 <<\_ACEOF || ac_write_fail=1
  as_fn_error $? "could not setup config headers machinery" "$LINENO" 5
fi # test -n "$CONFIG_HEADERS"


eval set X "  :F $CONFIG_FILES  :H $CONFIG_HEADERS  :L $CONFIG_LINKS  :C $CONFIG_COMMANDS"
shift
for ac_tag
do
  case $ac_tag in
  :[FHLC]) ac_mode=$ac_tag; continue;;
  esac
  case $ac_mode$ac_tag in
  :[FHL]*:*);;
  :L* | :C*:*) as_fn_error $? "invalid tag \`$ac_tag'" "$LINENO" 5;;
  :[FH]-) ac_tag=-:-;;
  :[FH]*) ac_tag=$ac_tag:$ac_tag.in;;
  esac
  ac_save_IFS=$IFS
  IFS=:
  set x $ac_tag
  IFS=$ac_save_IFS
  shift
  ac_file=$1
  shift

  case $ac_mode in
  :L) ac_source=$1;;
  :[FH])
    ac_file_inputs=
    for ac_f
    do
      case $ac_f in
      -) ac_f="$ac_tmp/stdin";;
      *) # Look for the file first in the build tree, then in the source tree
	 # (if the path is not absolute).  The absolute path cannot be DOS-style,
	 # because $ac_f cannot contain `:'.
	 test -f "$ac_f" ||
	   case $ac_f in
	   [\\/$]*) false;;
	   *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";;
	   esac ||
	   as_fn_error 1 "cannot find input file: \`$ac_f'" "$LINENO" 5;;
      esac
      case $ac_f in *\'*) ac_f=`$as_echo "$ac_f" | sed "s/'/'\\\\\\\\''/g"`;; esac
      as_fn_append ac_file_inputs " '$ac_f'"
    done

    # Let's still pretend it is `configure' which instantiates (i.e., don't
    # use $as_me), people would be surprised to read:
    #    /* config.h.  Generated by config.status.  */
    configure_input='Generated from '`
	  $as_echo "$*" | sed 's|^[^:]*/||;s|:[^:]*/|, |g'
	`' by configure.'
    if test x"$ac_file" != x-; then
      configure_input="$ac_file.  $configure_input"
      { $as_echo "$as_me:${as_lineno-$LINENO}: creating $ac_file" >&5
$as_echo "$as_me: creating $ac_file" >&6;}
    fi
    # Neutralize special characters interpreted by sed in replacement strings.
    case $configure_input in #(
    *\&* | *\|* | *\\* )
       ac_sed_conf_input=`$as_echo "$configure_input" |
       sed 's/[\\\\&|]/\\\\&/g'`;; #(
    *) ac_sed_conf_input=$configure_input;;
    esac

    case $ac_tag in
    *:-:* | *:-) cat >"$ac_tmp/stdin" \
      || as_fn_error $? "could not create $ac_file" "$LINENO" 5 ;;
    esac
    ;;
  esac

  ac_dir=`$as_dirname -- "$ac_file" ||
$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$ac_file" : 'X\(//\)[^/]' \| \
	 X"$ac_file" : 'X\(//\)$' \| \
	 X"$ac_file" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$ac_file" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
  as_dir="$ac_dir"; as_fn_mkdir_p
  ac_builddir=.

case "$ac_dir" in
.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;;
*)
  ac_dir_suffix=/`$as_echo "$ac_dir" | sed 's|^\.[\\/]||'`
  # A ".." for each directory in $ac_dir_suffix.
  ac_top_builddir_sub=`$as_echo "$ac_dir_suffix" | sed 's|/[^\\/]*|/..|g;s|/||'`
  case $ac_top_builddir_sub in
  "") ac_top_builddir_sub=. ac_top_build_prefix= ;;
  *)  ac_top_build_prefix=$ac_top_builddir_sub/ ;;
  esac ;;
esac
ac_abs_top_builddir=$ac_pwd
ac_abs_builddir=$ac_pwd$ac_dir_suffix
# for backward compatibility:
ac_top_builddir=$ac_top_build_prefix

case $srcdir in
  .)  # We are building in place.
    ac_srcdir=.
    ac_top_srcdir=$ac_top_builddir_sub
    ac_abs_top_srcdir=$ac_pwd ;;
  [\\/]* | ?:[\\/]* )  # Absolute name.
    ac_srcdir=$srcdir$ac_dir_suffix;
    ac_top_srcdir=$srcdir
    ac_abs_top_srcdir=$srcdir ;;
  *) # Relative name.
    ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix
    ac_top_srcdir=$ac_top_build_prefix$srcdir
    ac_abs_top_srcdir=$ac_pwd/$srcdir ;;
esac
ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix


  case $ac_mode in
  :F)
  #
  # CONFIG_FILE
  #

  case $INSTALL in
  [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;;
  *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;;
  esac
  ac_MKDIR_P=$MKDIR_P
  case $MKDIR_P in
  [\\/$]* | ?:[\\/]* ) ;;
  */*) ac_MKDIR_P=$ac_top_build_prefix$MKDIR_P ;;
  esac
_ACEOF

cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
# If the template does not know about datarootdir, expand it.
# FIXME: This hack should be removed a few years after 2.60.
ac_datarootdir_hack=; ac_datarootdir_seen=
ac_sed_dataroot='
/datarootdir/ {
  p
  q
}
/@datadir@/p
/@docdir@/p
/@infodir@/p
/@localedir@/p
/@mandir@/p'
case `eval "sed -n \"\$ac_sed_dataroot\" $ac_file_inputs"` in
*datarootdir*) ac_datarootdir_seen=yes;;
*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*)
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5
$as_echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;}
_ACEOF
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
  ac_datarootdir_hack='
  s&@datadir@&$datadir&g
  s&@docdir@&$docdir&g
  s&@infodir@&$infodir&g
  s&@localedir@&$localedir&g
  s&@mandir@&$mandir&g
  s&\\\${datarootdir}&$datarootdir&g' ;;
esac
_ACEOF

# Neutralize VPATH when `$srcdir' = `.'.
# Shell code in configure.ac might set extrasub.
# FIXME: do we really want to maintain this feature?
cat >>$CONFIG_STATUS <<_ACEOF || ac_write_fail=1
ac_sed_extra="$ac_vpsub
$extrasub
_ACEOF
cat >>$CONFIG_STATUS <<\_ACEOF || ac_write_fail=1
:t
/@[a-zA-Z_][a-zA-Z_0-9]*@/!b
s|@configure_input@|$ac_sed_conf_input|;t t
s&@top_builddir@&$ac_top_builddir_sub&;t t
s&@top_build_prefix@&$ac_top_build_prefix&;t t
s&@srcdir@&$ac_srcdir&;t t
s&@abs_srcdir@&$ac_abs_srcdir&;t t
s&@top_srcdir@&$ac_top_srcdir&;t t
s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t
s&@builddir@&$ac_builddir&;t t
s&@abs_builddir@&$ac_abs_builddir&;t t
s&@abs_top_builddir@&$ac_abs_top_builddir&;t t
s&@INSTALL@&$ac_INSTALL&;t t
s&@MKDIR_P@&$ac_MKDIR_P&;t t
$ac_datarootdir_hack
"
eval sed \"\$ac_sed_extra\" "$ac_file_inputs" | $AWK -f "$ac_tmp/subs.awk" \
  >$ac_tmp/out || as_fn_error $? "could not create $ac_file" "$LINENO" 5

test -z "$ac_datarootdir_hack$ac_datarootdir_seen" &&
  { ac_out=`sed -n '/\${datarootdir}/p' "$ac_tmp/out"`; test -n "$ac_out"; } &&
  { ac_out=`sed -n '/^[	 ]*datarootdir[	 ]*:*=/p' \
      "$ac_tmp/out"`; test -z "$ac_out"; } &&
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined" >&5
$as_echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir'
which seems to be undefined.  Please make sure it is defined" >&2;}

  rm -f "$ac_tmp/stdin"
  case $ac_file in
  -) cat "$ac_tmp/out" && rm -f "$ac_tmp/out";;
  *) rm -f "$ac_file" && mv "$ac_tmp/out" "$ac_file";;
  esac \
  || as_fn_error $? "could not create $ac_file" "$LINENO" 5
 ;;
  :H)
  #
  # CONFIG_HEADER
  #
  if test x"$ac_file" != x-; then
    {
      $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs"
    } >"$ac_tmp/config.h" \
      || as_fn_error $? "could not create $ac_file" "$LINENO" 5
    if diff "$ac_file" "$ac_tmp/config.h" >/dev/null 2>&1; then
      { $as_echo "$as_me:${as_lineno-$LINENO}: $ac_file is unchanged" >&5
$as_echo "$as_me: $ac_file is unchanged" >&6;}
    else
      rm -f "$ac_file"
      mv "$ac_tmp/config.h" "$ac_file" \
	|| as_fn_error $? "could not create $ac_file" "$LINENO" 5
    fi
  else
    $as_echo "/* $configure_input  */" \
      && eval '$AWK -f "$ac_tmp/defines.awk"' "$ac_file_inputs" \
      || as_fn_error $? "could not create -" "$LINENO" 5
  fi
# Compute "$ac_file"'s index in $config_headers.
_am_arg="$ac_file"
_am_stamp_count=1
for _am_header in $config_headers :; do
  case $_am_header in
    $_am_arg | $_am_arg:* )
      break ;;
    * )
      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
  esac
done
echo "timestamp for $_am_arg" >`$as_dirname -- "$_am_arg" ||
$as_expr X"$_am_arg" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$_am_arg" : 'X\(//\)[^/]' \| \
	 X"$_am_arg" : 'X\(//\)$' \| \
	 X"$_am_arg" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$_am_arg" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`/stamp-h$_am_stamp_count
 ;;
  :L)
  #
  # CONFIG_LINK
  #

  if test "$ac_source" = "$ac_file" && test "$srcdir" = '.'; then
    :
  else
    # Prefer the file from the source tree if names are identical.
    if test "$ac_source" = "$ac_file" || test ! -r "$ac_source"; then
      ac_source=$srcdir/$ac_source
    fi

    { $as_echo "$as_me:${as_lineno-$LINENO}: linking $ac_source to $ac_file" >&5
$as_echo "$as_me: linking $ac_source to $ac_file" >&6;}

    if test ! -r "$ac_source"; then
      as_fn_error $? "$ac_source: file not found" "$LINENO" 5
    fi
    rm -f "$ac_file"

    # Try a relative symlink, then a hard link, then a copy.
    case $ac_source in
    [\\/$]* | ?:[\\/]* ) ac_rel_source=$ac_source ;;
	*) ac_rel_source=$ac_top_build_prefix$ac_source ;;
    esac
    ln -s "$ac_rel_source" "$ac_file" 2>/dev/null ||
      ln "$ac_source" "$ac_file" 2>/dev/null ||
      cp -p "$ac_source" "$ac_file" ||
      as_fn_error $? "cannot link or copy $ac_source to $ac_file" "$LINENO" 5
  fi
 ;;
  :C)  { $as_echo "$as_me:${as_lineno-$LINENO}: executing $ac_file commands" >&5
$as_echo "$as_me: executing $ac_file commands" >&6;}
 ;;
  esac


  case $ac_file$ac_mode in
    "tests/atconfig":C) cat >tests/atconfig <<ATEOF
# Configurable variable values for building test suites.
# Generated by $0.
# Copyright (C) 2012 Free Software Foundation, Inc.

# The test suite will define top_srcdir=$at_top_srcdir/../.. etc.
at_testdir='tests'
abs_builddir='$ac_abs_builddir'
at_srcdir='$ac_srcdir'
abs_srcdir='$ac_abs_srcdir'
at_top_srcdir='$ac_top_srcdir'
abs_top_srcdir='$ac_abs_top_srcdir'
at_top_build_prefix='$ac_top_build_prefix'
abs_top_builddir='$ac_abs_top_builddir'

# Backward compatibility with Autotest <= 2.59b:
at_top_builddir=\$at_top_build_prefix

AUTOTEST_PATH='tests'

SHELL=\${CONFIG_SHELL-'$SHELL'}
ATEOF
 ;;
    "depfiles":C) test x"$AMDEP_TRUE" != x"" || {
  # Older Autoconf quotes --file arguments for eval, but not when files
  # are listed without --file.  Let's play safe and only enable the eval
  # if we detect the quoting.
  # TODO: see whether this extra hack can be removed once we start
  # requiring Autoconf 2.70 or later.
  case $CONFIG_FILES in #(
  *\'*) :
    eval set x "$CONFIG_FILES" ;; #(
  *) :
    set x $CONFIG_FILES ;; #(
  *) :
     ;;
esac
  shift
  # Used to flag and report bootstrapping failures.
  am_rc=0
  for am_mf
  do
    # Strip MF so we end up with the name of the file.
    am_mf=`$as_echo "$am_mf" | sed -e 's/:.*$//'`
    # Check whether this is an Automake generated Makefile which includes
    # dependency-tracking related rules and includes.
    # Grep'ing the whole file directly is not great: AIX grep has a line
    # limit of 2048, but all sed's we know have understand at least 4000.
    sed -n 's,^am--depfiles:.*,X,p' "$am_mf" | grep X >/dev/null 2>&1 \
      || continue
    am_dirpart=`$as_dirname -- "$am_mf" ||
$as_expr X"$am_mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \
	 X"$am_mf" : 'X\(//\)[^/]' \| \
	 X"$am_mf" : 'X\(//\)$' \| \
	 X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X"$am_mf" |
    sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)[^/].*/{
	    s//\1/
	    q
	  }
	  /^X\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
    am_filepart=`$as_basename -- "$am_mf" ||
$as_expr X/"$am_mf" : '.*/\([^/][^/]*\)/*$' \| \
	 X"$am_mf" : 'X\(//\)$' \| \
	 X"$am_mf" : 'X\(/\)' \| . 2>/dev/null ||
$as_echo X/"$am_mf" |
    sed '/^.*\/\([^/][^/]*\)\/*$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\/\)$/{
	    s//\1/
	    q
	  }
	  /^X\/\(\/\).*/{
	    s//\1/
	    q
	  }
	  s/.*/./; q'`
    { echo "$as_me:$LINENO: cd "$am_dirpart" \
      && sed -e '/# am--include-marker/d' "$am_filepart" \
        | $MAKE -f - am--depfiles" >&5
   (cd "$am_dirpart" \
      && sed -e '/# am--include-marker/d' "$am_filepart" \
        | $MAKE -f - am--depfiles) >&5 2>&5
   ac_status=$?
   echo "$as_me:$LINENO: \$? = $ac_status" >&5
   (exit $ac_status); } || am_rc=$?
  done
  if test $am_rc -ne 0; then
    { { $as_echo "$as_me:${as_lineno-$LINENO}: error: in \`$ac_pwd':" >&5
$as_echo "$as_me: error: in \`$ac_pwd':" >&2;}
as_fn_error $? "Something went wrong bootstrapping makefile fragments
    for automatic dependency tracking.  If GNU make was not used, consider
    re-running the configure script with MAKE=\"gmake\" (or whatever is
    necessary).  You can also try re-running configure with the
    '--disable-dependency-tracking' option to at least be able to build
    the package (albeit without support for automatic dependency tracking).
See \`config.log' for more details" "$LINENO" 5; }
  fi
  { am_dirpart=; unset am_dirpart;}
  { am_filepart=; unset am_filepart;}
  { am_mf=; unset am_mf;}
  { am_rc=; unset am_rc;}
  rm -f conftest-deps.mk
}
 ;;
    "libtool":C)

    # See if we are running on zsh, and set the options that allow our
    # commands through without removal of \ escapes.
    if test -n "${ZSH_VERSION+set}"; then
      setopt NO_GLOB_SUBST
    fi

    cfgfile=${ofile}T
    trap "$RM \"$cfgfile\"; exit 1" 1 2 15
    $RM "$cfgfile"

    cat <<_LT_EOF >> "$cfgfile"
#! $SHELL
# Generated automatically by $as_me ($PACKAGE) $VERSION
# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`:
# NOTE: Changes made to this file will be lost: look at ltmain.sh.

# Provide generalized library-building support services.
# Written by Gordon Matzigkeit, 1996

# Copyright (C) 2014 Free Software Foundation, Inc.
# This is free software; see the source for copying conditions.  There is NO
# warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

# GNU Libtool is free software; you can redistribute it and/or modify
# it under the terms of the GNU General Public License as published by
# the Free Software Foundation; either version 2 of of the License, or
# (at your option) any later version.
#
# As a special exception to the GNU General Public License, if you
# distribute this file as part of a program or library that is built
# using GNU Libtool, you may include this file under the  same
# distribution terms that you use for the rest of that program.
#
# GNU Libtool is distributed in the hope that it will be useful, but
# WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU General Public License for more details.
#
# You should have received a copy of the GNU General Public License
# along with this program.  If not, see <http://www.gnu.org/licenses/>.


# The names of the tagged configurations supported by this script.
available_tags='CXX F77 FC GO GCJ RC '

# Configured defaults for sys_lib_dlsearch_path munging.
: \${LT_SYS_LIBRARY_PATH="$configure_time_lt_sys_library_path"}

# ### BEGIN LIBTOOL CONFIG

# Which release of libtool.m4 was used?
macro_version=$macro_version
macro_revision=$macro_revision

# Assembler program.
AS=$lt_AS

# DLL creation program.
DLLTOOL=$lt_DLLTOOL

# Object dumper program.
OBJDUMP=$lt_OBJDUMP

# Whether or not to build shared libraries.
build_libtool_libs=$enable_shared

# Whether or not to build static libraries.
build_old_libs=$enable_static

# What type of objects to build.
pic_mode=$pic_mode

# Whether or not to optimize for fast installation.
fast_install=$enable_fast_install

# Shared archive member basename,for filename based shared library versioning on AIX.
shared_archive_member_spec=$shared_archive_member_spec

# Shell to use when invoking shell scripts.
SHELL=$lt_SHELL

# An echo program that protects backslashes.
ECHO=$lt_ECHO

# The PATH separator for the build system.
PATH_SEPARATOR=$lt_PATH_SEPARATOR

# The host system.
host_alias=$host_alias
host=$host
host_os=$host_os

# The build system.
build_alias=$build_alias
build=$build
build_os=$build_os

# A sed program that does not truncate output.
SED=$lt_SED

# Sed that helps us avoid accidentally triggering echo(1) options like -n.
Xsed="\$SED -e 1s/^X//"

# A grep program that handles long lines.
GREP=$lt_GREP

# An ERE matcher.
EGREP=$lt_EGREP

# A literal string matcher.
FGREP=$lt_FGREP

# A BSD- or MS-compatible name lister.
NM=$lt_NM

# Whether we need soft or hard links.
LN_S=$lt_LN_S

# What is the maximum length of a command?
max_cmd_len=$max_cmd_len

# Object file suffix (normally "o").
objext=$ac_objext

# Executable file suffix (normally "").
exeext=$exeext

# whether the shell understands "unset".
lt_unset=$lt_unset

# turn spaces into newlines.
SP2NL=$lt_lt_SP2NL

# turn newlines into spaces.
NL2SP=$lt_lt_NL2SP

# convert \$build file names to \$host format.
to_host_file_cmd=$lt_cv_to_host_file_cmd

# convert \$build files to toolchain format.
to_tool_file_cmd=$lt_cv_to_tool_file_cmd

# A file(cmd) program that detects file types.
FILECMD=$lt_FILECMD

# Method to check whether dependent libraries are shared objects.
deplibs_check_method=$lt_deplibs_check_method

# Command to use when deplibs_check_method = "file_magic".
file_magic_cmd=$lt_file_magic_cmd

# How to find potential files when deplibs_check_method = "file_magic".
file_magic_glob=$lt_file_magic_glob

# Find potential files using nocaseglob when deplibs_check_method = "file_magic".
want_nocaseglob=$lt_want_nocaseglob

# Command to associate shared and link libraries.
sharedlib_from_linklib_cmd=$lt_sharedlib_from_linklib_cmd

# The archiver.
AR=$lt_AR

# Flags to create an archive (by configure).
lt_ar_flags=$lt_ar_flags

# Flags to create an archive.
AR_FLAGS=\${ARFLAGS-"\$lt_ar_flags"}

# How to feed a file listing to the archiver.
archiver_list_spec=$lt_archiver_list_spec

# A symbol stripping program.
STRIP=$lt_STRIP

# Commands used to install an old-style archive.
RANLIB=$lt_RANLIB
old_postinstall_cmds=$lt_old_postinstall_cmds
old_postuninstall_cmds=$lt_old_postuninstall_cmds

# Whether to use a lock for old archive extraction.
lock_old_archive_extraction=$lock_old_archive_extraction

# A C compiler.
LTCC=$lt_CC

# LTCC compiler flags.
LTCFLAGS=$lt_CFLAGS

# Take the output of nm and produce a listing of raw symbols and C names.
global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe

# Transform the output of nm in a proper C declaration.
global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl

# Transform the output of nm into a list of symbols to manually relocate.
global_symbol_to_import=$lt_lt_cv_sys_global_symbol_to_import

# Transform the output of nm in a C name address pair.
global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address

# Transform the output of nm in a C name address pair when lib prefix is needed.
global_symbol_to_c_name_address_lib_prefix=$lt_lt_cv_sys_global_symbol_to_c_name_address_lib_prefix

# The name lister interface.
nm_interface=$lt_lt_cv_nm_interface

# Specify filename containing input files for \$NM.
nm_file_list_spec=$lt_nm_file_list_spec

# The root where to search for dependent libraries,and where our libraries should be installed.
lt_sysroot=$lt_sysroot

# Command to truncate a binary pipe.
lt_truncate_bin=$lt_lt_cv_truncate_bin

# The name of the directory that contains temporary libtool files.
objdir=$objdir

# Used to examine libraries when file_magic_cmd begins with "file".
MAGIC_CMD=$MAGIC_CMD

# Must we lock files when doing compilation?
need_locks=$lt_need_locks

# Manifest tool.
MANIFEST_TOOL=$lt_MANIFEST_TOOL

# Tool to manipulate archived DWARF debug symbol files on Mac OS X.
DSYMUTIL=$lt_DSYMUTIL

# Tool to change global to local symbols on Mac OS X.
NMEDIT=$lt_NMEDIT

# Tool to manipulate fat objects and archives on Mac OS X.
LIPO=$lt_LIPO

# ldd/readelf like tool for Mach-O binaries on Mac OS X.
OTOOL=$lt_OTOOL

# ldd/readelf like tool for 64 bit Mach-O binaries on Mac OS X 10.4.
OTOOL64=$lt_OTOOL64

# Old archive suffix (normally "a").
libext=$libext

# Shared library suffix (normally ".so").
shrext_cmds=$lt_shrext_cmds

# The commands to extract the exported symbol list from a shared archive.
extract_expsyms_cmds=$lt_extract_expsyms_cmds

# Variables whose values should be saved in libtool wrapper scripts and
# restored at link time.
variables_saved_for_relink=$lt_variables_saved_for_relink

# Do we need the "lib" prefix for modules?
need_lib_prefix=$need_lib_prefix

# Do we need a version for libraries?
need_version=$need_version

# Library versioning type.
version_type=$version_type

# Shared library runtime path variable.
runpath_var=$runpath_var

# Shared library path variable.
shlibpath_var=$shlibpath_var

# Is shlibpath searched before the hard-coded library search path?
shlibpath_overrides_runpath=$shlibpath_overrides_runpath

# Format of library name prefix.
libname_spec=$lt_libname_spec

# List of archive names.  First name is the real one, the rest are links.
# The last name is the one that the linker finds with -lNAME
library_names_spec=$lt_library_names_spec

# The coded name of the library, if different from the real name.
soname_spec=$lt_soname_spec

# Permission mode override for installation of shared libraries.
install_override_mode=$lt_install_override_mode

# Command to use after installation of a shared archive.
postinstall_cmds=$lt_postinstall_cmds

# Command to use after uninstallation of a shared archive.
postuninstall_cmds=$lt_postuninstall_cmds

# Commands used to finish a libtool library installation in a directory.
finish_cmds=$lt_finish_cmds

# As "finish_cmds", except a single script fragment to be evaled but
# not shown.
finish_eval=$lt_finish_eval

# Whether we should hardcode library paths into libraries.
hardcode_into_libs=$hardcode_into_libs

# Compile-time system search path for libraries.
sys_lib_search_path_spec=$lt_sys_lib_search_path_spec

# Detected run-time system search path for libraries.
sys_lib_dlsearch_path_spec=$lt_configure_time_dlsearch_path

# Explicit LT_SYS_LIBRARY_PATH set during ./configure time.
configure_time_lt_sys_library_path=$lt_configure_time_lt_sys_library_path

# Whether dlopen is supported.
dlopen_support=$enable_dlopen

# Whether dlopen of programs is supported.
dlopen_self=$enable_dlopen_self

# Whether dlopen of statically linked programs is supported.
dlopen_self_static=$enable_dlopen_self_static

# Commands to strip libraries.
old_striplib=$lt_old_striplib
striplib=$lt_striplib


# The linker used to build libraries.
LD=$lt_LD

# How to create reloadable object files.
reload_flag=$lt_reload_flag
reload_cmds=$lt_reload_cmds

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds

# A language specific compiler.
CC=$lt_compiler

# Is the compiler the GNU compiler?
with_gcc=$GCC

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds
archive_expsym_cmds=$lt_archive_expsym_cmds

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds
module_expsym_cmds=$lt_module_expsym_cmds

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds

# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects
postdep_objects=$lt_postdep_objects
predeps=$lt_predeps
postdeps=$lt_postdeps

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path

# ### END LIBTOOL CONFIG

_LT_EOF

    cat <<'_LT_EOF' >> "$cfgfile"

# ### BEGIN FUNCTIONS SHARED WITH CONFIGURE

# func_munge_path_list VARIABLE PATH
# -----------------------------------
# VARIABLE is name of variable containing _space_ separated list of
# directories to be munged by the contents of PATH, which is string
# having a format:
# "DIR[:DIR]:"
#       string "DIR[ DIR]" will be prepended to VARIABLE
# ":DIR[:DIR]"
#       string "DIR[ DIR]" will be appended to VARIABLE
# "DIRP[:DIRP]::[DIRA:]DIRA"
#       string "DIRP[ DIRP]" will be prepended to VARIABLE and string
#       "DIRA[ DIRA]" will be appended to VARIABLE
# "DIR[:DIR]"
#       VARIABLE will be replaced by "DIR[ DIR]"
func_munge_path_list ()
{
    case x$2 in
    x)
        ;;
    *:)
        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'` \$$1\"
        ;;
    x:*)
        eval $1=\"\$$1 `$ECHO $2 | $SED 's/:/ /g'`\"
        ;;
    *::*)
        eval $1=\"\$$1\ `$ECHO $2 | $SED -e 's/.*:://' -e 's/:/ /g'`\"
        eval $1=\"`$ECHO $2 | $SED -e 's/::.*//' -e 's/:/ /g'`\ \$$1\"
        ;;
    *)
        eval $1=\"`$ECHO $2 | $SED 's/:/ /g'`\"
        ;;
    esac
}


# Calculate cc_basename.  Skip known compiler wrappers and cross-prefix.
func_cc_basename ()
{
    for cc_temp in $*""; do
      case $cc_temp in
        compile | *[\\/]compile | ccache | *[\\/]ccache ) ;;
        distcc | *[\\/]distcc | purify | *[\\/]purify ) ;;
        \-*) ;;
        *) break;;
      esac
    done
    func_cc_basename_result=`$ECHO "$cc_temp" | $SED "s%.*/%%; s%^$host_alias-%%"`
}


# ### END FUNCTIONS SHARED WITH CONFIGURE

_LT_EOF

  case $host_os in
  aix3*)
    cat <<\_LT_EOF >> "$cfgfile"
# AIX sometimes has problems with the GCC collect2 program.  For some
# reason, if we set the COLLECT_NAMES environment variable, the problems
# vanish in a puff of smoke.
if test set != "${COLLECT_NAMES+set}"; then
  COLLECT_NAMES=
  export COLLECT_NAMES
fi
_LT_EOF
    ;;
  esac


ltmain=$ac_aux_dir/ltmain.sh


  # We use sed instead of cat because bash on DJGPP gets confused if
  # if finds mixed CR/LF and LF-only lines.  Since sed operates in
  # text mode, it properly converts lines to CR/LF.  This bash problem
  # is reportedly fixed, but why not run on old versions too?
  $SED '$q' "$ltmain" >> "$cfgfile" \
     || (rm -f "$cfgfile"; exit 1)

   mv -f "$cfgfile" "$ofile" ||
    (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile")
  chmod +x "$ofile"


    cat <<_LT_EOF >> "$ofile"

# ### BEGIN LIBTOOL TAG CONFIG: CXX

# The linker used to build libraries.
LD=$lt_LD_CXX

# How to create reloadable object files.
reload_flag=$lt_reload_flag_CXX
reload_cmds=$lt_reload_cmds_CXX

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_CXX

# A language specific compiler.
CC=$lt_compiler_CXX

# Is the compiler the GNU compiler?
with_gcc=$GCC_CXX

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_CXX

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_CXX

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_CXX

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_CXX

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_CXX

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_CXX
archive_expsym_cmds=$lt_archive_expsym_cmds_CXX

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_CXX
module_expsym_cmds=$lt_module_expsym_cmds_CXX

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_CXX

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_CXX

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_CXX

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_CXX

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_CXX

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_CXX

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_CXX

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_CXX

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_CXX

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_CXX

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_CXX

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_CXX

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_CXX

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_CXX

# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds_CXX

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_CXX

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_CXX

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_CXX

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_CXX
postdep_objects=$lt_postdep_objects_CXX
predeps=$lt_predeps_CXX
postdeps=$lt_postdeps_CXX

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_CXX

# ### END LIBTOOL TAG CONFIG: CXX
_LT_EOF


    cat <<_LT_EOF >> "$ofile"

# ### BEGIN LIBTOOL TAG CONFIG: F77

# The linker used to build libraries.
LD=$lt_LD_F77

# How to create reloadable object files.
reload_flag=$lt_reload_flag_F77
reload_cmds=$lt_reload_cmds_F77

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_F77

# A language specific compiler.
CC=$lt_compiler_F77

# Is the compiler the GNU compiler?
with_gcc=$GCC_F77

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_F77

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_F77

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_F77

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_F77

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_F77

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_F77
archive_expsym_cmds=$lt_archive_expsym_cmds_F77

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_F77
module_expsym_cmds=$lt_module_expsym_cmds_F77

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_F77

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_F77

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_F77

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_F77

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_F77

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_F77

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_F77

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_F77

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_F77

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_F77

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_F77

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_F77

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_F77

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_F77

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_F77

# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds_F77

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_F77

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_F77

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_F77

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_F77
postdep_objects=$lt_postdep_objects_F77
predeps=$lt_predeps_F77
postdeps=$lt_postdeps_F77

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_F77

# ### END LIBTOOL TAG CONFIG: F77
_LT_EOF


    cat <<_LT_EOF >> "$ofile"

# ### BEGIN LIBTOOL TAG CONFIG: FC

# The linker used to build libraries.
LD=$lt_LD_FC

# How to create reloadable object files.
reload_flag=$lt_reload_flag_FC
reload_cmds=$lt_reload_cmds_FC

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_FC

# A language specific compiler.
CC=$lt_compiler_FC

# Is the compiler the GNU compiler?
with_gcc=$GCC_FC

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_FC

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_FC

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_FC

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_FC

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_FC

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_FC

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_FC

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_FC

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_FC

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_FC

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_FC

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_FC

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_FC
archive_expsym_cmds=$lt_archive_expsym_cmds_FC

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_FC
module_expsym_cmds=$lt_module_expsym_cmds_FC

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_FC

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_FC

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_FC

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_FC

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_FC

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_FC

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_FC

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_FC

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_FC

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_FC

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_FC

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_FC

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_FC

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_FC

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_FC

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_FC

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_FC

# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds_FC

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_FC

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_FC

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_FC

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_FC
postdep_objects=$lt_postdep_objects_FC
predeps=$lt_predeps_FC
postdeps=$lt_postdeps_FC

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_FC

# ### END LIBTOOL TAG CONFIG: FC
_LT_EOF


    cat <<_LT_EOF >> "$ofile"

# ### BEGIN LIBTOOL TAG CONFIG: GO

# The linker used to build libraries.
LD=$lt_LD_GO

# How to create reloadable object files.
reload_flag=$lt_reload_flag_GO
reload_cmds=$lt_reload_cmds_GO

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_GO

# A language specific compiler.
CC=$lt_compiler_GO

# Is the compiler the GNU compiler?
with_gcc=$GCC_GO

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GO

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_GO

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_GO

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_GO

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GO

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_GO

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GO

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GO

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_GO

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_GO

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GO

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GO

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_GO
archive_expsym_cmds=$lt_archive_expsym_cmds_GO

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_GO
module_expsym_cmds=$lt_module_expsym_cmds_GO

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_GO

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_GO

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_GO

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GO

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_GO

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_GO

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_GO

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_GO

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_GO

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_GO

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_GO

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_GO

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_GO

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_GO

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_GO

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_GO

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_GO

# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds_GO

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_GO

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_GO

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GO

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_GO
postdep_objects=$lt_postdep_objects_GO
predeps=$lt_predeps_GO
postdeps=$lt_postdeps_GO

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_GO

# ### END LIBTOOL TAG CONFIG: GO
_LT_EOF


    cat <<_LT_EOF >> "$ofile"

# ### BEGIN LIBTOOL TAG CONFIG: GCJ

# The linker used to build libraries.
LD=$lt_LD_GCJ

# How to create reloadable object files.
reload_flag=$lt_reload_flag_GCJ
reload_cmds=$lt_reload_cmds_GCJ

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_GCJ

# A language specific compiler.
CC=$lt_compiler_GCJ

# Is the compiler the GNU compiler?
with_gcc=$GCC_GCJ

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_GCJ

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_GCJ

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_GCJ

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_GCJ

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_GCJ

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_GCJ
archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_GCJ
module_expsym_cmds=$lt_module_expsym_cmds_GCJ

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_GCJ

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_GCJ

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_GCJ

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_GCJ

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_GCJ

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_GCJ

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_GCJ

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_GCJ

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_GCJ

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_GCJ

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_GCJ

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_GCJ

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_GCJ

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_GCJ

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_GCJ

# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds_GCJ

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_GCJ

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_GCJ

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_GCJ

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_GCJ
postdep_objects=$lt_postdep_objects_GCJ
predeps=$lt_predeps_GCJ
postdeps=$lt_postdeps_GCJ

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ

# ### END LIBTOOL TAG CONFIG: GCJ
_LT_EOF


    cat <<_LT_EOF >> "$ofile"

# ### BEGIN LIBTOOL TAG CONFIG: RC

# The linker used to build libraries.
LD=$lt_LD_RC

# How to create reloadable object files.
reload_flag=$lt_reload_flag_RC
reload_cmds=$lt_reload_cmds_RC

# Commands used to build an old-style archive.
old_archive_cmds=$lt_old_archive_cmds_RC

# A language specific compiler.
CC=$lt_compiler_RC

# Is the compiler the GNU compiler?
with_gcc=$GCC_RC

# Compiler flag to turn off builtin functions.
no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC

# Additional compiler flags for building library objects.
pic_flag=$lt_lt_prog_compiler_pic_RC

# How to pass a linker flag through the compiler.
wl=$lt_lt_prog_compiler_wl_RC

# Compiler flag to prevent dynamic linking.
link_static_flag=$lt_lt_prog_compiler_static_RC

# Does compiler simultaneously support -c and -o options?
compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC

# Whether or not to add -lc for building shared libraries.
build_libtool_need_lc=$archive_cmds_need_lc_RC

# Whether or not to disallow shared libs when runtime libs are static.
allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC

# Compiler flag to allow reflexive dlopens.
export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC

# Compiler flag to generate shared objects directly from archives.
whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC

# Whether the compiler copes with passing no objects directly.
compiler_needs_object=$lt_compiler_needs_object_RC

# Create an old-style archive from a shared archive.
old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC

# Create a temporary old-style archive to link instead of a shared archive.
old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC

# Commands used to build a shared archive.
archive_cmds=$lt_archive_cmds_RC
archive_expsym_cmds=$lt_archive_expsym_cmds_RC

# Commands used to build a loadable module if different from building
# a shared archive.
module_cmds=$lt_module_cmds_RC
module_expsym_cmds=$lt_module_expsym_cmds_RC

# Whether we are building with GNU ld or not.
with_gnu_ld=$lt_with_gnu_ld_RC

# Flag that allows shared libraries with undefined symbols to be built.
allow_undefined_flag=$lt_allow_undefined_flag_RC

# Flag that enforces no undefined symbols.
no_undefined_flag=$lt_no_undefined_flag_RC

# Flag to hardcode \$libdir into a binary during linking.
# This must work even if \$libdir does not exist
hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC

# Whether we need a single "-rpath" flag with a separated argument.
hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary.
hardcode_direct=$hardcode_direct_RC

# Set to "yes" if using DIR/libNAME\$shared_ext during linking hardcodes
# DIR into the resulting binary and the resulting library dependency is
# "absolute",i.e impossible to change by setting \$shlibpath_var if the
# library is relocated.
hardcode_direct_absolute=$hardcode_direct_absolute_RC

# Set to "yes" if using the -LDIR flag during linking hardcodes DIR
# into the resulting binary.
hardcode_minus_L=$hardcode_minus_L_RC

# Set to "yes" if using SHLIBPATH_VAR=DIR during linking hardcodes DIR
# into the resulting binary.
hardcode_shlibpath_var=$hardcode_shlibpath_var_RC

# Set to "yes" if building a shared library automatically hardcodes DIR
# into the library and all subsequent libraries and executables linked
# against it.
hardcode_automatic=$hardcode_automatic_RC

# Set to yes if linker adds runtime paths of dependent libraries
# to runtime path list.
inherit_rpath=$inherit_rpath_RC

# Whether libtool must link a program against all its dependency libraries.
link_all_deplibs=$link_all_deplibs_RC

# Set to "yes" if exported symbols are required.
always_export_symbols=$always_export_symbols_RC

# The commands to list exported symbols.
export_symbols_cmds=$lt_export_symbols_cmds_RC

# Symbols that should not be listed in the preloaded symbols.
exclude_expsyms=$lt_exclude_expsyms_RC

# Symbols that must always be exported.
include_expsyms=$lt_include_expsyms_RC

# Commands necessary for linking programs (against libraries) with templates.
prelink_cmds=$lt_prelink_cmds_RC

# Commands necessary for finishing linking programs.
postlink_cmds=$lt_postlink_cmds_RC

# Specify filename containing input files.
file_list_spec=$lt_file_list_spec_RC

# How to hardcode a shared library path into an executable.
hardcode_action=$hardcode_action_RC

# The directories searched by this compiler when creating a shared library.
compiler_lib_search_dirs=$lt_compiler_lib_search_dirs_RC

# Dependencies to place before and after the objects being linked to
# create a shared library.
predep_objects=$lt_predep_objects_RC
postdep_objects=$lt_postdep_objects_RC
predeps=$lt_predeps_RC
postdeps=$lt_postdeps_RC

# The library search path used internally by the compiler when linking
# a shared library.
compiler_lib_search_path=$lt_compiler_lib_search_path_RC

# ### END LIBTOOL TAG CONFIG: RC
_LT_EOF

 ;;

  esac
done # for ac_tag


as_fn_exit 0
_ACEOF
ac_clean_files=$ac_clean_files_save

test $ac_write_fail = 0 ||
  as_fn_error $? "write failure creating $CONFIG_STATUS" "$LINENO" 5


# configure is writing to config.log, and then calls config.status.
# config.status does its own redirection, appending to config.log.
# Unfortunately, on DOS this fails, as config.log is still kept open
# by configure, so config.status won't be able to write to it; its
# output is simply discarded.  So we exec the FD to /dev/null,
# effectively closing config.log, so it can be properly (re)opened and
# appended to by config.status.  When coming back to configure, we
# need to make the FD available again.
if test "$no_create" != yes; then
  ac_cs_success=:
  ac_config_status_args=
  test "$silent" = yes &&
    ac_config_status_args="$ac_config_status_args --quiet"
  exec 5>/dev/null
  $SHELL $CONFIG_STATUS $ac_config_status_args || ac_cs_success=false
  exec 5>>config.log
  # Use ||, not &&, to avoid exiting from the if with $? = 1, which
  # would make configure fail if this is the last instruction.
  $ac_cs_success || as_fn_exit 1
fi
if test -n "$ac_unrecognized_opts" && test "$enable_option_checking" != no; then
  { $as_echo "$as_me:${as_lineno-$LINENO}: WARNING: unrecognized options: $ac_unrecognized_opts" >&5
$as_echo "$as_me: WARNING: unrecognized options: $ac_unrecognized_opts" >&2;}
fi