parated string type: list elements: str default: [] version_added: "0.9" conf_file: description: - The remote yum configuration file to use for the transaction. type: str version_added: "0.6" disable_gpg_check: description: - Whether to disable the GPG checking of signatures of packages being installed. Has an effect only if state is I(present) or I(latest). type: bool default: "no" version_added: "1.2" skip_broken: description: - Skip all unavailable packages or packages with broken dependencies without raising an error. Equivalent to passing the --skip-broken option. type: bool default: "no" version_added: "2.3" update_cache: description: - Force yum to check if cache is out of date and redownload if needed. Has an effect only if state is I(present) or I(latest). type: bool default: "no" aliases: [ expire-cache ] version_added: "1.9" validate_certs: description: - This only applies if using a https url as the source of the rpm. e.g. for localinstall. If set to C(false), the SSL certificates will not be validated. - This should only set to C(false) used on personally controlled sites using self-signed certificates as it avoids verifying the source site. - Prior to 2.1 the code worked as if this was set to C(true). type: bool default: "yes" version_added: "2.1" sslverify: description: - Disables SSL validation of the repository server for this transaction. - This should be set to C(false) if one of the configured repositories is using an untrusted or self-signed certificate. type: bool default: "yes" version_added: "2.13" update_only: description: - When using latest, only update installed packages. Do not install packages. - Has an effect only if state is I(latest) default: "no" type: bool version_added: "2.5" installroot: description: - Specifies an alternative installroot, relative to which all packages will be installed. default: "/" type: str version_added: "2.3" security: description: - If set to C(true), and C(state=latest) then only installs updates that have been marked security related. type: bool default: "no" version_added: "2.4" bugfix: description: - If set to C(true), and C(state=latest) then only installs updates that have been marked bugfix related. default: "no" type: bool version_added: "2.6" allow_downgrade: description: - Specify if the named package and version is allowed to downgrade a maybe already installed higher version of that package. Note that setting allow_downgrade=True can make this module behave in a non-idempotent way. The task could end up with a set of packages that does not match the complete list of specified packages to install (because dependencies between the downgraded package and others can cause changes to the packages which were in the earlier transaction). type: bool default: "no" version_added: "2.4" enable_plugin: description: - I(Plugin) name to enable for the install/update operation. The enabled plugin will not persist beyond the transaction. type: list elements: str default: [] version_added: "2.5" disable_plugin: description: - I(Plugin) name to disable for the install/update operation. The disabled plugins will not persist beyond the transaction. type: list elements: str default: [] version_added: "2.5" releasever: description: - Specifies an alternative release from which all packages will be installed. type: str version_added: "2.7" autoremove: description: - If C(true), removes all "leaf" packages from the system that were originally installed as dependencies of user-installed packages but which are no longer required by any such package. Should be used alone or when state is I(absent) - "NOTE: This feature requires yum >= 3.4.3 (RHEL/CentOS 7+)" type: bool default: "no" version_added: "2.7" disable_excludes: description: - Disable the excludes defined in YUM config files. - If set to C(all), disables all excludes. - If set to C(main), disable excludes defined in [main] in yum.conf. - If set to C(repoid), disable excludes defined for given repo id. type: str version_added: "2.7" download_only: description: - Only download the packages, do not install them. default: "no" type: bool version_added: "2.7" lock_timeout: description: - Amount of time to wait for the yum lockfile to be freed. required: false default: 30 type: int version_added: "2.8" install_weak_deps: description: - Will also install all packages linked by a weak dependency relation. - "NOTE: This feature requires yum >= 4 (RHEL/CentOS 8+)" type: bool default: "yes" version_added: "2.8" download_dir: description: - Specifies an alternate directory to store packages. - Has an effect only if I(download_only) is specified. type: str version_added: "2.8" install_repoquery: description: - If repoquery is not available, install yum-utils. If the system is registered to RHN or an RHN Satellite, repoquery allows for querying all channels assigned to the system. It is also required to use the 'list' parameter. - "NOTE: This will run and be logged as a separate yum transation which takes place before any other installation or removal." - "NOTE: This will use the system's default enabled repositories without regard for disablerepo/enablerepo given to the module." required: false version_added: "1.5" default: "yes" type: bool cacheonly: description: - Tells yum to run entirely from system cache; does not download or update metadata. default: "no" type: bool version_added: "2.12" extends_documentation_fragment: - action_common_attributes - action_common_attributes.flow attributes: action: details: In the case of yum, it has 2 action plugins that use it under the hood, M(ansible.builtin.yum) and M(ansible.builtin.package). support: partial async: support: none bypass_host_loop: support: none check_mode: support: full diff_mode: support: full platform: platforms: rhel notes: - When used with a C(loop:) each package will be processed individually, it is much more efficient to pass the list directly to the I(name) option. - In versions prior to 1.9.2 this module installed and removed each package given to the yum module separately. This caused problems when packages specified by filename or url had to be installed or removed together. In 1.9.2 this was fixed so that packages are installed in one yum transaction. However, if one of the packages adds a new yum repository that the other packages come from (such as epel-release) then that package needs to be installed in a separate task. This mimics yum's command line behaviour. - 'Yum itself has two types of groups. "Package groups" are specified in the rpm itself while "environment groups" are specified in a separate file (usually by the distribution). Unfortunately, this division becomes apparent to ansible users because ansible needs to operate on the group of packages in a single transaction and yum requires groups to be specified in different ways when used in that way. Package groups are specified as "@development-tools" and environment groups are "@^gnome-desktop-environment". Use the "yum group list hidden ids" command to see which category of group the group you want to install falls into.' - 'The yum module does not support clearing yum cache in an idempotent way, so it was decided not to implement it, the only method is to use command and call the yum command directly, namely "command: yum clean all" https://github.com/ansible/ansible/pull/31450#issuecomment-352889579' # informational: requirements for nodes requirements: - yum author: - Ansible Core Team - Seth Vidal (@skvidal) - Eduard Snesarev (@verm666) - Berend De Schouwer (@berenddeschouwer) - Abhijeet Kasurde (@Akasurde) - Adam Miller (@maxamillion) a