# SPDX-FileCopyrightText: 2014-2022 Fredrik Ahlberg, Angus Gratton,
# Espressif Systems (Shanghai) CO LTD, other contributors as noted.
#
# SPDX-License-Identifier: GPL-2.0-or-later

import hashlib
import io
import os
import struct
import sys
import time
import zlib

from .bin_image import ELFFile, ImageSegment, LoadFirmwareImage
from .bin_image import (
    ESP32C2FirmwareImage,
    ESP32C3FirmwareImage,
    ESP32C6BETAFirmwareImage,
    ESP32FirmwareImage,
    ESP32H2BETA1FirmwareImage,
    ESP32H2BETA2FirmwareImage,
    ESP32S2FirmwareImage,
    ESP32S3BETA2FirmwareImage,
    ESP32S3FirmwareImage,
    ESP8266ROMFirmwareImage,
    ESP8266V2FirmwareImage,
    ESP8266V3FirmwareImage,
)
from .loader import (
    DEFAULT_CONNECT_ATTEMPTS,
    DEFAULT_TIMEOUT,
    ERASE_WRITE_TIMEOUT_PER_MB,
    ESPLoader,
    timeout_per_mb,
)
from .targets import CHIP_DEFS, CHIP_LIST, ROM_LIST
from .util import (
    FatalError,
    NotImplementedInROMError,
    NotSupportedError,
    UnsupportedCommandError,
)
from .util import (
    div_roundup,
    flash_size_bytes,
    hexify,
    pad_to,
    print_overwrite,
)

DETECTED_FLASH_SIZES = {
    0x12: "256KB",
    0x13: "512KB",
    0x14: "1MB",
    0x15: "2MB",
    0x16: "4MB",
    0x17: "8MB",
    0x18: "16MB",
    0x19: "32MB",
    0x1A: "64MB",
    0x21: "128MB",
}

FLASH_MODES = {"qio": 0, "qout": 1, "dio": 2, "dout": 3}


def detect_chip(
    port=ESPLoader.DEFAULT_PORT,
    baud=ESPLoader.ESP_ROM_BAUD,
    connect_mode="default_reset",
    trace_enabled=False,
    connect_attempts=DEFAULT_CONNECT_ATTEMPTS,
):
    """Use serial access to detect the chip type.

    First, get_security_info command is sent to detect the ID of the chip
    (supported only by ESP32-C3 and later, works even in the Secure Download Mode).
    If this fails, we reconnect and fall-back to reading the magic number.
    It's mapped at a specific ROM address and has a different value on each chip model.
    This way we use one memory read and compare it to the magic number for each chip.

    This routine automatically performs ESPLoader.connect() (passing
    connect_mode parameter) as part of querying the chip.
    """
    inst = None
    detect_port = ESPLoader(port, baud, trace_enabled=trace_enabled)
    if detect_port.serial_port.startswith("rfc2217:"):
        detect_port.USES_RFC2217 = True
    detect_port.connect(connect_mode, connect_attempts, detecting=True)
    try:
        print("Detecting chip type...", end="")
        res = detect_port.check_command(
            "get security info", ESPLoader.ESP_GET_SECURITY_INFO, b""
        )
        # 4b flags, 1b flash_crypt_cnt, 7*1b key_purposes, 4b chip_id
        res = struct.unpack("<IBBBBBBBBI", res[:16])
        chip_id = res[9]  # 2/4 status bytes invariant

        for cls in ROM_LIST[3:]:
            # cmd not supported on ESP8266 and ESP32 + ESP32-S2 doesn't return chip_id
            if chip_id == cls.IMAGE_CHIP_ID:
                inst = cls(detect_port._port, baud, trace_enabled=trace_enabled)
                inst._post_connect()
                try:
                    inst.read_reg(
                        ESPLoader.CHIP_DETECT_MAGIC_REG_ADDR
                    )  # Dummy read to check Secure Download mode
                except UnsupportedCommandError:
                    inst.secure_download_mode = True
    except (UnsupportedCommandError, struct.error, FatalError) as e:
        # UnsupportedCommmanddError: ESP8266/ESP32 ROM
        # struct.error: ESP32-S2
        # FatalError: ESP8266/ESP32 STUB
        print(" Unsupported detection protocol, switching and trying again...")
        try:
            # ESP32/ESP8266 are reset after an unsupported command, need to reconnect
            # (not needed on ESP32-S2)
            if not isinstance(e, struct.error):
                detect_port.connect(
                    connect_mode, connect_attempts, detecting=True, warnings=False
                )
            print("Detecting chip type...", end="")
            sys.stdout.flush()
            chip_magic_value = detect_port.read_reg(
                ESPLoader.CHIP_DETECT_MAGIC_REG_ADDR
            )

            for cls in ROM_LIST:
                if chip_magic_value in cls.CHIP_DETECT_MAGIC_VALUE:
                    inst = cls(detect_port._port, baud, trace_enabled=trace_enabled)
                    inst._post_connect()
                    inst.check_chip_id()
        except UnsupportedCommandError:
            raise FatalError(
                "Unsupported Command Error received. "
                "Probably this means Secure Download Mode is enabled, "
                "autodetection will not work. Need to manually specify the chip."
            )
    finally:
        if inst is not None:
            print(" %s" % inst.CHIP_NAME, end="")
            if detect_port.sync_stub_detected:
                inst = inst.STUB_CLASS(inst)
                inst.sync_stub_detected = True
            print("")  # end line
            return inst
    raise FatalError(
        "Unexpected CHIP magic value 0x%08x. Failed to autodetect chip type."
        % (chip_magic_value)
    )


# "Operation" commands, executable at command line. One function each
#
# Each function takes either two args (<ESPLoader instance>, <args>) or a single <args>
# argument.


def load_ram(esp, args):
    image = LoadFirmwareImage(esp.CHIP_NAME, args.filename)

    print("RAM boot...")
    for seg in image.segments:
        size = len(seg.data)
        print("Downloading %d bytes at %08x..." % (size, seg.addr), end=" ")
        sys.stdout.flush()
        esp.mem_begin(
            size, div_roundup(size, esp.ESP_RAM_BLOCK), esp.ESP_RAM_BLOCK, seg.addr
        )

        seq = 0
        while len(seg.data) > 0:
            esp.mem_block(seg.data[0 : esp.ESP_RAM_BLOCK], seq)
            seg.data = seg.data[esp.ESP_RAM_BLOCK :]
            seq += 1
        print("done!")

    print("All segments done, executing at %08x" % image.entrypoint)
    esp.mem_finish(image.entrypoint)


def read_mem(esp, args):
    print("0x%08x = 0x%08x" % (args.address, esp.read_reg(args.address)))


def write_mem(esp, args):
    esp.write_reg(args.address, args.value, args.mask, 0)
    print("Wrote %08x, mask %08x to %08x" % (args.value, args.mask, args.address))


def dump_mem(esp, args):
    with open(args.filename, "wb") as f:
        for i in range(args.size // 4):
            d = esp.read_reg(args.address + (i * 4))
            f.write(struct.pack(b"<I", d))
            if f.tell() % 1024 == 0:
                print_overwrite(
                    "%d bytes read... (%d %%)" % (f.tell(), f.tell() * 100 // args.size)
                )
            sys.stdout.flush()
        print_overwrite("Read %d bytes" % f.tell(), last_line=True)
    print("Done!")


def detect_flash_size(esp, args):
    if args.flash_size == "detect":
        if esp.secure_download_mode:
            raise FatalError(
                "Detecting flash size is not supported in secure download mode. "
                "Need to manually specify flash size."
            )
        flash_id = esp.flash_id()
        size_id = flash_id >> 16
        args.flash_size = DETECTED_FLASH_SIZES.get(size_id)
        if args.flash_size is None:
            print(
                "Warning: Could not auto-detect Flash size (FlashID=0x%x, SizeID=0x%x),"
                " defaulting to 4MB" % (flash_id, size_id)
            )
            args.flash_size = "4MB"
        else:
            print("Auto-detected Flash size:", args.flash_size)


def _update_image_flash_params(esp, address, args, image):
    """
    Modify the flash mode & size bytes if this looks like an executable bootloader image
    """
    if len(image) < 8:
        return image  # not long enough to be a bootloader image

    # unpack the (potential) image header
    magic, _, flash_mode, flash_size_freq = struct.unpack("BBBB", image[:4])
    if address != esp.BOOTLOADER_FLASH_OFFSET:
        return image  # not flashing bootloader offset, so don't modify this

    if (args.flash_mode, args.flash_freq, args.flash_size) == ("keep",) * 3:
        return image  # all settings are 'keep', not modifying anything

    # easy check if this is an image: does it start with a magic byte?
    if magic != esp.ESP_IMAGE_MAGIC:
        print(
            "Warning: Image file at 0x%x doesn't look like an image file, "
            "so not changing any flash settings." % address
        )
        return image

    # make sure this really is an image, and not just data that
    # starts with esp.ESP_IMAGE_MAGIC (mostly a problem for encrypted
    # images that happen to start with a magic byte
    try:
        test_image = esp.BOOTLOADER_IMAGE(io.BytesIO(image))
        test_image.verify()
    except Exception:
        print(
            "Warning: Image file at 0x%x is not a valid %s image, "
            "so not changing any flash settings." % (address, esp.CHIP_NAME)
        )
        return image

    # After the 8-byte header comes the extended header for chips others than ESP8266.
    # The 15th byte of the extended header indicates if the image is protected by
    # a SHA256 checksum. In that case we should not modify the header because
    # the checksum check would fail.
    sha_implies_keep = args.chip != "esp8266" and image[8 + 15] == 1

    def print_keep_warning(arg_to_keep, arg_used):
        print(
            "Warning: Image file at {addr} is protected with a hash checksum, "
            "so not changing the flash {arg} setting. "
            "Use the --flash_{arg}=keep option instead of --flash_{arg}={arg_orig} "
            "in order to remove this warning, or use the --dont-append-digest option "
            "for the elf2image command in order to generate an image file "
            "without a hash checksum".format(
                addr=hex(address), arg=arg_to_keep, arg_orig=arg_used
            )
        )

    if args.flash_mode != "keep":
        new_flash_mode = FLASH_MODES[args.flash_mode]
        if flash_mode != new_flash_mode and sha_implies_keep:
            print_keep_warning("mode", args.flash_mode)
        else:
            flash_mode = new_flash_mode

    flash_freq = flash_size_freq & 0x0F
    if args.flash_freq != "keep":
        new_flash_freq = esp.parse_flash_freq_arg(args.flash_freq)
        if flash_freq != new_flash_freq and sha_implies_keep:
            print_keep_warning("frequency", args.flash_freq)
        else:
            flash_freq = new_flash_freq

    flash_size = flash_size_freq & 0xF0
    if args.flash_size != "keep":
        new_flash_size = esp.parse_flash_size_arg(args.flash_size)
        if flash_size != new_flash_size and sha_implies_keep:
            print_keep_warning("size", args.flash_size)
        else:
            flash_size = new_flash_size

    flash_params = struct.pack(b"BB", flash_mode, flash_size + flash_freq)
    if flash_params != image[2:4]:
        print("Flash params set to 0x%04x" % struct.unpack(">H", flash_params))
        image = image[0:2] + flash_params + image[4:]
    return image


def write_flash(esp, args):
    # set args.compress based on default behaviour:
    # -> if either --compress or --no-compress is set, honour that
    # -> otherwise, set --compress unless --no-stub is set
    if args.compress is None and not args.no_compress:
        args.compress = not args.no_stub

    if (
        not args.force
        and esp.CHIP_NAME != "ESP8266"
        and not esp.secure_download_mode
        and esp.get_secure_boot_enabled()
    ):
        for address, _ in args.addr_filename:
            if address < 0x8000:
                raise FatalError(
                    "Secure Boot detected, writing to flash regions < 0x8000 "
                    "is disabled to protect the bootloader. "
                    "Use --force to override, "
                    "please use with caution, otherwise it may brick your device!"
                )

    # In case we have encrypted files to write,
    # we first do few sanity checks before actual flash
    if args.encrypt or args.encrypt_files is not None:
        do_write = True

        if not esp.secure_download_mode:
            if esp.get_encrypted_download_disabled():
                raise FatalError(
                    "This chip has encrypt functionality "
                    "in UART download mode disabled. "
                    "This is the Flash Encryption configuration for Production mode "
                    "instead of Development mode."
                )

            crypt_cfg_efuse = esp.get_flash_crypt_config()

            if crypt_cfg_efuse is not None and crypt_cfg_efuse != 0xF:
                print("Unexpected FLASH_CRYPT_CONFIG value: 0x%x" % (crypt_cfg_efuse))
                do_write = False

            enc_key_valid = esp.is_flash_encryption_key_valid()

            if not enc_key_valid:
                print("Flash encryption key is not programmed")
                do_write = False

        # Determine which files list contain the ones to encrypt
        files_to_encrypt = args.addr_filename if args.encrypt else args.encrypt_files

        for address, argfile in files_to_encrypt:
            if address % esp.FLASH_ENCRYPTED_WRITE_ALIGN:
                print(
                    "File %s address 0x%x is not %d byte aligned, can't flash encrypted"
                    % (argfile.name, address, esp.FLASH_ENCRYPTED_WRITE_ALIGN)
                )
                do_write = False

        if not do_write and not args.ignore_flash_encryption_efuse_setting:
            raise FatalError(
                "Can't perform encrypted flash write, "
                "consult Flash Encryption documentation for more information"
            )

    # verify file sizes fit in flash
    if args.flash_size != "keep":  # TODO: check this even with 'keep'
        flash_end = flash_size_bytes(args.flash_size)
        for address, argfile in args.addr_filename:
            argfile.seek(0, os.SEEK_END)
            if address + argfile.tell() > flash_end:
                raise FatalError(
                    "File %s (length %d) at offset %d "
                    "will not fit in %d bytes of flash. "
                    "Use --flash_size argument, or change flashing address."
                    % (argfile.name, argfile.tell(), address, flash_end)
                )
            argfile.seek(0)

    if args.erase_all:
        erase_flash(esp, args)
    else:
        for address, argfile in args.addr_filename:
            argfile.seek(0, os.SEEK_END)
            write_end = address + argfile.tell()
            argfile.seek(0)
            bytes_over = address % esp.FLASH_SECTOR_SIZE
            if bytes_over != 0:
                print(
                    "WARNING: Flash address {:#010x} is not aligned "
                    "to a {:#x} byte flash sector. "
                    "{:#x} bytes before this address will be erased.".format(
                        address, esp.FLASH_SECTOR_SIZE, bytes_over
                    )
                )
            # Print the address range of to-be-erased flash memory region
            print(
                "Flash will be erased from {:#010x} to {:#010x}...".format(
                    address - bytes_over,
                    div_roundup(write_end, esp.FLASH_SECTOR_SIZE)
                    * esp.FLASH_SECTOR_SIZE
                    - 1,
                )
            )

    """ Create a list describing all the files we have to flash.
    Each entry holds an "encrypt" flag marking whether the file needs encryption or not.
    This list needs to be sorted.

    First, append to each entry of our addr_filename list the flag args.encrypt
    E.g., if addr_filename is [(0x1000, "partition.bin"), (0x8000, "bootloader")],
    all_files will be [
        (0x1000, "partition.bin", args.encrypt),
        (0x8000, "bootloader", args.encrypt)
        ],
    where, of course, args.encrypt is either True or False
    """
    all_files = [
        (offs, filename, args.encrypt) for (offs, filename) in args.addr_filename
    ]

    """
    Now do the same with encrypt_files list, if defined.
    In this case, the flag is True
    """
    if args.encrypt_files is not None:
        encrypted_files_flag = [
            (offs, filename, True) for (offs, filename) in args.encrypt_files
        ]

        # Concatenate both lists and sort them.
        # As both list are already sorted, we could simply do a merge instead,
        # but for the sake of simplicity and because the lists are very small,
        # let's use sorted.
        all_files = sorted(all_files + encrypted_files_flag, key=lambda x: x[0])

    for address, argfile, encrypted in all_files:
        compress = args.compress

        # Check whether we can compress the current file before flashing
        if compress and encrypted:
            print("\nWARNING: - compress and encrypt options are mutually exclusive ")
            print("Will flash %s uncompressed" % argfile.name)
            compress = False

        if args.no_stub:
            print("Erasing flash...")
        image = pad_to(
            argfile.read(), esp.FLASH_ENCRYPTED_WRITE_ALIGN if encrypted else 4
        )
        if len(image) == 0:
            print("WARNING: File %s is empty" % argfile.name)
            continue
        image = _update_image_flash_params(esp, address, args, image)
        calcmd5 = hashlib.md5(image).hexdigest()
        uncsize = len(image)
        if compress:
            uncimage = image
            image = zlib.compress(uncimage, 9)
            # Decompress the compressed binary a block at a time,
            # to dynamically calculate the timeout based on the real write size
            decompress = zlib.decompressobj()
            blocks = esp.flash_defl_begin(uncsize, len(image), address)
        else:
            blocks = esp.flash_begin(uncsize, address, begin_rom_encrypted=encrypted)
        argfile.seek(0)  # in case we need it again
        seq = 0
        bytes_sent = 0  # bytes sent on wire
        bytes_written = 0  # bytes written to flash
        t = time.time()

        timeout = DEFAULT_TIMEOUT

        while len(image) > 0:
            print_overwrite(
                "Writing at 0x%08x... (%d %%)"
                % (address + bytes_written, 100 * (seq + 1) // blocks)
            )
            sys.stdout.flush()
            block = image[0 : esp.FLASH_WRITE_SIZE]
            if compress:
                # feeding each compressed block into the decompressor lets us
                # see block-by-block how much will be written
                block_uncompressed = len(decompress.decompress(block))
                bytes_written += block_uncompressed
                block_timeout = max(
                    DEFAULT_TIMEOUT,
                    timeout_per_mb(ERASE_WRITE_TIMEOUT_PER_MB, block_uncompressed),
                )
                if not esp.IS_STUB:
                    timeout = (
                        block_timeout  # ROM code writes block to flash before ACKing
                    )
                esp.flash_defl_block(block, seq, timeout=timeout)
                if esp.IS_STUB:
                    # Stub ACKs when block is received,
                    # then writes to flash while receiving the block after it
                    timeout = block_timeout
            else:
                # Pad the last block
                block = block + b"\xff" * (esp.FLASH_WRITE_SIZE - len(block))
                if encrypted:
                    esp.flash_encrypt_block(block, seq)
                else:
                    esp.flash_block(block, seq)
                bytes_written += len(block)
            bytes_sent += len(block)
            image = image[esp.FLASH_WRITE_SIZE :]
            seq += 1

        if esp.IS_STUB:
            # Stub only writes each block to flash after 'ack'ing the receive,
            # so do a final dummy operation which will not be 'ack'ed
            # until the last block has actually been written out to flash
            esp.read_reg(ESPLoader.CHIP_DETECT_MAGIC_REG_ADDR, timeout=timeout)

        t = time.time() - t
        speed_msg = ""
        if compress:
            if t > 0.0:
                speed_msg = " (effective %.1f kbit/s)" % (uncsize / t * 8 / 1000)
            print_overwrite(
                "Wrote %d bytes (%d compressed) at 0x%08x in %.1f seconds%s..."
                % (uncsize, bytes_sent, address, t, speed_msg),
                last_line=True,
            )
        else:
            if t > 0.0:
                speed_msg = " (%.1f kbit/s)" % (bytes_written / t * 8 / 1000)
            print_overwrite(
                "Wrote %d bytes at 0x%08x in %.1f seconds%s..."
                % (bytes_written, address, t, speed_msg),
                last_line=True,
            )

        if not encrypted and not esp.secure_download_mode:
            try:
                res = esp.flash_md5sum(address, uncsize)
                if res != calcmd5:
                    print("File  md5: %s" % calcmd5)
                    print("Flash md5: %s" % res)
                    print(
                        "MD5 of 0xFF is %s"
                        % (hashlib.md5(b"\xFF" * uncsize).hexdigest())
                    )
                    raise FatalError("MD5 of file does not match data in flash!")
                else:
                    print("Hash of data verified.")
            except NotImplementedInROMError:
                pass

    print("\nLeaving...")

    if esp.IS_STUB:
        # skip sending flash_finish to ROM loader here,
        # as it causes the loader to exit and run user code
        esp.flash_begin(0, 0)

        # Get the "encrypted" flag for the last file flashed
        # Note: all_files list contains triplets like:
        # (address: Integer, filename: String, encrypted: Boolean)
        last_file_encrypted = all_files[-1][2]

        # Check whether the last file flashed was compressed or not
        if args.compress and not last_file_encrypted:
            esp.flash_defl_finish(False)
        else:
            esp.flash_finish(False)

    if args.verify:
        print("Verifying just-written flash...")
        print(
            "(This option is deprecated, "
            "flash contents are now always read back after flashing.)"
        )
        # If some encrypted files have been flashed,
        # print a warning saying that we won't check them
        if args.encrypt or args.encrypt_files is not None:
            print("WARNING: - cannot verify encrypted files, they will be ignored")
        # Call verify_flash function only if there is at least
        # one non-encrypted file flashed
        if not args.encrypt:
            verify_flash(esp, args)


def image_info(args):
    def v2():
        def get_key_from_value(dict, val):
            """Get key from value in dictionary"""
            for key, value in dict.items():
                if value == val:
                    return key
            return None

        title = "{} image header".format(args.chip.upper())
        print(title)
        print("=" * len(title))
        print("Image version: {}".format(image.version))
        print(
            "Entry point: {:#8x}".format(image.entrypoint)
            if image.entrypoint != 0
            else "Entry point not set"
        )

        print("Segments: {}".format(len(image.segments)))

        # Flash size
        flash_s_bits = image.flash_size_freq & 0xF0  # high four bits
        flash_s = get_key_from_value(image.ROM_LOADER.FLASH_SIZES, flash_s_bits)
        print(
            "Flash size: {}".format(flash_s)
            if flash_s is not None
            else "WARNING: Invalid flash size ({:#02x})".format(flash_s_bits)
        )

        # Flash frequency
        flash_fr_bits = image.flash_size_freq & 0x0F  # low four bits
        flash_fr = get_key_from_value(image.ROM_LOADER.FLASH_FREQUENCY, flash_fr_bits)
        print(
            "Flash freq: {}".format(flash_fr)
            if flash_fr is not None
            else "WARNING: Invalid flash frequency ({:#02x})".format(flash_fr_bits)
        )

        # Flash mode
        flash_mode = get_key_from_value(FLASH_MODES, image.flash_mode)
        print(
            "Flash mode: {}".format(flash_mode.upper())
            if flash_mode is not None
            else "WARNING: Invalid flash mode ({})".format(image.flash_mode)
        )

        # Extended header (ESP32 and later only)
        if args.chip != "esp8266":
            print()
            title = "{} extended image header".format(args.chip.upper())
            print(title)
            print("=" * len(title))
            print("WP pin: {:#02x}".format(image.wp_pin))
            print(
                "Flash pins drive settings: "
                "clk_drv: {:#02x}, q_drv: {:#02x}, d_drv: {:#02x}, "
                "cs0_drv: {:#02x}, hd_drv: {:#02x}, wp_drv: {:#02x}".format(
                    image.clk_drv,
                    image.q_drv,
                    image.d_drv,
                    image.cs_drv,
                    image.hd_drv,
                    image.wp_drv,
                )
            )
            print("Chip ID: {}".format(image.chip_id))
            print("Minimal chip revision: {}".format(image.min_rev))
        print()

        # Segments overview
        title = "Segments information"
        print(title)
        print("=" * len(title))
        headers_str = "{:>7}  {:>7}  {:>10}  {:>10}  {:10}"
        print(
            headers_str.format(
                "Segment", "Length", "Load addr", "File offs", "Memory types"
            )
        )
        print(
            "{}  {}  {}  {}  {}".format("-" * 7, "-" * 7, "-" * 10, "-" * 10, "-" * 12)
        )
        format_str = "{:7}  {:#07x}  {:#010x}  {:#010x}  {}"
        for idx, seg in enumerate(image.segments, start=1):
            segs = seg.get_memory_type(image)
            seg_name = ", ".join(segs)
            print(
                format_str.format(idx, len(seg.data), seg.addr, seg.file_offs, seg_name)
            )
        print()

        # Footer
        title = "Image footer"
        print(title)
        print("=" * len(title))
        calc_checksum = image.calculate_checksum()
        print(
            "Checksum: {:#02x} ({})".format(
                image.checksum,
                "valid"
                if image.checksum == calc_checksum
                else "invalid - calculated {:02x}".format(calc_checksum),
            )
        )
        try:
            digest_msg = "Not appended"
            if image.append_digest:
                is_valid = image.stored_digest == image.calc_digest
                digest_msg = "{} ({})".format(
                    hexify(image.calc_digest).lower(),
                    "valid" if is_valid else "invalid",
                )
                print("Validation hash: {}".format(digest_msg))
        except AttributeError:
            pass  # ESP8266 image has no append_digest field

    if args.chip == "auto":
        print("WARNING: --chip not specified, defaulting to ESP8266.")
        args.chip = "esp8266"
    image = LoadFirmwareImage(args.chip, args.filename)

    if args.version == "2":
        v2()
        return

    print("Image version: {}".format(image.version))
    print(
        "Entry point: {:8x}".format(image.entrypoint)
        if image.entrypoint != 0
        else "Entry point not set"
    )
    print("{} segments".format(len(image.segments)))
    print()
    idx = 0
    for seg in image.segments:
        idx += 1
        segs = seg.get_memory_type(image)
        seg_name = ",".join(segs)
        print("Segment {}: {} [{}]".format(idx, seg, seg_name))
    calc_checksum = image.calculate_checksum()
    print(
        "Checksum: {:02x} ({})".format(
            image.checksum,
            "valid"
            if image.checksum == calc_checksum
            else "invalid - calculated {:02x}".format(calc_checksum),
        )
    )
    try:
        digest_msg = "Not appended"
        if image.append_digest:
            is_valid = image.stored_digest == image.calc_digest
            digest_msg = "{} ({})".format(
                hexify(image.calc_digest).lower(),
                "valid" if is_valid else "invalid",
            )
            print("Validation Hash: {}".format(digest_msg))
    except AttributeError:
        pass  # ESP8266 image has no append_digest field


def make_image(args):
    image = ESP8266ROMFirmwareImage()
    if len(args.segfile) == 0:
        raise FatalError("No segments specified")
    if len(args.segfile) != len(args.segaddr):
        raise FatalError(
            "Number of specified files does not match number of specified addresses"
        )
    for (seg, addr) in zip(args.segfile, args.segaddr):
        with open(seg, "rb") as f:
            data = f.read()
            image.segments.append(ImageSegment(addr, data))
    image.entrypoint = args.entrypoint
    image.save(args.output)


def elf2image(args):
    e = ELFFile(args.input)
    if args.chip == "auto":  # Default to ESP8266 for backwards compatibility
        args.chip = "esp8266"

    print("Creating {} image...".format(args.chip))

    if args.chip == "esp32":
        image = ESP32FirmwareImage()
        if args.secure_pad:
            image.secure_pad = "1"
        elif args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32s2":
        image = ESP32S2FirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32s3beta2":
        image = ESP32S3BETA2FirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32s3":
        image = ESP32S3FirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32c3":
        image = ESP32C3FirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32c6beta":
        image = ESP32C6BETAFirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32h2beta1":
        image = ESP32H2BETA1FirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32h2beta2":
        image = ESP32H2BETA2FirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.chip == "esp32c2":
        image = ESP32C2FirmwareImage()
        if args.secure_pad_v2:
            image.secure_pad = "2"
    elif args.version == "1":  # ESP8266
        image = ESP8266ROMFirmwareImage()
    elif args.version == "2":
        image = ESP8266V2FirmwareImage()
    else:
        image = ESP8266V3FirmwareImage()
    image.entrypoint = e.entrypoint
    image.flash_mode = FLASH_MODES[args.flash_mode]

    if args.chip != "esp8266":
        image.min_rev = args.min_rev
        image.append_digest = args.append_digest

    if args.flash_mmu_page_size:
        image.set_mmu_page_size(flash_size_bytes(args.flash_mmu_page_size))

    # ELFSection is a subclass of ImageSegment, so can use interchangeably
    image.segments = e.segments if args.use_segments else e.sections

    image.flash_size_freq = image.ROM_LOADER.parse_flash_size_arg(args.flash_size)
    image.flash_size_freq += image.ROM_LOADER.parse_flash_freq_arg(args.flash_freq)

    if args.elf_sha256_offset:
        image.elf_sha256 = e.sha256()
        image.elf_sha256_offset = args.elf_sha256_offset

    before = len(image.segments)
    image.merge_adjacent_segments()
    if len(image.segments) != before:
        delta = before - len(image.segments)
        print("Merged %d ELF section%s" % (delta, "s" if delta > 1 else ""))

    image.verify()

    if args.output is None:
        args.output = image.default_output_name(args.input)
    image.save(args.output)

    print("Successfully created {} image.".format(args.chip))


def read_mac(esp, args):
    mac = esp.read_mac()

    def print_mac(label, mac):
        print("%s: %s" % (label, ":".join(map(lambda x: "%02x" % x, mac))))

    print_mac("MAC", mac)


def chip_id(esp, args):
    try:
        chipid = esp.chip_id()
        print("Chip ID: 0x%08x" % chipid)
    except NotSupportedError:
        print("Warning: %s has no Chip ID. Reading MAC instead." % esp.CHIP_NAME)
        read_mac(esp, args)


def erase_flash(esp, args):
    if not args.force and esp.CHIP_NAME != "ESP8266" and not esp.secure_download_mode:
        if esp.get_flash_encryption_enabled() or esp.get_secure_boot_enabled():
            raise FatalError(
                "Active security features detected, "
                "erasing flash is disabled as a safety measure. "
                "Use --force to override, "
                "please use with caution, otherwise it may brick your device!"
            )
    print("Erasing flash (this may take a while)...")
    t = time.time()
    esp.erase_flash()
    print("Chip erase completed successfully in %.1fs" % (time.time() - t))


def erase_region(esp, args):
    if not args.force and esp.CHIP_NAME != "ESP8266" and not esp.secure_download_mode:
        if esp.get_flash_encryption_enabled() or esp.get_secure_boot_enabled():
            raise FatalError(
                "Active security features detected, "
                "erasing flash is disabled as a safety measure. "
                "Use --force to override, "
                "please use with caution, otherwise it may brick your device!"
            )
    print("Erasing region (may be slow depending on size)...")
    t = time.time()
    esp.erase_region(args.address, args.size)
    print("Erase completed successfully in %.1f seconds." % (time.time() - t))


def run(esp, args):
    esp.run()


def flash_id(esp, args):
    flash_id = esp.flash_id()
    print("Manufacturer: %02x" % (flash_id & 0xFF))
    flid_lowbyte = (flash_id >> 16) & 0xFF
    print("Device: %02x%02x" % ((flash_id >> 8) & 0xFF, flid_lowbyte))
    print(
        "Detected flash size: %s" % (DETECTED_FLASH_SIZES.get(flid_lowbyte, "Unknown"))
    )


def read_flash(esp, args):
    if args.no_progress:
        flash_progress = None
    else:

        def flash_progress(progress, length):
            msg = "%d (%d %%)" % (progress, progress * 100.0 / length)
            padding = "\b" * len(msg)
            if progress == length:
                padding = "\n"
            sys.stdout.write(msg + padding)
            sys.stdout.flush()

    t = time.time()
    data = esp.read_flash(args.address, args.size, flash_progress)
    t = time.time() - t
    speed_msg = " ({:.1f} kbit/s)".format(len(data) / t * 8 / 1000) if t > 0.0 else ""
    print_overwrite(
        "Read {:d} bytes at {:#010x} in {:.1f} seconds{}...".format(
            len(data), args.address, t, speed_msg
        ),
        last_line=True,
    )
    with open(args.filename, "wb") as f:
        f.write(data)


def verify_flash(esp, args):
    differences = False

    for address, argfile in args.addr_filename:
        image = pad_to(argfile.read(), 4)
        argfile.seek(0)  # rewind in case we need it again

        image = _update_image_flash_params(esp, address, args, image)

        image_size = len(image)
        print(
            "Verifying 0x%x (%d) bytes @ 0x%08x in flash against %s..."
            % (image_size, image_size, address, argfile.name)
        )
        # Try digest first, only read if there are differences.
        digest = esp.flash_md5sum(address, image_size)
        expected_digest = hashlib.md5(image).hexdigest()
        if digest == expected_digest:
            print("-- verify OK (digest matched)")
            continue
        else:
            differences = True
            if getattr(args, "diff", "no") != "yes":
                print("-- verify FAILED (digest mismatch)")
                continue

        flash = esp.read_flash(address, image_size)
        assert flash != image
        diff = [i for i in range(image_size) if flash[i] != image[i]]
        print(
            "-- verify FAILED: %d differences, first @ 0x%08x"
            % (len(diff), address + diff[0])
        )
        for d in diff:
            flash_byte = flash[d]
            image_byte = image[d]
            print("   %08x %02x %02x" % (address + d, flash_byte, image_byte))
    if differences:
        raise FatalError("Verify failed.")


def read_flash_status(esp, args):
    print("Status value: 0x%04x" % esp.read_status(args.bytes))


def write_flash_status(esp, args):
    fmt = "0x%%0%dx" % (args.bytes * 2)
    args.value = args.value & ((1 << (args.bytes * 8)) - 1)
    print(("Initial flash status: " + fmt) % esp.read_status(args.bytes))
    print(("Setting flash status: " + fmt) % args.value)
    esp.write_status(args.value, args.bytes, args.non_volatile)
    print(("After flash status:   " + fmt) % esp.read_status(args.bytes))


def get_security_info(esp, args):
    si = esp.get_security_info()
    # TODO: better display and tests
    print("Flags: {:#010x} ({})".format(si["flags"], bin(si["flags"])))
    print("Flash_Crypt_Cnt: {:#x}".format(si["flash_crypt_cnt"]))
    print("Key_Purposes: {}".format(si["key_purposes"]))
    if si["chip_id"] is not None and si["api_version"] is not None:
        print("Chip_ID: {}".format(si["chip_id"]))
        print("Api_Version: {}".format(si["api_version"]))


def merge_bin(args):
    try:
        chip_class = CHIP_DEFS[args.chip]
    except KeyError:
        msg = (
            "Please specify the chip argument"
            if args.chip == "auto"
            else "Invalid chip choice: '{}'".format(args.chip)
        )
        msg = msg + " (choose from {})".format(", ".join(CHIP_LIST))
        raise FatalError(msg)

    # sort the files by offset.
    # The AddrFilenamePairAction has already checked for overlap
    input_files = sorted(args.addr_filename, key=lambda x: x[0])
    if not input_files:
        raise FatalError("No input files specified")
    first_addr = input_files[0][0]
    if first_addr < args.target_offset:
        raise FatalError(
            "Output file target offset is 0x%x. Input file offset 0x%x is before this."
            % (args.target_offset, first_addr)
        )

    if args.format != "raw":
        raise FatalError(
            "This version of esptool only supports the 'raw' output format"
        )

    with open(args.output, "wb") as of:

        def pad_to(flash_offs):
            # account for output file offset if there is any
            of.write(b"\xFF" * (flash_offs - args.target_offset - of.tell()))

        for addr, argfile in input_files:
            pad_to(addr)
            image = argfile.read()
            image = _update_image_flash_params(chip_class, addr, args, image)
            of.write(image)
        if args.fill_flash_size:
            pad_to(flash_size_bytes(args.fill_flash_size))
        print(
            "Wrote 0x%x bytes to file %s, ready to flash to offset 0x%x"
            % (of.tell(), args.output, args.target_offset)
        )


def version(args):
    from . import __version__

    print(__version__)