, { "id": "The type of webhook that you want to use. Currently 'slack' is supported.", "translation": "The type of webhook that you want to use. Currently 'slack' is supported." }, { "id": "The upgrade is underway for Satellite Mesh Instance with ID {{.ID}} and name {{.Name}}.", "translation": "The upgrade is underway for Satellite Mesh Instance with ID {{.ID}} and name {{.Name}}." }, { "id": "The upgrade to version {{.Version}} is underway for Satellite Mesh Instance with ID {{.ID}} and name {{.Name}}.", "translation": "The upgrade to version {{.Version}} is underway for Satellite Mesh Instance with ID {{.ID}} and name {{.Name}}." }, { "id": "The user name of your IBM Cloud classic infrastructure account.", "translation": "The user name of your IBM Cloud classic infrastructure account." }, { "id": "The value of {{.PortFlag}} must be a positive integer between '0' and '65535'.", "translation": "The value of {{.PortFlag}} must be a positive integer between '0' and '65535'." }, { "id": "The value of {{.RetriesFlag}} must be a positive integer.", "translation": "The value of {{.RetriesFlag}} must be a positive integer." }, { "id": "The value of {{.TimeoutFlag}} must be a positive integer.", "translation": "The value of {{.TimeoutFlag}} must be a positive integer." }, { "id": "The value specified for the '--{{.FlagName}}' option is invalid.", "translation": "The value specified for the '--{{.FlagName}}' option is invalid." }, { "id": "The value specified for the '--{{.FlagName}}' option must be less than 256 characters.", "translation": "The value specified for the '--{{.FlagName}}' option must be less than 256 characters." }, { "id": "The version of the CLI to update a script to.", "translation": "The version of the CLI to update a script to." }, { "id": "The version of this add-on is no longer supported. To update your add-on, see {{.URL}}", "translation": "The version of this add-on is no longer supported. To update your add-on, see {{.URL}}" }, { "id": "The webhook URL.", "translation": "The webhook URL." }, { "id": "The worker pool '{{.Pool}}' could not be found.", "translation": "The worker pool '{{.Pool}}' could not be found." }, { "id": "The zone for the default worker pool in a multizone cluster. To list zones for your location, run 'ibmcloud sat location get'.", "translation": "The zone for the default worker pool in a multizone cluster. To list zones for your location, run 'ibmcloud sat location get'." }, { "id": "The zone is updated for worker pools {{.Pools}}.", "translation": "The zone is updated for worker pools {{.Pools}}." }, { "id": "The zone to create the dedicated host in.", "translation": "The zone to create the dedicated host in." }, { "id": "The zone to operate in.", "translation": "The zone to operate in." }, { "id": "The zone to search for dedicated host flavors.", "translation": "The zone to search for dedicated host flavors." }, { "id": "The zone was not added to the following worker pools: {{.FailedPoolList}}", "translation": "The zone was not added to the following worker pools: {{.FailedPoolList}}" }, { "id": "The zone was removed from worker pools {{.Pools}}.", "translation": "The zone was removed from worker pools {{.Pools}}." }, { "id": "The zone where you want to create the ALB.", "translation": "The zone where you want to create the ALB." }, { "id": "The {{.Dependency}} add-on version {{.Version}} is required to enable the {{.Addon}} add-on. Enable {{.Dependency}}?", "translation": "The {{.Dependency}} add-on version {{.Version}} is required to enable the {{.Addon}} add-on. Enable {{.Dependency}}?" }, { "id": "The {{.Dependency}} add-on version {{.Version}} is required to update the {{.Addon}} add-on. Update {{.Dependency}}?", "translation": "The {{.Dependency}} add-on version {{.Version}} is required to update the {{.Addon}} add-on. Update {{.Dependency}}?" }, { "id": "The {{.EntityType}} Kubernetes version is deprecated and will be unsupported in {{.DaysToEOS}} days.", "translation": "The {{.EntityType}} Kubernetes version is deprecated and will be unsupported in {{.DaysToEOS}} days." }, { "id": "The {{.Flag}} flag is not supported for VPC clusters.", "translation": "The {{.Flag}} flag is not supported for VPC clusters." }, { "id": "The {{.InstanceType}} Kubernetes version is deprecated. For more information, run '{{.Command}}'", "translation": "The {{.InstanceType}} Kubernetes version is deprecated. For more information, run '{{.Command}}'" }, { "id": "The {{.InstanceType}} Kubernetes version is no longer supported.", "translation": "The {{.InstanceType}} Kubernetes version is no longer supported." }, { "id": "The {{.Message}} and {{.RegexMessage}} flags are exclusive. Choose only one of these flags.", "translation": "The {{.Message}} and {{.RegexMessage}} flags are exclusive. Choose only one of these flags." }, { "id": "There are currently no active messages.", "translation": "There are currently no active messages." }, { "id": "There was an issue creating the service key, verify that the service instance: {{.SRV_INSTANCE}}", "translation": "There was an issue creating the service key, verify that the service instance: {{.SRV_INSTANCE}}" }, { "id": "There was an issue parsing the options YAML. Wait a few moments, then try again.", "translation": "There was an issue parsing the options YAML. Wait a few moments, then try again." }, { "id": "There was an issue parsing the options for {{.Addon}}.", "translation": "There was an issue parsing the options for {{.Addon}}." }, { "id": "These labels replace any existing custom labels for worker pool '{{.WorkerPool}}'. Set these labels?", "translation": "These labels replace any existing custom labels for worker pool '{{.WorkerPool}}'. Set these labels?" }, { "id": "This add-on has customizable installation options. Continue with default values?", "translation": "This add-on has customizable installation options. Continue with default values?" }, { "id": "This command is deprecated. Create a worker pool by running '{{.CreateComamand}}' or add workers to an existing worker pool by running '{{.ResizeCommand}}'.", "translation": "This command is deprecated. Create a worker pool by running '{{.CreateComamand}}' or add workers to an existing worker pool by running '{{.ResizeCommand}}'." }, { "id": "This command is no longer supported.", "translation": "This command is no longer supported." }, { "id": "This experimental command was available until {{.Date}} and is now deactivated.", "translation": "This experimental command was available until {{.Date}} and is now deactivated." }, { "id": "This legacy command is deprecated and will soon be unsupported.", "translation": "This legacy command is deprecated and will soon be unsupported." }, { "id": "This legacy command is deprecated and will soon be unsupported. Use the '{{.Command}}' command instead.", "translation": "This legacy command is deprecated and will soon be unsupported. Use the '{{.Command}}' command instead." }, { "id": "This will replace any existing taints on worker pool {{.WorkerPool}}. Set these taints?", "translation": "This will replace any existing taints on worker pool {{.WorkerPool}}. Set these taints?" }, { "id": "Timed out while waiting for RBAC to synchronize. '{{.Kubectl}}' commands might fail.", "translation": "Timed out while waiting for RBAC to synchronize. '{{.Kubectl}}' commands might fail." }, { "id": "Timed out while waiting to process {{.WorkerID}}.", "translation": "Timed out while waiting to process {{.WorkerID}}." }, { "id": "Timeout", "translation": "Timeout" }, { "id": "To assess the differences across versions, see {{.VersionURL}}.", "translation": "To assess the differences across versions, see {{.VersionURL}}." }, { "id": "To create a cluster using a file", "translation": "To create a cluster using a file" }, { "id": "To disable an ALB", "translation": "To disable an ALB" }, { "id": "To enable an ALB", "translation": "To enable an ALB" }, { "id": "To get details for a specific ALB secret", "translation": "To get details for a specific ALB secret" }, { "id": "To get details for all ALB secrets matching a specific certificate CRN", "translation": "To get details for all ALB secrets matching a specific certificate CRN" }, { "id": "To get the network configuration, you must also include the {{.Flag}} flag.", "translation": "To get the network configuration, you must also include the {{.Flag}} flag." }, { "id": "To list all assignments for a configuration: {{.Example}}", "translation": "To list all assignments for a configuration: {{.Example}}" }, { "id": "To list all assignments for a service cluster as Location Admin: {{.Example}}", "translation": "To list all assignments for a service cluster as Location Admin: {{.Example}}" }, { "id": "To list all assignments for a service cluster as Service Admin: {{.Example}}", "translation": "To list all assignments for a service cluster as Service Admin: {{.Example}}" }, { "id": "To list storage classes, run '{{.Command}}'.", "translation": "To list storage classes, run '{{.Command}}'." }, { "id": "To remove a certificate for a specific ALB secret", "translation": "To remove a certificate for a specific ALB secret" }, { "id": "To remove all ALB secrets matching a specific certificate CRN", "translation": "To remove all ALB secrets matching a specific certificate CRN" }, { "id": "To replace the CA certificates in your cluster, use the '{{.Command}}' command.", "translation": "To replace the CA certificates in your cluster, use the '{{.Command}}' command." }, { "id": "To set infrastructure permissions, see {{.URL}}", "translation": "To set infrastructure permissions, see {{.URL}}" }, { "id": "To show all parameter details, run '{{.Command}}'.", "translation": "To show all parameter details, run '{{.Command}}'." }, { "id": "To test the storage templates, set this option to the GitHub organization where you forked the 'ibm-satellite-storage' repo.", "translation": "To test the storage templates, set this option to the GitHub organization where you forked the 'ibm-satellite-storage' repo." }, { "id": "To test the storage templates, set this option to the branch name in your 'ibm-satellite-storage' repo.", "translation": "To test the storage templates, set this option to the branch name in your 'ibm-satellite-storage' repo." }, { "id": "To update a specific ALB, specify the ALB ID. To see available ALB IDs, run '{{.Command}}'. To update more than one ALB, specify one ALB ID in each flag, such as '--alb ID_1 --alb ID_2'. To update all ALBs, do not include this flag.", "translation": "To update a specific ALB, specify the ALB ID. To see available ALB IDs, run '{{.Command}}'. To update more than one ALB, specify one ALB ID in each flag, such as '--alb ID_1 --alb ID_2'. To update all ALBs, do not include this flag." }, { "id": "To update a specific ALB, specify the ALB ID. To see available ALB IDs, run '{{.Command}}'. To update more than one ALB, specify one ALB ID in each flag, such as '--alb-id ID_1 --alb-id ID_2'. To update all ALBs, do not include this flag.", "translation": "To update a specific ALB, specify the ALB ID. To see available ALB IDs, run '{{.Command}}'. To update more than one ALB, specify one ALB ID in each flag, such as '--alb-id ID_1 --alb-id ID_2'. To update all ALBs, do not include this flag." }, { "id": "To update to {{.TargetVersion}} version, run '{{.Command}}'. Review and make any required version changes before you update: {{.ReleaseNotesURL}}", "translation": "To update to {{.TargetVersion}} version, run '{{.Command}}'. Review and make any required version changes before you update: {{.ReleaseNotesURL}}" }, { "id": "To upgrade now, run '{{.Command}}'.", "translation": "To upgrade now, run '{{.Command}}'." }, { "id": "To use this command, you must use the global API endpoint. Target the global endpoint by running 'ibmcloud ks init --host https://containers.cloud.ibm.com'.", "translation": "To use this command, you must use the global API endpoint. Target the global endpoint by running 'ibmcloud ks init --host https://containers.cloud.ibm.com'." }, { "id": "Total Workers", "translation": "Total Workers" }, { "id": "Trusted", "translation": "Trusted" }, { "id": "Trusted CA certificate or chain used to validate the destination server's certificate. For example 'myCA.pem'.", "translation": "Trusted CA certificate or chain used to validate the destination server's certificate. For example 'myCA.pem'." }, { "id": "Trusted CA certificate or chain used to validate the source client's certificate when source-tls-mode is mutual. For example 'myCA.pem'.", "translation": "Trusted CA certificate or chain used to validate the source client's certificate when source-tls-mode is mutual. For example 'myCA.pem'." }, { "id": "Trusted addresses", "translation": "Trusted addresses" }, { "id": "Type", "translation": "Type" }, { "id": "URL", "translation": "URL" }, { "id": "USAGE:", "translation": "USAGE:" }, { "id": "Unable to disable {{.Addon}} because it is required by the {{.DependentList}} add-on(s).", "translation": "Unable to disable {{.Addon}} because it is required by the {{.DependentList}} add-on(s)." }, { "id": "Unable to find add-on '{{.Addon}}'. Check the add-on name and try again.", "translation": "Unable to find add-on '{{.Addon}}'. Check the add-on name and try again." }, { "id": "Unable to find the cluster '{{.Cluster}}'.", "translation": "Unable to find the cluster '{{.Cluster}}'." }, { "id": "Unable to find the subscription '{{.Subscription}}'.", "translation": "Unable to find the subscription '{{.Subscription}}'." }, { "id": "Unable to find {{.Addon}} on cluster {{.Cluster}}.", "translation": "Unable to find {{.Addon}} on cluster {{.Cluster}}." }, { "id": "Unable to get the service key", "translation": "Unable to get the service key" }, { "id": "Unable to list '{{.Resources}}' infrastructure resources for one or more locations. You might have more '{{.Resources}}' than are shown. Try again later.\n You might be able to resolve the issue or refer to the following error details in a support case. Incident ID: {{.ReqID}}. Error Code: {{.ErrorCode}}. Error Message: {{.ErrorMessage}}.", "translation": "Unable to list '{{.Resources}}' infrastructure resources for one or more locations. You might have more '{{.Resources}}' than are shown. Try again later.\n You might be able to resolve the issue or refer to the following error details in a support case. Incident ID: {{.ReqID}}. Error Code: {{.ErrorCode}}. Error Message: {{.ErrorMessage}}." }, { "id": "Unable to locate kubeconfig in zip archive", "translation": "Unable to locate kubeconfig in zip archive" }, { "id": "Unable to parse the service key json", "translation": "Unable to parse the service key json" }, { "id": "Unable to resolve resource name conflict. Specify the resource ID instead of the name and try again.", "translation": "Unable to resolve resource name conflict. Specify the resource ID instead of the name and try again." }, { "id": "Unable to write file {{.path}} - error {{.err}}", "translation": "Unable to write file {{.path}} - error {{.err}}" }, { "id": "Unbinding service instance...", "translation": "Unbinding service instance..." }, { "id": "Unexpected format for supported range. Failed to compile", "translation": "Unexpected format for supported range. Failed to compile" }, { "id": "Unrecognized operating system type: {{.OS}}", "translation": "Unrecognized operating system type: {{.OS}}" }, { "id": "Unrecognized protocol type: {{.Protocol}}", "translation": "Unrecognized protocol type: {{.Protocol}}" }, { "id": "Unregister an IBM Cloud Secrets Manager instance from a cluster.", "translation": "Unregister an IBM Cloud Secrets Manager instance from a cluster." }, { "id": "Unregistered {{.ClustCount}} clusters and {{.ResCount}} resources. Your clusters and existing resources are no longer subscribed to Satellite configuration updates.", "translation": "Unregistered {{.ClustCount}} clusters and {{.ResCount}} resources. Your clusters and existing resources are no longer subscribed to Satellite configuration updates." }, { "id": "Unset a registered IBM Cloud Secrets Manager instance from default.", "translation": "Unset a registered IBM Cloud Secrets Manager instance from default." }, { "id": "Unset the public VLAN so that the workers in this zone are connected to a private VLAN only.", "translation": "Unset the public VLAN so that the workers in this zone are connected to a private VLAN only." }, { "id": "Unsetting Kubernetes API server PodSecurity config for {{.Cluster}}...", "translation": "Unsetting Kubernetes API server PodSecurity config for {{.Cluster}}..." }, { "id": "Unsetting autoscaling configuration for {{.ALBID}}...", "translation": "Unsetting autoscaling configuration for {{.ALBID}}..." }, { "id": "Update a Satellite storage assignment.", "translation": "Update a Satellite storage assignment." }, { "id": "Update a Satellite subscription.", "translation": "Update a Satellite subscription." }, { "id": "Update a log forwarding configuration for a cluster.", "translation": "Update a log forwarding configuration for a cluster." }, { "id": "Update a logging filter.", "translation": "Update a logging filter." }, { "id": "Update all add-on dependencies.", "translation": "Update all add-on dependencies." }, { "id": "Update an Ingress domain for a cluster. The records passed in will fully replace the current records associated with the domain. Passing in no records will unregister the current records from a domain.", "translation": "Update an Ingress domain for a cluster. The records passed in will fully replace the current records associated with the domain. Passing in no records will unregister the current records from a domain." }, { "id": "Update an endpoint. Only the options that you specify are updated.", "translation": "Update an endpoint. Only the options that you specify are updated." }, { "id": "Update an existing DNS host name by replacing the load balancer hostname associated with it in a VPC cluster.", "translation": "Update an existing DNS host name by replacing the load balancer hostname associated with it in a VPC cluster." }, { "id": "Update an existing Ingress secret.", "translation": "Update an existing Ingress secret." }, { "id": "Update cluster add-ons.", "translation": "Update cluster add-ons." }, { "id": "Update host information, such as zones and labels.", "translation": "Update host information, such as zones and labels." }, { "id": "Update one or more worker nodes in a classic cluster to a new Kubernetes version. During the update, the worker node is updated with the latest image and data is permanently deleted if not stored on persistent storage.", "translation": "Update one or more worker nodes in a classic cluster to a new Kubernetes version. During the update, the worker node is updated with the latest image and data is permanently deleted if not stored on persistent storage." }, { "id": "Update the Satellite subscription to use your identity to manage resources.", "translation": "Update the Satellite subscription to use your identity to manage resources." }, { "id": "Update the cluster master to the latest version.", "translation": "Update the cluster master to the latest version." }, { "id": "Update the default configuration of a registered IBM Cloud Secrets Manager instance.", "translation": "Update the default configuration of a registered IBM Cloud Secrets Manager instance." }, { "id": "Update the existing ALB certificate secret for the cluster.", "translation": "Update the existing ALB certificate secret for the cluster." }, { "id": "Update the name of an ACL.", "translation": "Update the name of an ACL." }, { "id": "Update the worker node to the same major and minor version of the master and the latest patch.", "translation": "Update the worker node to the same major and minor version of the master and the latest patch." }, { "id": "Updated", "translation": "Updated" }, { "id": "Updating ALB Certificate...", "translation": "Updating ALB Certificate..." }, { "id": "Updating ALB pods for {{.Selector}} to version '{{.Version}}' in cluster {{.Cluster}}...", "translation": "Updating ALB pods for {{.Selector}} to version '{{.Version}}' in cluster {{.Cluster}}..." }, { "id": "Updating NLB DNS...", "translation": "Updating NLB DNS..." }, { "id": "Updating add-on {{.Addon}} to {{.Version}} for cluster {{.Cluster}}...", "translation": "Updating add-on {{.Addon}} to {{.Version}} for cluster {{.Cluster}}..." }, { "id": "Updating automatic updates setting for cluster {{.Cluster}}...", "translation": "Updating automatic updates setting for cluster {{.Cluster}}..." }, { "id": "Updating cluster {{.Cluster}}...", "translation": "Updating cluster {{.Cluster}}..." }, { "id": "Updating host...", "translation": "Updating host..." }, { "id": "Updating log forwarding configuration for {{.ConfigID}} in cluster {{.Cluster}}...", "translation": "Updating log forwarding configuration for {{.ConfigID}} in cluster {{.Cluster}}..." }, { "id": "Updating the log forwarding filter {{.FilterConfig}} for cluster {{.Cluster}}...", "translation": "Updating the log forwarding filter {{.FilterConfig}} for cluster {{.Cluster}}..." }, { "id": "Updating the worker node version can cause downtime for your apps and services. During the update, all pods might be rescheduled onto other worker nodes and data is deleted if not stored outside the pod. To avoid downtime, ensure that you have enough worker nodes to handle your workload while the selected worker nodes are updating.", "translation": "Updating the worker node version can cause downtime for your apps and services. During the update, all pods might be rescheduled onto other worker nodes and data is deleted if not stored outside the pod. To avoid downtime, ensure that you have enough worker nodes to handle your workload while the selected worker nodes are updating." }, { "id": "Upgrade a Satellite Mesh instance.", "translation": "Upgrade a Satellite Mesh instance." }, { "id": "Use the '--output json' flag to print the full certificate in JSON format.", "translation": "Use the '--output json' flag to print the full certificate in JSON format." }, { "id": "Use this flag to prevent a public VLAN from being created. Required only when you specify the '--{{.PrivateVLANFlag}}' flag without specifying the '--{{.PublicVLANFlag}}' flag.", "translation": "Use this flag to prevent a public VLAN from being created. Required only when you specify the '--{{.PrivateVLANFlag}}' flag without specifying the '--{{.PublicVLANFlag}}' flag." }, { "id": "User Managed", "translation": "User Managed" }, { "id": "User-Agent header cannot be overridden.", "translation": "User-Agent header cannot be overridden." }, { "id": "User-managed", "translation": "User-managed" }, { "id": "Using default API endpoint: {{.Endpoint}}", "translation": "Using default API endpoint: {{.Endpoint}}" }, { "id": "Using default installation options...", "translation": "Using default installation options..." }, { "id": "Using installation options...", "translation": "Using installation options..." }, { "id": "Using user provided API endpoint: {{.Endpoint}}", "translation": "Using user provided API endpoint: {{.Endpoint}}" }, { "id": "VLAN ID", "translation": "VLAN ID" }, { "id": "VLAN spanning is disabled.", "translation": "VLAN spanning is disabled." }, { "id": "VLAN spanning is enabled.", "translation": "VLAN spanning is enabled." }, { "id": "VPC", "translation": "VPC" }, { "id": "VPC Gen 2 only: Modify the PROXY protocol configuration for ALB load balancers. After you run these commands, existing load balancers are deleted and recreated, which can cause service disruptions. Two unused IP addresses must be available in each subnet during the load balancer recreation.", "translation": "VPC Gen 2 only: Modify the PROXY protocol configuration for ALB load balancers. After you run these commands, existing load balancers are deleted and recreated, which can cause service disruptions. Two unused IP addresses must be available in each subnet during the load balancer recreation." }, { "id": "VPC Infrastructure Zones", "translation": "VPC Infrastructure Zones" }, { "id": "VPCs", "translation": "VPCs" }, { "id": "VPE Gateway", "translation": "VPE Gateway" }, { "id": "Value", "translation": "Value" }, { "id": "Verify Mode", "translation": "Verify Mode" }, { "id": "Version", "translation": "Version" }, { "id": "Version ID", "translation": "Version ID" }, { "id": "Versions", "translation": "Versions" }, { "id": "View Satellite service clusters.", "translation": "View Satellite service clusters." }, { "id": "View a detailed vulnerability assessment report for a container that runs in a cluster.", "translation": "View a detailed vulnerability assessment report for a container that runs in a cluster." }, { "id": "View a list of storage volumes.", "translation": "View a list of storage volumes." }, { "id": "View a logging filter configuration.", "translation": "View a logging filter configuration." }, { "id": "View and configure Ingress status reports.", "translation": "View and configure Ingress status reports." }, { "id": "View and configure Key Management Service integrations.", "translation": "View and configure Key Management Service integrations." }, { "id": "View and configure an Ingress application load balancer (ALB).", "translation": "View and configure an Ingress application load balancer (ALB)." }, { "id": "View and configure available Key Management Service instances.", "translation": "View and configure available Key Management Service instances." }, { "id": "View and configure ignored warnings for a cluster.", "translation": "View and configure ignored warnings for a cluster." }, { "id": "View and manage Satellite Config keys.", "translation": "View and manage Satellite Config keys." }, { "id": "View and manage Satellite Configuration.", "translation": "View and manage Satellite Configuration." }, { "id": "View and manage Satellite access control lists (ACLs).", "translation": "View and manage Satellite access control lists (ACLs)." }, { "id": "View and manage Satellite cluster groups. Cluster groups are used to subscribe clusters to Satellite configurations of Kubernetes resources.", "translation": "View and manage Satellite cluster groups. Cluster groups are used to subscribe clusters to Satellite configurations of Kubernetes resources." }, { "id": "View and manage Satellite configuration versions.", "translation": "View and manage Satellite configuration versions." }, { "id": "View and manage Satellite endpoints.", "translation": "View and manage Satellite endpoints." }, { "id": "View and manage Satellite storage assignments.", "translation": "View and manage Satellite storage assignments." }, { "id": "View and manage Satellite storage configurations.", "translation": "View and manage Satellite storage configurations." }, { "id": "View and manage Satellite storage resources.", "translation": "View and manage Satellite storage resources." }, { "id": "View and manage Satellite subscriptions to deploy Kubernetes configuration files to your clusters.", "translation": "View and manage Satellite subscriptions to deploy Kubernetes configuration files to your clusters." }, { "id": "View and manage the storage classes in your Satellite storage configuration.", "translation": "View and manage the storage classes in your Satellite storage configuration." }, { "id": "View and modify Ingress services and settings", "translation": "View and modify Ingress services and settings" }, { "id": "View and modify Satellite Mesh instances.", "translation": "View and modify Satellite Mesh instances." }, { "id": "View and modify Satellite hosts.", "translation": "View and modify Satellite hosts." }, { "id": "View and modify cluster and cluster service settings.", "translation": "View and modify cluster and cluster service settings." }, { "id": "View and modify storage resources.", "translation": "View and modify storage resources." }, { "id": "View and modify storage volume attachments of worker nodes in your cluster.", "translation": "View and modify storage volume attachments of worker nodes in your cluster." }, { "id": "View and modify the PodSecurity admission settings for a cluster's Kubernetes API server.", "translation": "View and modify the PodSecurity admission settings for a cluster's Kubernetes API server." }, { "id": "View and modify the audit webhook configuration for a cluster's Kubernetes API server. The webhook backend forwards API server audit logs to a remote server.", "translation": "View and modify the audit webhook configuration for a cluster's Kubernetes API server. The webhook backend forwards API server audit logs to a remote server." }, { "id": "View and modify the deprecated PodSecurityPolicy configuration for a cluster's Kubernetes API server.", "translation": "View and modify the deprecated PodSecurityPolicy configuration for a cluster's Kubernetes API server." }, { "id": "View and modify the master for a cluster.", "translation": "View and modify the master for a cluster." }, { "id": "View and modify the web console and OAuth server access type for Red Hat OpenShift on IBM Cloud VPC infrastructure.\nChanging has effect only if the cluster is created without public service endpoint.", "translation": "View and modify the web console and OAuth server access type for Red Hat OpenShift on IBM Cloud VPC infrastructure.\nChanging has effect only if the cluster is created without public service endpoint." }, { "id": "View and modify worker nodes for a cluster.", "translation": "View and modify worker nodes for a cluster." }, { "id": "View and modify worker pools for a cluster.", "translation": "View and modify worker pools for a cluster." }, { "id": "View dedicated host flavors.", "translation": "View dedicated host flavors." }, { "id": "View details of an installed add-on.", "translation": "View details of an installed add-on." }, { "id": "View information about infrastructure permissions that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account.", "translation": "View information about infrastructure permissions that allow you to access the IBM Cloud classic infrastructure portfolio through your IBM Cloud account." }, { "id": "View information about the API key for a cluster or reset it to a new key.", "translation": "View information about the API key for a cluster or reset it to a new key." }, { "id": "View information about the API key owner for a cluster.", "translation": "View information about the API key owner for a cluster." }, { "id": "View installation options for an add-on.", "translation": "View installation options for an add-on." }, { "id": "View log forwarding configurations for a cluster.", "translation": "View log forwarding configurations for a cluster." }, { "id": "View or modify log filters for a cluster.", "translation": "View or modify log filters for a cluster." }, { "id": "View or modify log forwarding configurations for a cluster.", "translation": "View or modify log forwarding configurations for a cluster." }, { "id": "View or set the API endpoint and API version for the service.", "translation": "View or set the API endpoint and API version for the service." }, { "id": "View status of the Ingress health checker.", "translation": "View status of the Ingress health checker." }, { "id": "View the PodSecurity admission configuration for a cluster's Kubernetes API server.", "translation": "View the PodSecurity admission configuration for a cluster's Kubernetes API server." }, { "id": "View the PodSecurityPolicy configuration for a cluster's Kubernetes API server.", "translation": "View the PodSecurityPolicy configuration for a cluster's Kubernetes API server." }, { "id": "View the Satellite storage templates.", "translation": "View the Satellite storage templates." }, { "id": "View the VLAN spanning status for your IBM Cloud classic infrastructure account.", "translation": "View the VLAN spanning status for your IBM Cloud classic infrastructure account." }, { "id": "View the audit webhook configuration for a cluster's Kubernetes API server. The webhook backend forwards API server audit logs to a remote server.", "translation": "View the audit webhook configuration for a cluster's Kubernetes API server. The webhook backend forwards API server audit logs to a remote server." }, { "id": "View the current user messages.", "translation": "View the current user messages." }, { "id": "View the details of a Kubernetes resource that is managed by a Satellite configuration.", "translation": "View the details of a Kubernetes resource that is managed by a Satellite configuration." }, { "id": "View the details of a Satellite Connector.", "translation": "View the details of a Satellite Connector." }, { "id": "View the details of a Satellite host.", "translation": "View the details of a Satellite host." }, { "id": "View the details of a Satellite location.", "translation": "View the details of a Satellite location." }, { "id": "View the details of a cluster's CA certificate.", "translation": "View the details of a cluster's CA certificate." }, { "id": "View the details of a cluster.", "translation": "View the details of a cluster." }, { "id": "View the details of a registered NLB host name in a cluster.", "translation": "View the details of a registered NLB host name in a cluster." }, { "id": "View the details of a registered subdomain in a Satellite location.", "translation": "View the details of a registered subdomain in a Satellite location." }, { "id": "View the details of a worker node.", "translation": "View the details of a worker node." }, { "id": "View the details of an ACL.", "translation": "View the details of an ACL." }, { "id": "View the details of an IBM Cloud Secrets Manager instance.", "translation": "View the details of an IBM Cloud Secrets Manager instance." }, { "id": "View the details of an Ingress ALB certificate in a cluster.", "translation": "View the details of an Ingress ALB certificate in a cluster." }, { "id": "View the details of an Ingress ALB in a cluster.", "translation": "View the details of an Ingress ALB in a cluster." }, { "id": "View the details of an Ingress domain.", "translation": "View the details of an Ingress domain." }, { "id": "View the details of an Ingress secret.", "translation": "View the details of an Ingress secret." }, { "id": "View the details of an endpoint.", "translation": "View the details of an endpoint." }, { "id": "View the domain provider credential details.", "translation": "View the domain provider credential details." }, { "id": "View the fields of an Ingress secret.", "translation": "View the fields of an Ingress secret." }, { "id": "View the quota and limits for cluster-related resources in your IBM Cloud account.", "translation": "View the quota and limits for cluster-related resources in your IBM Cloud account." }, { "id": "View the rotation status of CA certificates for a cluster.", "translation": "View the rotation status of CA certificates for a cluster." }, { "id": "View the settings for an existing health check monitor.", "translation": "View the settings for an existing health check monitor." }, { "id": "View the zones attached to a worker pool.", "translation": "View the zones attached to a worker pool." }, { "id": "View whether the Ingress ALB pods in a cluster are set to automatically update and whether ALB pods are at the latest version.", "translation": "View whether the Ingress ALB pods in a cluster are set to automatically update and whether ALB pods are at the latest version." }, { "id": "View whether your Fluentd pods are set to automatically update in a cluster.", "translation": "View whether your Fluentd pods are set to automatically update in a cluster." }, { "id": "View whether your cluster is set to automatically update the master to the latest patch version.", "translation": "View whether your cluster is set to automatically update the master to the latest patch version." }, { "id": "View, bind, and unbind IBM Cloud services on a cluster.", "translation": "View, bind, and unbind IBM Cloud services on a cluster." }, { "id": "View, create, and delete a dedicated host pool.", "translation": "View, create, and delete a dedicated host pool." }, { "id": "View, create, and delete a dedicated host.", "translation": "View, create, and delete a dedicated host." }, { "id": "View, create, and remove a dedicated host or dedicated host pool.", "translation": "View, create, and remove a dedicated host or dedicated host pool." }, { "id": "View, enable, update, and disable cluster add-ons.", "translation": "View, enable, update, and disable cluster add-ons." }, { "id": "Volume ID", "translation": "Volume ID" }, { "id": "Volume Name", "translation": "Volume Name" }, { "id": "Volume Status", "translation": "Volume Status" }, { "id": "Volume Type", "translation": "Volume Type" }, { "id": "Volume attachment was created...", "translation": "Volume attachment was created..." }, { "id": "WARNING:", "translation": "WARNING:" }, { "id": "Waiting for RBAC synchronization to complete...", "translation": "Waiting for RBAC synchronization to complete..." }, { "id": "When a timeout occurs, the number of retries to attempt before the IP is considered unhealthy. Retries are attempted immediately. Must be in the range [0, 5]. Default: '2'", "translation": "When a timeout occurs, the number of retries to attempt before the IP is considered unhealthy. Retries are attempted immediately. Must be in the range [0, 5]. Default: '2'" }, { "id": "When logging type is 'syslog', the hostname or IP address of the log collector. When logging type is 'ibm' (deprecated), the logging ingest endpoint. If you do not provide the logging ingest endpoint, then the current region's endpoint is used.", "translation": "When logging type is 'syslog', the hostname or IP address of the log collector. When logging type is 'ibm' (deprecated), the logging ingest endpoint. If you do not provide the logging ingest endpoint, then the current region's endpoint is used." }, { "id": "When the '--{{.FlagName1}}' flag is specified, the '--{{.FlagName2}}' flag is also required.", "translation": "When the '--{{.FlagName1}}' flag is specified, the '--{{.FlagName2}}' flag is also required." }, { "id": "When the logging type is 'syslog' and the protocol is tls, the Kubernetes secret name that contains the Certificate Authority certificate.", "translation": "When the logging type is 'syslog' and the protocol is tls, the Kubernetes secret name that contains the Certificate Authority certificate." }, { "id": "When the logging type is 'syslog' and the protocol is tls, the verification mode. Supported values are 'verify-peer' and the default 'verify-none'.", "translation": "When the logging type is 'syslog' and the protocol is tls, the verification mode. Supported values are 'verify-peer' and the default 'verify-none'." }, { "id": "When the logging type is 'syslog', the transport layer protocol. Supported values are 'tls', 'tcp' and the default 'udp'. When forwarding to an rsyslog server with the UDP protocol, logs that are over 1KB are truncated.", "translation": "When the logging type is 'syslog', the transport layer protocol. Supported values are 'tls', 'tcp' and the default 'udp'. When forwarding to an rsyslog server with the UDP protocol, logs that are over 1KB are truncated." }, { "id": "When you apply these changes the cluster's API server automatically refreshes. After the server refreshes, you must reload the workers by running either 'ibmcloud ks worker reload' in classic clusters or 'ibmcloud ks worker replace' in VPC clusters.", "translation": "When you apply these changes the cluster's API server automatically refreshes. After the server refreshes, you must reload the workers by running either 'ibmcloud ks worker reload' in classic clusters or 'ibmcloud ks worker replace' in VPC clusters." }, { "id": "When you specify a private VLAN, you must also specify either the '--{{.PublicVLANFlag}}' flag or the '--{{.PrivateOnlyFlag}}' flag.", "translation": "When you specify a private VLAN, you must also specify either the '--{{.PublicVLANFlag}}' flag or the '--{{.PrivateOnlyFlag}}' flag." }, { "id": "When you use the {{.NetworkFlag}} flag, only the {{.Format}} format is supported for the {{.FormatFlag}} flag.", "translation": "When you use the {{.NetworkFlag}} flag, only the {{.Format}} format is supported for the {{.FormatFlag}} flag." }, { "id": "Worker", "translation": "Worker" }, { "id": "Worker ID", "translation": "Worker ID" }, { "id": "Worker IP", "translation": "Worker IP" }, { "id": "Worker Pool", "translation": "Worker Pool" }, { "id": "Worker Pool ID", "translation": "Worker Pool ID" }, { "id": "Worker Pool Name", "translation": "Worker Pool Name" }, { "id": "Worker Pools", "translation": "Worker Pools" }, { "id": "Worker Zones", "translation": "Worker Zones" }, { "id": "Worker pool is not balanced. At least one zone does not have the number of workers that you specified with the '--{{.SizeFlag}}' flag. To rebalance the pool by adding worker nodes in the zone, run '{{.Command}}'.", "translation": "Worker pool is not balanced. At least one zone does not have the number of workers that you specified with the '--{{.SizeFlag}}' flag. To rebalance the pool by adding worker nodes in the zone, run '{{.Command}}'." }, { "id": "Workers", "translation": "Workers" }, { "id": "Workers per Zone", "translation": "Workers per Zone" }, { "id": "Would you like to remove zone [{{.Zone}}]?", "translation": "Would you like to remove zone [{{.Zone}}]?" }, { "id": "You are logged in to a Dedicated endpoint. You cannot config logging in this context. Log into IBM Cloud endpoint and target your public org and space to enable log forwarding.", "translation": "You are logged in to a Dedicated endpoint. You cannot config logging in this context. Log into IBM Cloud endpoint and target your public org and space to enable log forwarding." }, { "id": "You can manually use the new kubeconfig file: {{.Kubeconfig}}", "translation": "You can manually use the new kubeconfig file: {{.Kubeconfig}}" }, { "id": "You can now execute '{{.Kubectl}}' commands against your cluster. For example, run '{{.ExampleCommand}}'.", "translation": "You can now execute '{{.Kubectl}}' commands against your cluster. For example, run '{{.ExampleCommand}}'." }, { "id": "You can specify either one 'cluster' or one 'subscription' flag at a time.", "translation": "You can specify either one 'cluster' or one 'subscription' flag at a time." }, { "id": "You cannot provide both a namespace and an ID. Provide either a namespace or an ID instead.", "translation": "You cannot provide both a namespace and an ID. Provide either a namespace or an ID instead." }, { "id": "You cannot set the '{{.Flag1}}' and '{{.Flag2}}' flags at the same time.", "translation": "You cannot set the '{{.Flag1}}' and '{{.Flag2}}' flags at the same time." }, { "id": "You cannot specify the '--all' and '--assignment' options at the same time. Specify only one of these options and try again.", "translation": "You cannot specify the '--all' and '--assignment' options at the same time. Specify only one of these options and try again." }, { "id": "You cannot specify the '--cluster' and '--service-cluster-id' option at the same time. Specify only one of these options and try again.", "translation": "You cannot specify the '--cluster' and '--service-cluster-id' option at the same time. Specify only one of these options and try again." }, { "id": "You cannot specify the '--cluster', '--group' and '--service-cluster-id' flags at the same time. Specify only one of these flags and try again.", "translation": "You cannot specify the '--cluster', '--group' and '--service-cluster-id' flags at the same time. Specify only one of these flags and try again." }, { "id": "You cannot specify the '--config' option with other options.", "translation": "You cannot specify the '--config' option with other options." }, { "id": "You cannot specify the '{{.A}}' and '{{.B}}' arguments at the same time.", "translation": "You cannot specify the '{{.A}}' and '{{.B}}' arguments at the same time." }, { "id": "You cannot unregister a cluster in a Satellite location. Delete the cluster instead.", "translation": "You cannot unregister a cluster in a Satellite location. Delete the cluster instead." }, { "id": "You cannot use the '--{{.PrivateOnlyFlag}}' flag if you specified the '--{{.PublicVLANFlag}}' flag.", "translation": "You cannot use the '--{{.PrivateOnlyFlag}}' flag if you specified the '--{{.PublicVLANFlag}}' flag." }, { "id": "You might need to change your YAML files for deployments before updating. Review the docs for details: {{.WorkerReleaseNotesURL}}", "translation": "You might need to change your YAML files for deployments before updating. Review the docs for details: {{.WorkerReleaseNotesURL}}" }, { "id": "You must enable Red Hat CoreOs with the '--{{.FlagName}}' option to use '--{{.FlagName2}}'.", "translation": "You must enable Red Hat CoreOs with the '--{{.FlagName}}' option to use '--{{.FlagName2}}'." }, { "id": "You must specify a load balancer host name in the '--nlb-host' flag.", "translation": "You must specify a load balancer host name in the '--nlb-host' flag." }, { "id": "You must specify a private VLAN to add a zone to multiple worker pools. When you specify a private VLAN, you must also specify a public VLAN or include the --{{.PrivateOnlyFlag}} flag.", "translation": "You must specify a private VLAN to add a zone to multiple worker pools. When you specify a private VLAN, you must also specify a public VLAN or include the --{{.PrivateOnlyFlag}} flag." }, { "id": "You must specify an NLB IP address in the '--ip' flag", "translation": "You must specify an NLB IP address in the '--ip' flag" }, { "id": "You must specify at least one NLB IP address for {{.IPFlag}}.", "translation": "You must specify at least one NLB IP address for {{.IPFlag}}." }, { "id": "You must specify either '{{.A}}' or all of '{{.B}}'.", "translation": "You must specify either '{{.A}}' or all of '{{.B}}'." }, { "id": "You must specify three IP addresses for {{.IPFlag}}.", "translation": "You must specify three IP addresses for {{.IPFlag}}." }, { "id": "Your Ingress subdomain and secret might not be ready yet. For more info by cluster type, see '{{.URL}}' for Kubernetes or '{{.URLOCP}}' for OpenShift.", "translation": "Your Ingress subdomain and secret might not be ready yet. For more info by cluster type, see '{{.URL}}' for Kubernetes or '{{.URLOCP}}' for OpenShift." }, { "id": "Your Secrets Manager instance could not be registered to your cluster. The following errors occurred: ", "translation": "Your Secrets Manager instance could not be registered to your cluster. The following errors occurred: " }, { "id": "Your cluster order is complete and your cluster is creating. However, some related components need your attention:", "translation": "Your cluster order is complete and your cluster is creating. However, some related components need your attention:" }, { "id": "Zone", "translation": "Zone" }, { "id": "Zones", "translation": "Zones" }, { "id": "all ALBs", "translation": "all ALBs" }, { "id": "and", "translation": "and" }, { "id": "cluster", "translation": "cluster" }, { "id": "cluster name", "translation": "cluster name" }, { "id": "cluster name or ID", "translation": "cluster name or ID" }, { "id": "default:", "translation": "default:" }, { "id": "denotes the zone is in a multizone region.", "translation": "denotes the zone is in a multizone region." }, { "id": "deprecated, unsupported in {{.DaysToEOS}} days", "translation": "deprecated, unsupported in {{.DaysToEOS}} days" }, { "id": "disabled", "translation": "disabled" }, { "id": "enabled", "translation": "enabled" }, { "id": "enabled in the default namespace", "translation": "enabled in the default namespace" }, { "id": "latest", "translation": "latest" }, { "id": "linked account API key", "translation": "linked account API key" }, { "id": "logging configuration ID", "translation": "logging configuration ID" }, { "id": "manually-set IaaS credentials", "translation": "manually-set IaaS credentials" }, { "id": "mesh name or ID", "translation": "mesh name or ID" }, { "id": "mesh version", "translation": "mesh version" }, { "id": "must be a non-zero integer", "translation": "must be a non-zero integer" }, { "id": "must be an integer", "translation": "must be an integer" }, { "id": "must be an integer 0 or greater", "translation": "must be an integer 0 or greater" }, { "id": "must be an integer greater than 0", "translation": "must be an integer greater than 0" }, { "id": "no", "translation": "no" }, { "id": "or", "translation": "or" }, { "id": "pod name", "translation": "pod name" }, { "id": "primary", "translation": "primary" }, { "id": "private VLAN", "translation": "private VLAN" }, { "id": "public VLAN", "translation": "public VLAN" }, { "id": "require that an nlb-host is passed in", "translation": "require that an nlb-host is passed in" }, { "id": "required", "translation": "required" }, { "id": "suggested", "translation": "suggested" }, { "id": "the default Kubernetes", "translation": "the default Kubernetes" }, { "id": "the size must be one of {{.SizeList}}", "translation": "the size must be one of {{.SizeList}}" }, { "id": "unsupported", "translation": "unsupported" }, { "id": "worker", "translation": "worker" }, { "id": "worker pool name or ID", "translation": "worker pool name or ID" }, { "id": "yes", "translation": "yes" }, { "id": "zone name", "translation": "zone name" }, { "id": "{{.A}} must be one of {{.B}}", "translation": "{{.A}} must be one of {{.B}}" }, { "id": "{{.EntityType}} End of Service Date:", "translation": "{{.EntityType}} End of Service Date:" }, { "id": "{{.Flavor}} Versions", "translation": "{{.Flavor}} Versions" }, { "id": "{{.Namespace}} namespace", "translation": "{{.Namespace}} namespace" }, { "id": "{{.SourceBranch}}' is not a supported parameter.", "translation": "{{.SourceBranch}}' is not a supported parameter." }, { "id": "{{.State}} the {{.Allowlist}} feature for cluster {{.Cluster}}?", "translation": "{{.State}} the {{.Allowlist}} feature for cluster {{.Cluster}}?" }, { "id": "{{.Zone}} could not be found in cluster {{.Cluster}}", "translation": "{{.Zone}} could not be found in cluster {{.Cluster}}" } ]