SLineCmtstateErrorstateDead
A duration must be as "number<unit>", without any spaces. Valid units are:

    ns         nanoseconds (billionth of a second)
    us, µs     microseconds (millionth of a second)
    ms         milliseconds (thousands of a second)
    s          seconds
    m          minutes
    h          hours

You can combine multiple units; for example "5m10s" for 5 minutes and 10
seconds.
  Create, push, pull and manage source images and associated source artifacts.  A source image contains all source artifacts an ordinary OCI image has been built with.  Those artifacts can be any kind of source artifact, such as source RPMs, an entire source tree or text files.

  Note that the buildah-source command and all its subcommands are experimental and may be subject to future changes.
pull base and SBOM scanner images from the registry. Values:
always:  pull base and SBOM scanner images even if the named images are present in store.
missing: pull base and SBOM scanner images if the named images are not present in store.
never:   only use images present in store if available.
newer:   only pull base and SBOM scanner images when newer images exist on the registry than those in the store.TestBlankPkgNameMismatchedPkgNameInvalidPkgUseBadImportPathBrokenImportImportCRenamedUnusedImportInvalidInitCycleDuplicateDeclInvalidDeclCycleInvalidTypeCycleInvalidConstInitInvalidConstValInvalidConstTypeUntypedNilUseWrongAssignCountUnassignableOperandNoNewVarMultiValAssignOpInvalidIfaceAssignInvalidChanAssignIncompatibleAssignUnaddressableFieldAssignNotATypeInvalidArrayLenBlankIfaceMethodIncomparableMapKey
A TOML datetime must be in one of the following formats:

    2006-01-02T15:04:05Z07:00   Date and time, with timezone.
    2006-01-02T15:04:05         Date and time, but without timezone.
    2006-01-02                  Date without a time or timezone.
    15:04:05                    Just a time, without any timezone.

Seconds may optionally have a fraction, up to nanosecond precision:

    15:04:05.123
    15:04:05.856018510

This number is outside of the "safe" range for floating point numbers; whole
(non-fractional) numbers outside the below range can not always be represented
accurately in a float, leading to some loss of accuracy.

Explicitly mark a number as a fractional unit by adding ".0", which will incur
some loss of accuracy; for example:

	f = 2_000_000_000.0

Accuracy ranges:

	float32 =            16,777,215
	float64 = 9,007,199,254,740,991
buildah manifest create localhost/list
  buildah manifest add localhost/list localhost/image
  buildah manifest annotate --annotation A=B localhost/list localhost/image
  buildah manifest annotate --annotation A=B localhost/list sha256:entryManifestDigest
  buildah manifest inspect localhost/list
  buildah manifest push localhost/list transport:destination
  buildah manifest remove localhost/list sha256:entryManifestDigest
  buildah manifest rm localhost/list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
A '\' inside a "-delimited string is interpreted as an escape character.

The following escape sequences are supported:
\b, \t, \n, \f, \r, \", \\, \uXXXX, and \UXXXXXXXX

To prevent a '\' from being recognized as an escape character, use either:

- a ' or '''-delimited string; escape characters aren't processed in them; or
- write two backslashes to get a single backslash: '\\'.

If you're trying to add a Windows path (e.g. "C:\Users\martin") then using '/'
instead of '\' will usually also work: "C:/Users/martin".
Usage:{{if .Runnable}}
  {{.UseLine}}{{end}}{{if .HasAvailableSubCommands}}
  {{.CommandPath}} [command]{{end}}{{if gt (len .Aliases) 0}}

Aliases:
  {{.NameAndAliases}}{{end}}{{if .HasExample}}

Examples:
  {{.Example}}{{end}}{{if .HasAvailableSubCommands}}

Available Commands:{{range .Commands}}{{if (or .IsAvailableCommand (eq .Name "help"))}}
  {{rpad .Name .NamePadding }} {{.Short}}{{end}}{{end}}{{end}}{{if .HasAvailableLocalFlags}}

Flags:
{{.LocalFlags.FlagUsages | trimTrailingWhitespaces}}{{end}}{{if .HasAvailableInheritedFlags}}
{{end}}
Generate the autocompletion script for the bash shell.

This script depends on the 'bash-completion' package.
If it is not installed already, you can install it via your OS's package manager.

To load completions in your current shell session:

	source <(%[1]s completion bash)

To load completions for every new session, execute once:

#### Linux:

	%[1]s completion bash > /etc/bash_completion.d/%[1]s

#### macOS:

	%[1]s completion bash > $(brew --prefix)/etc/bash_completion.d/%[1]s

You will need to start a new shell for this setup to take effect.
Generate the autocompletion script for the zsh shell.

If shell completion is not already enabled in your environment you will need
to enable it.  You can execute the following once:

	echo "autoload -U compinit; compinit" >> ~/.zshrc

To load completions in your current shell session:

	source <(%[1]s completion zsh)

To load completions for every new session, execute once:

#### Linux:

	%[1]s completion zsh > "${fpath[1]}/_%[1]s"

#### macOS:

	%[1]s completion zsh > $(brew --prefix)/share/zsh/site-functions/_%[1]s

You will need to start a new shell for this setup to take effect.
InvalidIterVarInvalidRangeExprMisplacedBreakMisplacedContinueMisplacedFallthroughDuplicateCaseDuplicateDefaultBadTypeKeywordInvalidTypeSwitchInvalidExprSwitchInvalidSelectCaseUndeclaredLabelDuplicateLabelMisplacedLabelUnusedLabelJumpOverDeclJumpIntoBlockInvalidMethodExprWrongArgCountInvalidCallUnusedResultsInvalidDeferInvalidGoBadDeclRepeatedDeclInvalidUnsafeAddInvalidUnsafeSliceUnsupportedFeatureNotAGenericTypeWrongTypeArgCountCannotInferTypeArgsInvalidTypeArgInvalidInstanceCycleInvalidUnionMisplacedConstraintIfaceInvalidMethodTypeParamsMisplacedTypeParamInvalidUnsafeSliceDataInvalidUnsafeStringInvalidPtrEmbedBadRecvInvalidRecvDuplicateFieldAndMethodDuplicateMethodInvalidBlankInvalidIotaMissingInitBodyInvalidInitSigInvalidInitDeclInvalidMainDeclTooManyValuesNotAnExprTruncatedFloatNumericOverflowUndefinedOpMismatchedTypesDivByZeroNonNumericIncDecUnaddressableOperandInvalidIndirectionNonIndexableOperandInvalidIndexSwappedSliceIndicesNonSliceableOperandInvalidSliceExprInvalidShiftCountInvalidShiftOperandInvalidReceiveInvalidSendDuplicateLitKeyMissingLitKeyInvalidLitIndexOversizeArrayLitMixedStructLitInvalidStructLitMissingLitFieldDuplicateLitFieldUnexportedLitFieldInvalidLitFieldUntypedLitInvalidLitAmbiguousSelectorUndeclaredImportedNameUnexportedNameUndeclaredNameMissingFieldOrMethodBadDotDotDotSyntaxNonVariadicDotDotDot{
    local cur prev words cword split
    declare -A flaghash 2>/dev/null || :
    declare -A aliashash 2>/dev/null || :
    if declare -F _init_completion >/dev/null 2>&1; then
        _init_completion -s || return
    else
        __%[1]s_init_completion -n "=" || return
    fi

    local c=0
    local flag_parsing_disabled=
    local flags=()
    local two_word_flags=()
    local local_nonpersistent_flags=()
    local flags_with_completion=()
    local flags_completion=()
    local commands=("%[1]s")
    local command_aliases=()
    local must_have_one_flag=()
    local must_have_one_noun=()
    local has_completion_function=""
    local last_command=""
    local nouns=()
    local noun_aliases=()

    __%[1]s_handle_word
}


This number is too large; this may be an error in the TOML, but it can also be a
bug in the program that uses too small of an integer.

The maximum and minimum values are:

    size   │ lowest         │ highest
    ───────┼────────────────┼──────────────
    int8   │ -128           │ 127
    int16  │ -32,768        │ 32,767
    int32  │ -2,147,483,648 │ 2,147,483,647
    int64  │ -9.2 × 10¹⁷    │ 9.2 × 10¹⁷
    uint8  │ 0              │ 255
    uint16 │ 0              │ 65,535
    uint32 │ 0              │ 4,294,967,295
    uint64 │ 0              │ 1.8 × 10¹⁸

int refers to int32 on 32-bit systems and int64 on 64-bit systems.
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
!google/protobuf/go_features.proto