/debug/pprof/

[/]. If just the main request is given, the configuration applies to all subrequests.Requests lists the names of requests where the configuration applies. If empty, its applies to all requests. References to subrequests must include the name of the main request and may include the subrequest using the format

[/]. If just the main request is given, the configuration applies to all subrequests.nodePublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodePublishVolume and NodeUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secret references are passed.Distribution of individual GC-related stop-the-world stopping latencies. This is the time it takes from deciding to stop the world until all Ps are stopped. This is a subset of the total GC-related stop-the-world time (/sched/pauses/total/gc:seconds). During this time, some threads may be executing. Bucket counts increase monotonically.Specifies the limit for the number of retries within an index before marking this index as failed. When enabled the number of failures per index is kept in the pod's batch.kubernetes.io/job-index-failure-count annotation. It can only be set when Job's completionMode=Indexed, and the Pod's restart policy is Never. The field is immutable.addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name.An array of string values. If the operator is In or NotIn, the values array must be non-empty. If the operator is Exists or DoesNotExist, the values array must be empty. If the operator is Gt or Lt, the values array must have a single element, which will be interpreted as an integer. This array is replaced during a strategic merge patch.appProtocol represents the application protocol for this port. This field follows standard Kubernetes label syntax. Un-prefixed names are reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). Non-standard protocols should use prefixed names such as mycompany.com/my-custom-protocol.nodeStageSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI NodeStageVolume and NodeStageVolume and NodeUnstageVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.ImagePullSecrets is an optional list of references to secrets in the same namespace to use for pulling any of the images used by this PodSpec. If specified, these secrets will be passed to individual puller implementations for them to use. More info: https://kubernetes.io/docs/concepts/containers/images#specifying-imagepullsecrets-on-a-podIf specified and supported by the platform, this will restrict traffic through the cloud-provider load-balancer will be restricted to the specified client IPs. This field will be ignored if the cloud-provider does not support the feature." More info: https://kubernetes.io/docs/tasks/access-application-cluster/create-external-load-balancer/hostIPs holds the IP addresses allocated to the host. If this field is specified, the first entry must match the hostIP field. This list is empty if the pod has not started yet. A pod can be assigned to a node that has a problem in kubelet which in turns means that HostIPs will not be updated even if there is a node is assigned to this pod.selector is the label query over pods that should match the replicas count. This is same as the label selector but in the string format to avoid introspection by clients. The string will be in the same format as the query-param syntax. More info about label selectors: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/Selector is a label query over pods that should match the replica count. If the selector is empty, it is defaulted to the labels present on the pod template. Label keys and values that must match in order to be controlled by this replica set. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectorsThis pod should be co-located (affinity) or not co-located (anti-affinity) with the pods matching the labelSelector in the specified namespaces, where co-located is defined as running on a node whose value of the label with key topologyKey matches that of any node on which any of the selected pods is running. Empty topologyKey is not allowed.Namespace is the namespace of the action being requested. Currently, there is no distinction between no namespace and all namespaces "" (empty) is defaulted for LocalSubjectAccessReviews "" (empty) is empty for cluster-scoped resources "" (empty) means "all" for namespace scoped resources from a SubjectAccessReview or SelfSubjectAccessReviewIf pool is set, only devices in that pool are selected. Also setting the driver name may be useful to avoid ambiguity when different drivers use the same pool name, but this is not required because selecting pools from different drivers may also be useful, for example when drivers with node-local devices use the node name as their pool name.Request is the name of the request in the claim which caused this device to be allocated. If it references a subrequest in the firstAvailable list on a DeviceRequest, this field must include both the name of the main request and the subrequest using the format

/. Multiple devices may have been allocated per request.controllerPublishSecretRef is a reference to the secret object containing sensitive information to pass to the CSI driver to complete the CSI ControllerPublishVolume and ControllerUnpublishVolume calls. This field is optional, and may be empty if no secret is required. If the secret object contains more than one secret, all secrets are passed.includeObject decides whether to include each object along with its columnar information. Specifying "None" will return no object, specifying "Object" will return the full object contents, and specifying "Metadata" (the default) will return the object's metadata in the PartialObjectMetadata kind in version v1beta1 of the meta.k8s.io API group.List of destination ports for outgoing traffic. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.Set DNS policy for the pod. Defaults to "ClusterFirst". Valid values are 'ClusterFirstWithHostNet', 'ClusterFirst', 'Default' or 'None'. DNS parameters given in DNSConfig will be merged with the policy selected with DNSPolicy. To have DNS options set along with hostNetwork, you have to specify DNS policy explicitly to 'ClusterFirstWithHostNet'.mutations contain operations to perform on matching objects. mutations may not be empty; a minimum of one mutation is required. mutations are evaluated in order, and are reinvoked according to the reinvocationPolicy. The mutations of a policy are invoked for each binding of this policy and reinvocation of mutations occurs on a per binding basis.The UID to run the entrypoint of the container process. Defaults to user specified in image metadata if unspecified. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.serviceName is the name of the service that governs this StatefulSet. This service must exist before the StatefulSet, and is responsible for the network identity of the set. Pods get DNS/hostnames that follow the pattern: pod-specific-string.serviceName.default.svc.cluster.local where "pod-specific-string" is managed by the StatefulSet controller.Distribution of individual non-GC-related stop-the-world stopping latencies. This is the time it takes from deciding to stop the world until all Ps are stopped. This is a subset of the total non-GC-related stop-the-world time (/sched/pauses/total/other:seconds). During this time, some threads may be executing. Bucket counts increase monotonically.ResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.http is a list of http selectors pointing to backends. A path is matched against the path of an incoming request. Currently it can contain characters disallowed from the conventional "path" part of a URL as defined by RFC 3986. Paths must begin with a '/'. A backend defines the referenced service endpoint to which the traffic will be forwarded to.Ready specifies whether the container is currently passing its readiness check. The value will change as readiness probes keep executing. If no readiness probes are specified, this field defaults to true once the container is fully started (see Started field). The value is typically used to determine whether a container is ready to accept traffic.Defines a set of pods (namely those matching the labelSelector relative to the given namespace(s)) that this pod should be co-located (affinity) or not co-located (anti-affinity) with, where co-located is defined as running on a node whose value of the label with key matches that of any node on which a pod of the set of pods is runningpartition is the partition in the volume that you want to mount. If omitted, the default is to mount by volume name. Examples: For volume /dev/sda1, you specify the partition as "1". Similarly, the volume partition for /dev/sda is "0" (or you can leave the property empty). More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdisk`matchingPrecedence` is used to choose among the FlowSchemas that match a given request. The chosen FlowSchema is among those with the numerically lowest (which we take to be logically highest) MatchingPrecedence. Each MatchingPrecedence value must be ranged in [1,10000]. Note that if the precedence is not specified, it will be set to 1000 as default.ports is a list of destination ports for outgoing traffic. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.BinaryData contains the binary data. Each key must consist of alphanumeric characters, '-', '_' or '.'. BinaryData can contain byte sequences that are not in the UTF-8 range. The keys stored in BinaryData must not overlap with the ones in the Data field, this is enforced during validation process. Using this field will require 1.10+ apiserver and kubelet.Adapts a ConfigMap into a projected volume. The contents of the target ConfigMap's Data field will be presented in a projected volume as files using the keys in the Data field as the file names, unless the items element is populated with specific mappings of keys to paths. Note that this is identical to a configmap volume source without the default mode.containerResource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod of the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.containerResource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.List of ephemeral containers run in this pod. Ephemeral containers may be run in an existing pod to perform user-initiated actions such as debugging. This list cannot be specified when creating a pod, and it cannot be modified by updating the pod spec. In order to add an ephemeral container to an existing pod, use the pod's ephemeralcontainers subresource.NodeTaintsPolicy indicates how we will treat node taints when calculating pod topology spread skew. Options are: - Honor: nodes without taints, along with tainted nodes for which the incoming pod has a toleration, are included. - Ignore: node taints are ignored. All nodes are included. If this value is nil, the behavior is equivalent to the Ignore policy.gcePersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Deprecated: GCEPersistentDisk is deprecated. All operations for the in-tree gcePersistentDisk type are redirected to the pd.csi.storage.gke.io CSI driver. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdiskcapacity is the value reported by the CSI driver in its GetCapacityResponse for a GetCapacityRequest with topology and parameters that match the previous fields. The semantic is currently (CSI spec 1.2) defined as: The available capacity, in bytes, of the storage that can be used to provision volumes. If not set, that information is currently unavailable.container resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.container resource refers to a resource metric (such as those specified in requests and limits) known to Kubernetes describing a single container in each pod of the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.Spec defines what can be allocated and how to configure it. This is mutable. Consumers have to be prepared for classes changing at any time, either because they get updated or replaced. Claim allocations are done once based on whatever was set in classes at the time of allocation. Changing the spec automatically increments the metadata.generation number.GC cycle the last time the GC CPU limiter was enabled. This metric is useful for diagnosing the root cause of an out-of-memory error, because the limiter trades memory for CPU time when the GC's CPU time gets too high. This is most likely to occur with use of SetMemoryLimit. The first GC cycle is cycle 1, so a value of 0 indicates that it was never enabled.Distribution of individual GC-related stop-the-world pause latencies. This is the time from deciding to stop the world until the world is started again. Some of this time is spent getting all threads to stop (this is measured directly in /sched/pauses/stopping/gc:seconds), during which some threads may still be running. Bucket counts increase monotonically.SubjectRulesReviewStatus contains the result of a rules check. This check can be incomplete depending on the set of authorizers the server is configured with and any errors experienced during evaluation. Because authorization rules are additive, if a rule appears in a list it's safe to assume the subject has that permission, even if that list is incomplete.EventSeries contain information on series of events, i.e. thing that was/is happening continuously for some time. How often to update the EventSeries is up to the event reporters. The default event reporter in "k8s.io/client-go/tools/events/event_broadcaster.go" shows how this struct is updated on heartbeats and can guide customized reporter implementations.StatusDetails is a set of additional properties that MAY be set by the server to provide additional information about a response. The Reason field of a Status object defines what attributes will be set. Clients must ignore fields that do not match the defined type of each attribute, and should assume that any attribute may be empty, invalid, or under defined.Audiences are the intendend audiences of the token. A recipient of a token must identify themself with an identifier in the list of audiences of the token, and otherwise should reject the token. A token issued for multiple audiences may be used to authenticate against any of the audiences listed but implies a high degree of trust between the target audiences.AllowPrivilegeEscalation controls whether a process can gain more privileges than its parent process. This bool directly controls if the no_new_privs flag will be set on the container process. AllowPrivilegeEscalation is true always when the container is: 1) run as Privileged 2) has CAP_SYS_ADMIN Note that this field cannot be set when spec.os.name is windows.Name is the name of the operating system. The currently supported values are linux and windows. Additional value may be defined in future and can be one of: https://github.com/opencontainers/runtime-spec/blob/master/config.md#platform-specific-configuration Clients should expect to handle additional values and treat unrecognized values in this field as os: nullSpecifies the set of values. Each returned container exit code (might be multiple in case of multiple containers) is checked against this set of values with respect to the operator. The list of values must be ordered and must not contain duplicates. Value '0' cannot be used for the In operator. At least one element is required. At most 255 elements are allowed.awsElasticBlockStore represents an AWS Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Deprecated: AWSElasticBlockStore is deprecated. All operations for the in-tree awsElasticBlockStore type are redirected to the ebs.csi.aws.com CSI driver. More info: https://kubernetes.io/docs/concepts/storage/volumes#awselasticblockstoreThe SELinux context to be applied to the container. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence. Note that this field cannot be set when spec.os.name is windows.The maximum time in seconds for a deployment to make progress before it is considered to be failed. The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status. Note that progress will not be estimated during the time a deployment is paused. Defaults to 600s.Counters defines the counters that will be consumed by the device. The name of each counter must be unique in that set and must be a DNS label. To ensure this uniqueness, capacities defined by the vendor must be listed without the driver name as domain prefix in their name. All others must be listed with their domain prefix. The maximum number of counters is 32.requirements is the parsed interpretation of a field selector. All requirements must be met for a resource instance to match the selector. Webhook implementations should handle requirements, but how to handle them is up to the webhook. Since requirements can only limit the request, it is safe to authorize as unlimited request if the requirements are not understood.requirements is the parsed interpretation of a label selector. All requirements must be met for a resource instance to match the selector. Webhook implementations should handle requirements, but how to handle them is up to the webhook. Since requirements can only limit the request, it is safe to authorize as unlimited request if the requirements are not understood.If specified, indicates the pod's priority. "system-node-critical" and "system-cluster-critical" are two special keywords which indicate the highest priorities with the former being the highest priority. Any other name must be defined by creating a PriorityClass object with that name. If not specified, the pod priority will be default or zero if there is no default.Strategy is the strategy that coordinated leader election will use for picking the leader. If multiple candidates for the same Lease return different strategies, the strategy provided by the candidate with the latest BinaryVersion will be used. If there is still conflict, this is a user error and coordinated leader election will not operate the Lease until resolved.Represents time when the job was completed. It is not guaranteed to be set in happens-before order across separate operations. It is represented in RFC3339 form and is in UTC. The completion time is set when the job finishes successfully, and only then. The value cannot be updated or removed. The value indicates the same or later point in time as the startTime field.This field is a combination of all the claim and class configuration parameters. Drivers can distinguish between those based on a flag. This includes configuration parameters for drivers which have no allocated devices in the result because it is up to the drivers which configuration parameters they support. They can silently ignore unknown configuration parameters.resources represents the minimum resources the volume should have. If RecoverVolumeExpansionFailure feature is enabled users are allowed to specify resource requirements that are lower than previous value but must still be higher than capacity recorded in the status field of the claim. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#resourcesEstimated total CPU time spent performing GC tasks on spare CPU resources that the Go scheduler could not otherwise find a use for. This should be subtracted from the total GC CPU time to obtain a measure of compulsory GC CPU time. This metric is an overestimate, and not directly comparable to system CPU time measurements. Compare only with other /cpu/classes metrics.IngressClass represents the class of the Ingress, referenced by the Ingress Spec. The `ingressclass.kubernetes.io/is-default-class` annotation can be used to indicate that an IngressClass should be considered default. When a single IngressClass resource has this annotation set to true, new Ingress resources without a class specified will be assigned this default class.ready indicates that this endpoint is ready to receive traffic, according to whatever system is managing the endpoint. A nil value should be interpreted as "true". In general, an endpoint should be marked ready if it is serving and not terminating, though this can be overridden in some cases, such as when the associated Service has set the publishNotReadyAddresses flag.Name must be unique within a namespace. Is required when creating resources, although some resources may allow a client to request the generation of an appropriate name automatically. Name is primarily intended for creation idempotence and configuration definition. Cannot be updated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/names#namesports specifies the list of network ports exposed by each endpoint in this slice. Each port must have a unique name. Each slice may include a maximum of 100 ports. Services always have at least 1 port, so EndpointSlices generated by the EndpointSlice controller will likewise always have at least 1 port. EndpointSlices used for other purposes may have an empty ports list.Represents a volume that is populated with the contents of a git repository. Git repo volumes do not support ownership management. Git repo volumes support SELinux relabeling. DEPRECATED: GitRepo is deprecated. To provision a container with a git repo, mount an EmptyDir into an InitContainer that clones the repo using git, then mount the EmptyDir into the Pod's container.Defines how supplemental groups of the first container processes are calculated. Valid values are "Merge" and "Strict". If not specified, "Merge" is used. (Alpha) Using the field requires the SupplementalGroupsPolicy feature gate to be enabled and the container runtime must implement support for this feature. Note that this field cannot be set when spec.os.name is windows.allowWatchBookmarks requests watch events with type "BOOKMARK". Servers that do not implement bookmarks may ignore this flag and bookmarks are sent at the server's discretion. Clients should not assume bookmarks are returned at any specific interval, nor may they assume the server will send any BOOKMARK event during a session. If this is not a watch, this field is ignored.Estimated total available CPU time for user Go code or the Go runtime, as defined by GOMAXPROCS. In other words, GOMAXPROCS integrated over the wall-clock duration this process has been executing for. This metric is an overestimate, and not directly comparable to system CPU time measurements. Compare only with other /cpu/classes metrics. Sum of all metrics in /cpu/classes.name is the name of the resource being referenced. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset. A single parameter used for all admission requests can be configured by setting the `name` field, leaving `selector` blank, and setting namespace if `paramKind` is namespace-scoped.successPolicy specifies the policy when the Job can be declared as succeeded. If empty, the default behavior applies - the Job is declared as succeeded only when the number of succeeded pods equals to the completions. When the field is specified, it must be immutable and works only for the Indexed Jobs. Once the Job meets the SuccessPolicy, the lingering pods are terminated.requiresRepublish indicates the CSI driver wants `NodePublishVolume` being periodically called to reflect any possible change in the mounted volume. This field defaults to false. Note: After a successful initial NodePublishVolume call, subsequent calls to NodePublishVolume should only update the contents of the volume. New mount points will not be seen by a running container.List of ports which should be made accessible on the pods selected for this rule. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.ContainerResourceMetricStatus indicates the current value of a resource metric known to Kubernetes, as specified in requests and limits, describing a single container in each pod in the current scale target (e.g. CPU or memory). Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source.`nonResourceURLs` is a set of url prefixes that a user should have access to and may not be empty. For example: - "/healthz" is legal - "/hea*" is illegal - "/hea" is legal but matches nothing - "/hea/*" also matches nothing - "/healthz/*" matches all per-component health checks. "*" matches all non-resource urls. if it is present, it must be the only entry. Required.Namespace is the namespace of resource being referenced Note that when a namespace is specified, a gateway.networking.k8s.io/ReferenceGrant object is required in the referent namespace to allow that namespace's owner to accept the reference. See the ReferenceGrant documentation for details. (Alpha) This field requires the CrossNamespaceVolumeDataSource feature gate to be enabled.count indicates the maximum number of unique volumes managed by the CSI driver that can be used on a node. A volume that is both attached and mounted on a node is considered to be used once, not twice. The same rule applies for a unique volume that is shared among multiple pods on the same node. If this field is nil, then the supported number of volumes on this node is unbounded.gcePersistentDisk represents a GCE Disk resource that is attached to a kubelet's host machine and then exposed to the pod. Provisioned by an admin. Deprecated: GCEPersistentDisk is deprecated. All operations for the in-tree gcePersistentDisk type are redirected to the pd.csi.storage.gke.io CSI driver. More info: https://kubernetes.io/docs/concepts/storage/volumes#gcepersistentdiskThe SELinux context to be applied to all containers. If unspecified, the container runtime will allocate a random SELinux context for each container. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence for that container. Note that this field cannot be set when spec.os.name is windows.This is a label selector which selects Pods. This field follows standard label selector semantics; if present but empty, it selects all pods. If NamespaceSelector is also set, then the NetworkPolicyPeer as a whole selects the Pods matching PodSelector in the Namespaces selected by NamespaceSelector. Otherwise it selects the Pods matching PodSelector in the policy's own Namespace.Selects Namespaces using cluster-scoped labels. This field follows standard label selector semantics; if present but empty, it selects all namespaces. If PodSelector is also set, then the NetworkPolicyPeer as a whole selects the Pods matching PodSelector in the Namespaces selected by NamespaceSelector. Otherwise it selects all Pods in the Namespaces selected by NamespaceSelector.Route service traffic to pods with label keys and values matching this selector. If empty or not present, the service is assumed to have an external process managing its endpoints, which Kubernetes will not modify. Only applies to types ClusterIP, NodePort, and LoadBalancer. Ignored if type is ExternalName. More info: https://kubernetes.io/docs/concepts/services-networking/service/MatchConstraints specifies what resources this policy is designed to validate. The AdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API ValidatingAdmissionPolicy cannot match ValidatingAdmissionPolicy and ValidatingAdmissionPolicyBinding. Required.Specifies the maximum desired number of pods the job should run at any given time. The actual number of pods running in steady state will be less than this number when ((.spec.completions - .status.successful) < .spec.parallelism), i.e. when the work left to do is less than max parallelism. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/ConsumesCounters defines a list of references to sharedCounters and the set of counters that the device will consume from those counter sets. There can only be a single entry per counterSet. The total number of device counter consumption entries must be <= 32. In addition, the total number in the entire ResourceSlice must be <= 1024 (for example, 64 devices with 16 counters each).An object that describes the pod that will be created. The DaemonSet will create exactly one copy of this pod on every node that matches the template's node selector (or on every node if no node selector is specified). The only allowed template.spec.restartPolicy value is "Always". More info: https://kubernetes.io/docs/concepts/workloads/controllers/replicationcontroller#pod-templateDeviceSubRequest describes a request for device provided in the claim.spec.devices.requests[].firstAvailable array. Each is typically a request for a single resource like a device, but can also ask for several identical devices. DeviceSubRequest is similar to ExactDeviceRequest, but doesn't expose the AdminAccess field as that one is only supported when requesting a specific device.TrafficDistribution offers a way to express preferences for how traffic is distributed to Service endpoints. Implementations can use this field as a hint, but are not required to guarantee strict adherence. If the field is not set, the implementation will apply its default routing strategy. If set to "PreferClose", implementations should prioritize endpoints that are in the same zone.NodeAffinityPolicy indicates how we will treat Pod's nodeAffinity/nodeSelector when calculating pod topology spread skew. Options are: - Honor: only nodes matching nodeAffinity/nodeSelector are included in the calculations. - Ignore: nodeAffinity/nodeSelector are ignored. All nodes are included in the calculations. If this value is nil, the behavior is equivalent to the Honor policy.String that identifies the server's internal version of this object that can be used by clients to determine when objects have changed. Value must be treated as opaque by clients and passed unmodified back to the server. Populated by the system. Read-only. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistencyfieldManager is a name associated with the actor or entity that is making these changes. The value must be less than or 128 characters long, and only contain printable characters, as defined by https://golang.org/pkg/unicode/#IsPrint. This field is required for apply requests (application/apply-patch) but optional for non-apply patch types (JsonPatch, MergePatch, StrategicMergePatch).List of sources which should be able to access the pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all sources (traffic not restricted by source). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the from list.globalDefault specifies whether this PriorityClass should be considered as the default priority for pods that do not have any priority class. Only one PriorityClass can be marked as `globalDefault`. However, if more than one PriorityClasses exists with their `globalDefault` field set to true, the smallest value of such global default PriorityClasses will be used as the default priority.persistentVolumeClaimRetentionPolicy describes the lifecycle of persistent volume claims created from volumeClaimTemplates. By default, all persistent volume claims are created as needed and retained until manually deleted. This policy allows the lifecycle to be altered, for example by deleting persistent volume claims when their stateful set is deleted, or when their pod is scaled down.List of destinations for outgoing traffic of pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all destinations (traffic not restricted by destination). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the to list.ports is a list of ports which should be made accessible on the pods selected for this rule. Each item in this list is combined using a logical OR. If this field is empty or missing, this rule matches all ports (traffic not restricted by port). If this field is present and contains at least one item, then this rule allows traffic only if the traffic matches at least one port in the list.podSelector is a label selector which selects pods. This field follows standard label selector semantics; if present but empty, it selects all pods. If namespaceSelector is also set, then the NetworkPolicyPeer as a whole selects the pods matching podSelector in the Namespaces selected by NamespaceSelector. Otherwise it selects the pods matching podSelector in the policy's own namespace.ImagePullSecrets is a list of references to secrets in the same namespace to use for pulling any images in pods that reference this ServiceAccount. ImagePullSecrets are distinct from Secrets because Secrets can be mounted in the pod, but ImagePullSecrets are only accessed by the kubelet. More info: https://kubernetes.io/docs/concepts/containers/images/#specifying-imagepullsecrets-on-a-podList of sources to populate environment variables in the container. The keys defined within a source must be a C_IDENTIFIER. All invalid keys will be reported as an event when the container is starting. When a key exists in multiple sources, the value associated with the last source will take precedence. Values defined by an Env with a duplicate key will take precedence. Cannot be updated.count indicates the maximum number of unique volumes managed by the CSI driver that can be used on a node. A volume that is both attached and mounted on a node is considered to be used once, not twice. The same rule applies for a unique volume that is shared among multiple pods on the same node. If this field is not specified, then the supported number of volumes on this node is unbounded.Selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.Event is a report of an event somewhere in the cluster. Events have a limited retention time and triggers and messages may evolve with time. Event consumers should not rely on the timing of an event with a given Reason reflecting a consistent underlying trigger, or the continued existence of events with that Reason. Events should be treated as informative, best-effort, supplemental data.progressDeadlineSeconds is the maximum time in seconds for a deployment to make progress before it is considered to be failed. The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status. Note that progress will not be estimated during the time a deployment is paused. Defaults to 600s.deprecatedTopology contains topology information part of the v1beta1 API. This field is deprecated, and will be removed when the v1beta1 API is removed (no sooner than kubernetes v1.24). While this field can hold values, it is not writable through the v1 API, and any attempts to write to it will be silently ignored. Topology information can be found in the zone and nodeName fields instead.controller refers to the name of the controller that should handle this class. This allows for different "flavors" that are controlled by the same controller. For example, you may have different parameters for the same implementing controller. This should be specified as a domain-prefixed path no more than 250 characters in length, e.g. "acme.io/ingress-controller". This field is immutable.Command is the command line to execute inside the container, the working directory for the command is root ('/') in the container's filesystem. The command is simply exec'd, it is not run inside a shell, so traditional shell instructions ('|', etc) won't work. To use a shell, you need to explicitly call out to that shell. Exit status of 0 is treated as live/healthy and non-zero is unhealthy.scope specifies the scope of this rule. Valid values are "Cluster", "Namespaced", and "*" "Cluster" means that only cluster-scoped resources will match this rule. Namespace API objects are cluster-scoped. "Namespaced" means that only namespaced resources will match this rule. "*" means that there are no scope restrictions. Subresources match the scope of their parent resource. Default is "*".Ingress is a collection of rules that allow inbound connections to reach the endpoints defined by a backend. An Ingress can be configured to give services externally-reachable urls, load balance traffic, terminate SSL, offer name based virtual hosting etc. DEPRECATED - This group version of Ingress is deprecated by networking.k8s.io/v1beta1 Ingress. See the release notes for more information.NonResourceURLs is a set of partial urls that a user should have access to. *s are allowed, but only as the full, final step in the path Since non-resource URLs are not namespaced, this field is only applicable for ClusterRoles referenced from a ClusterRoleBinding. Rules can either apply to API resources (such as "pods" or "secrets") or non-resource URL paths (such as "/api"), but not both.Selector is a label query over pods that should match the Replicas count. If Selector is empty, it is defaulted to the labels present on the Pod template. Label keys and values that must match in order to be controlled by this replication controller, if empty defaulted to labels on Pod template. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectorsexpirationSeconds is the requested duration of validity of the service account token. As the token approaches expiration, the kubelet volume plugin will proactively rotate the service account token. The kubelet will start trying to rotate the token if the token is older than 80 percent of its time to live or if the token is older than 24 hours.Defaults to 1 hour and must be at least 10 minutes.selector can be used to match multiple param objects based on their labels. Supply selector: {} to match all resources of the ParamKind. If multiple params are found, they are all evaluated with the policy expressions and the results are ANDed together. One of `name` or `selector` must be set, but `name` and `selector` are mutually exclusive properties. If one is set, the other must be unset.template is the object that describes the pod that will be created if insufficient replicas are detected. Each pod stamped out by the StatefulSet will fulfill this Template, but have a unique identity from the rest of the StatefulSet. Each pod will be named with the format -. For example, a pod in a StatefulSet named "web" with index number "3" would be named "web-3".to is a list of destinations for outgoing traffic of pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all destinations (traffic not restricted by destination). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the to list.from is a list of sources which should be able to access the pods selected for this rule. Items in this list are combined using a logical OR operation. If this field is empty or missing, this rule matches all sources (traffic not restricted by source). If this field is present and contains at least one item, this rule allows traffic only if the traffic matches at least one item in the from list.`assuredConcurrencyShares` (ACS) configures the execution limit, which is a limit on the number of requests of this priority level that may be executing at a given time. ACS must be a positive number. The server's concurrency limit (SCL) is divided among the concurrency-controlled priority levels in proportion to their assured concurrency shares. This produces the assured concurrency value (ACV) Stack memory allocated by the underlying operating system. In non-cgo programs this metric is currently zero. This may change in the future.In cgo programs this metric includes OS thread stacks allocated directly from the OS. Currently, this only accounts for one stack in c-shared and c-archive build modes, and other sources of stacks from the OS are not measured. This too may change in the future.namespaceSelector selects namespaces using cluster-scoped labels. This field follows standard label selector semantics; if present but empty, it selects all namespaces. If podSelector is also set, then the NetworkPolicyPeer as a whole selects the pods matching podSelector in the namespaces selected by namespaceSelector. Otherwise it selects all pods in the namespaces selected by namespaceSelector.Options is the operation option structure of the operation being performed. e.g. `meta.k8s.io/v1.DeleteOptions` or `meta.k8s.io/v1.CreateOptions`. This may be different than the options the caller provided. e.g. for a patch request the performed Operation might be a CREATE, in which case the Options will a `meta.k8s.io/v1.CreateOptions` even though the caller provided `meta.k8s.io/v1.PatchOptions`.podSelector selects the pods to which this NetworkPolicy object applies. The array of ingress rules is applied to any pods selected by this field. Multiple network policies can select the same set of pods. In this case, the ingress rules for each are combined additively. This field is NOT optional and follows standard label selector semantics. An empty podSelector matches all pods in this namespace.Name can be used to reference this request in a pod.spec.containers[].resources.claims entry and in a constraint of the claim. References using the name in the DeviceRequest will uniquely identify a request when the Exactly field is set. When the FirstAvailable field is set, a reference to the name of the DeviceRequest will match whatever subrequest is chosen by the scheduler. Must be a DNS label.List of ports to expose from the container. Not specifying a port here DOES NOT prevent that port from being exposed. Any port which is listening on the default "0.0.0.0" address inside a container will be accessible from the network. Modifying this array with strategic merge patch may corrupt the data. For more information See https://github.com/kubernetes/kubernetes/issues/108255. Cannot be updated.HPAScalingRules configures the scaling behavior for one direction. These Rules are applied after calculating DesiredReplicas from metrics for the HPA. They can limit the scaling velocity by specifying scaling policies. They can prevent flapping by specifying the stabilization window, so that the number of replicas is not set instantly, instead, the safest value from the stabilization window is chosen.PolicyRulesWithSubjects prescribes a test that applies to a request to an apiserver. The test considers the subject making the request, the verb being requested, and the resource to be acted upon. This PolicyRulesWithSubjects matches a request if and only if both (a) at least one member of subjects matches the request and (b) at least one member of resourceRules or nonResourceRules matches the request.format is an optional OpenAPI type modifier for this column. A format modifies the type and imposes additional rules, like date or time formatting for a string. The 'name' format is applied to the primary identifier column which has type 'string' to assist in clients identifying column is the resource name. See https://github.com/OAI/OpenAPI-Specification/blob/master/versions/2.0.md#data-types for more.stabilizationWindowSeconds is the number of seconds for which past recommendations should be considered while scaling up or scaling down. StabilizationWindowSeconds must be greater than or equal to zero and less than or equal to 3600 (one hour). If not set, use the default values: - For scale up: 0 (i.e. no stabilization is done). - For scale down: 300 (i.e. the stabilization window is 300 seconds long).ManagedFields maps workflow-id and version to the set of fields that are managed by that workflow. This is mostly for internal housekeeping, and users typically shouldn't need to set or understand this field. A workflow can be the user's name, a controller's name, or the name of a specific apply path like "ci-cd". The set of fields is always in the version that the workflow used when modifying the object.Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in SecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.CIDRs defines the IP blocks in CIDR notation (e.g. "192.168.0.0/24" or "2001:db8::/64") from which to assign service cluster IPs. Max of two CIDRs is allowed, one of each IP family. The network address of each CIDR, the address that identifies the subnet of a host, is reserved and will not be allocated. The broadcast address for IPv4 CIDRs is also reserved and will not be allocated. This field is immutable.volumeClaimTemplates is a list of claims that pods are allowed to reference. The StatefulSet controller is responsible for mapping network identities to claims in a way that maintains the identity of a pod. Every claim in this list must have at least one matching (by name) volumeMount in one container in the template. A claim in this list takes precedence over any volumes in the template, with the same name.RenewTime is the time that the LeaseCandidate was last updated. Any time a Lease needs to do leader election, the PingTime field is updated to signal to the LeaseCandidate that they should update the RenewTime. Old LeaseCandidate objects are also garbage collected if it has been hours since the last renew. The PingTime field is updated regularly to prevent garbage collection for still active LeaseCandidates.Optional: mode bits used to set permissions on this file, must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.Optional: Path at which the file to which the container's termination message will be written is mounted into the container's filesystem. Message written is intended to be brief final status, such as an assertion failure message. Will be truncated by the node if greater than 4096 bytes. The total message length across all containers will be limited to 12kb. Defaults to /dev/termination-log. Cannot be updated.CreationTimestamp is a timestamp representing the server time when this object was created. It is not guaranteed to be set in happens-before order across separate operations. Clients may not set this value. It is represented in RFC3339 form and is in UTC. Populated by the system. Read-only. Null for lists. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadataReason represents a machine-readable description of why this validation failed. If this is the first validation in the list to fail, this reason, as well as the corresponding HTTP response code, are used in the HTTP response to the client. The currently supported reasons are: "Unauthorized", "Forbidden", "Invalid", "RequestEntityTooLarge". If not set, StatusReasonInvalid is used in the response to the client.Indicates that the container must run as a non-root user. If true, the Kubelet will validate the image at runtime to ensure that it does not run as UID 0 (root) and fail to start the container if it does. If unset or false, no such validation will be performed. May also be set in PodSecurityContext. If set in both SecurityContext and PodSecurityContext, the value specified in SecurityContext takes precedence.`lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. The value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )The field of the resource that has caused this error, as named by its JSON serialization. May include dot and postfix notation for nested attributes. Arrays are zero-indexed. Fields may appear more than once in an array of causes due to fields having multiple errors. Optional. Examples: "name" - the field "name" on the current resource "items[0].name" - the field "name" on the first array entry in "items"`lendablePercent` prescribes the fraction of the level's NominalCL that can be borrowed by other priority levels. This value of this field must be between 0 and 100, inclusive, and it defaults to 0. The number of seats that other levels can borrow from this level, known as this level's LendableConcurrencyLimit (LendableCL), is defined as follows. LendableCL(i) = round( NominalCL(i) * lendablePercent(i)/100.0 )RuntimeClassName refers to a RuntimeClass object in the node.k8s.io group, which should be used to run this pod. If no RuntimeClass resource matches the named class, the pod will not be run. If unset or empty, the "legacy" RuntimeClass will be used, which is an implicit class with an empty definition that uses the default runtime handler. More info: https://git.k8s.io/enhancements/keps/sig-node/585-runtime-classResourceClaim describes a request for access to resources in the cluster, for use by workloads. For example, if a workload needs an accelerator device with specific properties, this is how that request is expressed. The status stanza tracks whether this claim has been satisfied and what specific resources have been allocated. This is an alpha type and requires enabling the DynamicResourceAllocation feature gate.addresses of this endpoint. The contents of this field are interpreted according to the corresponding EndpointSlice addressType field. Consumers must handle different types of addresses in the context of their own capabilities. This must contain at least one address but no more than 100. These are all assumed to be fungible and clients may choose to only use the first element. Refer to: https://issue.k8s.io/106267AuditAnnotations is an unstructured key value map set by remote admission controller (e.g. error=image-blacklisted). MutatingAdmissionWebhook and ValidatingAdmissionWebhook admission controller will prefix the keys with admission webhook name (e.g. imagepolicy.example.com/error=image-blacklisted). AuditAnnotations will be provided by the admission webhook to add additional context to the audit log for this request.Namespace defines the space within which each name must be unique. An empty namespace is equivalent to the "default" namespace, but "default" is the canonical representation. Not all objects are required to be scoped to a namespace - the value of this field for those objects will be empty. Must be a DNS_LABEL. Cannot be updated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/namespacesDEPRECATED - This group version of StatefulSet is deprecated by apps/v1/StatefulSet. See the release notes for more information. StatefulSet represents a set of pods with consistent identities. Identities are defined as: - Network: A single stable DNS and hostname. - Storage: As many VolumeClaims as requested. The StatefulSet guarantees that a given network identity will always map to the same storage identity.mode is Optional: mode bits used to set permissions on this file. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. If not specified, the volume defaultMode will be used. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.Specifies the policy of handling failed pods. In particular, it allows to specify the set of actions and conditions which need to be satisfied to take the associated action. If empty, the default behaviour applies - the counter of failed pods, represented by the jobs's .status.failed field, is incremented and it is checked against the backoffLimit. This field cannot be used in combination with restartPolicy=OnFailure.Represents time when the job controller started processing a job. When a Job is created in the suspended state, this field is not set until the first time it is resumed. This field is reset every time a Job is resumed from suspension. It is represented in RFC3339 form and is in UTC. Once set, the field can only be removed when the job is suspended. The field cannot be modified while the job is unsuspended or finished.InternalTrafficPolicy describes how nodes distribute service traffic they receive on the ClusterIP. If set to "Local", the proxy will assume that pods only want to talk to endpoints of the service on the same node as the pod, dropping the traffic if there are no local endpoints. The default value, "Cluster", uses the standard behavior of routing to all endpoints evenly (possibly modified by topology and other features).The hash value of the storage version, the version this resource is converted to when written to the data store. Value must be treated as opaque by clients. Only equality comparison on the value is valid. This is an alpha feature and may change or be removed in the future. The field is populated by the apiserver only if the StorageVersionHash feature gate is enabled. This field will remain optional even if it graduates.DEPRECATED - This group version of StatefulSet is deprecated by apps/v1beta2/StatefulSet. See the release notes for more information. StatefulSet represents a set of pods with consistent identities. Identities are defined as: - Network: A single stable DNS and hostname. - Storage: As many VolumeClaims as requested. The StatefulSet guarantees that a given network identity will always map to the same storage identity.`namespaces` is a list of target namespaces that restricts matches. A request that specifies a target namespace matches only if either (a) this list contains that target namespace or (b) this list contains "*". Note that "*" matches any specified namespace but does not match a request that _does not specify_ a namespace (see the `clusterScope` field for that). This list may be empty, but only if `clusterScope` is true.RoleBinding references a role, but does not contain it. It can reference a Role in the same namespace or a ClusterRole in the global namespace. It adds who information via Subjects and namespace information by which namespace it exists in. RoleBindings in a given namespace only have effect in that namespace. Deprecated in v1.17 in favor of rbac.authorization.k8s.io/v1 RoleBinding, and will no longer be served in v1.22.List of unique resources health. Each element in the list contains an unique resource ID and its health. At a minimum, for the lifetime of a Pod, resource ID must uniquely identify the resource allocated to the Pod on the Node. If other Pod on the same Node reports the status with the same resource ID, it must be the same resource they share. See ResourceID type definition for a specific format it has in various use cases.Specifies the desired number of successfully finished pods the job should be run with. Setting to null means that the success of any pod signals the success of all pods, and allows parallelism to have any positive value. Setting to 1 means that parallelism is limited to 1 and the success of that pod signals the success of the job. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/NodeName indicates in which node this pod is scheduled. If empty, this pod is a candidate for scheduling by the scheduler defined in schedulerName. Once this field is set, the kubelet for this node becomes responsible for the lifecycle of this pod. This field should not be used to express a desire for the pod to be scheduled on a specific node. https://kubernetes.io/docs/concepts/scheduling-eviction/assign-pod-node/#nodenameIf set, the name of the container from PodSpec that this ephemeral container targets. The ephemeral container will be run in the namespaces (IPC, PID, etc) of this container. If not set then the ephemeral container uses the namespaces configured in the Pod spec. The container runtime must implement support for this feature. If the runtime does not support namespace targeting then the result of setting this field is undefined.volumeNamespace specifies the scope of the volume within StorageOS. If no namespace is specified then the Pod's namespace will be used. This allows the Kubernetes name scoping to be mirrored within StorageOS for tighter integration. Set VolumeName to any name to override the default behaviour. Set to "default" if you are not using namespaces within StorageOS. Namespaces that do not pre-exist within StorageOS will be created.sizeLimit is the total amount of local storage required for this EmptyDir volume. The size limit is also applicable for memory medium. The maximum usage on memory medium EmptyDir would be the minimum value between the SizeLimit specified here and the sum of memory limits of all containers in a pod. The default is nil which means that the limit is undefined. More info: https://kubernetes.io/docs/concepts/storage/volumes#emptydir^GIR[ ]?0AA|((AB|AL|B|BA|BB|BD|BH|BL|BN|BR|BS|BT|CA|CB|CF|CH|CM|CO|CR|CT|CV|CW|DA|DD|DE|DG|DH|DL|DN|DT|DY|E|EC|EH|EN|EX|FK|FY|G|GL|GY|GU|HA|HD|HG|HP|HR|HS|HU|HX|IG|IM|IP|IV|JE|KA|KT|KW|KY|L|LA|LD|LE|LL|LN|LS|LU|M|ME|MK|ML|N|NE|NG|NN|NP|NR|NW|OL|OX|PA|PE|PH|PL|PO|PR|RG|RH|RM|S|SA|SE|SG|SK|SL|SM|SN|SO|SP|SR|SS|ST|SW|SY|TA|TD|TF|TN|TQ|TR|TS|TW|UB|W|WA|WC|WD|WF|WN|WR|WS|WV|YO|ZE)(\d[\dA-Z]?[ ]?\d[ABD-HJLN-UW-Z]{2}))|BFPO[ ]?\d{1,4}$persistentVolumeReclaimPolicy defines what happens to a persistent volume when released from its claim. Valid options are Retain (default for manually created PersistentVolumes), Delete (default for dynamically provisioned PersistentVolumes), and Recycle (deprecated). Recycle must be supported by the volume plugin underlying this PersistentVolume. More info: https://kubernetes.io/docs/concepts/storage/persistent-volumes#reclaiming`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` RequiredMessage represents the message displayed when validation fails. The message is required if the Expression contains line breaks. The message must not contain line breaks. If unset, the message is "failed rule: {Rule}". e.g. "must be a URL with the host matching spec.host" If the Expression contains line breaks. Message is required. The message must not contain line breaks. If unset, the message is "failed Expression: {Expression}".UID is an identifier for the individual request/response. It allows us to distinguish instances of requests which are otherwise identical (parallel requests, requests when earlier requests did not modify etc) The UID is meant to track the round trip (request/response) between the KAS and the WebHook, not the user request. It is suitable for correlating log entries between the webhook and apiserver, for either auditing or debugging.paramKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If paramKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in MutatingAdmissionPolicyBinding, the params variable will be null.Resources is the total amount of CPU and Memory resources required by all containers in the pod. It supports specifying Requests and Limits for "cpu" and "memory" resource names only. ResourceClaims are not supported. This field enables fine-grained control over resource allocation for the entire pod, allowing resource sharing among containers in a pod. This is an alpha field and requires enabling the PodLevelResources feature gate.ParamKind specifies the kind of resources used to parameterize this policy. If absent, there are no parameters for this policy and the param CEL variable will not be provided to validation expressions. If ParamKind refers to a non-existent kind, this policy definition is mis-configured and the FailurePolicy is applied. If paramKind is specified but paramRef is unset in ValidatingAdmissionPolicyBinding, the params variable will be null.PodFailurePolicyOnExitCodesRequirement describes the requirement for handling a failed pod based on its container exit codes. In particular, it lookups the .state.terminated.exitCode for each app container and init container status, represented by the .status.containerStatuses and .status.initContainerStatuses fields in the Pod status, respectively. Containers completed with success (exit code 0) are excluded from the requirement check.completedIndexes holds the completed indexes when .spec.completionMode = "Indexed" in a text format. The indexes are represented as decimal integers separated by commas. The numbers are listed in increasing order. Three or more consecutive numbers are compressed and represented by the first and last element of the series, separated by a hyphen. For example, if the completed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7".`parameterNotFoundAction` controls the behavior of the binding when the resource exists, and name or selector is valid, but there are no parameters matched by the binding. If the value is set to `Allow`, then no matched parameters will be treated as successful validation by the binding. If set to `Deny`, then no matched parameters will be subject to the `failurePolicy` of the policy. Allowed values are `Allow` or `Deny` Default to `Deny`SideEffects states whether this webhook has side effects. Acceptable values are: Unknown, None, Some, NoneOnDryRun Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some. Defaults to Unknown.Indicate how the termination message should be populated. File will use the contents of terminationMessagePath to populate the container status message on both success and failure. FallbackToLogsOnError will use the last chunk of container log output if the termination message file is empty and the container exited with an error. The log output is limited to 2048 bytes or 80 lines, whichever is smaller. Defaults to File. Cannot be updated.The maximum time in seconds for a deployment to make progress before it is considered to be failed. The deployment controller will continue to process failed deployments and a condition with a ProgressDeadlineExceeded reason will be surfaced in the deployment status. Note that progress will not be estimated during the time a deployment is paused. This is set to the max value of int32 (i.e. 2147483647) by default, which means "no deadline".defaultMode are the mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.DeviceClassName references a specific DeviceClass, which can define additional configuration and selectors to be inherited by this request. A DeviceClassName is required. Administrators may use this to restrict which devices may get requested by only installing classes with selectors for permitted devices. If users are free to request anything without restrictions, then administrators can create an empty DeviceClass for users to reference.name represents the name of this port. All ports in an EndpointSlice must have a unique name. If the EndpointSlice is derived from a Kubernetes service, this corresponds to the Service.ports[].name. Name must either be an empty string or pass DNS_LABEL validation: * must be no more than 63 characters long. * must consist of lower case alphanumeric characters or '-'. * must start and end with an alphanumeric character. Default is empty string.Event is a report of an event somewhere in the cluster. It generally denotes some state change in the system. Events have a limited retention time and triggers and messages may evolve with time. Event consumers should not rely on the timing of an event with a given Reason reflecting a consistent underlying trigger, or the continued existence of events with that Reason. Events should be treated as informative, best-effort, supplemental data.TolerationSeconds represents the period of time the toleration (which must be of effect NoExecute, otherwise this field is ignored) tolerates the taint. By default, it is not set, which means tolerate the taint forever (do not evict). Zero and negative values will be treated as 0 (evict immediately) by the system. If larger than zero, the time when the pod needs to be evicted is calculated as + .start is the number representing the first replica's index. It may be used to number replicas from an alternate index (eg: 1-indexed) over the default 0-indexed names, or to orchestrate progressive movement of replicas from one StatefulSet to another. If set, replica indices will be in the range: [.spec.ordinals.start, .spec.ordinals.start + .spec.replicas). If unset, defaults to 0. Replica indices will be in the range: [0, .spec.replicas).addresses of this endpoint. For EndpointSlices of addressType "IPv4" or "IPv6", the values are IP addresses in canonical form. The syntax and semantics of other addressType values are not defined. This must contain at least one address but no more than 100. EndpointSlices generated by the EndpointSlice controller will always have exactly 1 address. No semantics are defined for additional addresses beyond the first, and kube-proxy does not look at them.Standard object metadata. metadata.Name indicates the name of the CSI driver that this object refers to; it MUST be the same name returned by the CSI GetPluginName() call for that driver. The driver name must be 63 characters or less, beginning and ending with an alphanumeric character ([a-z0-9A-Z]) with dashes (-), dots (.), and alphanumerics between. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadataResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). The values will be averaged together before being compared to the target. Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. Only one "target" type should be set.fsGroupChangePolicy defines behavior of changing ownership and permission of the volume before being exposed inside Pod. This field will only apply to volume types which support fsGroup based ownership(and permissions). It will have no effect on ephemeral volume types such as: secret, configmaps and emptydir. Valid values are "OnRootMismatch" and "Always". If not specified, "Always" is used. Note that this field cannot be set when spec.os.name is windows.Standard object's metadata. The name has no particular meaning. It must be a DNS subdomain (dots allowed, 253 characters). To ensure that there are no conflicts with other CSI drivers on the cluster, the recommendation is to use csisc-, a generated name, or a reverse-domain name which ends with the unique CSI driver name. Objects are namespaced. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadatarules represents the list of alternative rules for the declaring the Jobs as successful before `.status.succeeded >= .spec.completions`. Once any of the rules are met, the "SucceededCriteriaMet" condition is added, and the lingering pods are removed. The terminal state for such a Job has the "Complete" condition. Additionally, these rules are evaluated in order; Once the Job meets one of the rules, other rules are ignored. At most 20 elements are allowed.RuntimeClass defines a class of container runtime supported in the cluster. The RuntimeClass is used to determine which container runtime is used to run all containers in a pod. RuntimeClasses are manually defined by a user or cluster provisioner, and referenced in the PodSpec. The Kubelet is responsible for resolving the RuntimeClassName reference before running the pod. For more details, see https://kubernetes.io/docs/concepts/containers/runtime-class/template is the object that describes the pod that will be created if insufficient replicas are detected. Each pod stamped out by the StatefulSet will fulfill this Template, but have a unique identity from the rest of the StatefulSet. Each pod will be named with the format -. For example, a pod in a StatefulSet named "web" with index number "3" would be named "web-3". The only allowed template.spec.restartPolicy value is "Always".Standard object's metadata. The name has no particular meaning. It must be be a DNS subdomain (dots allowed, 253 characters). To ensure that there are no conflicts with other CSI drivers on the cluster, the recommendation is to use csisc-, a generated name, or a reverse-domain name which ends with the unique CSI driver name. Objects are namespaced. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#metadataEndpointSlice represents a set of service endpoints. Most EndpointSlices are created by the EndpointSlice controller to represent the Pods selected by Service objects. For a given service there may be multiple EndpointSlice objects which must be joined to produce the full set of endpoints; you can find all of the slices for a given service by listing EndpointSlices in the service's namespace whose `kubernetes.io/service-name` label contains the service's name.Health of the resource. can be one of: - Healthy: operates as normal - Unhealthy: reported unhealthy. We consider this a temporary health issue since we do not have a mechanism today to distinguish temporary and permanent issues. - Unknown: The status cannot be determined. For example, Device Plugin got unregistered and hasn't been re-registered since. In future we may want to introduce the PermanentlyUnhealthy Status.List of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default).types: - name: __untyped_atomic_ scalar: untyped list: elementType: namedType: __untyped_atomic_ elementRelationship: atomic map: elementType: namedType: __untyped_atomic_ elementRelationship: atomic - name: __untyped_deduced_ scalar: untyped list: elementType: namedType: __untyped_atomic_ elementRelationship: atomic map: elementType: namedType: __untyped_deduced_ elementRelationship: separable defaultMode is optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.defaultMode is Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in requests and limits, describing each pod in the current scale target (e.g. CPU or memory). The values will be averaged together before being compared to the target. Such metrics are built in to Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. Only one "target" type should be set.AdminAccess indicates that this is a claim for administrative access to the device(s). Claims with AdminAccess are expected to be used for monitoring or other management services for a device. They ignore all ordinary claims to the device with respect to access modes and any resource allocations. This is an alpha field and requires enabling the DRAAdminAccess feature gate. Admin access is disabled if this field is unset or set to false, otherwise it is enabled.Subresource is the name of the subresource used to update that object, or empty string if the object was updated through the main resource. The value of this field is used to distinguish between managers, even if they share the same name. For example, a status update will be distinct from a regular update using the same manager name. Note that the APIVersion field is not related to the Subresource field and it always corresponds to the version of the main resource.If true the pod's hostname will be configured as the pod's FQDN, rather than the leaf name (the default). In Linux containers, this means setting the FQDN in the hostname field of the kernel (the nodename field of struct utsname). In Windows containers, this means setting the registry value of hostname for the registry key HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\Tcpip\Parameters to FQDN. If a pod does not have FQDN, this has no effect. Default to false.Whether and how garbage collection will be performed. Either this field or OrphanDependents may be set, but not both. The default policy is decided by the existing finalizer set in the metadata.finalizers and the resource-specific default policy. Acceptable values are: 'Orphan' - orphan the dependents; 'Background' - allow the garbage collector to delete the dependents in the background; 'Foreground' - a cascading policy that deletes all dependents in the foreground.SideEffects states whether this webhook has side effects. Acceptable values are: None, NoneOnDryRun (webhooks created via v1beta1 may also specify Some or Unknown). Webhooks with side effects MUST implement a reconciliation system, since a request may be rejected by a future step in the admission chain and the side effects therefore need to be undone. Requests with the dryRun attribute will be auto-rejected if they match a webhook with sideEffects == Unknown or Some.RuntimeClass defines a class of container runtime supported in the cluster. The RuntimeClass is used to determine which container runtime is used to run all containers in a pod. RuntimeClasses are (currently) manually defined by a user or cluster provisioner, and referenced in the PodSpec. The Kubelet is responsible for resolving the RuntimeClassName reference before running the pod. For more details, see https://git.k8s.io/enhancements/keps/sig-node/585-runtime-classallocateLoadBalancerNodePorts defines if NodePorts will be automatically allocated for services with type LoadBalancer. Default is "true". It may be set to "false" if the cluster load-balancer does not rely on NodePorts. If the caller requests specific NodePorts (by specifying a value), those requests will be respected, regardless of this field. This field may only be set for services with type LoadBalancer and will be cleared if the type is changed to any other type.EndpointSubset is a group of addresses with a common set of ports. The expanded set of endpoints is the Cartesian product of Addresses x Ports. For example, given: { Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}], Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}] } The resulting set of endpoints can be viewed as: a: [ 10.10.1.1:8675, 10.10.2.2:8675 ], b: [ 10.10.1.1:309, 10.10.2.2:309 ] Deprecated: This API is deprecated in v1.33+.IPMode specifies how the load-balancer IP behaves, and may only be specified when the ip field is specified. Setting this to "VIP" indicates that traffic is delivered to the node with the destination set to the load-balancer's IP and port. Setting this to "Proxy" indicates that traffic is delivered to the node or pod with the destination set to the node's IP and node port or the pod's IP and port. Service implementations may use this information to adjust traffic routing.AdmissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy.ttlSecondsAfterFinished limits the lifetime of a Job that has finished execution (either Complete or Failed). If this field is set, ttlSecondsAfterFinished after the Job finishes, it is eligible to be automatically deleted. When the Job is being deleted, its lifecycle guarantees (e.g. finalizers) will be honored. If this field is unset, the Job won't be automatically deleted. If this field is set to zero, the Job becomes eligible to be deleted immediately after it finishes.The set of all endpoints is the union of all subsets. Addresses are placed into subsets according to the IPs they share. A single address with multiple ports, some of which are ready and some of which are not (because they come from different containers) will result in the address being displayed in different subsets for the different ports. No address will appear in both Addresses and NotReadyAddresses in the same subset. Sets of addresses and ports that comprise a service.metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used). The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods. Ergo, metrics used must decrease as the pod count is increased, and vice-versa. See the individual metric source types for more information about how each type of metric must respond.maximumVolumeSize is the value reported by the CSI driver in its GetCapacityResponse for a GetCapacityRequest with topology and parameters that match the previous fields. This is defined since CSI spec 1.4.0 as the largest size that may be used in a CreateVolumeRequest.capacity_range.required_bytes field to create a volume with the same parameters as those in GetCapacityRequest. The corresponding value in the Kubernetes API is ResourceRequirements.Requests in a volume claim.If the affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.items if unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.items If unspecified, each key-value pair in the Data field of the referenced Secret will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the Secret, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.If true, AND if the owner has the "foregroundDeletion" finalizer, then the owner cannot be deleted from the key-value store until this reference is removed. See https://kubernetes.io/docs/concepts/architecture/garbage-collection/#foreground-deletion for how the garbage collector interacts with this field and enforces the foreground deletion. Defaults to false. To set this field, a user needs "delete" permission of the owner, otherwise 422 (Unprocessable Entity) will be returned.label selector for pods that should match the replicas count. This is a serializated version of both map-based and more expressive set-based selectors. This is done to avoid introspection in the clients. The string will be in the same format as the query-param syntax. If the target type only supports map-based selectors, both this field and map-based selector field are populated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectorsOnly applies to Service Type: LoadBalancer. This feature depends on whether the underlying cloud-provider supports specifying the loadBalancerIP when a load balancer is created. This field will be ignored if the cloud-provider does not support the feature. Deprecated: This field was under-specified and its meaning varies across implementations. Using it is non-portable and it may not support dual-stack. Users are encouraged to use implementation-specific annotations when available.Statuses of containers in this pod. Each container in the pod should have at most one status in this list, and all statuses should be for containers in the pod. However this is not enforced. If a status for a non-existent container is present in the list, or the list has duplicate names, the behavior of various Kubernetes components is not defined and those statuses might be ignored. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-statusitems if unspecified, each key-value pair in the Data field of the referenced ConfigMap will be projected into the volume as a file whose name is the key and content is the value. If specified, the listed keys will be projected into the specified paths, and unlisted keys will not be present. If a key is specified which is not present in the ConfigMap, the volume setup will error unless it is marked optional. Paths must be relative and may not contain the '..' path or start with '..'.Estimated total CPU time spent with the application paused by the GC. Even if only one thread is running during the pause, this is computed as GOMAXPROCS times the pause latency because nothing else can be executing. This is the exact sum of samples in /sched/pauses/total/gc:seconds if each sample is multiplied by GOMAXPROCS at the time it is taken. This metric is an overestimate, and not directly comparable to system CPU time measurements. Compare only with other /cpu/classes metrics.DeviceClassName references a specific DeviceClass, which can define additional configuration and selectors to be inherited by this subrequest. A class is required. Which classes are available depends on the cluster. Administrators may use this to restrict which devices may get requested by only installing classes with selectors for permitted devices. If users are free to request anything without restrictions, then administrators can create an empty DeviceClass for users to reference.Resources is a list of resources this rule applies to. For example: 'pods' means pods. 'pods/log' means the log subresource of pods. '*' means all resources, but not subresources. 'pods/*' means all subresources of pods. '*/scale' means all scale subresources. '*/*' means all resources and their subresources. If wildcard is present, the validation rule will ensure resources do not overlap with each other. Depending on the enclosing object, subresources might not be allowed. Required.If the anti-affinity requirements specified by this field are not met at scheduling time, the pod will not be scheduled onto the node. If the anti-affinity requirements specified by this field cease to be met at some point during pod execution (e.g. due to a pod label update), the system may or may not try to eventually evict the pod from its node. When there are multiple elements, the lists of nodes corresponding to each podAffinityTerm are intersected, i.e. all terms must be satisfied.Started indicates whether the container has finished its postStart lifecycle hook and passed its startup probe. Initialized as false, becomes true after startupProbe is considered successful. Resets to false when the container is restarted, or if kubelet loses state temporarily. In both cases, startup probes will run again. Is always true when no startupProbe is defined and container is running and has passed the postStart lifecycle hook. The null value must be treated the same as false.failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if paramKind refers to a non-existent Kind. A binding is invalid if paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. Allowed values are Ignore or Fail. Defaults to Fail.Required: Image or artifact reference to be used. Behaves in the same way as pod.spec.containers[*].image. Pull secrets will be assembled in the same way as for the container image by looking up node credentials, SA image pull secrets, and pod spec image pull secrets. More info: https://kubernetes.io/docs/concepts/containers/images This field is optional to allow higher level config management to default or override container images in workload controllers like Deployments and StatefulSets.`type` indicates whether this priority level is subject to limitation on request execution. A value of `"Exempt"` means that requests of this priority level are not subject to a limit (and thus are never queued) and do not detract from the capacity made available to other priority levels. A value of `"Limited"` means that (a) requests of this priority level _are_ subject to limits and (b) some of the server's limited capacity is made available exclusively to this priority level. Required.ContainerResourceMetricSource indicates how to scale on a resource metric known to Kubernetes, as specified in the requests and limits, describing a single container in each of the pods of the current scale target(e.g. CPU or memory). The values will be averaged together before being compared to the target. Such metrics are built into Kubernetes, and have special scaling options on top of those available to normal per-pod metrics using the "pods" source. Only one "target" type should be set.List of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8Variable references $(VAR_NAME) are expanded using the previously defined environment variables in the container and any service environment variables. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Defaults to "".Requested signer for the request. It is a qualified name in the form: `scope-hostname.io/name`. If empty, it will be defaulted: 1. If it's a kubelet client certificate, it is assigned "kubernetes.io/kube-apiserver-client-kubelet". 2. If it's a kubelet serving certificate, it is assigned "kubernetes.io/kubelet-serving". 3. Otherwise, it is assigned "kubernetes.io/legacy-unknown". Distribution of trust for signers happens out of band. You can select on this field using `spec.signerName`.AdmissionReviewVersions is an ordered list of preferred `AdmissionReview` versions the Webhook expects. API server will try to use first version in the list which it supports. If none of the versions specified in this list supported by API server, validation will fail for this object. If a persisted webhook configuration specifies allowed versions and does not include any versions known to the API Server, calls to the webhook will fail and be subject to the failure policy. Default to `['v1beta1']`.DeviceSubRequest describes a request for device provided in the claim.spec.devices.requests[].firstAvailable array. Each is typically a request for a single resource like a device, but can also ask for several identical devices. DeviceSubRequest is similar to Request, but doesn't expose the AdminAccess or FirstAvailable fields, as those can only be set on the top-level request. AdminAccess is not supported for requests with a prioritized list, and recursive FirstAvailable fields are not supported.NodeName identifies the node which provides the resources in this pool. A field selector can be used to list only ResourceSlice objects belonging to a certain node. This field can be used to limit access from nodes to ResourceSlices with the same node name. It also indicates to autoscalers that adding new nodes of the same type as some old node might also make new resources available. Exactly one of NodeName, NodeSelector, AllNodes, and PerDeviceNodeSelection must be set. This field is immutable.targetSelector is the label selector for pods that should match the replicas count. This is a serializated version of both map-based and more expressive set-based selectors. This is done to avoid introspection in the clients. The string will be in the same format as the query-param syntax. If the target type only supports map-based selectors, both this field and map-based selector field are populated. More info: https://kubernetes.io/docs/concepts/overview/working-with-objects/labels/#label-selectorsRequests is a list of the one or more requests in this claim which must co-satisfy this constraint. If a request is fulfilled by multiple devices, then all of the devices must satisfy the constraint. If this is not specified, this constraint applies to all requests in this claim. References to subrequests must include the name of the main request and may include the subrequest using the format

[/]. If just the main request is given, the constraint applies to all subrequests.paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in ParamKind of the bound ValidatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the ValidatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.suspend specifies whether the Job controller should create Pods or not. If a Job is created with suspend set to true, no Pods are created by the Job controller. If a Job is suspended after creation (i.e. the flag goes from false to true), the Job controller will delete all active Pods associated with this Job. Users must design their workload to gracefully handle this. Suspending a Job will reset the StartTime field of the Job, effectively resetting the ActiveDeadlineSeconds timer too. Defaults to false.paramRef specifies the parameter resource used to configure the admission control policy. It should point to a resource of the type specified in spec.ParamKind of the bound MutatingAdmissionPolicy. If the policy specifies a ParamKind and the resource referred to by ParamRef does not exist, this binding is considered mis-configured and the FailurePolicy of the MutatingAdmissionPolicy applied. If the policy does not specify a ParamKind then this field is ignored, and the rules are evaluated without a param.egress is a list of egress rules to be applied to the selected pods. Outgoing traffic is allowed if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic matches at least one egress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy limits all outgoing traffic (and serves solely to ensure that the pods it selects are isolated by default). This field is beta-level in 1.8fsGroupPolicy defines if the underlying volume supports changing ownership and permission of the volume before being mounted. Refer to the specific FSGroupPolicy values for additional details. This field is immutable. Defaults to ReadWriteOnceWithFSType, which will examine each volume to determine if Kubernetes should modify ownership and permissions of the volume. With the default policy the defined fsGroup will only be applied if a fstype is defined and the volume's access mode contains ReadWriteOnce.addressType specifies the type of address carried by this EndpointSlice. All addresses in this slice must be the same type. This field is immutable after creation. The following address types are currently supported: * IPv4: Represents an IPv4 Address. * IPv6: Represents an IPv6 Address. * FQDN: Represents a Fully Qualified Domain Name. (Deprecated) The EndpointSlice controller only generates, and kube-proxy only processes, slices of addressType "IPv4" and "IPv6". No semantics are defined for the "FQDN" type.Optional: mode bits to use on created files by default. Must be a Optional: mode bits used to set permissions on created files by default. Must be an octal value between 0000 and 0777 or a decimal value between 0 and 511. YAML accepts both octal and decimal values, JSON requires decimal values for mode bits. Defaults to 0644. Directories within the path are not affected by this setting. This might be in conflict with other options that affect the file mode, like fsGroup, and the result can be other mode bits set.Rules describes what operations on what resources/subresources the webhook cares about. The webhook cares about an operation if it matches _any_ Rule. However, in order to prevent ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks from putting the cluster in a state which cannot be recovered from without completely disabling the plugin, ValidatingAdmissionWebhooks and MutatingAdmissionWebhooks are never called on admission requests for ValidatingWebhookConfiguration and MutatingWebhookConfiguration objects.Variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except MatchConditions because MatchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, Variables must be sorted by the order of first appearance and acyclic.matchConstraints specifies what resources this policy is designed to validate. The MutatingAdmissionPolicy cares about a request if it matches _all_ Constraints. However, in order to prevent clusters from being put into an unstable state that cannot be recovered from via the API MutatingAdmissionPolicy cannot match MutatingAdmissionPolicy and MutatingAdmissionPolicyBinding. The CREATE, UPDATE and CONNECT operations are allowed. The DELETE operation may not be matched. '*' matches CREATE, UPDATE and CONNECT. Required.variables contain definitions of variables that can be used in composition of other expressions. Each variable is defined as a named CEL expression. The variables defined here will be available under `variables` in other expressions of the policy except matchConditions because matchConditions are evaluated before the rest of the policy. The expression of a variable can refer to other variables defined earlier in the list but not those after. Thus, variables must be sorted by the order of first appearance and acyclic.This field contains the requested additional information about each object based on the includeObject policy when requesting the Table. If "None", this field is empty, if "Object" this will be the default serialization of the object for the current API version, and if "Metadata" (the default) will contain the object metadata. Check the returned kind and apiVersion of the object before parsing. The media type of the object will always match the enclosing list - if this as a JSON table, these will be JSON encoded objects.Statuses for any ephemeral containers that have run in this pod. Each ephemeral container in the pod should have at most one status in this list, and all statuses should be for containers in the pod. However this is not enforced. If a status for a non-existent container is present in the list, or the list has duplicate names, the behavior of various Kubernetes components is not defined and those statuses might be ignored. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#pod-and-container-statusNumber or name of the port to access on the pods targeted by the service. Number must be in the range 1 to 65535. Name must be an IANA_SVC_NAME. If this is a string, it will be looked up as a named port in the target Pod's container ports. If this is not specified, the value of the 'port' field is used (an identity map). This field is ignored for services with clusterIP=None, and should be omitted or set equal to the 'port' field. More info: https://kubernetes.io/docs/concepts/services-networking/service/#defining-a-serviceMaxSkew describes the degree to which pods may be unevenly distributed. When `whenUnsatisfiable=DoNotSchedule`, it is the maximum permitted difference between the number of matching pods in the target topology and the global minimum. The global minimum is the minimum number of matching pods in an eligible domain or zero if the number of eligible domains is less than MinDomains. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 2/2/1: In this case, the global minimum is 1. ingress is a list of ingress rules to be applied to the selected pods. Traffic is allowed to a pod if there are no NetworkPolicies selecting the pod (and cluster policy otherwise allows the traffic), OR if the traffic source is the pod's local node, OR if the traffic matches at least one ingress rule across all of the NetworkPolicy objects whose podSelector matches the pod. If this field is empty then this NetworkPolicy does not allow any traffic (and serves solely to ensure that the pods it selects are isolated by default)An EphemeralContainer is a temporary container that you may add to an existing Pod for user-initiated activities such as debugging. Ephemeral containers have no resource or scheduling guarantees, and they will not be restarted when they exit or when a Pod is removed or restarted. The kubelet may evict a Pod if an ephemeral container causes the Pod to exceed its resource allocation. To add an ephemeral container, use the ephemeralcontainers subresource of an existing Pod. Ephemeral containers may not be removed or restarted.Status of resources resize desired for pod's containers. It is empty if no resources resize is pending. Any changes to container resources will automatically set this to "Proposed" Deprecated: Resize status is moved to two pod conditions PodResizePending and PodResizeInProgress. PodResizePending will track states where the spec has been resized, but the Kubelet has not yet allocated the resources. PodResizeInProgress will track in-progress resizes, and should be present whenever allocated resources != acknowledged resources.podManagementPolicy controls how pods are created during initial scale up, when replacing pods on nodes, or when scaling down. The default policy is `OrderedReady`, where pods are created in increasing order (pod-0, then pod-1, etc) and the controller will wait until each pod is ready before continuing. When scaling down, the pods are removed in the opposite order. The alternative policy is `Parallel` which will create pods in parallel to match the desired scale without waiting, and on scale down will delete all pods at once.The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding up. This can not be 0. Defaults to 1. This field is alpha-level and is only honored by servers that enable the MaxUnavailableStatefulSet feature. The field applies to all pods in the range 0 to Replicas-1. That means if there is any unavailable pod in the range 0 to Replicas-1, it will be counted towards MaxUnavailable.StartupProbe indicates that the Pod has successfully initialized. If specified, no other probes are executed until this completes successfully. If this probe fails, the Pod will be restarted, just as if the livenessProbe failed. This can be used to provide different probe parameters at the beginning of a Pod's lifecycle, when it might take a long time to load data or warm a cache, than during steady-state operation. This cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle#container-probesPolicy for pulling OCI objects. Possible values are: Always: the kubelet always attempts to pull the reference. Container creation will fail If the pull fails. Never: the kubelet never pulls the reference and only uses a local image or artifact. Container creation will fail if the reference isn't present. IfNotPresent: the kubelet pulls if the reference isn't already present on disk. Container creation will fail if the reference isn't present and the pull fails. Defaults to Always if :latest tag is specified, or IfNotPresent otherwise.Specifies the maximal number of failed indexes before marking the Job as failed, when backoffLimitPerIndex is set. Once the number of failed indexes exceeds this number the entire Job is marked as Failed and its execution is terminated. When left as null the job continues execution of all of its indexes and is marked with the `Complete` Job condition. It can only be specified when backoffLimitPerIndex is set. It can be null or up to completions. It is required and must be less than or equal to 10^4 when is completions greater than 10^5.MatchAttribute requires that all devices in question have this attribute and that its type and value are the same across those devices. For example, if you specified "dra.example.com/numa" (a hypothetical example!), then only devices in the same NUMA node will be chosen. A device which does not have that attribute will not be chosen. All devices should use a value of the same type for this attribute because that is part of its specification, but if one device doesn't, then it also will not be chosen. Must include the domain qualifier.nodeID of the node from the driver point of view. This field enables Kubernetes to communicate with storage systems that do not share the same nomenclature for nodes. For example, Kubernetes may refer to a given node as "node1", but the storage system may refer to the same node as "nodeA". When Kubernetes issues a command to the storage system to attach a volume to a specific node, it can use this field to refer to the node name using the ID that the storage system will understand, e.g. "nodeA" instead of "node1". This field is required.nodeAllocatableUpdatePeriodSeconds specifies the interval between periodic updates of the CSINode allocatable capacity for this driver. When set, both periodic updates and updates triggered by capacity-related failures are enabled. If not set, no updates occur (neither periodic nor upon detecting capacity-related failures), and the allocatable.count remains static. The minimum allowed value for this field is 10 seconds. This is an alpha feature and requires the MutableCSINodeAllocatableCount feature gate to be enabled. This field is mutable.maxUnavailable is the maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding up. This can not be 0. Defaults to 1. This field is alpha-level and is only honored by servers that enable the MaxUnavailableStatefulSet feature. The field applies to all pods in the range 0 to Replicas-1. That means if there is any unavailable pod in the range 0 to Replicas-1, it will be counted towards MaxUnavailable.fsGroupPolicy defines if the underlying volume supports changing ownership and permission of the volume before being mounted. Refer to the specific FSGroupPolicy values for additional details. This field was immutable in Kubernetes < 1.29 and now is mutable. Defaults to ReadWriteOnceWithFSType, which will examine each volume to determine if Kubernetes should modify ownership and permissions of the volume. With the default policy the defined fsGroup will only be applied if a fstype is defined and the volume's access mode contains ReadWriteOnce.nominatedNodeName is set only when this pod preempts other pods on the node, but it cannot be scheduled right away as preemption victims receive their graceful termination periods. This field does not guarantee that the pod will be scheduled on this node. Scheduler may decide to place the pod elsewhere if other nodes become available sooner. Scheduler may also decide to give the resources on this node to a higher priority pod that is created after preemption. As a result, this field may be different than PodSpec.nodeName when the pod is scheduled.metrics contains the specifications for which to use to calculate the desired replica count (the maximum replica count across all metrics will be used). The desired replica count is calculated multiplying the ratio between the target value and the current value by the current number of pods. Ergo, metrics used must decrease as the pod count is increased, and vice-versa. See the individual metric source types for more information about how each type of metric must respond. If not set, the default metric will be set to 80% average CPU utilization.Name of VolumeAttributesClass to which this persistent volume belongs. Empty value is not allowed. When this field is not set, it indicates that this volume does not belong to any VolumeAttributesClass. This field is mutable and can be changed by the CSI driver after a volume has been updated successfully to a new class. For an unbound PersistentVolume, the volumeAttributesClassName will be matched with unbound PersistentVolumeClaims during the binding process. This is a beta field and requires enabling VolumeAttributesClass feature (off by default).Name is an identifier for this match condition, used for strategic merging of MatchConditions, as well as providing an identifier for logging purposes. A good name should be descriptive of the associated expression. Name must be a qualified name consisting of alphanumeric characters, '-', '_' or '.', and must start and end with an alphanumeric character (e.g. 'MyName', or 'my.name', or '123-abc', regex used for validation is '([A-Za-z0-9][-A-Za-z0-9_.]*)?[A-Za-z0-9]') with an optional DNS subdomain prefix and '/' (e.g. 'example.com/MyName') Required.IPFamilyPolicy represents the dual-stack-ness requested or required by this Service. If there is no value provided, then this field will be set to SingleStack. Services can be "SingleStack" (a single IP family), "PreferDualStack" (two IP families on dual-stack configured clusters or a single IP family on single-stack clusters), or "RequireDualStack" (two IP families on dual-stack configured clusters, otherwise fail). The ipFamilies and clusterIPs fields depend on the value of this field. This field will be wiped when updating a service to type ExternalName.Assigned reports the checkpointed config the node will try to use. When Node.Spec.ConfigSource is updated, the node checkpoints the associated config payload to local disk, along with a record indicating intended config. The node refers to this record to choose its config checkpoint, and reports this record in Assigned. Assigned only updates in the status after the record has been checkpointed to disk. When the Kubelet is restarted, it tries to make the Assigned config the Active config by loading and validating the checkpointed payload identified by Assigned.handler specifies the underlying runtime and configuration that the CRI implementation will use to handle pods of this class. The possible values are specific to the node & CRI configuration. It is assumed that all handlers are available on every node, and handlers of the same name are equivalent on every node. For example, a handler called "runc" might specify that the runc OCI runtime (using native Linux containers) will be used to run the containers in a pod. The Handler must be lowercase, conform to the DNS Label (RFC 1123) requirements, and is immutable.handler specifies the underlying runtime and configuration that the CRI implementation will use to handle pods of this class. The possible values are specific to the node & CRI configuration. It is assumed that all handlers are available on every node, and handlers of the same name are equivalent on every node. For example, a handler called "runc" might specify that the runc OCI runtime (using native Linux containers) will be used to run the containers in a pod. The handler must be lowercase, conform to the DNS Label (RFC 1123) requirements, and is immutable.If referring to a piece of an object instead of an entire object, this string should contain a valid JSON/Go field access statement, such as desiredState.manifest.containers[2]. For example, if the object reference is to a container within a pod, this would take on a value like: "spec.containers{name}" (where "name" refers to the name of the container that triggered the event) or if no container name is specified "spec.containers[2]" (container with index 2 in this pod). This syntax is chosen only to have some well-defined way of referencing a part of an object.CSIDriver captures information about a Container Storage Interface (CSI) volume driver deployed on the cluster. CSI drivers do not need to create the CSIDriver object directly. Instead they may use the cluster-driver-registrar sidecar container. When deployed with a CSI driver it automatically creates a CSIDriver object representing the driver. Kubernetes attach detach controller uses this object to determine whether attach is required. Kubelet uses this object to determine whether pod information needs to be passed on mount. CSIDriver objects are non-namespaced.Whether the container runtime should close the stdin channel after it has been opened by a single attach. When stdin is true the stdin stream will remain open across multiple attach sessions. If stdinOnce is set to true, stdin is opened on container start, is empty until the first client attaches to stdin, and then remains open and accepts data until the client disconnects, at which time stdin is closed and remains closed until the container is restarted. If this flag is false, a container processes that reads from stdin will never receive an EOF. Default is falseMatchResources declares what resources match this binding and will be validated by it. Note that this is intersected with the policy's matchConstraints, so only requests that are matched by the policy can be selected by this. If this is unset, all resources matched by the policy are validated by this binding When resourceRules is unset, it does not constrain resource matching. If a resource is matched by the other fields of this object, it will be validated. Note that this is differs from ValidatingAdmissionPolicy matchConstraints, where resourceRules are required.FailedIndexes holds the failed indexes when spec.backoffLimitPerIndex is set. The indexes are represented in the text format analogous as for the `completedIndexes` field, ie. they are kept as decimal integers separated by commas. The numbers are listed in increasing order. Three or more consecutive numbers are compressed and represented by the first and last element of the series, separated by a hyphen. For example, if the failed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7". The set of failed indexes cannot overlap with the set of completed indexes.A list of groups applied to the first process run in each container, in addition to the container's primary GID and fsGroup (if specified). If the SupplementalGroupsPolicy feature is enabled, the supplementalGroupsPolicy field determines whether these are in addition to or instead of any group memberships defined in the container image. If unspecified, no additional groups are added, though group memberships defined in the container image may still be used, depending on the supplementalGroupsPolicy field. Note that this field cannot be set when spec.os.name is windows.ResourcePolicyRule is a predicate that matches some resource requests, testing the request's verb and the target resource. A ResourcePolicyRule matches a resource request if and only if: (a) at least one member of verbs matches the request, (b) at least one member of apiGroups matches the request, (c) at least one member of resources matches the request, and (d) either (d1) the request does not specify a namespace (i.e., `Namespace==""`) and clusterScope is true or (d2) the request specifies a namespace and least one member of namespaces matches the request's namespace.runtimeHandler specifies the underlying runtime and configuration that the CRI implementation will use to handle pods of this class. The possible values are specific to the node & CRI configuration. It is assumed that all handlers are available on every node, and handlers of the same name are equivalent on every node. For example, a handler called "runc" might specify that the runc OCI runtime (using native Linux containers) will be used to run the containers in a pod. The runtimeHandler must be lowercase, conform to the DNS Label (RFC 1123) requirements, and is immutable.Optional duration in seconds the pod needs to terminate gracefully. May be decreased in delete request. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). If this value is nil, the default grace period will be used instead. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. Defaults to 30 seconds.AdminAccess indicates that this is a claim for administrative access to the device(s). Claims with AdminAccess are expected to be used for monitoring or other management services for a device. They ignore all ordinary claims to the device with respect to access modes and any resource allocations. This field can only be set when deviceClassName is set and no subrequests are specified in the firstAvailable list. This is an alpha field and requires enabling the DRAAdminAccess feature gate. Admin access is disabled if this field is unset or set to false, otherwise it is enabled.continue may be set if the user set a limit on the number of items returned, and indicates that the server has more data available. The value is opaque and may be used to issue another request to the endpoint that served this list to retrieve the next set of available objects. Continuing a consistent list may not be possible if the server configuration has changed or more than a few minutes have passed. The resourceVersion field returned when using this continue value will be identical to the value in the first response, unless you have received this token from an error message.WhenUnsatisfiable indicates how to deal with a pod if it doesn't satisfy the spread constraint. - DoNotSchedule (default) tells the scheduler not to schedule it. - ScheduleAnyway tells the scheduler to schedule the pod in any location, but giving higher precedence to topologies that would help reduce the skew. A constraint is considered "Unsatisfiable" for an incoming pod if and only if every possible node assignment for that pod would violate "MaxSkew" on some topology. For example, in a 3-zone cluster, MaxSkew is set to 1, and pods with the same labelSelector spread as 3/1/1: CSINode holds information about all CSI drivers installed on a node. CSI drivers do not need to create the CSINode object directly. As long as they use the node-driver-registrar sidecar container, the kubelet will automatically populate the CSINode object for the CSI driver as part of kubelet plugin registration. CSINode has the same name as a node. If the object is missing, it means either there are no CSI Drivers available on the node, or the Kubelet version is low enough that it doesn't create this object. CSINode has an OwnerReference that points to the corresponding node object.insecureSkipTLSVerifyBackend indicates that the apiserver should not confirm the validity of the serving certificate of the backend it is connecting to. This will make the HTTPS connection between the apiserver and the backend insecure. This means the apiserver cannot verify the log data it is receiving came from the real kubelet. If the kubelet is configured to verify the apiserver's TLS credentials, it does not mean the connection to the real kubelet is vulnerable to a man in the middle attack (e.g. an attacker could not intercept the actual log data coming from the real kubelet).allowedUsages specifies a set of usage contexts the key will be valid for. See: https://tools.ietf.org/html/rfc5280#section-4.2.1.3 https://tools.ietf.org/html/rfc5280#section-4.2.1.12 Valid values are: "signing", "digital signature", "content commitment", "key encipherment", "key agreement", "data encipherment", "cert sign", "crl sign", "encipher only", "decipher only", "any", "server auth", "client auth", "code signing", "email protection", "s/mime", "ipsec end system", "ipsec tunnel", "ipsec user", "timestamping", "ocsp signing", "microsoft sgc", "netscape sgc"MatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with `labelSelector` as `key in (value)` to select the group of existing pods which pods will be taken into consideration for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both matchLabelKeys and labelSelector. Also, matchLabelKeys cannot be set when labelSelector isn't set.uncountedTerminatedPods holds the UIDs of Pods that have terminated but the job controller hasn't yet accounted for in the status counters. The job controller creates pods with a finalizer. When a pod terminates (succeeded or failed), the controller does three steps to account for it in the job status: 1. Add the pod UID to the arrays in this field. 2. Remove the pod finalizer. 3. Remove the pod UID from the arrays while increasing the corresponding counter. Old jobs might not be tracked using this field, in which case the field remains null. The structure is empty for finished jobs.IPAddress represents a single IP of a single IP Family. The object is designed to be used by APIs that operate on IP addresses. The object is used by the Service core API for allocation of IP addresses. An IP address can be represented in different formats, to guarantee the uniqueness of the IP, the name of the object is the IP address in canonical format, four decimal digits separated by dots suppressing leading zeros for IPv4 and the representation defined by RFC 5952 for IPv6. Valid: 192.168.1.5 or 2001:db8::1 or 2001:db8:aaaa:bbbb:cccc:dddd:eeee:1 Invalid: 10.01.2.3 or 2001:db8:0:0:0::1The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node matches the corresponding matchExpressions; the node(s) with the highest sum are the most preferred.The port on each node on which this service is exposed when type is NodePort or LoadBalancer. Usually assigned by the system. If a value is specified, in-range, and not in use it will be used, otherwise the operation will fail. If not specified, a port will be allocated if this Service requires one. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type from NodePort to ClusterIP). More info: https://kubernetes.io/docs/concepts/services-networking/service/#type-nodeportMismatchLabelKeys is a set of pod label keys to select which pods will be taken into consideration. The keys are used to lookup values from the incoming pod labels, those key-value labels are merged with `labelSelector` as `key notin (value)` to select the group of existing pods which pods will be taken into consideration for the incoming pod's pod (anti) affinity. Keys that don't exist in the incoming pod labels will be ignored. The default value is empty. The same key is forbidden to exist in both mismatchLabelKeys and labelSelector. Also, mismatchLabelKeys cannot be set when labelSelector isn't set.succeededCount specifies the minimal required size of the actual set of the succeeded indexes for the Job. When succeededCount is used along with succeededIndexes, the check is constrained only to the set of indexes specified by succeededIndexes. For example, given that succeededIndexes is "1-4", succeededCount is "3", and completed indexes are "1", "3", and "5", the Job isn't declared as succeeded because only "1" and "3" indexes are considered in that rules. When this field is null, this doesn't default to any value and is never evaluated at any time. When specified it needs to be a positive integer.Use the host's user namespace. Optional: Default to true. If set to true or not present, the pod will be run in the host user namespace, useful for when the pod needs a feature only available to the host user namespace, such as loading a kernel module with CAP_SYS_MODULE. When set to false, a new userns is created for the pod. Setting false is useful for mitigating container breakout vulnerabilities even allowing users to run their containers as root without actually having root privileges on the host. This field is alpha-level and is only honored by servers that enable the UserNamespacesSupport feature.Audiences are audience identifiers chosen by the authenticator that are compatible with both the TokenReview and token. An identifier is any identifier in the intersection of the TokenReviewSpec audiences and the token's audiences. A client of the TokenReview API that sets the spec.audiences field should validate that a compatible audience identifier is returned in the status.audiences field to ensure that the TokenReview server is audience aware. If a TokenReview returns an empty status.audience field where status.authenticated is "true", the token is valid against the audience of the Kubernetes API server.tolerance is the tolerance on the ratio between the current and desired metric value under which no updates are made to the desired number of replicas (e.g. 0.01 for 1%). Must be greater than or equal to zero. If not set, the default cluster-wide tolerance is applied (by default 10%). For example, if autoscaling is configured with a memory consumption target of 100Mi, and scale-down and scale-up tolerances of 5% and 1% respectively, scaling will be triggered when the actual consumption falls below 95Mi or exceeds 101Mi. This is an alpha field and requires enabling the HPAConfigurableTolerance feature gate.podReplacementPolicy specifies when to create replacement Pods. Possible values are: - TerminatingOrFailed means that we recreate pods when they are terminating (has a metadata.deletionTimestamp) or failed. - Failed means to wait until a previously created Pod is fully terminated (has phase Failed or Succeeded) before creating a replacement Pod. When using podFailurePolicy, Failed is the the only allowed value. TerminatingOrFailed and Failed are allowed values when podFailurePolicy is not in use. This is an beta field. To use this, enable the JobPodReplacementPolicy feature toggle. This is on by default.a map of client CIDR to server address that is serving this group. This is to help clients reach servers in the most network-efficient way possible. Clients can use the appropriate server address as per the CIDR that they match. In case of multiple matches, clients should use the longest matching CIDR. The server returns only those CIDRs that it thinks that the client can match. For example: the master will return an internal IP CIDR only, if the client reaches the server using an internal IP. Server looks at X-Forwarded-For header or X-Real-Ip header or request.RemoteAddr (in that order) to get the client IP.The scheduler will prefer to schedule pods to nodes that satisfy the affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.An opaque value that represents the internal version of this object that can be used by clients to determine when objects have changed. May be used for optimistic concurrency, change detection, and the watch operation on a resource or set of resources. Clients must treat these values as opaque and passed unmodified back to the server. They may only be valid for a particular resource or set of resources. Populated by the system. Read-only. Value must be treated as opaque by clients and . More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#concurrency-control-and-consistencytrustBundle contains the individual X.509 trust anchors for this bundle, as PEM bundle of PEM-wrapped, DER-formatted X.509 certificates. The data must consist only of PEM certificate blocks that parse as valid X.509 certificates. Each certificate must include a basic constraints extension with the CA bit set. The API server will reject objects that contain duplicate certificates, or that use PEM block headers. Users of ClusterTrustBundles, including Kubelet, are free to reorder and deduplicate certificate blocks in this file according to their own logic, as well as to drop PEM block headers and inter-block data.dataSource field can be used to specify either: * An existing VolumeSnapshot object (snapshot.storage.k8s.io/VolumeSnapshot) * An existing PVC (PersistentVolumeClaim) If the provisioner or an external controller can support the specified data source, it will create a new volume based on the contents of the specified data source. When the AnyVolumeDataSource feature gate is enabled, dataSource contents will be copied to dataSourceRef, and dataSourceRef contents will be copied to dataSource when dataSourceRef.namespace is not specified. If the namespace is specified, then dataSourceRef will not be copied to dataSource.ClusterTrustBundle allows a pod to access the `.spec.trustBundle` field of ClusterTrustBundle objects in an auto-updating file. Alpha, gated by the ClusterTrustBundleProjection feature gate. ClusterTrustBundle objects can either be selected by name, or by the combination of signer name and a label selector. Kubelet performs aggressive normalization of the PEM contents written into the pod filesystem. Esoteric PEM features such as inter-block comments and block headers are stripped. Certificates are deduplicated. The ordering of certificates within the file is arbitrary, and Kubelet may change the order over time.failurePolicy defines how to handle failures for the admission policy. Failures can occur from CEL expression parse errors, type check errors, runtime errors and invalid or mis-configured policy definitions or bindings. A policy is invalid if spec.paramKind refers to a non-existent Kind. A binding is invalid if spec.paramRef.name refers to a non-existent resource. failurePolicy does not define how validations that evaluate to false are handled. When failurePolicy is set to Fail, ValidatingAdmissionPolicyBinding validationActions define how failures are enforced. Allowed values are Ignore or Fail. Defaults to Fail.DeviceClassName references a specific DeviceClass, which can define additional configuration and selectors to be inherited by this request. A class is required if no subrequests are specified in the firstAvailable list and no class can be set if subrequests are specified in the firstAvailable list. Which classes are available depends on the cluster. Administrators may use this to restrict which devices may get requested by only installing classes with selectors for permitted devices. If users are free to request anything without restrictions, then administrators can create an empty DeviceClass for users to reference.Endpoints is a collection of endpoints that implement the actual service. Example: Name: "mysvc", Subsets: [ { Addresses: [{"ip": "10.10.1.1"}, {"ip": "10.10.2.2"}], Ports: [{"name": "a", "port": 8675}, {"name": "b", "port": 309}] }, { Addresses: [{"ip": "10.10.3.3"}], Ports: [{"name": "a", "port": 93}, {"name": "b", "port": 76}] }, ] Endpoints is a legacy API and does not contain information about all Service features. Use discoveryv1.EndpointSlice for complete information about Service endpoints. Deprecated: This API is deprecated in v1.33+. Use discoveryv1.EndpointSlice.The scheduler will prefer to schedule pods to nodes that satisfy the anti-affinity expressions specified by this field, but it may choose a node that violates one or more of the expressions. The node that is most preferred is the one with the greatest sum of weights, i.e. for each node that meets all of the scheduling requirements (resource request, requiredDuringScheduling anti-affinity expressions, etc.), compute a sum by iterating through the elements of this field and adding "weight" to the sum if the node has pods which matches the corresponding podAffinityTerm; the node(s) with the highest sum are the most preferred.The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. By default, a fixed value of 1 is used. Example: when this is set to 30%, the old RC can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old RC can be scaled down further, followed by scaling up the new RC, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods.TopologyKey is the key of node labels. Nodes that have a label with this key and identical values are considered to be in the same topology. We consider each as a "bucket", and try to put balanced number of pods into each bucket. We define a domain as a particular instance of a topology. Also, we define an eligible domain as a domain whose nodes meet the requirements of nodeAffinityPolicy and nodeTaintsPolicy. e.g. If TopologyKey is "kubernetes.io/hostname", each Node is a domain of that topology. And, if TopologyKey is "topology.kubernetes.io/zone", each zone is a domain of that topology. It's a required field.The maximum number of pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). Absolute number is calculated from percentage by rounding down. This can not be 0 if MaxSurge is 0. Defaults to 25%. Example: when this is set to 30%, the old ReplicaSet can be scaled down to 70% of desired pods immediately when the rolling update starts. Once new pods are ready, old ReplicaSet can be scaled down further, followed by scaling up the new ReplicaSet, ensuring that the total number of pods available at all times during the update is at least 70% of desired pods.Generation tracks the change in a pool over time. Whenever a driver changes something about one or more of the resources in a pool, it must change the generation in all ResourceSlices which are part of that pool. Consumers of ResourceSlices should only consider resources from the pool with the highest generation number. The generation may be reset by drivers, which should be fine for consumers, assuming that all ResourceSlices in a pool are updated to match or deleted. Combined with ResourceSliceCount, this mechanism enables consumers to detect pools which are comprised of multiple ResourceSlices and are in an incomplete state.status is the status of the ControllerModifyVolume operation. It can be in any of following states: - Pending Pending indicates that the PersistentVolumeClaim cannot be modified due to unmet requirements, such as the specified VolumeAttributesClass not existing. - InProgress InProgress indicates that the volume is being modified. - Infeasible Infeasible indicates that the request has been rejected as invalid by the CSI driver. To resolve the error, a valid VolumeAttributesClass needs to be specified. Note: New statuses can be added in the future. Consumers should check for unknown statuses and fail appropriately.If specified, the request's tolerations. Tolerations for NoSchedule are required to allocate a device which has a taint with that effect. The same applies to NoExecute. In addition, should any of the allocated devices get tainted with NoExecute after allocation and that effect is not tolerated, then all pods consuming the ResourceClaim get deleted to evict them. The scheduler will not let new pods reserve the claim while it has these tainted devices. Once all pods are evicted, the claim will get deallocated. The maximum number of tolerations is 16. This is an alpha field and requires enabling the DRADeviceTaints feature gate.`handSize` is a small positive number that configures the shuffle sharding of requests into queues. When enqueuing a request at this priority level the request's flow identifier (a string pair) is hashed and the hash value is used to shuffle the list of queues and deal a hand of the size specified here. The request is put into one of the shortest queues in that hand. `handSize` must be no larger than `queues`, and should be significantly smaller (so that a few heavy flows do not saturate most of the queues). See the user-facing documentation for more extensive guidance on setting this field. This field has a default value of 8.publishNotReadyAddresses indicates that any agent which deals with endpoints for this Service should disregard any indications of ready/not-ready. The primary use case for setting this field is for a StatefulSet's Headless Service to propagate SRV DNS records for its Pods for the purpose of peer discovery. The Kubernetes controllers that generate Endpoints and EndpointSlice resources for Services interpret this to mean that all endpoints are considered "ready" even if the Pods themselves are not. Agents which consume only Kubernetes generated endpoints through the Endpoints or EndpointSlice resources can safely assume this behavior.Statuses of init containers in this pod. The most recent successful non-restartable init container will have ready = true, the most recently started container will have startTime set. Each init container in the pod should have at most one status in this list, and all statuses should be for containers in the pod. However this is not enforced. If a status for a non-existent container is present in the list, or the list has duplicate names, the behavior of various Kubernetes components is not defined and those statuses might be ignored. More info: https://kubernetes.io/docs/concepts/workloads/pods/pod-lifecycle/#pod-and-container-statustype of the condition. Known conditions are "Approved", "Denied", and "Failed". An "Approved" condition is added via the /approval subresource, indicating the request was approved and should be issued by the signer. A "Denied" condition is added via the /approval subresource, indicating the request was denied and should not be issued by the signer. A "Failed" condition is added via the /status subresource, indicating the signer failed to issue the certificate. Approved and Denied conditions are mutually exclusive. Approved, Denied, and Failed conditions cannot be removed once added. Only one condition of a given type is allowed.Arguments to the entrypoint. The image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shellreinvocationPolicy indicates whether mutations may be called multiple times per MutatingAdmissionPolicyBinding as part of a single admission evaluation. Allowed values are "Never" and "IfNeeded". Never: These mutations will not be called more than once per binding in a single admission evaluation. IfNeeded: These mutations may be invoked more than once per binding for a single admission request and there is no guarantee of order with respect to other admission plugins, admission webhooks, bindings of this policy and admission policies. Mutations are only reinvoked when mutations change the object after this mutation is invoked. Required.SelfSubjectRulesReview enumerates the set of actions the current user can perform within a namespace. The returned list of actions may be incomplete depending on the server's authorization mode, and any errors experienced during the evaluation. SelfSubjectRulesReview should be used by UIs to show/hide actions, or to quickly let an end user reason about their permissions. It should NOT Be used by external systems to drive authorization decisions as this raises confused deputy, cache lifetime/revocation, and correctness concerns. SubjectAccessReview, and LocalAccessReview are the correct way to defer authorization decisions to the API server.tokenRequests indicates the CSI driver needs pods' service account tokens it is mounting volume for to do necessary authentication. Kubelet will pass the tokens in VolumeContext in the CSI NodePublishVolume calls. The CSI driver should parse and validate the following VolumeContext: "csi.storage.k8s.io/serviceAccount.tokens": { "": { "token": , "expirationTimestamp": , }, ... } Note: Audience in each TokenRequest should be different and at most one token is empty string. To receive a new token after expiry, RequiresRepublish can be used to trigger NodePublishVolume periodically.Arguments to the entrypoint. The container image's CMD is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shellhealthCheckNodePort specifies the healthcheck nodePort for the service. This only applies when type is set to LoadBalancer and externalTrafficPolicy is set to Local. If a value is specified, is in-range, and is not in use, it will be used. If not specified, a value will be automatically allocated. External systems (e.g. load-balancers) can use this port to determine if a given node holds endpoints for this service or not. If this field is specified when creating a Service which does not need it, creation will fail. This field will be wiped when updating a Service to no longer need it (e.g. changing type). This field cannot be updated once set.List of addresses reachable to the node. Queried from cloud provider, if available. More info: https://kubernetes.io/docs/reference/node/node-status/#addresses Note: This field is declared as mergeable, but the merge key is not sufficiently unique, which can cause data corruption when it is merged. Callers should instead use a full-replacement patch. See https://pr.k8s.io/79391 for an example. Consumers should assume that addresses can change during the lifetime of a Node. However, there are some exceptions where this may not be possible, such as Pods that inherit a Node's address in its own status or consumers of the downward API (status.hostIP).Specifies the action taken on a pod failure when the requirements are satisfied. Possible values are: - FailJob: indicates that the pod's job is marked as Failed and all running pods are terminated. - FailIndex: indicates that the pod's index is marked as Failed and will not be restarted. - Ignore: indicates that the counter towards the .backoffLimit is not incremented and a replacement pod is created. - Count: indicates that the pod is handled in the default way - the counter towards the .backoffLimit is incremented. Additional values are considered to be added in the future. Clients should react to an unknown action by skipping the rule.ObjectSelector decides whether to run the webhook based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the webhook, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.IngressClassName is the name of the IngressClass cluster resource. The associated IngressClass defines which controller will implement the resource. This replaces the deprecated `kubernetes.io/ingress.class` annotation. For backwards compatibility, when that annotation is set, it must be given precedence over this field. The controller may emit a warning if the field and annotation have different values. Implementations of this API should ignore Ingresses without a class specified. An IngressClass resource may be marked as default, which can be used to set a default value for this field. For more information, refer to the IngressClass documentation.ingressClassName is the name of the IngressClass cluster resource. The associated IngressClass defines which controller will implement the resource. This replaces the deprecated `kubernetes.io/ingress.class` annotation. For backwards compatibility, when that annotation is set, it must be given precedence over this field. The controller may emit a warning if the field and annotation have different values. Implementations of this API should ignore Ingresses without a class specified. An IngressClass resource may be marked as default, which can be used to set a default value for this field. For more information, refer to the IngressClass documentation.topologyKeys is the list of keys supported by the driver. When a driver is initialized on a cluster, it provides a set of topology keys that it understands (e.g. "company.com/zone", "company.com/region"). When a driver is initialized on a node, it provides the same topology keys along with values. Kubelet will expose these topology keys as labels on its own node object. When Kubernetes does topology aware provisioning, it can use this list to determine which labels it should retrieve from the node object and pass back to the driver. It is possible for different nodes to use different topology keys. This can be empty if driver does not support topology.The maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. Defaults to 25%. Example: when this is set to 30%, the new ReplicaSet can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new ReplicaSet can be scaled up further, ensuring that total number of pods running at any time during the update is at most 130% of desired pods.manualSelector controls generation of pod labels and pod selectors. Leave `manualSelector` unset unless you are certain what you are doing. When false or unset, the system pick labels unique to this job and appends those labels to the pod template. When true, the user is responsible for picking unique labels and specifying the selector. Failure to pick a unique label may cause this and other jobs to not function correctly. However, You may see `manualSelector=true` in jobs that were created with the old `extensions/v1beta1` API. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/#specifying-your-own-pod-selectorThe maximum number of pods that can be scheduled above the desired number of pods. Value can be an absolute number (ex: 5) or a percentage of desired pods (ex: 10%). This can not be 0 if MaxUnavailable is 0. Absolute number is calculated from percentage by rounding up. By default, a value of 1 is used. Example: when this is set to 30%, the new RC can be scaled up immediately when the rolling update starts, such that the total number of old and new pods do not exceed 130% of desired pods. Once old pods have been killed, new RC can be scaled up further, ensuring that total number of pods running at any time during the update is at most 130% of desired pods.storageCapacity indicates that the CSI volume driver wants pod scheduling to consider the storage capacity that the driver deployment will report by creating CSIStorageCapacity objects with capacity information, if set to true. The check can be enabled immediately when deploying a driver. In that case, provisioning new volumes with late binding will pause until the driver deployment has published some suitable CSIStorageCapacity object. Alternatively, the driver can be deployed with the field unset or false and it can be flipped later when storage capacity information has been published. This field was immutable in Kubernetes <= 1.22 and now is mutable.ResourceClaimTemplateName is the name of a ResourceClaimTemplate object in the same namespace as this pod. The template will be used to create a new ResourceClaim, which will be bound to this pod. When this pod is deleted, the ResourceClaim will also be deleted. The pod name and resource name, along with a generated component, will be used to form a unique name for the ResourceClaim, which will be recorded in pod.status.resourceClaimStatuses. This field is immutable and no changes will be made to the corresponding ResourceClaim by the control plane after creating the ResourceClaim. Exactly one of ResourceClaimName and ResourceClaimTemplateName must be set.Entrypoint array. Not executed within a shell. The image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shellObjectSelector decides whether to run the validation based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the cel validation, and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.Overhead represents the resource overhead associated with running a pod for a given RuntimeClass. This field will be autopopulated at admission time by the RuntimeClass admission controller. If the RuntimeClass admission controller is enabled, overhead must not be set in Pod create requests. The RuntimeClass admission controller will reject Pod create requests which have the overhead already set. If RuntimeClass is configured and selected in the PodSpec, Overhead will be set to the value defined in the corresponding RuntimeClass, otherwise it will remain unset and treated as zero. More info: https://git.k8s.io/enhancements/keps/sig-node/688-pod-overhead/README.mdnamespace is the namespace of the referenced resource. Allows limiting the search for params to a specific namespace. Applies to both `name` and `selector` fields. A per-namespace parameter may be used by specifying a namespace-scoped `paramKind` in the policy and leaving this field empty. - If `paramKind` is cluster-scoped, this field MUST be unset. Setting this field results in a configuration error. - If `paramKind` is namespace-scoped, the namespace of the object being evaluated for admission will be used when this field is left unset. Take care that if this is left empty the binding must not match any cluster-scoped resources, which will result in an error.ObjectSelector decides whether to run the policy based on if the object has matching labels. objectSelector is evaluated against both the oldObject and newObject that would be sent to the policy's expression (CEL), and is considered to match if either object matches the selector. A null object (oldObject in the case of create, or newObject in the case of delete) or an object that cannot have labels (like a DeploymentRollback or a PodProxyOptions object) is not considered to match. Use the object selector only if the webhook is opt-in, because end users may skip the admission webhook by setting the labels. Default to the empty LabelSelector, which matches everything.Entrypoint array. Not executed within a shell. The container image's ENTRYPOINT is used if this is not provided. Variable references $(VAR_NAME) are expanded using the container's environment. If a variable cannot be resolved, the reference in the input string will be unchanged. Double $$ are reduced to a single $, which allows for escaping the $(VAR_NAME) syntax: i.e. "$$(VAR_NAME)" will produce the string literal "$(VAR_NAME)". Escaped references will never be expanded, regardless of whether the variable exists or not. Cannot be updated. More info: https://kubernetes.io/docs/tasks/inject-data-application/define-command-argument-container/#running-a-command-in-a-shellGenerateName is an optional prefix, used by the server, to generate a unique name ONLY IF the Name field has not been provided. If this field is used, the name returned to the client will be different than the name passed. This value will also be combined with a unique suffix. The provided value has the same validation rules as the Name field, and may be truncated by the length of the suffix required to make the value unique on the server. If this field is specified and the generated name exists, the server will return a 409. Applied only if Name is not specified. More info: https://git.k8s.io/community/contributors/devel/sig-architecture/api-conventions.md#idempotencyattachRequired indicates this CSI volume driver requires an attach operation (because it implements the CSI ControllerPublishVolume() method), and that the Kubernetes attach detach controller should call the attach volume interface which checks the volumeattachment status and waits until the volume is attached before proceeding to mounting. The CSI external-attacher coordinates with CSI volume driver and updates the volumeattachment status when the attach operation is complete. If the CSIDriverRegistry feature gate is enabled and the value is specified to false, the attach operation will be skipped. Otherwise the attach operation will be called. This field is immutable.HPAScalingRules configures the scaling behavior for one direction via scaling Policy Rules and a configurable metric tolerance. Scaling Policy Rules are applied after calculating DesiredReplicas from metrics for the HPA. They can limit the scaling velocity by specifying scaling policies. They can prevent flapping by specifying the stabilization window, so that the number of replicas is not set instantly, instead, the safest value from the stabilization window is chosen. The tolerance is applied to the metric values and prevents scaling too eagerly for small metric variations. (Note that setting a tolerance requires enabling the alpha HPAConfigurableTolerance feature gate.)CertificateSigningRequest objects provide a mechanism to obtain x509 certificates by submitting a certificate signing request, and having it asynchronously approved and issued. Kubelets use this API to obtain: 1. client certificates to authenticate to kube-apiserver (with the "kubernetes.io/kube-apiserver-client-kubelet" signerName). 2. serving certificates for TLS endpoints kube-apiserver can connect to securely (with the "kubernetes.io/kubelet-serving" signerName). This API can be used to request client certificates to authenticate to kube-apiserver (with the "kubernetes.io/kube-apiserver-client" signerName), or to obtain certificates from custom non-Kubernetes signers.`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats nominally reserved for this priority level. This DOES NOT limit the dispatching from this priority level but affects the other priority levels through the borrowing mechanism. The server's concurrency limit (ServerCL) is divided among all the priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. This field has a default value of zero.ControllerRevision implements an immutable snapshot of state data. Clients are responsible for serializing and deserializing the objects that contain their internal state. Once a ControllerRevision has been successfully created, it can not be updated. The API Server will fail validation of all requests that attempt to mutate the Data field. ControllerRevisions may, however, be deleted. Note that, due to its use by both the DaemonSet and StatefulSet controllers for update and rollback, this object is beta. However, it may be subject to name and representation changes in future releases, and clients should not depend on its stability. It is primarily for internal use by controllers.remainingItemCount is the number of subsequent items in the list which are not included in this list response. If the list request contained label or field selectors, then the number of remaining items is unknown and the field will be left unset and omitted during serialization. If the list is complete (either because it is not chunking or because this is the last chunk), then there are no more remaining items and this field will be left unset and omitted during serialization. Servers older than v1.15 do not set this field. The intended use of the remainingItemCount is *estimating* the size of a collection. Clients should not rely on the remainingItemCount to be set or to be exact.usages specifies a set of key usages requested in the issued certificate. Requests for TLS client certificates typically request: "digital signature", "key encipherment", "client auth". Requests for TLS serving certificates typically request: "key encipherment", "digital signature", "server auth". Valid values are: "signing", "digital signature", "content commitment", "key encipherment", "key agreement", "data encipherment", "cert sign", "crl sign", "encipher only", "decipher only", "any", "server auth", "client auth", "code signing", "email protection", "s/mime", "ipsec end system", "ipsec tunnel", "ipsec user", "timestamping", "ocsp signing", "microsoft sgc", "netscape sgc"key specifies the audit annotation key. The audit annotation keys of a ValidatingAdmissionPolicy must be unique. The key must be a qualified name ([A-Za-z0-9][-A-Za-z0-9_.]*) no more than 63 bytes in length. The key is combined with the resource name of the ValidatingAdmissionPolicy to construct an audit annotation key: "{ValidatingAdmissionPolicy name}/{key}". If an admission webhook uses the same resource name as this ValidatingAdmissionPolicy and the same audit annotation key, the annotation key will be identical. In this case, the first annotation written with the key will be included in the audit event and all subsequent annotations with the same key will be discarded. Required.MatchLabelKeys is a set of pod label keys to select the pods over which spreading will be calculated. The keys are used to lookup values from the incoming pod labels, those key-value labels are ANDed with labelSelector to select the group of existing pods over which spreading will be calculated for the incoming pod. The same key is forbidden to exist in both MatchLabelKeys and LabelSelector. MatchLabelKeys cannot be set when LabelSelector isn't set. Keys that don't exist in the incoming pod labels will be ignored. A null or empty list means only match against labelSelector. This is a beta field and requires the MatchLabelKeysInPodTopologySpread feature gate to be enabled (enabled by default).MatchConditions is a list of conditions that must be met for a request to be sent to this webhook. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the webhook is skipped. 2. If ALL matchConditions evaluate to TRUE, the webhook is called. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the error is ignored and the webhook is skippedSecrets is a list of the secrets in the same namespace that pods running using this ServiceAccount are allowed to use. Pods are only limited to this list if this service account has a "kubernetes.io/enforce-mountable-secrets" annotation set to "true". The "kubernetes.io/enforce-mountable-secrets" annotation is deprecated since v1.32. Prefer separate namespaces to isolate access to mounted secrets. This field should not be used to find auto-generated service account token secrets for use outside of pods. Instead, tokens can be requested directly using the TokenRequest API, or service account token secrets can be manually created. More info: https://kubernetes.io/docs/concepts/configuration/secretPreStop is called immediately before a container is terminated due to an API request or management event such as liveness/startup probe failure, preemption, resource contention, etc. The handler is not called if the container crashes or exits. The Pod's termination grace period countdown begins before the PreStop hook is executed. Regardless of the outcome of the handler, the container will eventually terminate within the Pod's termination grace period (unless delayed by finalizers). Other management of the container blocks until the hook completes or until the termination grace period is reached. More info: https://kubernetes.io/docs/concepts/containers/container-lifecycle-hooks/#container-hooks`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats available at this priority level. This is used both for requests dispatched from this priority level as well as requests dispatched from other priority levels borrowing seats from this level. The server's concurrency limit (ServerCL) is divided among the Limited priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. This field has a default value of 30.FirstAvailable contains subrequests, of which exactly one will be selected by the scheduler. It tries to satisfy them in the order in which they are listed here. So if there are two entries in the list, the scheduler will only check the second one if it determines that the first one can not be used. DRA does not yet implement scoring, so the scheduler will select the first set of devices that satisfies all the requests in the claim. And if the requirements can be satisfied on more than one node, other scheduling features will determine which node is chosen. This means that the set of devices allocated to a claim might not be the optimal set available to the cluster. Scoring will be implemented later.succeededIndexes specifies the set of indexes which need to be contained in the actual set of the succeeded indexes for the Job. The list of indexes must be within 0 to ".spec.completions-1" and must not contain duplicates. At least one element is required. The indexes are represented as intervals separated by commas. The intervals can be a decimal integer or a pair of decimal integers separated by a hyphen. The number are listed in represented by the first and last element of the series, separated by a hyphen. For example, if the completed indexes are 1, 3, 4, 5 and 7, they are represented as "1,3-5,7". When this field is null, this field doesn't default to any value and is never evaluated at any time.ingressClassName is the name of an IngressClass cluster resource. Ingress controller implementations use this field to know whether they should be serving this Ingress resource, by a transitive connection (controller -> IngressClass -> Ingress resource). Although the `kubernetes.io/ingress.class` annotation (simple constant name) was never formally defined, it was widely supported by Ingress controllers to create a direct binding between Ingress controller and Ingress resources. Newly created Ingress resources should prefer using the field. However, even though the annotation is officially deprecated, for backwards compatibility reasons, ingress controllers should still honor that annotation if present.AllocationMode and its related fields define how devices are allocated to satisfy this request. Supported values are: - ExactCount: This request is for a specific number of devices. This is the default. The exact number is provided in the count field. - All: This request is for all of the matching devices in a pool. Allocation will fail if some devices are already allocated, unless adminAccess is requested. If AllocationMode is not specified, the default mode is ExactCount. If the mode is ExactCount and count is not specified, the default count is one. Any other requests must specify this field. More modes may get added in the future. Clients must refuse to handle requests with unknown modes.DEPRECATED - This group version of CSINode is deprecated by storage/v1/CSINode. See the release notes for more information. CSINode holds information about all CSI drivers installed on a node. CSI drivers do not need to create the CSINode object directly. As long as they use the node-driver-registrar sidecar container, the kubelet will automatically populate the CSINode object for the CSI driver as part of kubelet plugin registration. CSINode has the same name as a node. If the object is missing, it means either there are no CSI Drivers available on the node, or the Kubelet version is low enough that it doesn't create this object. CSINode has an OwnerReference that points to the corresponding node object.AllocationMode and its related fields define how devices are allocated to satisfy this subrequest. Supported values are: - ExactCount: This request is for a specific number of devices. This is the default. The exact number is provided in the count field. - All: This subrequest is for all of the matching devices in a pool. Allocation will fail if some devices are already allocated, unless adminAccess is requested. If AllocationMode is not specified, the default mode is ExactCount. If the mode is ExactCount and count is not specified, the default count is one. Any other subrequests must specify this field. More modes may get added in the future. Clients must refuse to handle requests with unknown modes.FieldsV1 stores a set of fields in a data structure like a Trie, in JSON format. Each key is either a '.' representing the field itself, and will always map to an empty set, or a string representing a sub-field or item. The string will follow one of these four formats: 'f:', where is the name of a field in a struct, or key in a map 'v:', where is the exact json formatted value of a list item 'i:', where is position of a item in a list 'k:', where is a map of a list item's key fields to their unique values If a key maps to an empty Fields value, the field that key represents is part of the set. The exact format is defined in sigs.k8s.io/structured-merge-diffManagedBy field indicates the controller that manages a Job. The k8s Job controller reconciles jobs which don't have this field at all or the field value is the reserved string `kubernetes.io/job-controller`, but skips reconciling Jobs with a custom value for this field. The value must be a valid domain-prefixed path (e.g. acme.io/foo) - all characters before the first "/" must be a valid subdomain as defined by RFC 1123. All characters trailing the first "/" must be valid HTTP Path characters as defined by RFC 3986. The value cannot exceed 63 characters. This field is immutable. This field is beta-level. The job controller accepts setting the field when the feature gate JobManagedBy is enabled (enabled by default).if set to true, it will trigger an unsafe deletion of the resource in case the normal deletion flow fails with a corrupt object error. A resource is considered corrupt if it can not be retrieved from the underlying storage successfully because of a) its data can not be transformed e.g. decryption failure, or b) it fails to decode into an object. NOTE: unsafe deletion ignores finalizer constraints, skips precondition checks, and removes the object from the storage. WARNING: This may potentially break the cluster if the workload associated with the resource being unsafe-deleted relies on normal deletion flow. Use only if you REALLY know what you are doing. The default value is false, and the user must opt in to enable itMutatingAdmissionPolicyBinding binds the MutatingAdmissionPolicy with parametrized resources. MutatingAdmissionPolicyBinding and the optional parameter resource together define how cluster administrators configure policies for clusters. For a given admission request, each binding will cause its policy to be evaluated N times, where N is 1 for policies/bindings that don't use params, otherwise N is the number of parameters selected by the binding. Each evaluation is constrained by a [runtime cost budget](https://kubernetes.io/docs/reference/using-api/cel/#runtime-cost-budget). Adding/removing policies, bindings, or params can not affect whether a given (policy, binding, param) combination is within its own CEL budget.ValidatingAdmissionPolicyBinding binds the ValidatingAdmissionPolicy with paramerized resources. ValidatingAdmissionPolicyBinding and parameter CRDs together define how cluster administrators configure policies for clusters. For a given admission request, each binding will cause its policy to be evaluated N times, where N is 1 for policies/bindings that don't use params, otherwise N is the number of parameters selected by the binding. The CEL expressions of a policy must have a computed CEL cost below the maximum CEL budget. Each evaluation of the policy is given an independent CEL cost budget. Adding/removing policies, bindings, or params can not affect whether a given (policy, binding, param) combination is within its own CEL budget.If specified, the request's tolerations. Tolerations for NoSchedule are required to allocate a device which has a taint with that effect. The same applies to NoExecute. In addition, should any of the allocated devices get tainted with NoExecute after allocation and that effect is not tolerated, then all pods consuming the ResourceClaim get deleted to evict them. The scheduler will not let new pods reserve the claim while it has these tainted devices. Once all pods are evicted, the claim will get deallocated. The maximum number of tolerations is 16. This field can only be set when deviceClassName is set and no subrequests are specified in the firstAvailable list. This is an alpha field and requires enabling the DRADeviceTaints feature gate.matchResources limits what resources match this binding and may be mutated by it. Note that if matchResources matches a resource, the resource must also match a policy's matchConstraints and matchConditions before the resource may be mutated. When matchResources is unset, it does not constrain resource matching, and only the policy's matchConstraints and matchConditions must match for the resource to be mutated. Additionally, matchResources.resourceRules are optional and do not constraint matching when unset. Note that this is differs from MutatingAdmissionPolicy matchConstraints, where resourceRules are required. The CREATE, UPDATE and CONNECT operations are allowed. The DELETE operation may not be matched. '*' matches CREATE, UPDATE and CONNECT.valueExpression represents the expression which is evaluated by CEL to produce an audit annotation value. The expression must evaluate to either a string or null value. If the expression evaluates to a string, the audit annotation is included with the string value. If the expression evaluates to null or empty string the audit annotation will be omitted. The valueExpression may be no longer than 5kb in length. If the result of the valueExpression is more than 10kb in length, it will be truncated to 10kb. If multiple ValidatingAdmissionPolicyBinding resources match an API request, then the valueExpression will be evaluated for each binding. All unique values produced by the valueExpressions will be joined together in a comma-separated list. Required.matchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the matchConstraints. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skippedvolumeLifecycleModes defines what kind of volumes this CSI volume driver supports. The default if the list is empty is "Persistent", which is the usage defined by the CSI specification and implemented in Kubernetes via the usual PV/PVC mechanism. The other mode is "Ephemeral". In this mode, volumes are defined inline inside the pod spec with CSIVolumeSource and their lifecycle is tied to the lifecycle of that pod. A driver has to be aware of this because it is only going to get a NodePublishVolume call for such a volume. For more information about implementing this mode, see https://kubernetes-csi.github.io/docs/ephemeral-local-volumes.html A driver can support one or more of these modes and more modes may be added in the future. This field is immutable.List of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of Ingress or Egress rules; policies that contain an Egress section are assumed to affect Egress, and all policies (whether or not they contain an Ingress section) are assumed to affect Ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an Egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8signerName indicates the associated signer, if any. In order to create or update a ClusterTrustBundle that sets signerName, you must have the following cluster-scoped permission: group=certificates.k8s.io resource=signers resourceName= verb=attest. If signerName is not empty, then the ClusterTrustBundle object must be named with the signer name as a prefix (translating slashes to colons). For example, for the signer name `example.com/foo`, valid ClusterTrustBundle object names include `example.com:foo:abc` and `example.com:foo:v1`. If signerName is empty, then the ClusterTrustBundle object's name must not have such a prefix. List/watch requests for ClusterTrustBundles can filter on this field using a `spec.signerName=NAME` field selector.Represents the relationship between the container exit code(s) and the specified values. Containers completed with success (exit code 0) are excluded from the requirement check. Possible values are: - In: the requirement is satisfied if at least one container exit code (might be multiple if there are multiple containers not restricted by the 'containerName' field) is in the set of specified values. - NotIn: the requirement is satisfied if at least one container exit code (might be multiple if there are multiple containers not restricted by the 'containerName' field) is not in the set of specified values. Additional values are considered to be added in the future. Clients should react to an unknown operator by assuming the requirement is not satisfied.Optional duration in seconds the pod needs to terminate gracefully upon probe failure. The grace period is the duration in seconds after the processes running in the pod are sent a termination signal and the time when the processes are forcibly halted with a kill signal. Set this value longer than the expected cleanup time for your process. If this value is nil, the pod's terminationGracePeriodSeconds will be used. Otherwise, this value overrides the value provided by the pod spec. Value must be non-negative integer. The value zero indicates stop immediately via the kill signal (no opportunity to shut down). This is a beta field and requires enabling ProbeTerminationGracePeriod feature gate. Minimum value is 1. spec.terminationGracePeriodSeconds is used if unset.policyTypes is a list of rule types that the NetworkPolicy relates to. Valid options are ["Ingress"], ["Egress"], or ["Ingress", "Egress"]. If this field is not specified, it will default based on the existence of ingress or egress rules; policies that contain an egress section are assumed to affect egress, and all policies (whether or not they contain an ingress section) are assumed to affect ingress. If you want to write an egress-only policy, you must explicitly specify policyTypes [ "Egress" ]. Likewise, if you want to write a policy that specifies that no egress is allowed, you must specify a policyTypes value that include "Egress" (since such a policy would not include an egress section and would otherwise default to just [ "Ingress" ]). This field is beta-level in 1.8volumeLifecycleModes defines what kind of volumes this CSI volume driver supports. The default if the list is empty is "Persistent", which is the usage defined by the CSI specification and implemented in Kubernetes via the usual PV/PVC mechanism. The other mode is "Ephemeral". In this mode, volumes are defined inline inside the pod spec with CSIVolumeSource and their lifecycle is tied to the lifecycle of that pod. A driver has to be aware of this because it is only going to get a NodePublishVolume call for such a volume. For more information about implementing this mode, see https://kubernetes-csi.github.io/docs/ephemeral-local-volumes.html A driver can support one or more of these modes and more modes may be added in the future. This field is beta. This field is immutable.AllocationMode and its related fields define how devices are allocated to satisfy this request. Supported values are: - ExactCount: This request is for a specific number of devices. This is the default. The exact number is provided in the count field. - All: This request is for all of the matching devices in a pool. At least one device must exist on the node for the allocation to succeed. Allocation will fail if some devices are already allocated, unless adminAccess is requested. If AllocationMode is not specified, the default mode is ExactCount. If the mode is ExactCount and count is not specified, the default count is one. Any other requests must specify this field. More modes may get added in the future. Clients must refuse to handle requests with unknown modes.MatchConditions is a list of conditions that must be met for a request to be validated. Match conditions filter requests that have already been matched by the rules, namespaceSelector, and objectSelector. An empty list of matchConditions matches all requests. There are a maximum of 64 match conditions allowed. If a parameter object is provided, it can be accessed via the `params` handle in the same manner as validation expressions. The exact matching logic is (in order): 1. If ANY matchCondition evaluates to FALSE, the policy is skipped. 2. If ALL matchConditions evaluate to TRUE, the policy is evaluated. 3. If any matchCondition evaluates to an error (but none are FALSE): - If failurePolicy=Fail, reject the request - If failurePolicy=Ignore, the policy is skippedparameters hold volume attributes defined by the CSI driver. These values are opaque to the Kubernetes and are passed directly to the CSI driver. The underlying storage provider supports changing these attributes on an existing volume, however the parameters field itself is immutable. To invoke a volume update, a new VolumeAttributesClass should be created with new parameters, and the PersistentVolumeClaim should be updated to reference the new VolumeAttributesClass. This field is required and must contain at least one key/value pair. The keys cannot be empty, and the maximum number of parameters is 512, with a cumulative max size of 256K. If the CSI driver rejects invalid parameters, the target PersistentVolumeClaim will be set to an "Infeasible" state in the modifyVolumeStatus field.`borrowingLimitPercent`, if present, configures a limit on how many seats this priority level can borrow from other priority levels. The limit is known as this level's BorrowingConcurrencyLimit (BorrowingCL) and is a limit on the total number of seats that this level may borrow at any one time. This field holds the ratio of that limit to the level's nominal concurrency limit. When this field is non-nil, it must hold a non-negative integer and the limit is calculated as follows. BorrowingCL(i) = round( NominalCL(i) * borrowingLimitPercent(i)/100.0 ) The value of this field can be more than 100, implying that this priority level can borrow a number of seats that is greater than its own nominal concurrency limit (NominalCL). When this field is left `nil`, the limit is effectively infinite.RecursiveReadOnly specifies whether read-only mounts should be handled recursively. If ReadOnly is false, this field has no meaning and must be unspecified. If ReadOnly is true, and this field is set to Disabled, the mount is not made recursively read-only. If this field is set to IfPossible, the mount is made recursively read-only, if it is supported by the container runtime. If this field is set to Enabled, the mount is made recursively read-only if it is supported by the container runtime, otherwise the pod will not be started and an error will be generated to indicate the reason. If this field is set to IfPossible or Enabled, MountPropagation must be set to None (or be unspecified, which defaults to None). If this field is not specified, it is treated as an equivalent of Disabled.FirstAvailable contains subrequests, of which exactly one will be satisfied by the scheduler to satisfy this request. It tries to satisfy them in the order in which they are listed here. So if there are two entries in the list, the scheduler will only check the second one if it determines that the first one cannot be used. This field may only be set in the entries of DeviceClaim.Requests. DRA does not yet implement scoring, so the scheduler will select the first set of devices that satisfies all the requests in the claim. And if the requirements can be satisfied on more than one node, other scheduling features will determine which node is chosen. This means that the set of devices allocated to a claim might not be the optimal set available to the cluster. Scoring will be implemented later.The latest available observations of an object's current state. When a Job fails, one of the conditions will have type "Failed" and status true. When a Job is suspended, one of the conditions will have type "Suspended" and status true; when the Job is resumed, the status of this condition will become false. When a Job is completed, one of the conditions will have type "Complete" and status true. A job is considered finished when it is in a terminal condition, either "Complete" or "Failed". A Job cannot have both the "Complete" and "Failed" conditions. Additionally, it cannot be in the "Complete" and "FailureTarget" conditions. The "Complete", "Failed" and "FailureTarget" conditions cannot be disabled. More info: https://kubernetes.io/docs/concepts/workloads/controllers/jobs-run-to-completion/LastKnownGood reports the checkpointed config the node will fall back to when it encounters an error attempting to use the Assigned config. The Assigned config becomes the LastKnownGood config when the node determines that the Assigned config is stable and correct. This is currently implemented as a 10-minute soak period starting when the local record of Assigned config is updated. If the Assigned config is Active at the end of this period, it becomes the LastKnownGood. Note that if Spec.ConfigSource is reset to nil (use local defaults), the LastKnownGood is also immediately reset to nil, because the local default config is always assumed good. You should not make assumptions about the node's method of determining config stability and correctness, as this may change or become configurable in the future.DisruptedPods contains information about pods whose eviction was processed by the API server eviction subresource handler but has not yet been observed by the PodDisruptionBudget controller. A pod will be in this map from the time when the API server processed the eviction request to the time when the pod is seen by PDB controller as having been marked for deletion (or after a timeout). The key in the map is the name of the pod and the value is the time when the API server processed the eviction request. If the deletion didn't occur and a pod is still there it will be removed from the list automatically by PodDisruptionBudget controller after some time. If everything goes smooth this map should be empty for the most of the time. Large number of entries in the map may indicate problems with pod deletions.DEPRECATED - This group version of ControllerRevision is deprecated by apps/v1/ControllerRevision. See the release notes for more information. ControllerRevision implements an immutable snapshot of state data. Clients are responsible for serializing and deserializing the objects that contain their internal state. Once a ControllerRevision has been successfully created, it can not be updated. The API Server will fail validation of all requests that attempt to mutate the Data field. ControllerRevisions may, however, be deleted. Note that, due to its use by both the DaemonSet and StatefulSet controllers for update and rollback, this object is beta. However, it may be subject to name and representation changes in future releases, and clients should not depend on its stability. It is primarily for internal use by controllers.The time zone name for the given schedule, see https://en.wikipedia.org/wiki/List_of_tz_database_time_zones. If not specified, this will default to the time zone of the kube-controller-manager process. The set of valid time zone names and the time zone offset is loaded from the system-wide time zone database by the API server during CronJob validation and the controller manager during execution. If no system-wide time zone database can be found a bundled version of the database is used instead. If the time zone name becomes invalid during the lifetime of a CronJob or due to a change in host configuration, the controller will stop creating new new Jobs and will create a system event with the reason UnknownTimeZone. More information can be found in https://kubernetes.io/docs/concepts/workloads/controllers/cron-jobs/#time-zonesDEPRECATED - This group version of ControllerRevision is deprecated by apps/v1beta2/ControllerRevision. See the release notes for more information. ControllerRevision implements an immutable snapshot of state data. Clients are responsible for serializing and deserializing the objects that contain their internal state. Once a ControllerRevision has been successfully created, it can not be updated. The API Server will fail validation of all requests that attempt to mutate the Data field. ControllerRevisions may, however, be deleted. Note that, due to its use by both the DaemonSet and StatefulSet controllers for update and rollback, this object is beta. However, it may be subject to name and representation changes in future releases, and clients should not depend on its stability. It is primarily for internal use by controllers.MinDomains indicates a minimum number of eligible domains. When the number of eligible domains with matching topology keys is less than minDomains, Pod Topology Spread treats "global minimum" as 0, and then the calculation of Skew is performed. And when the number of eligible domains with matching topology keys equals or greater than minDomains, this value has no effect on scheduling. As a result, when the number of eligible domains is less than minDomains, scheduler won't schedule more than maxSkew Pods to those domains. If value is nil, the constraint behaves as if MinDomains is equal to 1. Valid values are integers greater than 0. When value is not nil, WhenUnsatisfiable must be DoNotSchedule. For example, in a 3-zone cluster, MaxSkew is set to 2, MinDomains is set to 5 and pods with the same labelSelector spread as 2/2/2: topology contains arbitrary topology information associated with the endpoint. These key/value pairs must conform with the label format. https://kubernetes.io/docs/concepts/overview/working-with-objects/labels Topology may include a maximum of 16 key/value pairs. This includes, but is not limited to the following well known keys: * kubernetes.io/hostname: the value indicates the hostname of the node where the endpoint is located. This should match the corresponding node label. * topology.kubernetes.io/zone: the value indicates the zone where the endpoint is located. This should match the corresponding node label. * topology.kubernetes.io/region: the value indicates the region where the endpoint is located. This should match the corresponding node label. This field is deprecated and will be removed in future api versions.The maximum number of DaemonSet pods that can be unavailable during the update. Value can be an absolute number (ex: 5) or a percentage of total number of DaemonSet pods at the start of the update (ex: 10%). Absolute number is calculated from percentage by rounding up. This cannot be 0 if MaxSurge is 0 Default value is 1. Example: when this is set to 30%, at most 30% of the total number of nodes that should be running the daemon pod (i.e. status.desiredNumberScheduled) can have their pods stopped for an update at any given time. The update starts by stopping at most 30% of those DaemonSet pods and then brings up new DaemonSet pods in their place. Once the new pods are available, it then proceeds onto other DaemonSet pods, thus ensuring that at least 70% of original number of DaemonSet pods are available at all times during the update.RequestResource is the fully-qualified resource of the original API request (for example, v1.pods). If this is specified and differs from the value in "resource", an equivalent match and conversion was performed. For example, if deployments can be modified via apps/v1 and apps/v1beta1, and a webhook registered a rule of `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]` and `matchPolicy: Equivalent`, an API request to apps/v1beta1 deployments would be converted and sent to the webhook with `resource: {group:"apps", version:"v1", resource:"deployments"}` (matching the resource the webhook registered for), and `requestResource: {group:"apps", version:"v1beta1", resource:"deployments"}` (indicating the resource of the original API request). See documentation for the "matchPolicy" field in the webhook configuration type.RequestKind is the fully-qualified type of the original API request (for example, v1.Pod or autoscaling.v1.Scale). If this is specified and differs from the value in "kind", an equivalent match and conversion was performed. For example, if deployments can be modified via apps/v1 and apps/v1beta1, and a webhook registered a rule of `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]` and `matchPolicy: Equivalent`, an API request to apps/v1beta1 deployments would be converted and sent to the webhook with `kind: {group:"apps", version:"v1", kind:"Deployment"}` (matching the rule the webhook registered for), and `requestKind: {group:"apps", version:"v1beta1", kind:"Deployment"}` (indicating the kind of the original API request). See documentation for the "matchPolicy" field in the webhook configuration type for more details.`nominalConcurrencyShares` (NCS) contributes to the computation of the NominalConcurrencyLimit (NominalCL) of this level. This is the number of execution seats available at this priority level. This is used both for requests dispatched from this priority level as well as requests dispatched from other priority levels borrowing seats from this level. The server's concurrency limit (ServerCL) is divided among the Limited priority levels in proportion to their NCS values: NominalCL(i) = ceil( ServerCL * NCS(i) / sum_ncs ) sum_ncs = sum[priority level k] NCS(k) Bigger numbers mean a larger nominal concurrency limit, at the expense of every other priority level. If not specified, this field defaults to a value of 30. Setting this field to zero supports the construction of a "jail" for this priority level that is used to hold some request(s)List of initialization containers belonging to the pod. Init containers are executed in order prior to containers being started. If any init container fails, the pod is considered to have failed and is handled according to its restartPolicy. The name for an init container or normal container must be unique among all containers. Init containers may not have Lifecycle actions, Readiness probes, Liveness probes, or Startup probes. The resourceRequirements of an init container are taken into account during scheduling by finding the highest request/limit for each resource type, and then using the max of that value or the sum of the normal containers. Limits are applied to init containers in a similar fashion. Init containers cannot currently be added or removed. Cannot be updated. More info: https://kubernetes.io/docs/concepts/workloads/pods/init-containers/The application protocol for this port. This is used as a hint for implementations to offer richer behavior for protocols that they understand. This field follows standard Kubernetes label syntax. Valid values are either: * Un-prefixed protocol names - reserved for IANA standard service names (as per RFC-6335 and https://www.iana.org/assignments/service-names). * Kubernetes-defined prefixed names: * 'kubernetes.io/h2c' - HTTP/2 prior knowledge over cleartext as described in https://www.rfc-editor.org/rfc/rfc9113.html#name-starting-http-2-with-prior- * 'kubernetes.io/ws' - WebSocket over cleartext as described in https://www.rfc-editor.org/rfc/rfc6455 * 'kubernetes.io/wss' - WebSocket over TLS as described in https://www.rfc-editor.org/rfc/rfc6455 * Other protocols should use implementation-defined prefixed names such as mycompany.com/my-custom-protocol.ClusterTrustBundle is a cluster-scoped container for X.509 trust anchors (root certificates). ClusterTrustBundle objects are considered to be readable by any authenticated user in the cluster, because they can be mounted by pods using the `clusterTrustBundle` projection. All service accounts have read access to ClusterTrustBundles by default. Users who only have namespace-level access to a cluster can read ClusterTrustBundles by impersonating a serviceaccount that they have access to. It can be optionally associated with a particular assigner, in which case it contains one valid set of trust anchors for that signer. Signers may have multiple associated ClusterTrustBundles; each is an independent set of trust anchors for that signer. Admission control is used to enforce that only users with permissions on the signer can create or modify the corresponding bundle.Expression represents the expression which will be evaluated by CEL. Must evaluate to bool. CEL expressions have access to the contents of the AdmissionRequest and Authorizer, organized into CEL variables: 'object' - The object from the incoming request. The value is null for DELETE requests. 'oldObject' - The existing object. The value is null for CREATE requests. 'request' - Attributes of the admission request(/pkg/apis/admission/types.go#AdmissionRequest). 'authorizer' - A CEL Authorizer. May be used to perform authorization checks for the principal (user or service account) of the request. See https://pkg.go.dev/k8s.io/apiserver/pkg/cel/library#Authz 'authorizer.requestResource' - A CEL ResourceCheck constructed from the 'authorizer' and configured with the request resource. Documentation on CEL: https://kubernetes.io/docs/reference/using-api/cel/ Required.seLinuxMount specifies if the CSI driver supports "-o context" mount option. When "true", the CSI driver must ensure that all volumes provided by this CSI driver can be mounted separately with different `-o context` options. This is typical for storage backends that provide volumes as filesystems on block devices or as independent shared volumes. Kubernetes will call NodeStage / NodePublish with "-o context=xyz" mount option when mounting a ReadWriteOncePod volume used in Pod that has explicitly set SELinux context. In the future, it may be expanded to other volume AccessModes. In any case, Kubernetes will ensure that the volume is mounted only with a single SELinux context. When "false", Kubernetes won't pass any special SELinux mount options to the driver. This is typical for volumes that represent subdirectories of a bigger shared filesystem. Default is "false".Conditions contain conditions for PDB. The disruption controller sets the DisruptionAllowed condition. The following are known values for the reason field (additional reasons could be added in the future): - SyncFailed: The controller encountered an error and wasn't able to compute the number of allowed disruptions. Therefore no disruptions are allowed and the status of the condition will be False. - InsufficientPods: The number of pods are either at or below the number required by the PodDisruptionBudget. No disruptions are allowed and the status of the condition will be False. - SufficientPods: There are more pods than required by the PodDisruptionBudget. The condition will be True, and the number of allowed disruptions are provided by the disruptionsAllowed property.pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is done on a path element by element basis. A path element refers is the list of labels in the path split by the '/' separator. A request is a match for path p if every p is an element-wise prefix of p of the request path. Note that if the last element of the path is a substring of the last element in request path, it is not a match (e.g. /foo/bar matches /foo/bar/baz, but does not match /foo/barbaz). * ImplementationSpecific: Interpretation of the Path matching is up to the IngressClass. Implementations can treat this as a separate PathType or treat it identically to Prefix or Exact path types. Implementations are required to support all path types.matchPolicy defines how the "rules" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook. Defaults to "Exact"matchPolicy defines how the "rules" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the webhook. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the webhook. Defaults to "Equivalent"Must be empty before the object is deleted from the registry. Each entry is an identifier for the responsible component that will remove the entry from the list. If the deletionTimestamp of the object is non-nil, entries in this list can only be removed. Finalizers may be processed and removed in any order. Order is NOT enforced because it introduces significant risk of stuck finalizers. finalizers is a shared field, any actor with permission can reorder it. If the finalizer list is processed in order, then this can lead to a situation in which the component responsible for the first finalizer in the list is waiting for a signal (field value, external system, or other) produced by a component responsible for a finalizer later in the list, resulting in a deadlock. Without enforced ordering finalizers are free to order amongst themselves and are not vulnerable to ordering changes in the list.AllocationMode and its related fields define how devices are allocated to satisfy this request. Supported values are: - ExactCount: This request is for a specific number of devices. This is the default. The exact number is provided in the count field. - All: This request is for all of the matching devices in a pool. At least one device must exist on the node for the allocation to succeed. Allocation will fail if some devices are already allocated, unless adminAccess is requested. If AllocationMode is not specified, the default mode is ExactCount. If the mode is ExactCount and count is not specified, the default count is one. Any other requests must specify this field. This field can only be set when deviceClassName is set and no subrequests are specified in the firstAvailable list. More modes may get added in the future. Clients must refuse to handle requests with unknown modes.FieldSelectorAttributes indicates a field limited access. Webhook authors are encouraged to * ensure rawSelector and requirements are not both set * consider the requirements field if set * not try to parse or consider the rawSelector field if set. This is to avoid another CVE-2022-2880 (i.e. getting different systems to agree on how exactly to parse a query is not something we want), see https://www.oxeye.io/resources/golang-parameter-smuggling-attack for more details. For the *SubjectAccessReview endpoints of the kube-apiserver: * If rawSelector is empty and requirements are empty, the request is not limited. * If rawSelector is present and requirements are empty, the rawSelector will be parsed and limited if the parsing succeeds. * If rawSelector is empty and requirements are present, the requirements should be honored * If rawSelector is present and requirements are present, the request is invalid.LabelSelectorAttributes indicates a label limited access. Webhook authors are encouraged to * ensure rawSelector and requirements are not both set * consider the requirements field if set * not try to parse or consider the rawSelector field if set. This is to avoid another CVE-2022-2880 (i.e. getting different systems to agree on how exactly to parse a query is not something we want), see https://www.oxeye.io/resources/golang-parameter-smuggling-attack for more details. For the *SubjectAccessReview endpoints of the kube-apiserver: * If rawSelector is empty and requirements are empty, the request is not limited. * If rawSelector is present and requirements are empty, the rawSelector will be parsed and limited if the parsing succeeds. * If rawSelector is empty and requirements are present, the requirements should be honored * If rawSelector is present and requirements are present, the request is invalid.PathType determines the interpretation of the Path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is done on a path element by element basis. A path element refers is the list of labels in the path split by the '/' separator. A request is a match for path p if every p is an element-wise prefix of p of the request path. Note that if the last element of the path is a substring of the last element in request path, it is not a match (e.g. /foo/bar matches /foo/bar/baz, but does not match /foo/barbaz). * ImplementationSpecific: Interpretation of the Path matching is up to the IngressClass. Implementations can treat this as a separate PathType or treat it identically to Prefix or Exact path types. Implementations are required to support all path types. Defaults to ImplementationSpecific.pathType determines the interpretation of the path matching. PathType can be one of the following values: * Exact: Matches the URL path exactly. * Prefix: Matches based on a URL path prefix split by '/'. Matching is done on a path element by element basis. A path element refers is the list of labels in the path split by the '/' separator. A request is a match for path p if every p is an element-wise prefix of p of the request path. Note that if the last element of the path is a substring of the last element in request path, it is not a match (e.g. /foo/bar matches /foo/bar/baz, but does not match /foo/barbaz). * ImplementationSpecific: Interpretation of the Path matching is up to the IngressClass. Implementations can treat this as a separate PathType or treat it identically to Prefix or Exact path types. Implementations are required to support all path types. Defaults to ImplementationSpecific.ReservedFor indicates which entities are currently allowed to use the claim. A Pod which references a ResourceClaim which is not reserved for that Pod will not be started. A claim that is in use or might be in use because it has been reserved must not get deallocated. In a cluster with multiple scheduler instances, two pods might get scheduled concurrently by different schedulers. When they reference the same ResourceClaim which already has reached its maximum number of consumers, only one pod can be scheduled. Both schedulers try to add their pod to the claim.status.reservedFor field, but only the update that reaches the API server first gets stored. The other one fails with an error and the scheduler which issued it knows that it must put the pod back into the queue, waiting for the ResourceClaim to become usable again. There can be at most 256 such reservations. This may get increased in the future, but not reduced.matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would not be sent to the ValidatingAdmissionPolicy. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, a request to apps/v1beta1 or extensions/v1beta1 would be converted to apps/v1 and sent to the ValidatingAdmissionPolicy. Defaults to "Equivalent"fieldValidation instructs the server on how to handle objects in the request (POST/PUT/PATCH) containing unknown or duplicate fields. Valid values are: - Ignore: This will ignore any unknown fields that are silently dropped from the object, and will ignore all but the last duplicate field that the decoder encounters. This is the default behavior prior to v1.23. - Warn: This will send a warning via the standard warning response header for each unknown field that is dropped from the object, and for each duplicate field that is encountered. The request will still succeed if there are no other errors, and will only persist the last of any duplicate fields. This is the default in v1.23+ - Strict: This will fail the request with a BadRequest error if any unknown fields would be dropped from the object, or if any duplicate fields are present. The error returned from the server will contain all unknown and duplicate fields encountered.externalTrafficPolicy describes how nodes distribute service traffic they receive on one of the Service's "externally-facing" addresses (NodePorts, ExternalIPs, and LoadBalancer IPs). If set to "Local", the proxy will configure the service in a way that assumes that external load balancers will take care of balancing the service traffic between nodes, and so each node will deliver traffic only to the node-local endpoints of the service, without masquerading the client source IP. (Traffic mistakenly sent to a node with no endpoints will be dropped.) The default value, "Cluster", uses the standard behavior of routing to all endpoints evenly (possibly modified by topology and other features). Note that traffic sent to an External IP or LoadBalancer IP from within the cluster will always get "Cluster" semantics, but clients sending to a NodePort from within the cluster may need to take traffic policy into account when picking a node.loadBalancerClass is the class of the load balancer implementation this Service belongs to. If specified, the value of this field must be a label-style identifier, with an optional prefix, e.g. "internal-vip" or "example.com/internal-vip". Unprefixed names are reserved for end-users. This field can only be set when the Service type is 'LoadBalancer'. If not set, the default load balancer implementation is used, today this is typically done through the cloud provider integration, but should apply for any default implementation. If set, it is assumed that a load balancer implementation is watching for Services with a matching class. Any default load balancer implementation (e.g. cloud providers) should ignore Services that set this field. This field can only be set when creating or updating a Service to type 'LoadBalancer'. Once set, it can not be changed. This field will be wiped when a service is updated to a non 'LoadBalancer' type.expirationSeconds is the requested duration of validity of the issued certificate. The certificate signer may issue a certificate with a different validity duration so a client must check the delta between the notBefore and and notAfter fields in the issued certificate to determine the actual duration. The v1.22+ in-tree implementations of the well-known Kubernetes signers will honor this field as long as the requested duration is not greater than the maximum duration they will honor per the --cluster-signing-duration CLI flag to the Kubernetes controller manager. Certificate signers may not honor this field for various reasons: 1. Old signer that is unaware of the field (such as the in-tree implementations prior to v1.22) 2. Signer whose configured maximum is shorter than the requested duration 3. Signer whose configured minimum is longer than the requested duration The minimum valid value for expirationSeconds is 600, i.e. 10 minutes.matchPolicy defines how the "MatchResources" list is used to match incoming requests. Allowed values are "Exact" or "Equivalent". - Exact: match a request only if it exactly matches a specified rule. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, but "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, the admission policy does not consider requests to apps/v1beta1 or extensions/v1beta1 API groups. - Equivalent: match a request if modifies a resource listed in rules, even via another API group or version. For example, if deployments can be modified via apps/v1, apps/v1beta1, and extensions/v1beta1, and "rules" only included `apiGroups:["apps"], apiVersions:["v1"], resources: ["deployments"]`, the admission policy **does** consider requests made to apps/v1beta1 or extensions/v1beta1 API groups. The API server translates the request to a matched resource API if necessary. Defaults to "Equivalent"IPFamilies is a list of IP families (e.g. IPv4, IPv6) assigned to this service. This field is usually assigned automatically based on cluster configuration and the ipFamilyPolicy field. If this field is specified manually, the requested family is available in the cluster, and ipFamilyPolicy allows it, it will be used; otherwise creation of the service will fail. This field is conditionally mutable: it allows for adding or removing a secondary IP family, but it does not allow changing the primary IP family of the Service. Valid values are "IPv4" and "IPv6". This field only applies to Services of types ClusterIP, NodePort, and LoadBalancer, and does apply to "headless" services. This field will be wiped when updating a Service to type ExternalName. This field may hold a maximum of two entries (dual-stack families, in either order). These families must correspond to the values of the clusterIPs field, if specified. Both clusterIPs and ipFamilies are governed by the ipFamilyPolicy field.reinvocationPolicy indicates whether this webhook should be called multiple times as part of a single admission evaluation. Allowed values are "Never" and "IfNeeded". Never: the webhook will not be called more than once in a single admission evaluation. IfNeeded: the webhook will be called at least one additional time as part of the admission evaluation if the object being admitted is modified by other admission plugins after the initial webhook call. Webhooks that specify this option *must* be idempotent, able to process objects they previously admitted. Note: * the number of additional invocations is not guaranteed to be exactly one. * if additional invocations result in further modifications to the object, webhooks are not guaranteed to be invoked again. * webhooks that use this option may be reordered to minimize the number of additional invocations. * to validate an object after all mutations are guaranteed complete, use a validating admission webhook instead. Defaults to "Never".type determines how the Service is exposed. Defaults to ClusterIP. Valid options are ExternalName, ClusterIP, NodePort, and LoadBalancer. "ClusterIP" allocates a cluster-internal IP address for load-balancing to endpoints. Endpoints are determined by the selector or if that is not specified, by manual construction of an Endpoints object or EndpointSlice objects. If clusterIP is "None", no virtual IP is allocated and the endpoints are published as a set of endpoints rather than a virtual IP. "NodePort" builds on ClusterIP and allocates a port on every node which routes to the same endpoints as the clusterIP. "LoadBalancer" builds on NodePort and creates an external load-balancer (if supported in the current cloud) which routes to the same endpoints as the clusterIP. "ExternalName" aliases this service to the specified externalName. Several other fields do not apply to ExternalName services. More info: https://kubernetes.io/docs/concepts/services-networking/service/#publishing-services-service-typescompletionMode specifies how Pod completions are tracked. It can be `NonIndexed` (default) or `Indexed`. `NonIndexed` means that the Job is considered complete when there have been .spec.completions successfully completed Pods. Each Pod completion is homologous to each other. `Indexed` means that the Pods of a Job get an associated completion index from 0 to (.spec.completions - 1), available in the annotation batch.kubernetes.io/job-completion-index. The Job is considered complete when there is one successfully completed Pod for each index. When value is `Indexed`, .spec.completions must be specified and `.spec.parallelism` must be less than or equal to 10^5. In addition, The Pod name takes the form `$(job-name)-$(index)-$(random-string)`, the Pod hostname takes the form `$(job-name)-$(index)`. More completion modes can be added in the future. If the Job controller observes a mode that it doesn't recognize, which is possible during upgrades due to version skew, the controller skips updates for the Job.Will be used to create a stand-alone PVC to provision the volume. The pod in which this EphemeralVolumeSource is embedded will be the owner of the PVC, i.e. the PVC will be deleted together with the pod. The name of the PVC will be `-` where `` is the name from the `PodSpec.Volumes` array entry. Pod validation will reject the pod if the concatenated name is not valid for a PVC (for example, too long). An existing PVC with that name that is not owned by the pod will *not* be used for the pod to avoid using an unrelated volume by mistake. Starting the pod is then blocked until the unrelated PVC is removed. If such a pre-created PVC is meant to be used by the pod, the PVC has to updated with an owner reference to the pod once the pod exists. Normally this should not be necessary, but it may be useful when manually reconstructing a broken cluster. This field is read-only and no changes will be made by Kubernetes to the PVC after it has been created. Required, must not be nil.volumeAttributesClassName may be used to set the VolumeAttributesClass used by this claim. If specified, the CSI driver will create or update the volume with the attributes defined in the corresponding VolumeAttributesClass. This has a different purpose than storageClassName, it can be changed after the claim is created. An empty string value means that no VolumeAttributesClass will be applied to the claim but it's not allowed to reset this field to empty string once it is set. If unspecified and the PersistentVolumeClaim is unbound, the default VolumeAttributesClass will be set by the persistentvolume controller if it exists. If the resource referred to by volumeAttributesClass does not exist, this PersistentVolumeClaim will be set to a Pending state, as reflected by the modifyVolumeStatus field, until such as a resource exists. More info: https://kubernetes.io/docs/concepts/storage/volume-attributes-classes/ (Beta) Using this field requires the VolumeAttributesClass feature gate to be enabled (off by default).RestartPolicy defines the restart behavior of individual containers in a pod. This field may only be set for init containers, and the only allowed value is "Always". For non-init containers or when this field is not specified, the restart behavior is defined by the Pod's restart policy and the container type. Setting the RestartPolicy as "Always" for the init container will have the following effect: this init container will be continually restarted on exit until all regular containers have terminated. Once all regular containers have completed, all init containers with restartPolicy "Always" will be shut down. This lifecycle differs from normal init containers and is often referred to as a "sidecar" container. Although this init container still starts in the init container sequence, it does not wait for the container to complete before proceeding to the next init container. Instead, the next init container starts immediately after this init container is started, or after any startupProbe has successfully completed.Error describes any problems reconciling the Spec.ConfigSource to the Active config. Errors may occur, for example, attempting to checkpoint Spec.ConfigSource to the local Assigned record, attempting to checkpoint the payload associated with Spec.ConfigSource, attempting to load or validate the Assigned config, etc. Errors may occur at different points while syncing config. Earlier errors (e.g. download or checkpointing errors) will not result in a rollback to LastKnownGood, and may resolve across Kubelet retries. Later errors (e.g. loading or validating a checkpointed config) will result in a rollback to LastKnownGood. In the latter case, it is usually possible to resolve the error by fixing the config assigned in Spec.ConfigSource. You can find additional information for debugging by searching the error message in the Kubelet log. Error is a human-readable description of the error state; machines can check whether or not Error is empty, but should not rely on the stability of the Error text across Kubelet versions.ephemeral represents a volume that is handled by a cluster storage driver. The volume's lifecycle is tied to the pod that defines it - it will be created before the pod starts, and deleted when the pod is removed. Use this if: a) the volume is only needed while the pod runs, b) features of normal volumes like restoring from snapshot or capacity tracking are needed, c) the storage driver is specified through a storage class, and d) the storage driver supports dynamic volume provisioning through a PersistentVolumeClaim (see EphemeralVolumeSource for more information on the connection between this volume type and PersistentVolumeClaim). Use PersistentVolumeClaim or one of the vendor-specific APIs for volumes that persist for longer than the lifecycle of an individual pod. Use CSI for light-weight local ephemeral volumes if the CSI driver is meant to be used that way - see the documentation of the driver for more information. A pod can use both types of ephemeral volumes and persistent volumes at the same time.----AdlmAfakAghbAhomArabAranArmiArmnAvstBaliBamuBassBatkBengBhksBlisBopoBrahBraiBugiBuhdCakmCansCariChamCherChrsCirtCoptCpmnCprtCyrlCyrsDevaDiakDogrDsrtDuplEgydEgyhEgypElbaElymEthiGeokGeorGlagGongGonmGothGranGrekGujrGuruHanbHangHaniHanoHansHantHatrHebrHiraHluwHmngHmnpHrktHungIndsItalJamoJavaJpanJurcKaliKanaKawiKharKhmrKhojKitlKitsKndaKoreKpelKthiLanaLaooLatfLatgLatnLekeLepcLimbLinaLinbLisuLomaLyciLydiMahjMakaMandManiMarcMayaMedfMendMercMeroMlymModiMongMoonMrooMteiMultMymrNagmNandNarbNbatNewaNkdbNkgbNkooNshuOgamOlckOrkhOryaOsgeOsmaOugrPalmPaucPcunPelmPermPhagPhliPhlpPhlvPhnxPiqdPlrdPrtiPsinQaaaQaabQaacQaadQaaeQaafQaagQaahQaaiQaajQaakQaalQaamQaanQaaoQaapQaaqQaarQaasQaatQaauQaavQaawQaaxQaayQaazQabaQabbQabcQabdQabeQabfQabgQabhQabiQabjQabkQablQabmQabnQaboQabpQabqQabrQabsQabtQabuQabvQabwQabxRanjRjngRohgRoroRunrSamrSaraSarbSaurSgnwShawShrdShuiSiddSindSinhSogdSogoSoraSoyoSundSunuSyloSyrcSyreSyrjSyrnTagbTakrTaleTaluTamlTangTavtTeluTengTfngTglgThaaThaiTibtTirhTnsaTotoUgarVaiiVispVithWaraWchoWoleXpeoXsuxYeziYiiiZanbZinhZmthZsyeZsymZxxxZyyyZzzz